90W Constant Voltage PWM Output LED Driver

Letoto la PWM-90

---

Buka ea Mosebelisi

 

                   
(bakeng sa DA2-Type feela) (bakeng sa Mofuta oa DA feela)

       
Kenyeletso ea AC: 100-240Vac
(bakeng sa DA2-Type feela)

(CCC ea boikhethelo)

(bakeng sa 12, 24, 48, Mofuta o se nang letho feela)

           
(bakeng sa DA2 le Mofuta o se nang letho)

■ Likarolo

• Kamehla Voltage PWM setaele tlhahiso
• Sesebelisoa sa mabone a tšohanyetso se fumaneha ho latela IEC61347-2-13
• Ts'ebetso ea PFC e hahiloeng kahare le moralo oa sehlopha sa II
• Sehlopha sa 2 sa matla (ntle le PWM-90-12)
• Ha ho tšebeliso ea matla a matla <0.5W
• E koahetsoe ka botlalo le boemo ba IP67
• Mosebetsi: 3 ho 1 dimming (dim-to-off); DALI/DALI-2
• Boemo bo tlase ba dimming 0.2% bakeng sa mofuta oa DALI
• Nako e tloaelehileng ea bophelo> lihora tse 50000 le waranti ea lilemo tse 5

■ Lisebelisoa

• Leseli la lebone la LED
• Lebone la LED le ka hare
• Leseli le khabisitsoeng ka LED
• Leseli la mehaho ea LED
• Mabone a indasteri

■ GTIN KHOUTU

MW Search: https://www.meanwell.com/serviceGTIN.aspx

■ Tlhaloso

Letoto la PWM-90 ke mokhanni oa LED oa 90W LED AC/DC LED e nang le matla a sa feleng.tage nang le PWM style output, e khonang ho boloka homogeneity e khanyang ha e khanna mefuta eohle ea mefuta e mengata ea LED.tage pakeng tsa 12V le 48V. Ka lebaka la ts'ebetso e phahameng ho fihlela ho 90.5%, ka moralo o se nang fan, letoto lohle le khona ho sebetsa bakeng sa mocheso oa -40 ° C ~ +85 ° C tlas'a convection ea mahala ea moea. Letoto lohle le fuoe maemo a ts'ireletso ea IP67 'me le loketse ho sebetsa bakeng sa ho omella, damp kapa libaka tse metsi. PWM-90 e na le ts'ebetso ea dimming e fetolang potoloho ea mosebetsi oa tlhahiso, e fana ka phetoho e kholo bakeng sa lisebelisoa tsa lisebelisoa tsa LED.

■ Khouto ea Mohlala

1. Likhetho tsa mosebetsi
2. Rated khumo voltage (12/24/36/48V)
3. E lekantsoe wattage
4. Lebitso la letoto

Mofuta	Boemo ba IP	Mosebetsi	Hlokomela
Ha ho letho	IP67	3 ho 1 ts'ebetso ea dimming (0 ~ 10Vdc, 10V PWM lets'oao le khanyetso)	E teng thepeng e teng ka lebenkeleng
DA	IP67	Theknoloji ea taolo ea DALI (bakeng sa 12V/24V e nang le mofuta oa DA feela)	E teng thepeng e teng ka lebenkeleng
DA2	IP67	Theknoloji ea taolo ea DALI-2(bakeng sa 12V/24V/48V e nang le mofuta oa DA2 feela)	E teng thepeng e teng ka lebenkeleng

TS'ELISO

MOHLALA		EA-90-PW	EA-90-PW	EA-90-PW	EA-90-PW
SEHLOOHO	DC VOLTAGE	12V	24V	36V	48V
	RETŠELISITSOE NKHOANE	7.5A	3.75A	2.5A	1.88A
	REKETSO MATLA	90W	90W	90W	90.24W
	LIEKETSENG DIMM	0 ~ 100%
	MAIKETLO A PWM (Mofuta.)	1.47kHz bakeng sa Blank/DA-Type, 2.5kHz bakeng sa DA2-Type
	HLOMA, PHAHAMA NAKO Ela hloko.2 Hlokomela.9	500ms, 80ms/115VAC kapa 230VAC
	NAKO EA HO PHETHA (Mofuta.)	16ms / 115VAC kapa 230VAC
KEKETSO	TLHOKOMELOTAGE RANGE Hlokomela. 3	90 ~ 305VAC 127 ~ 431VDC (Ka kopo, sheba karolo ea "STATIC CHARACTERISTIC")
	MOEKETSENG MAKOANE	47 ~ 63Hz
	SEBETSO SA MATLA (Typ.)	PF> 0.98 / 115VAC, PF> 0.96 / 230VAC, PF> 0.92 / 277VAC @ mojaro o felletseng (Ka kopo, sheba karolo ea "POWER FACTOR (PF) CHARACTERISTIC")
	PHETHAHETSO EA HARMONIC	THD<20%(@load≧60%/115VAC, 230VAC; @load≧75%/277VAC) (Ka kopo sheba karolong ea "TOTAL HARMONIC DISTORTION")
	KATLEHO (Mofuta.)	88%	90.5%	90.5%	90.5%
	AC CURRENT (Mofuta.)	0.95A / 115VAC 0.5A / 230VAC 0.4A / 277VAC
	INRUSH CURRENT (Mofuta.)	COLD QALA 60A(twidth=550 μs e lekantsoeng ho 50% Ipeak) ho 230VAC; Ho latela NEMA 410
	MAX. NO. ea li-PSU ho 16A CIRCUIT BREAKER	Li-unit tse 3 (sekhechana sa potoloho ea mofuta oa B) / likarolo tse 6 (sekheo sa potoloho sa mofuta oa C) ho 230VAC
	LEAKAGE NKHOANE	<0.25mA / 277VAC
	HA HO MOJARO TSEBE	<0.5W
TS'IRELETSO	KHAHLISA	108 ~ 130% e lekantsoe matla a tlhahiso
		Hiccup mode, e hlaphoheloa ka bo eona ka mor'a hore boemo ba phoso bo tlosoe
	POTOLOHO E KHUTSOANE	Koala o/p voltage, bula hape matla a ho hlaphoheloa (ntle le mofuta oa DA2) Hiccup mode, e hlaphoheloa ka bo eona ka mor'a hore boemo ba phoso bo tlosoe (feela bakeng sa mofuta oa DA2)
	KHAHLISO SEFOLITAGE	15 ~ 17V	28 ~ 34V	41 ~ 46V	54 ~ 60V
		Koala o/p voltage, matlafatsa hape ho fola
	PHEKO MOCHESO	Koala o/p voltage, matlafatsa hape ho fola
TIKOLOHO	MOSEBETSI TEMPELA.	Tcase=-40 ~ +85℃ (Ka kopo, sheba karolo ea “ OUTPUT LOAD vs TEMPERATURE”)
	MAX. TLHALOSO TEMPE.	Mokotlana = + 85 ℃
	MOSEBETSI MOKOBELO	20 ~ 95% RH e sa lumellaneng
	POLOKO TEMP., MONATE	-40 ~ + 80 ℃, 10 ~ 95% RH
	MOEKETSI. TIISETSO MOKHOA	± 0.03% / ℃ (0 ~ 50 ℃)
	TSIETSO	10 ~ 500Hz, 5G 12min./1cycle, nako ea 72min. e 'ngoe le e 'ngoe e bapile le lilepe tsa X, Y, Z
TŠIRELETSO LE EMC	MAEMO A TŠIRELETSO Ela hloko.5	UL8750(ntle le DA-Type), CSA C22.2 No. 250.13-12; ENEC BS EN/EN61347-1, BS EN/EN61347-2-13 e ikemetseng, BS EN/EN62384, IP67,BIS IS15885(bakeng sa 12,24,48 Mofuta o se nang letho feela), EAC TP TC 004,GB19510.1, GB19510.14. 60335 e amohetsoe; Moralo o bua ka BS EN/EN1-61347;Ho ea ka BS EN/EN2-13-100 sehlomathiso J se loketseng ho kenngoa ha maemo a tšohanyetso(EL)(AC Input: 240-2Vac)(bakeng sa DAXNUMX-Type feela)
	DALI LITEKELO	IEC62386-101, 102, 207,251 bakeng sa DA/DA2-Mofuta feela, Mofuta oa sesebelisoa 6(DT6)
	EMELANG KOLOKOTAGE	I/PO/P:3.75KVAC; I/P-DA:1.5KVAC; O/P-DA:1.5KVAC
	HO IKAOA KHANYETSO	I/PO/P: 100M Ohms / 500VDC / 25℃/ 70% RH
	TLHOKOMELISO EA EMC.6	Ho latela BS EN / EN55015, BS EN / EN61000-3-2 Sehlopha sa C (@ mojaro ≧ 60%); BS EN / EN61000-3-3, GB17743 le GB17625.1, EAC TP TC 020
	TSIETSI EMC	Ho lumellana le BS EN/EN61000-4-2,3,4,5,6,8,11; BS EN/EN61547, boemo ba indasteri e bobebe (surge immunity Line-Line 2KV), EAC TP TC 020
BA BANG	MTBF	2394.5K lihora tsa metsotso. Telcordia SR-332 (Bellcore); 224.2K lihora tse mets. MIL-HDBK-217F (25℃)
	TŠEBELETSO	171*63*37.5mm (L*W*H)
	PAKA	0.77Kg; 18pcs / 14.9Kg / 0.97CUFT
HLOKOMELA	1. Litekanyetso tsohle HA li boleloe ka ho khetheha li lekantsoe ka 230VAC, e lekantsoe hona joale le 25 ° C ea mocheso o potolohileng. 2. Ho ka 'na ha hlokahala hore ho fokotsoe tekanyo tlas'a phallo e tlaase ea voltages. Ka kopo sheba likarolo tsa "STATIC CHARACTERISTIC" ho fumana lintlha. 3. Bolelele ba nako ea ho seta bo lekantsoe qalong e batang. Ho bulela/KOMELA mokhanni ho ka lebisa keketsehong ea nako ea ho seta. 4. Mokhanni o nkoa e le karolo e tla sebetsoa hammoho le thepa ea ho qetela. Kaha ts'ebetso ea EMC e tla angoa ke ho kengoa ka botlalo, baetsi ba lisebelisoa tsa ho qetela ba tlameha ho fumana lengolo la EMC Directive mabapi le ts'ebetso e felletseng hape. 5. Letoto lena le kopana le tebello ea bophelo e tloaelehileng ea> lihora tsa 50,000 tsa ts'ebetso ha Tcase, haholo-holo (TC) ntlha (kapa TMP, ka DLC), e ka bang 75 ° C kapa ka tlase. 6. Ka kopo sheba setatemente sa tiisetso ho MEAN WELL's website at http://www.meanwell.com 7. Thempereichara e fokotsehileng ea 3.5°C/1000m e nang le mefuta e se nang fan le ea 5°C/1000m e nang le mefuta ea fene bakeng sa bophahamo ba ho sebetsa ho feta 2000m(6500ft). 8. Bakeng sa tlhokomeliso efe kapa efe ea kopo le tlhokomeliso ea ts'ebetso ea ts'ebetso ea bopaki ba metsi ea IP, ka kopo sheba bukana ea rona ea mosebelisi pele u e sebelisa. https://www.meanwell.com/Upload/PDF/LED_EN.pdf 9. E ipapisitse le matla a IEC 62386-101 / 102 DALI mabapi le melao ea nako le tšitiso, nako e behiloeng e hloka ho lekoa ka molaoli oa DALI ea ka tšehetsang matla a DALI mosebetsing, ho seng joalo nako ea ho seta e tla ba e phahameng ho feta 0.5 motsotsoana Mofuta oa DA. ※ Boitlhotlhollo ba Boikarabelo ba Sehlahisoa : Bakeng sa tlhaiso-leseling e batsi, ka kopo sheba ho https://www.meanwell.com/serviceDisclaimer.aspx

■ TŠEBELETSO EA HO FUMANA

1. AC/L(Sootho)
2. AC/N(Boputsoa)
3. DIM+(Phelese)*
4. DIM-(Pinki)**
5. Vo+(Khubelu)
6. Vo-(Ntšo)

* DIM + bakeng sa Mofuta o se nang letho
DA+ bakeng sa mofuta oa DA/DA2
* *DIM- bakeng sa Mofuta o se nang letho
DA- bakeng sa DA/DA2-mofuta
File Lebitso: PWM-90-SPEC 2022-11-28
TLHOKOMELISO: DA /DA2-Type ha e khetholle lipakeng tsa "+" le "-".

※ Molao-motheo oa ho fifala bakeng sa tlhahiso ea setaele sa PWM
• Ho fifala ho finyelloa ka ho fetola potoloho ea mosebetsi oa hona joale.

Output DC jwale

Potoloho ea mosebetsi(%) = T ON/T ×100%

Poelo ya PWM : 1.47kHz bakeng sa Blank/DA-Type, 2.5kHz bakeng sa DA2-Type

※ 3 ho ts'ebetso e le 'ngoe ea dimming (bakeng sa Mofuta o se nang letho)

• Sebelisa o mong oa mekhoa e meraro lipakeng tsa DIM+ le DIM-: 0 ~ 10VDC, kapa 10V PWM lets'oao kapa khanyetso.
• Mohloli o ntseng o fokotseha ho tloha phepelong ea motlakase: 100μA (mofuta.)

◎ Ho sebelisa tlatsetso 0 ~ 10VDC

1. Lisebelisoa tsa LED
2. Keketso Moqtage
3. "U SE KE UA hokela "DIM- ho Vo-"
4. Duty cycle of output current (%)
5. Kenyelletso ea ho fifala: Molumo oa ho eketsatage

◎ Ho kenya lets'oao la tlatsetso la 10V PWM (maqhubu a maqhubu a 100Hz ~ 3KHz):

1. Lisebelisoa tsa LED
2. Letšoao la PWM la tlatsetso
3. "U SE KE UA hokela "DIM- ho Vo-"
4. Duty cycle of output current (%)
5. Potoloho ea mosebetsi oa kenyelletso ea 10V PWM ea ho fifala ha lets'oao

◎ Ho sebelisa khanyetso ea tlatsetso:

1. Lisebelisoa tsa LED
2. Keketso Resistance
3. "U SE KE UA hokela "DIM- ho Vo-"
4. Duty cycle of output current (%)
5. (N=bongata ba mokhanni bakeng sa ts'ebetso ea ho fifala e hokahaneng) Kenyelletso ea ho fifatsa: Keketso ea ho hanyetsa

Hlokomela :

1. Min. duty cycle of output current e ka ba 0.15%, mme dimming input e ka ba 6KΩ kapa 0.6VDC, kapa 10V PWM signal with 6% duty cycle.
2. Mosebetsi oa potoloho ea tlhahiso ea hona joale o ka theohela ho 0% ha tlhahiso ea dimming e le ka tlase ho 6KΩ kapa ka tlase ho 0.6VDC, kapa 10V PWM pontšo e nang le potoloho ea mosebetsi e ka tlaase ho 6%.

※ DALI Interface (lehlakore la mantlha; bakeng sa DA/DA2-Type)

• Kenya lets'oao la DALI lipakeng tsa DA+ le DA-.
• Protocol ea DALI e na le lihlopha tse 16 le liaterese tse 64.
• Mohato oa pele o tsitsitse ho 0.2% ea tlhahiso

■ OUTPUT LOAD vs TEMPERATURE

Moroalo (%)    
AMBIENT TEMPERATURE,Ta (℃)

Moroalo (%)
Tcase (℃)

■ TŠEBELETSO EA STATIC

Moroalo (%)
KEKETSO MOLAPOTAGE (V) 60Hz

■ TLHAKISO EA MATLA (PF) CHARACTERISTIC

※ Tcase ho 75 ℃

PF
MOJALO

※De-rating e ea hlokahala tlasa phallo e tlase ea voltage.

■ TOTAL HARMONIC DISTORTION (THD)

Moetso oa 48V, Tcase ho 75 ℃

THD
MOJALO

■ SEBELISA HO HLOKAHALA vs MORORO

Letoto la PWM-90 le na le ts'ebetso e phahameng ea ts'ebetso hoo ho ka fihleloang ho fihla ho 90.5% lits'ebetsong tsa masimong.

Moetso oa 48V, Tcase ho 75 ℃

SEBELISA(%)
MOJALO

■ NAKO YA BOPHELO

BOPHELO NAKO(Kh)
Tcase (℃)

■ Block Diagram

Fosc ea PFC: 50 ~ 120KHz
Fosc ea PWM: 60 ~ 130KHz

1. EMI MOTS'ELISI
2. PFC TS'ELISO
3. HO FETOHA MATLA
4. LITLHAKISO LE SEHLA
5. TS'ELISO TS'OOLO
6. OLP
7. LEMOHANG LETS'OA
8. OVP
9. PWM & PFC LAOLI
10. OTP

■ Tlhaloso ea Mechini

Case No. PWM-90P Unit: mm

Mofuta-Mofuta

• (tc): Max. Case Mocheso

1. AC/L(Sootho)
2. AC/N(Boputsoa)
3. SJTW 18AWG×2C
4. UL2464 18AWG×2C
5. SJTW 16AWG×2C
6. DIM+(Phelese)*
7. DIM-(Pinki)**
8. Vo+(Khubelu)
9. Vo-(Ntšo)

DA/DA2-Mofuta

• (tc): Max. Case Mocheso

1. AC/L(Sootho)
2. AC/N(Boputsoa)
3. SJOW 17AWG×2C&H05RN-F1.0mm2
4. UL2464 18AWG×2C
5. SJOW 17AWG×2C&H05RN-F1.0mm2
6. DA+(Pheporese)*
7. DA-(Pinki)**
8. Vo+(Khubelu)
9. Vo-(Ntšo)

HLOKOMELA: Mofuta oa DA/DA2 ha o khetholle lipakeng tsa "+" le "-".

■ Khothaletsa Mounting Direction

■ Buka ea ho kenya

◎ Khokahano bakeng sa mofuta oa Blank

1. AC/L(SOTHO)
2. AC/N(BUPUTSO)
3. DIM-(PINK)
4. DIM+(PURPLE)
5. -V(BLACK)
6. +V(RED)
7. 0 ~ 10Vdc kapa 10V PWM
   kapa ho hanyetsa Dimmer
   kapa DALI Dimmer
8. Letlapa la LED

Litemoso

• Pele o qala mosebetsi ofe kapa ofe oa ho kenya kapa oa ho lokisa, ka kopo, khaola motlakase ho sesebelisoa. Netefatsa hore e ke ke ea kopanngoa hape ka phoso!
• Boloka moea o nepahetseng ho potoloha yuniti 'me u se ke ua beha ntho leha e le efe holim'a eona. Hape sebaka sa 10-15 cm se tlameha ho bolokoa ha sesebelisoa se haufi e le mohloli oa mocheso.
• Maemo a ho fanyeha ntle le a tloaelehileng kapa a sebetsa tlas'a mocheso o phahameng oa tikoloho a ka eketsa mocheso oa karolo ea ka hare 'me ho tla hloka hore ho fokotsoe tekanyo ea tlhahiso ea hona joale.
• Lintlha tsa hajoale tsa thapo e amohetsoeng ea mantlha / ea bobeli e lokela ho ba kholo ho feta kapa e lekane le ea yuniti. Ka kopo sheba litlhaloso tsa eona.
• Bakeng sa bakhanni ba LED ba nang le likhokahano tse sa keneleng metsi, netefatsa hore khokahano lipakeng tsa yuniti le sesebelisoa sa mabone e tiile e le hore metsi a se ke a kenella tsamaisong.
• Bakeng sa bakhanni ba LED ba sa khoneng ho tima, etsa bonnete ba hore sesebelisoa sa hau sa dimming se khona ho khanna likarolo tsena. Letoto la PWM le hloka 0.15mA yuniti ka 'ngoe.
• Tc max. e khetholloa holim'a leibole ea sehlahisoa. Ka kopo etsa bonnete ba hore mocheso oa ntlha ea Tc o ke ke oa feta moeli.
• U SE KE UA hokela "DIM- to Vo-".
• E loketse ts'ebeliso ea kahare kapa ts'ebeliso ea kantle ntle le khanya ea letsatsi e tobileng. Ka kopo qoba ho qoelisoa metsing ka metsotso e 30.
• Phepelo ea motlakase e nkuoa e le karolo e tla sebetsoa hammoho le lisebelisoa tsa ho qetela. Kaha ts'ebetso ea EMC e tla angoa ke ho kengoa ka botlalo, baetsi ba lisebelisoa tsa ho qetela ba tlameha ho fumana lengolo la EMC Directive mabapi le ts'ebetso e felletseng hape.

File Lebitso: PWM-90-SPEC 2022-11-28

E jarollotsoe ho tsoa Arrow.com.

Litokomane / Lisebelisoa

	HO BOLELA HONA PWM-90 Series 90W Constant Voltage PWM Output LED Driver [pdf] Buka ea Mong'a PWM-90 Series 90W Constant Voltage PWM Output LED Driver, PWM-90 Series, 90W Constant Voltage PWM Output LED Driver, Moqtage PWM Output LED Driver, PWM Output LED Driver, Output LED Driver, LED Driver
	HO BOLELA HONA PWM-90 Series 90W Constant Voltage PWM Output LED Driver [pdf] Buka ea Mong'a PWM-90 Series 90W Constant Voltage PWM Output LED Driver, PWM-90 Series, 90W Constant Voltage PWM Output LED Driver, Constant Voltage PWM Output LED Driver, Moqtage PWM Output LED Driver, PWM Output LED Driver, Output LED Driver, LED Driver, Driver

Litšupiso

• Bukana ea Mosebelisi