HO BOLELA HAHOLO PWM-90 90W Constant Voltage PWM Output LED Driver
90W Constant Voltage PWM Output LED Driver
PWM -90 letoto
Likaroloana
- Kamehla Voltage PWM setaele tlhahiso
- Sesebelisoa sa mabone a tšohanyetso se fumaneha ho latela IEC61347-2-13
- Ts'ebetso ea PFC e hahiloeng kahare le moralo oa sehlopha sa II
- Sehlopha sa 2 sa matla (ntle le PWM-90-12)
- Ha ho tšebeliso ea matla a matla <0.5W
- E koahetsoe ka botlalo le boemo ba IP67
- Mosebetsi: 3 ho 1 dimming (dim-to-off); DALI/DALI-2
- Boemo bo tlase ba dimming 0.2% bakeng sa mofuta oa DALI
- Nako e tloaelehileng ea bophelo> lihora tse 50000 le waranti ea lilemo tse 5
Lisebelisoa
- Leseli la lebone la LED
- Lebone la LED le ka hare
- Leseli le khabisitsoeng ka LED
- Leseli la mehaho ea LED
- Mabone a indasteri
Tlhaloso
Letoto la PWM-90 ke mokhanni oa LED oa 90W LED AC/DC LED e nang le matla a sa feleng.tage nang le tlhahiso ea setaele sa PWM, e khonang ho boloka homogeneity e khanyang ha e khanna mefuta eohle ea likhoele tsa LED. PWM-90 e sebetsa ho tloha ho 90 ~ 305VAC 'me e fana ka mefuta e nang le mefuta e fapaneng ea litekanyetsotage pakeng tsa 12V le 48V. Ka lebaka la ts'ebetso e phahameng ho fihlela ho 90.5%, ka moralo o se nang fan, letoto lohle le khona ho sebetsa bakeng sa mocheso oa -40C + 85 C tlas'a convection ea mahala ea moea. Letoto lohle le fuoe maemo a ts'ireletso ea IP67 'me le loketse ho sebetsa bakeng sa ho omella, damp kapa libaka tse metsi. PWM-90 e na le ts'ebetso ea dimming e fetolang potoloho ea mosebetsi oa tlhahiso, e fana ka phetoho e kholo bakeng sa lisebelisoa tsa lisebelisoa tsa LED.
Moetso oa khouto ea mohlala
TS'ELISO
MOSEBETSI OA DIMMING
- Sebelisa o mong oa mekhoa e meraro lipakeng tsa DIM+ le DIM-: 0 ~ 10VDC, kapa 10V PWM lets'oao kapa khanyetso.
- Mohloli o ntseng o fokotseha ho tloha phepelong ea motlakase: 100μA (mofuta.)
Hlokomela :
- Min. duty cycle of output current e ka ba 0.15%, mme dimming input e ka ba 6KΩ kapa 0.6VDC, kapa 10V PWM signal with 6% duty cycle.
- Mosebetsi oa potoloho ea tlhahiso ea hona joale o ka theohela ho 0% ha tlhahiso ea dimming e le ka tlase ho 6KΩ kapa ka tlase ho 0.6VDC, kapa 10V PWM pontšo e nang le potoloho ea mosebetsi e ka tlaase ho 6%.
DALI Interface (lehlakore la mantlha; bakeng sa DA/DA2-Type)
- Kenya lets'oao la DALI lipakeng tsa DA+ le DA-.
- Protocol ea DALI e na le lihlopha tse 16 le liaterese tse 64.
- Mohato oa pele o tsitsitse ho 0.2% ea tlhahiso
OUTPUT LOAD vs TEMPERATURE
- TŠOANELO STATIC
- MATLA (PF) TŠEBELETSO
PUSELETSO EA TSOHLE EA HARMONIC (THD)
KATLEHO vs MOJARO
Letoto la PWM-90 le na le ts'ebetso e phahameng ea ts'ebetso hoo ho ka fihleloang ho fihla ho 90.5% lits'ebetsong tsa masimong.
BOPHELONG
Setšoantšo se Thibeloang
Tlhaloso ea Mechini
Khothaletsa Tataiso ea ho Nyoloha
Bukana ea ho kenya
Litemoso
- Pele o qala mosebetsi ofe kapa ofe oa ho kenya kapa oa ho lokisa, ka kopo, khaola motlakase ho sesebelisoa. Netefatsa hore e ke ke ea kopanngoa hape ka phoso!
- Boloka moea o nepahetseng ho potoloha yuniti 'me u se ke ua beha ntho leha e le efe holim'a eona. Hape sebaka sa 10-15 cm se tlameha ho bolokoa ha sesebelisoa se haufi e le mohloli oa mocheso.
- Maemo a ho fanyeha ntle le a tloaelehileng kapa a sebetsa tlas'a mocheso o phahameng oa tikoloho a ka eketsa mocheso oa karolo ea ka hare 'me ho tla hloka hore ho fokotsoe tekanyo ea tlhahiso ea hona joale.
- Lintlha tsa hajoale tsa thapo e amohetsoeng ea mantlha / ea bobeli e lokela ho ba kholo ho feta kapa e lekane le ea yuniti. Ka kopo sheba litlhaloso tsa eona.
- Bakeng sa bakhanni ba LED ba nang le likhokahano tse sa keneleng metsi, netefatsa hore khokahano lipakeng tsa yuniti le sesebelisoa sa mabone ke
e tiileng e le hore metsi a se ke a kenella tsamaisong. - Bakeng sa bakhanni ba LED ba timang, etsa bonnete ba hore selaoli sa hau sa dimming se khona ho khanna likarolo tsena.PWM series e hloka 0.15mA unit ka 'ngoe.
- Tc max. e khetholloa holim'a leibole ea sehlahisoa. Ka kopo etsa bonnete ba hore mocheso oa ntlha ea Tc o ke ke oa feta moeli.
- U SE KE UA hokela "DIM- to Vo-".
- E loketse ts'ebeliso ea kahare kapa ts'ebeliso ea kantle ntle le khanya ea letsatsi e tobileng. Ka kopo qoba ho qoelisoa metsing ka metsotso e 30.
- Phepelo ea motlakase e nkuoa e le karolo e tla sebetsoa hammoho le lisebelisoa tsa ho qetela. Kaha ts'ebetso ea EMC e tla angoa ke ho kengoa ka botlalo, baetsi ba lisebelisoa tsa ho qetela ba tlameha ho fumana lengolo la EMC Directive mabapi le ts'ebetso e felletseng hape.
Litokomane / Lisebelisoa
 |
HO BOLELA HAHOLO PWM-90 90W Constant Voltage PWM Output LED Driver [pdf] Buka ea Taelo PWM-90, 90W Constant Voltage PWM Output LED Driver, PWM Output LED Driver, 90W Constant Voltage Mokhanni oa LED, Mokhanni oa LED |
