HO BOLELA HONA PWM-120 Series 120W Constant Voltage PWM Output LED Driver User Manual

HO BOLELA HONA PWM-120 Series 120W Constant Voltage PWM Output LED Driver User Manual

Likaroloana

Kamehla voltage PWM setaele tlhahiso.

Sesebelisoa sa mabone a tšohanyetso se fumaneha ho latela IEC61347-2-13.
Ts'ebetso ea PFC e hahiloeng kahare le moralo oa sehlopha sa Il

Ha ho tšebeliso ea matla a boima <0.5W/ tšebeliso ea matla a standby <0.5W(DA/DA2-mofuta)
E koahetsoe ka botlalo le boemo ba IP67

Likhetho tsa mosebetsi: 3 ho 1 dimming (dim-to-off); DALI/DALI-2
Boemo bo tlase ba dimming 0.2% bakeng sa mofuta oa DALI

Nako e tloaelehileng ea bophelo> lihora tse 50000 le waranti ea lilemo tse 5

Lisebelisoa

Leseli la lebone la LED
Lebone la LED le ka hare

Leseli le khabisitsoeng ka LED
Leseli la mehaho ea LED

Mabone a indasteri
Tlanya "HL" bakeng sa ho sebelisoa sehlopheng |, division 2 hazardous (classified) sebaka.

GTIN KHOUTU

MW Search: https://www.meanwell.com/serviceGTIN.aspx

Litaba pata

1 Tlhaloso

2 TS'ELISO

3 MOSEBETSI OA DIMMING

4 OUTPUT LOAD vs TEMPERATURE

5 Litokomane / Lisebelisoa

5.1 Litšupiso

6 Related Posts

Tlhaloso

Letoto la PWM-120 ke mokhanni oa LED oa 120W AC/DC o nang le matla a sa feleng.tage nang le tlhahiso ea setaele sa PWM,
e khonang ho boloka mocheso oa 'mala le khanya ea homogeneity ha o khanna mefuta eohle ea lihlopha tsa LED. PWM-120 e sebetsa ho tloha ho 90 ~ 305VAC 'me e fana ka mefuta e nang le mefuta e fapaneng ea litekanyetso.tage pakeng tsa 12V le 48V. Ka lebaka la ts'ebetso e phahameng ho fihlela ho 90.5%, ka moralo o se nang fan, letoto lohle le khona ho sebetsa bakeng sa mocheso oa -40 ° C ~ +90 ° C tlas'a convection ea mahala ea moea. Letoto lohle le fuoe maemo a ts'ireletso ea IP67 'me le loketse ho sebetsa bakeng sa ho omella, damp kapa libaka tse metsi. PWM-120 e na le ts'ebetso ea dimming e fetolang potoloho ea mosebetsi oa tlhahiso, e fana ka phetoho e kholo bakeng sa lisebelisoa tsa lisebelisoa tsa LED.

Moetso oa khouto ea mohlala

Mofuta	Boemo ba IP	Mosebetsi	Hlokomela
Ha ho letho	IP67	3 ho 1 ts'ebetso ea dimming (0 ~ 10Vdc, 10V PWM lets'oao le khanyetso)	E teng thepeng e teng ka lebenkeleng
DA	IP67	Theknoloji ea taolo ea DALI.(bakeng sa mofuta oa 12V/24V DA feela)	E teng thepeng e teng ka lebenkeleng
DA2	IP67	Theknoloji ea taolo ea DALI-2.(bakeng sa 12V/24V e nang le Mofuta oa DA2 feela)	E teng thepeng e teng ka lebenkeleng

TS'ELISO

MOHLALA		EA-120-PW	EA-120-PW	EA-120-PW	EA-120-PW
SEHLOOHO	DC VOLTAGE	12V	24V	36V	48V
	RETŠELISITSOE NKHOANE	10A	5A	3.4A	2.5A
	REKETSO MATLA	120W	120W	122.4W	120W
	LIEKETSENG DIMM	0 ~ 100%
	MAIKETLO A PWM (Mofuta.)	1.47kHz bakeng sa Blank/DA-Type, 2.5kHz bakeng sa DA2-Type
	SETUP, TSOSA NAKO Hlokomela. 2Hlokomela. 9	500ms, 80ms/230VAC kapa 115VAC
	NAKO EA HO PHETHA (Mofuta.)	16ms / 230VAC kapa 115VAC
KEKETSO	TLHOKOMELOTAGE RETS'ELA Hlokomela.3	90 ~ 305VAC 127 ~ 431VDC(Ka kopo sheba karolo ea "STATIC CHARACTERISTIC")
	KEKETSO RANGE	47 ~ 63Hz
	SEBETSO SA MATLA (Typ.)	PF>0.97/115VAC, PF>0.96/230VAC, PF>0.93/277VAC @ full load(Ka kopo, sheba karolo ea “POWER FACTOR (PF) CHARACTERISTIC”)
	TSOHLE HARMONIC PHETOLO	THD< 20%(@load≧60%/115VAC, 230VAC; @load≧75%/277VAC)(Ka kopo, sheba karolo ea “TOTAL HARMONIC DISTORTION”)
	KATLEHO (Mofuta.)	88.5%	90%	90%	90.5%
	AC CURRENT (Mofuta.)	1.3A / 115VAC 0.65A / 230VAC 0.55A / 277VAC
	INRUSH CURRENT (Mofuta.)	COLD QALA 60A(twidth=520μs e lekantsoeng ho 50% Ipeak) ho 230VAC; Ho latela NEMA 410
	MAX. NO. ea li-PSU ho 16A CIRCUIT BREAKER	Li-unit tse 4 (sekhechana sa potoloho ea mofuta oa B) / likarolo tse 6 (sekheo sa potoloho sa mofuta oa C) ho 230VAC
	LEAKAGE NKHOANE	<0.25mA / 277VAC
	HA HO MORORO/STANDBY TIRISO EA MATLA	Ha ho tšebeliso ea matla ea mojaro <0.5w bakeng sa mofuta o se nang letho; tšebeliso ea matla e emeng <0.5W bakeng sa mofuta oa DA/DA2-mofuta
TS'IRELETSO	KHAHLISA	108 ~ 130% e lekantsoe matla a tlhahiso
		Hiccup mode, e hlaphoheloa ka bo eona ka mor'a hore boemo ba phoso bo tlosoe
	POTOLOHO E KHUTSOANE	12V/24V hiccup mode le 36V/48V shut down mode(ho kenyeletsoa mofuta oa DA/ntle le mofuta oa DA2) Hiccup mode, e hlaphoheloa ka bo eona ka mor'a hore boemo ba phoso bo tlosoe (feela bakeng sa mofuta oa DA2)
	KHAHLISO SEFOLITAGE	15 ~ 17V	28 ~ 34V	41 ~ 46V	54 ~ 60V
		Koala o/p voltage, matlafatsa hape ho fola
	PHEKO MOCHESO	Koala o/p voltage, matlafatsa hape ho fola
TIKOLOHO	MOSEBETSI TEMPELA.	Tcase=-40 ~ +90℃ (Ka kopo, sheba karolo ea “ OUTPUT LOAD vs TEMPERATURE”)
	MAX. TLHALOSO TEMPE.	Mokotlana = + 90 ℃
	MOSEBETSI MOKOBELO	20 ~ 95% RH e sa lumellaneng
	POLOKO TEMP., MONATE	-40 ~ + 80 ℃, 10 ~ 95% RH
	MOEKETSI. TIISETSO MOKHOA	± 0.03% / ℃ (0 ~ 45 ℃, ntle le 0 ~ 40 ℃ bakeng sa 12V)
	TSIETSO	10 ~ 500Hz, 5G 12min./1cycle, nako ea 72min. e 'ngoe le e 'ngoe e bapile le lilepe tsa X, Y, Z
TŠIRELETSO & EMC	TS'IRELETSO MAEMO Hlokomela. 5	UL8750( mofuta ”HL” )(ntle le mofuta oa 12DA), CSA C22.2 No. 250.13-12; ENEC BS EN/EN61347-1, BS EN/EN61347-2-13, BS EN/EN62384 e ikemetseng, IP67,BIS IS15885( bakeng sa PWM-120-12,24 feela), EAC TP TC 004,GB19510.1 GB. 19510.14 e amohetswe; Moqapi o bua ka BS EN/EN60335-1; Ho latela BS EN/EN61347-2-13 sehlomathiso J se loketseng ho kenngwa ha tshohanyetso(EL)(AC Input: 100-240Vac)(bakeng sa DA2-Type feela)
	DALI LITEKELO	IEC62386-101, 102, 207,251 bakeng sa DA/DA2-Mofuta feela, Mofuta oa sesebelisoa 6(DT6)
	EMELANG KOLOKOTAGE	I/PO/P:3.75KVAC; I/P-DA:1.5KVAC; O/P-DA:1.5KVAC
	HO IKAOA KHANYETSO	I/PO/P: 100M Ohms / 500VDC / 25℃/ 70% RH
	EMC TS'ISITSO Hlokomela. 6	Ho latela BS EN / EN55015, BS EN / EN61000-3-2 Sehlopha sa C (@ mojaro ≧ 60%); BS EN / EN61000-3-3, GB17743 le GB17625.1, EAC TP TC 020
	TSIETSI EMC	Ho lumellana le BS EN/EN61000-4-2,3,4,5,6,8,11; BS EN/EN61547, boemo ba indasteri e bobebe (surge immunity Line-Line 2KV), EAC TP TC 020
BA BANG	MTBF	2243.7K lihora tsa mots. Telcordia SR-332 (Bellcore); 228.7K lihora tsa mets. MIL-HDBK-217F (25℃)
	TŠEBELETSO	1916337.5mm (LWH)
	PAKA	0.97Kg; 15pcs / 15.6Kg / 0.87CUFT
HLOKOMELA	Litekanyetso tsohle HA li boleloe ka ho khetheha li lekantsoe ho 230VAC, e lekantsoe hajoale le 25℃ ea mocheso o tikolohong. Ho ka 'na ha hlokahala hore ho fokotsoe tekanyo tlas'a phallo e tlaasetages. Ka kopo, sheba likarolo tsa STATIC CHARACTERISTIC bakeng sa lintlha tse ling. Bolelele ba nako ea ho seta bo lekantsoe qalong e batang. Ho bulela/KOMELA mokhanni ho ka baka keketseho ea nako ea ho seta. Mokhanni o nkoa e le karolo e tla sebetsoa hammoho le thepa ea ho qetela. Kaha ts'ebetso ea EMC e tla angoa ke ho kengoa ka botlalo, baetsi ba lisebelisoa tsa ho qetela ba tlameha ho fumana lengolo la EMC Directive mabapi le ts'ebetso e felletseng hape. Letoto lena le kopana le tebello ea bophelo ea lihora tse> 50,000 ha Tcase, haholo-holo tc point (kapa TMP, ka DLC), e ka ba 75 ℃ kapa ka tlase. Ka kopo sheba setatemente sa tiisetso ho MEAN WELL's website at http://www.meanwell.com Thempereichara e fokotsehileng ea 3.5℃/1000m e nang le mefuta e se nang fan le ea 5℃/1000m e nang le mefuta ea fan bakeng sa bophahamo ba ts'ebetso e fetang 2000m(6500ft). Bakeng sa tlhokomeliso efe kapa efe ea kopo le tlhokomeliso ea ts'ebetso ea ts'ebetso ea metsi ea IP, ka kopo sheba bukana ea rona ea mosebelisi pele u e sebelisa. https://www.meanwell.com/Upload/PDF/LED_EN.pdf9. E ipapisitse le matla a IEC 62386-101 / 102 DALI mabapi le melao ea nako le tšitiso, nako e behiloeng e hloka ho lekoa ka molaoli oa DALI ea ka tšehetsang matla a DALI mosebetsing, ho seng joalo nako ea ho seta e tla ba e phahameng ho feta 0.5 motsotsoana Mofuta oa DA. ※ Boitlhotlhollo ba Boikarabelo ba Sehlahisoa: Bakeng sa tlhaiso-leseling e batsi, ka kopo sheba ho https://www.meanwell.com/serviceDisclaimer.aspx

MOSEBETSI OA DIMMING

DIM+ bakeng sa Blank-Type DA+ bakeng sa DA/DA2-mofuta * *DIM- for Blank-Type DA- bakeng sa mofuta oa DA/DA2

Molao-motheo oa ho fifala bakeng sa tlhahiso ea setaele sa PWM

Ho fifala ho fihlelleha ka ho fapanya potoloho ea mosebetsi oa sehlahisoa sa hajoale.

3 ho 1 ts'ebetso ea dimming (bakeng sa Mofuta o se nang letho)

Sebelisa o mong oa mekhoa e meraro lipakeng tsa DIM+ le DIM-: 0 ~ 10VDC, kapa 10V PWM lets'oao kapa khanyetso.

Mohloli o ntseng o fokotseha ho tloha phepelong ea motlakase: 100μA (mofuta.)

Hlokomela

Min. duty cycle of output current e ka ba 0.15%, mme dimming input e ka ba 6KΩ kapa 0.6VDC, kapa 10V PWM signal with 6% duty cycle.
Mosebetsi oa potoloho ea tlhahiso ea hona joale o ka theohela ho 0% ha tlhahiso ea dimming e le ka tlase ho 6KΩ kapa ka tlase ho 0.6VDC, kapa 10V PWM pontšo e nang le potoloho ea mosebetsi e ka tlaase ho 6%.

DALI Interface (lehlakore la mantlha; bakeng sa DA/DA2-Type)

Kenya lets'oao la DALI lipakeng tsa DA+ le DA-.
Protocol ea DALI e na le lihlopha tse 16 le liaterese tse 64.
Mohato oa pele o tsitsitse ho 0.2% ea tlhahiso

OUTPUT LOAD vs TEMPERATURE

TŠOANELO STATIC

MATLA (PF) TŠEBELETSO

Ho fokotseha hoa hlokahala tlas'a phallo e tlaase ea voltage.

PUSELETSO EA TSOHLE EA HARMONIC (THD)

KATLEHO vs MOJARO

Letoto la PWM-120 le na le ts'ebetso e phahameng ea ts'ebetso hoo ho ka fihleloang ho fihla ho 90.5% lits'ebetsong tsa masimong.

Mohlala oa 48V, Tcase ho 80 ℃

BOPHELONG

Setšoantšo se Thibeloang

Tlhaloso ea Mechini

Mofuta-Mofuta

DA/DA2-Mofuta

Khothaletsa Tataiso ea ho Nyoloha

Bukana ea ho kenya

Khokahano bakeng sa mofuta oa Blank

Litemoso

Pele o qala mosebetsi ofe kapa ofe oa ho kenya kapa oa ho lokisa, ka kopo, khaola motlakase ho sesebelisoa. Netefatsa hore e ke ke ea kopanngoa hape ka phoso!

Boloka moea o nepahetseng ho potoloha yuniti 'me u se ke ua beha ntho leha e le efe holim'a eona. Hape sebaka sa 10-15 cm se tlameha ho bolokoa ha sesebelisoa se haufi e le mohloli oa mocheso.
Maemo a ho fanyeha ntle le a tloaelehileng kapa a sebetsa tlas'a mocheso o phahameng oa tikoloho a ka eketsa mocheso oa karolo ea ka hare 'me ho tla hloka hore ho fokotsoe tekanyo ea tlhahiso ea hona joale.
Lintlha tsa hajoale tsa thapo e amohetsoeng ea mantlha / ea bobeli e lokela ho ba kholo ho feta kapa e lekane le ea yuniti. Ka kopo sheba litlhaloso tsa eona.

Bakeng sa bakhanni ba LED ba nang le likhokahano tse sa keneleng metsi, netefatsa hore khokahano lipakeng tsa yuniti le sesebelisoa sa mabone e tiile e le hore metsi a se ke a kenella tsamaisong.
Bakeng sa bakhanni ba LED ba timang, etsa bonnete ba hore selaoli sa hau sa dimming se khona ho khanna likarolo tsena.PWM series e hloka 0.15mA unit ka 'ngoe.
Tc max. e khetholloa holim'a leibole ea sehlahisoa. Ka kopo etsa bonnete ba hore mocheso oa ntlha ea Tc o ke ke oa feta moeli.

U SE KE UA hokela "DIM- ho -V".
E loketse ts'ebeliso ea kahare kapa ts'ebeliso ea kantle ntle le khanya ea letsatsi e tobileng. Ka kopo qoba ho qoelisoa metsing ka metsotso e 30.
Phepelo ea motlakase e nkuoa e le karolo e tla sebetsoa hammoho le lisebelisoa tsa ho qetela. Kaha ts'ebetso ea EMC e tla angoa ke ho kengoa ka botlalo, baetsi ba lisebelisoa tsa ho qetela ba tlameha ho tšoaneleha ho fumana EMC hape

Taelo mabapi le ho kenya ka botlalo hape.

Litokomane / Lisebelisoa

HO BOLELA HONA PWM-120 Series 120W Constant Voltage PWM Output LED Driver [pdf] Bukana ea Mosebelisi
PWM-120-12, PWM-120-24, PWM-120-36, PWM-120 Series, 120W Constant Voltage PWM Output LED Driver, PWM-120 Series 120W Constant Voltage PWM Output LED Driver, Constant Voltage PWM Output LED Driver, Moqtage PWM Output LED Driver, PWM Output LED Driver, Output LED Driver, LED Driver, Driver

Litšupiso

Bukana ea Mosebelisi