Matron WSV100 MConnect Web Seva
Litlhaloso tsa Sehlahisoa
- Tlhokahalo ea Matla: 9-30 V DC at 1.5 A
- Ts'ebetsong ea Marangrang: NMEA2000
- Khokahano ea Ethernet: LAN
- Ts'ebetsong ea Software: Windows, PC, Mac, Tablet
Litaelo tsa Tšebeliso ea Sehlahisoa
Kopanya Matla
Plug in the Power Cord with the correct wire colors based on the version. The red LED will indicate power connection and change to green/yellow when the program starts.
Connect to NMEA 2000 Network
Connect to the NMEA 2000 network, ensuring unique instance numbers across connected networks. Green LEDs will flash when data is received.
Hokela Ethernet Cable
Connect MConnect directly to a Router or MFD with a DHCP Server using an Ethernet cable. The LAN LED will indicate a successful connection.
Access the MConnect URL
Type the provided URL or IP address into a web browser on a PC, Mac, or tablet to access MConnect interface.
Litaelo le Litlhophiso
Access settings and commands by pressing the Settings Menu button or the cog symbol on the screen.
Ho Kopitsa Setlhophiso sa Kamehla
Create a backup of the default configuration by exporting it to your computer. Edit the copy as needed and import it back into MConnect.
Ho hlophisa Configuration
Edit configurations using the MConnect editor accessible from the configuration dialog.
Ho ntlafatsa Software
Upgrade the software on Windows by following the provided instructions.
Kopanya Matla
- The Power Cord is included in the box. MConnect requires 9-30 V DC at 1.5 A. There are two versions of the Power Cord with the following wire colors:
Kgale E ncha Pin 4: +ve Ntsho Khubedu Pin 1: -ve Brown Ntsho Pin 3: Ha e sebelisoe Boputsoa Bosoeu - A red LED on the top of the box will show when power is connected and will change to green/yellow when the program starts (this may take up 2 minutes).
Connect to the NMEA 2000 network.
Two networks may be connected. They will not be bridged by MConnect, but will be treated as a single logical network, i. e. Instance numbers must be unique across both networks. The unit will work using demo data without an NMEA 2000 connection; all the demo data uses instances 100 through 104. Green LEDs on the top of the box will flash when NMEA 2000 data is being received.
Hokela Ethernet Cable
MConnect ha e na seva ea DHCP, kahoo e lokela ho hokeloa ka kotloloho ho Router kapa MFD ka Seva ea DHCP. "LAN" LED e tla benya ha Ethernet e hokahane.
MConnect URL
- MConnect e tšehetsa mDNS. Ho thaepa URL to connect. Local in a web browser on a PC / Mac/tablet should resolve to the IP Address of the box.
- If this does not work, insert a USB Drive into the port on the side of the box for 30 seconds. The “USB” LED on the top of the box should flash while the USB drive is inserted.
Hlokomela: Haeba "USB" LED e sa bonese, ho na le monyetla oa hore USB e hule ho feta hona joale ho feta kamoo chipset ea USB e ka sebetsanang le eona. Haeba sena se etsahala, chipset ea USB e tla koala, 'me lebokose le tla hloka ho fuoa matla hape ho le qala hape. Haeba sena se etsahala, leka USB Drive e fapaneng kapa sebelisa hub ea USB e tsamaisoang ka matla. - Sena se tla theha a file mconnect-data.json motso oa drive o nang le litaba tse latelang:
- Ho sebelisa a web sebatli ho PC / Mac/tablet, thaepa faele URL (kapa Aterese ea IP), 'me u lokela ho bona skrine e latelang:
Litaelo le Litlhophiso
- Pressing the Settings Menu button will show the following options for dialogs. On screens that don’t have a Settings Menu button, a cog symbol will be displayed (normally at the top right of the screen). Pressing the button will show the Dialog Menu:
- Press the Export Button, select the default configuration, press Create Export File, le konopo ea Download ho romela kopi ea bekapo khomphuteng ea hau. Kwala The Export Dialog, ebe o tobetsa Import, mme o kenye kopi ya bekapo sebakeng sa mosebedisi sa MConnect.
Ho hlophisa Configuration
- Ho tsoa moqoqong oa litlhophiso, ho tobetsa konopo ea Edit Configurations ho tla hlahisa mohlophisi oa MConnect.
- To see the list of Parameters that can be monitored and components displayed on the screen, press the Documentation button at the top of the screen, andd then the Create MConnect Parameter File button. This will create an HTML file and place it in your Downloads directory, where you can open it using a browser.
- All user images that you need as backgrounds, or within gauges and buttons, need to be uploaded from your PC to MConnect using the Image Manager before they can be selected in the Screens editor.
- To create a new configuration, open the configuration panel at the top left and press the New button.
- For more details, see the full MConnect Manual, which can be downloaded from the Maretron Websebaka https://www.maretron.com/products/mconnect/
Ho ntlafatsa Software
Windows
Mofuta o mocha oa software o tla fanoa e le .exe file. Hokela USB Drive ho Windows PC kapa laptop ebe o kenya .exe file. Sena se tla tlatsa drive ea USB ka faele ea files hlokahala ho kenya apdeite.
Mac / Linux
Mofuta o mocha oa software o tla fanoa e le .zip file. Unzip the contents of the file to the root of a USB Drive. This will populate the USB drive with the files needed to install the update. Eject the USB Drive.
Ho kenya
- Hlahisa MConnect web leqepheng la sesebelisoa sefe kapa sefe.
- Kenya USB Drive koung ea USB ka lehlakoreng la lebokose la MConnect. "USB" LED e ka holimo ho lebokose e lokela ho bonesa ha USB drive e kenngoa. Latela litaelo tse ho MConnect web leqephe.
Hlokomela: Haeba "USB" LED e sa bonese, ho na le monyetla oa hore USB e hule ho feta hona joale ho feta kamoo chipset ea USB e ka sebetsanang le eona. Haeba sena se etsahala, chipset ea USB e tla koala, 'me lebokose le tla hloka ho fuoa matla hape ho le qala hape. Haeba sena se etsahala, leka USB Drive e fapaneng kapa sebelisa hub ea USB e tsamaisoang ka matla. - Tsohle tse files li saennwe ka dijithale; haeba e teng file e fetotsoe, ts'ebetso ea ntlafatso e tla emisoa.
- If the upgrade is configured to install automatically, the LEDs on the top of the box will flash one at a time in an oscillating up and down pattern, otherwise the user will be prompted to start the upgrade from a screen.
Lipotso tse atisang ho botsoa (FAQ)
- A na nka sebelisa MConnect ntle le ho hokela marang-rang a NMEA 2000?
Yes, MConnect can be used with demo data without an NMEA 2000 connection. - How do I know if power is connected to MConnect?
The red LED on top of the box indicates power connection and changes to green/yellow when the program starts. - What should I do if I encounter issues with the Ethernet connection?
Ensure that MConnect is connected directly to a Router or MFD with a DHCP Server using an Ethernet cable and check for a flashing LAN LED to confirm the connection.
Litokomane / Lisebelisoa
 |
Matron WSV100 MConnect Web Seva [pdf] Tlhophiso Tataiso WSV100, WSV100 MConnect Web Server, MConnect Web Seva, Web Sebapali, seva |