Tataiso ea Ts'ebetso ea M5StickC Plus2
Firmware ea Fektheri
Ha sesebelisoa se kopana le mathata a ts'ebetso, u ka leka ho khantša firmware ea fektheri ho hlahloba hore na ho na le ho se sebetse ha hardware. Sheba thuto e latelang. Sebelisa M5Burner firmware flashing tool ho khantša firmware ea fektheri ho sesebelisoa.
LBH
Q1: Hobaneng ha skrine ea ka ea M5StickC Plus2 e ntšo / e sa qale?
Litharollo: Firmware ea semmuso ea fektheri ea M5Burner "M5StickCPlus2 User Demo"
Q2: Hobaneng e sebetsa lihora tse 3 feela? Hobaneng ha 100% e tjhaja ka motsotso o le mong, tlosa thapo ea ho tjhaja e tla tima?
Litharollo: “Bruce bakeng sa Stack plus2”Ena ke firmware e seng molaong. Ho benya ha firmware e seng molaong ho ka hlakola waranti ea hau, ha baka ho se tsitse, 'me ha beha sesebelisoa sa hau likotsing tsa ts'ireletso.
Ka kopo, chesa firmware ea semmuso.
Tokisetso
- Sheba thuto ea M5Burner ho tlatsa sesebelisoa sa firmware flashing, ebe u sheba setšoantšo se ka tlase ho khoasolla firmware e lumellanang.
Khoasolla sehokelo: https://docs.m5stack.com/en/uiflow/m5burner/intro
Ho kenya Mokhanni oa USB
Keletso ea ho Kenya Mokhanni
Tobetsa sehokelo se ka tlase ho khoasolla mokhanni o ts'oanang le sistimi ea hau ea ts'ebetso. Sephutheloana sa mokhanni bakeng sa CP34X (bakeng sa mofuta oa CH9102) se ka khoasolloa le ho kenngoa ka ho khetha sephutheloana sa ho kenya se tsamaellanang le sistimi ea hau ea ts'ebetso. Haeba u kopana le mathata ka ho jarolla lenaneo (joalo ka ho qeta nako kapa "E hlolehile ho ngolla liphoso tsa RAM"), leka ho kenya mokhanni oa sesebelisoa hape.
CH9102_VCP_SER_Windows
https://m5stack.oss-cn-shenzhen.aliyuncs.com/resource/drivers/CH9102_VCP_SER_Windows.exe
CH9102_VCP_SER_MacOS v1.7
https://m5stack.oss-cn-shenzhen.aliyuncs.com/resource/drivers/CH9102_VCP_MacOS_v1.7.zip
Khetho ea Port ho MacOS
Ho MacOS, ho ka ba le likou tse peli tse fumanehang. Ha u li sebelisa, ka kopo khetha boema-kepe bo bitsoang wchmodem.
Khetho ea Port
Hokela sesebelisoa khomphuteng ka thapo ya USB. Kamora hore ts'ebetso ea mokhanni e phethe, o ka khetha boema-kepe ba sesebelisoa bo lumellanang le M5Burner.
Chesa
Tobetsa "Chesa" ho qala ts'ebetso ea ho benya.
StickC-Plus2
SKU:K016-P2
Tlhaloso
StickC-Plus2 ke mofuta o pheta-phetoang oa Stick C-Plus. E tsamaisoa ke chip ea ESP32-PICO-V3-02, e fana ka khokahanyo ea Wi-Fi. Ka har'a 'mele oa eona o kopanetsoeng, e kopanya lisebelisoa tse ngata tse fapaneng tsa lisebelisoa, ho kenyelletsa IR emitter, RTC, microphone, LED, IMU, li-buttons, buzzer le tse ling. E na le ponts'o ea 1.14-inch TFT e tsamaisoang ke ST7789V2 e nang le qeto ea 135 x 240.
Bokhoni ba betri bo ekelitsoe ho 200 mAh, 'me sebopeho se lumellana le li-module tsa HAT le Unit series.
Sesebediswa sena sa ntshetsopele se boreledi le se kopane se ka hotetsa boiqapelo bo se nang moeli. StickC-Plus2 e o thusa ho haha li-prototype tsa sehlahisoa sa IoT kapele mme e nolofatsa ts'ebetso eohle ea nts'etsopele. Esita le ba qalang ba qalang ho etsa mananeo ba ka etsa likopo tse thahasellisang 'me ba li sebelise bophelong ba sebele.
Thuto
UIFlow
Thupelo ena e tla hlahisa mokhoa oa ho laola sesebelisoa sa StickC-Plus2 ka sethala sa "graphical programming" sa UIFlow.
UiFlow2
Thupelo ena e tla hlahisa mokhoa oa ho laola sesebelisoa sa StickC-Plus2 ka sethala sa graphical sa UiFlow2.
Arduino IDE
Thupelo ena e tla hlahisa mokhoa oa ho hlophisa le ho laola sesebelisoa sa StickC-Plus2 u sebelisa Arduino IDE.
Hlokomela
Boema-kepe ha bo Tsejoe
Ha o sebelisa thapo ea C-to-C, haeba boema-kepe bo sa tsejoe, ka kopo etsa ts'ebetso e latelang ea ho sebelisa matla:
hakolla StickC-Plus2, e tima (tobetsa konopo ea matla nako e telele ho fihlela LED e tala e bonesoa), ebe o hokela thapo ea USB hape hore o bone.
Likaroloana
- E ipapisitse le ESP32-PICO-V3-02 ka tšehetso ea Wi-Fi
- E hahelletsoeng ka har'a 3-axis accelerometer le 3-axis gyroscope
- Moemeli oa IR o kopantsoeng
- RTC e hahiloeng
- Microphone e kopantsoeng
- Likonopo tsa basebelisi, LCD ea 1.14-inch, konopo ea matla / reset
- 200 mAh Li-ion betri
- Sehokelo sa katoloso
- Molaetsa o kopaneng oa passive buzzer
- E ka aparoa 'me e ka beoa
- Sethala sa Nts'etsopele
- UiFlow1
- UiFlow2
- Arduino IDE
- ESP-IDF
- PlatformIO
E kenyeletsa
- 1 x StickC-Plus2
Lisebelisoa
- Lisebelisoa tse ka aparoang
- Molaoli oa IoT
- Thuto ea STEM
- merero ea DIY
- Lisebelisoa tsa Smart-Home
Litlhaloso
| Tlhaloso | Paramethara |
| SoC | ESP32-PICO-V3-02 240 MHz dual-core, Wi-Fi, 2 MB PSRAM, 8 MB Flash |
| Keletso Voltage | 5 V @ 500 mA |
| Sehokedi | Mofuta oa C x 1, GROVE (I2C + I/O + UART) x 1 |
| LCD skrine | 1.14 inch, 135 x 240 Mmala TFT LCD, ST7789V2 |
| Microphone | SPM1423 |
| Likonopo | Likonopo tsa basebelisi x 3 |
| LED | LED e tala x 1 (e sa hlophiseheng, sesupo sa boroko) LED e khubelu x 1 (phini ea taolo ea likarolo G19 e nang le emitter ea IR) |
| RTC | BM8563 |
| Buzzer | Molumo o ka har'a sekepe |
| IMU | MPU6886 |
| Antenna | 2.4 G 3D antenna |
| Lipini tsa Kantle | G0, G25/G26, G36, G32, G33 |
| Betri | 200 mAh @ 3.7 V, ka hare |
| Mocheso oa Ts'ebetso | 0 ~ 40 °C |
| Sebaka se koaletsoeng | Plastiki (PC) |
| Boholo ba Sehlahisoa | 48.0 x 24.0 x 13.5mm |
| Boima ba Sehlahisoa | 16.7 g |
| Boholo ba Sephutheloana | 104.4 x 65.0 x 18.0mm |
| Boima bo felletseng | 26.3 g |
Litaelo tsa Ts'ebetso
Motlakase/O tima
Ho bulela: Tobetsa "BUTTON C" ho feta metsotsoana e 2, kapa u tsohe ka lets'oao la RTC IRQ. Ka mor'a hore lets'oao la ho tsoha le hlahisoe, lenaneo le tlameha ho beha phini ea HOLD (G4) ho ea holimo (1) ho boloka matla a le teng, ho seng joalo sesebelisoa se tla koala hape.
Ho tima: Ntle le matla a kantle a USB, tobetsa "BUTTON C" ho feta metsotsoana e 6, kapa seta HOLD (GPIO4)=0 lenaneong ho tima. Ha USB e ntse e hokahane, ho tobetsa "BUTTON C" bakeng sa metsotsoana e fetang 6 ho tla tima skrini ebe o kenya mokhoa oa ho robala (eseng ho tima ka botlalo).
Maqheka
Pina 'mapa
LED e khubelu & IR Emitter | Konopo A | Konopo B | Buzzer
| ESP32-PICO-V3-02 | GPIO19 | GPIO37 | GPIO39 | GPIO35 | GPIO2 |
| IR Emitter & Red LED | IR emitter & Red phini ea LED | ||||
| Konopo A | Konopo A | ||||
| Konopo B | Konopo B | ||||
| Konopo C | Konopo C | ||||
| Passive Buzzer | Buzzer |
Pontšo ea mebala ea TFT
IC ea mokhanni: ST7789V2
Qeto: 135 x 240
| ESP32-PICO-V3-02 | G15 | G13 | G14 | G12 | G5 | G27 |
| TFT Pontšo | TFT_MOSI | TFT_CLK | TFT_DC | TFT_RST | TFT_CS | TFT_BL |
Microphone MIC (SPM1423)
| ESP32-PICO-V3-02 | G0 | G34 |
| MIC SPM1423 | CLK | DATA |
6-Axis IMU (MPU6886) & RTC BM8563
| ESP32-PICO-V3-02 | G22 | G21 | G19 |
| IMU MPU6886 | SCL | SDA | |
| BM8563 | SCL | SDA | |
| Emitter ea IR | TX | ||
| LED e khubelu | TX |
HY2.0-4P
| HY2.0-4P | Ntsho | Khubedu | Bosehla | Bosoeu |
| KOU.TUMELO | GND | 5V | G32 | G33 |
Boholo ba Mohlala
Li-datasheets
ESP32-PICO-V3-02
ST7789V2
BM8563
MPU6886
SPM1423
Lisebelisoa
Arduino
StickC-Plus2 Arduino Qalo e Potlakileng
Laebrari ea StickC-Plus2
Firmware ea Teko ea Feme ea StickC-Plus2
UiFlow1
StickC-Plus2 UiFlow1 Qalo e Potlakileng
UiFlow2
StickC-Plus2 UiFlow2 Qalo e Potlakileng
PlatformIO
[env:m5stack-stickc-plus2] sethala = espressif32@6.7.0
boto = m5stick-c
moralo = arduino
upload_speed = 1500000
monitor_speed = 115200
build_flags =
-DBOARD_HAS_PSRAM
-mfix-esp32-psram-cache-taba
-DCORE_DEBUG_LEVEL=5
lib_deps =
M5Unified=https://github.com/m5stack/M5Unified
Mokhanni oa USB
Tobetsa lihokelo tse ka tlase ho khoasolla mokhanni o ts'oanang le sistimi ea hau ea ts'ebetso. Sephutheloana se na le bakhanni ba CP34X (bakeng sa CH9102). Ka mor'a ho ntša li-archive, tsamaisa mochine o lumellanang le botebo ba OS ea hau.
Haeba u kopana le mathata a kang nako ea ho qeta nako kapa "O hlolehile ho ngolla RAM" nakong ea ho khoasolla, ka kopo leka ho kenya mokhanni hape.
| Lebitso la Mokhanni | Chip e tšehelitsoeng | Khoasolla |
| CH9102_VCP_SER_Windows | CH9102 | Khoasolla |
| CH9102_VCP_SER_MacOS v1.7 | CH9102 | Khoasolla |
Khetho ea Port ea macOS
Likou tse peli tsa serial li ka hlaha ho macOS. Ka kopo, khetha boema-kepe bo bitsoang wchmodem.
Easy loader
Easy Loader ke flasher e bobebe ea lenaneo e tlang le firmware ea lipontšo. Ka ho latela mehato e seng mekae e bonolo, u ka e khantša ho molaoli bakeng sa ho netefatsa ts'ebetso e potlakileng.
| Easy loader | Khoasolla | Hlokomela |
| Teko ea Feme bakeng sa Windows | download | / |
Tse ding
Tataiso ea Firmware ea Firmware ea StickC-Plus2
Video
StickC-Plus2 Kenyelletso ea Sebopeho
StackC Plus2 视频.mp4
Phetoho ea Phetoho
| Letsatsi la ho nšoa | Fetola Tlhaloso | Hlokomela |
| / | Tokollo ea pele | / |
| 2021-12 | Ts'ebetso e kenyellelitsoeng ea ho robala le ho tsoha, mofuta o ntlafalitsoeng ho v1.1 | / |
| 2023-12 | E tlositsoe PMIC AXP192, MCU e fetohile ho tloha ho ESP32-PICO-D4 ho ea ho ESP32-PICO-V3-02, mokhoa o fapaneng oa ho tima / ho tima, mofuta oa v2 | / |
Papiso ea Sehlahisoa
Liphapang tsa Hardware
| Sehlahisoa Lebitso |
SoC | Tsamaiso ea Matla | Bokhoni ba Battery | Mohopolo | USB-UART Chip | Mmala |
| Stick C-Plus | ESP32-PICO-D4 | AXP192 | 120 mAh | 520 KB SRAM + 4 MB Flash | CH522 | E khubelu - lamunu |
| StickC-Plus2 | ESP32-PICO-V3-02 | / | 200 mAh | 2 MB PSRAM + 8 MB Flash | CH9102 | namunu |
Phapang ea Pin
| Lebitso la Sehlahiswa | IR | LED | TFT | KOPANO A | KONYANA B | KOPANO C (TSOHA) |
TS'EPA | Betri Moqtage Lemoha |
| M5STICKC PLUS | G9 | G10 | MOSI (G15) CLK (G13) DC (G23) RST (G18) CS (G5) |
G37 | G39 | Ka mehla konopo |
/ | Ka AXP192 |
| M5STICKC PLUS2 | G19 | G19 | MOSI (G15) CLK (G13) DC (G14) RST (G12) CS (G5) |
G37 | G39 | G35 | G4 | G38 |
Phapang ea ho tima / ho tima
| Sehlahisoa Lebitso | Matla On | Matla Off |
| Stick C-Plus2 | Tobetsa "BUTTON C" ho feta 2s, kapa tsoha ka RTC IRQ. Kamora ho tsoha, seta HOLD (G4)=1 lenaneong ho boloka matla, ho seng joalo sesebelisoa se tla koala hape. |
Ntle le matla a USB, tobetsa "BUTTON C" ho feta 6 s, kapa seta HOLD (GPIO4)=0 lenaneong ho tima. Ha USB e hoketsoe, ho tobetsa "BUTTON C" bakeng sa metsotso e fetang 6 ho tla tima skrini ebe o kena borokong, empa eseng ho tima ka botlalo. |
Hobane StickC-Plus2 e tlosa PMIC AXP192, mokhoa oa ho tima/ho tima o fapane le liphetolelo tse fetileng. Joalokaha ho boletsoe qalong ea tokomane ena, ts'ebetso e tšoana haholo, empa lilaebrari tse tšehetsoeng li tla fapana. Matla a lets'oao la Wi-Fi le IR ka bobeli a ntlafalitsoe ha a bapisoa le mofuta o fetileng.
Litokomane / Lisebelisoa
 |
M5STACK ESP32-PICO-V3-02 IoT Development Module [pdf] Bukana ea Mosebelisi ESP32-PICO-V3-02 IoT Development Module, ESP32-PICO-V3-02, IoT Development Module, Development Module, Module |