Philips Hue Centris Ceiling Light Disassembly Guide
Document ID: 04 2021-08-04
Warnings
Always make sure the luminaire is detached from the mains socket.
Always make sure the DC cable is detached from the power supply.
Staring at the operating light source may cause eye injury.
Product Overview
This document provides detailed disassembly instructions for the Philips Hue Centris ceiling light. The accompanying diagram serves as an exploded view, illustrating the arrangement and identification of various components within the fixture.
Component List
| Component # | Component Name | Quantity |
|---|---|---|
| 1 | COVER | 2 |
| 2 | SCREW | 2 |
| 3 | BRACKET | 1 |
| 4 | SCREW | 2 |
| 5 | CONTROL GEAR - PSU | 1 |
| 6 | DIFFUSER | 1 |
| 7 | REFLECTOR | 1 |
| 8 | COVER | 1 |
| 9 | LIGHT SOURCE - LED STRIP | 2 |
| 10 | END CAP | 1 |
| 11 | CONTROL GEAR - HUE CONNECT | 1 |
| 12 | SCREW | 4 |
| 13 | CONNECTION CABLE | 1 |
| 14 | TERMINAL BLOCK | 1 |
| 15 | SCREW | 1 |
| 16 | NUT | 1 |
| 17 | WIRE | 1 |
| 18 | END CAP | 1 |
| 19 | TUBE | 3 |
| 20 | GU 10 BULB | 3 |
| 21 | COVER | 3 |
Disassembly Instructions
| Step | Instruction | Tools Needed |
|---|---|---|
| a | REMOVE COVER (1) GENTLY LIFTING THEM OUT | FLATHEAD SCREWDRIVER |
| b | UNSCREW SCREW (2) | CROSSHEAD SCREWDRIVER PZ |
| c | DISCONECT TERMINAL BLOCK (14) SILDING IT OUT AT THE SAME TIME PUSHING SAFETY LEVER ON IT | |
| d | TAKE A SIDE BRACKET (3) UNHOOKING IT FROM END CAP (10) | |
| e | REMOVE BOTH END CAPS (10) (18) BY UNSCREWING SCREWS (12) | TORXHEAD SCREW DRIVER T10 |
| f | SLIDE OUT DIFFUSER (6) | |
| g | PULL OUT REFLECTOR (7) | |
| h | UNPLUG CONNECTION CABLES (13) FROM BOTH LIGHT SOURCE-LED STRIPS (9) | |
| i | REMOVE LIGHT SOURCE-LED STRIPS (9) ACCORDING INSTRUCTION 442295215544_L2 REMOVAL AND TEST INSTRUCTION FLEX LED STRIP | SEE INSTRUCTION |
| j | REMOVE THE COVER (8) BY TILTING IT FORWARD WHILE SQUEEZING IT WITH YOUR FINGER BETWEEN THE CABLE EXITS | |
| k | SLIDE OUT CONTROL GEAR - HUE CONNECT (11) FROM THE COVER (8) | |
| l | UNPLUG CONNECTION CABLE (13) AND POWER WIRES FROM CONTROL GEAR - HUE CONNECT (11) | WAGO TOOL #2065 |
| m | DETACH WIRE (19) BY UNSCREWING SCREW (17) FROM NUT (18) | ALLEN KEY, PINCER |
| n | CUT OUT MAIN WIRES OF CONTROL GEAR PSU (5) | CUTTING PLIERS |
| o | REMOVE CONTROL GEAR PSU (5) BY UNSCREWING BOTH SCREWS (4) | ALLEN KEY |
| p | REMOVE COVERS (21) BY ROTATING THEM AND PULLING OUT FROM TUBES (19) | |
| r | REMOVE GU 10 BULBS (20) ROTATING THEM OUT |
Product Variants
| SKU | Color | Country |
|---|---|---|
| 915005928601 | WHITE | EU/UK |
| 915005928501 | BLACK | EU/UK |
Document Information
Document Name: Centris Hue Cross special form 3x5.7W white/black - Disassembly instruction
Local Part ID: 096939
Status: CONFIDENTIAL, PROPERTY OF: © 2021 Signify Holding
Checked Date: 2021-08-04
