Onn Wireless Gaming Headset User Guide

User Guide: Onn Wireless Gaming Headset

Vendor Stock Nbr: 100162484

Contents & Information

What's in the Box

• 1). Wireless Gaming Headset
• 2). Wireless USB Receiver
• 3). USB C Charging Cable 3 ft
• 4). Quick Start Guide

Features

• Speaker Diameter: 50mm
• Speaker Rated Input Power: 10mw
• Speaker Impedance: 32Ω±15%
• Speaker Sensitivity: 103dB±3dB
• USB C Charging cable: 3 ft
• Play Time at 50% Volume: 24 Hours (RGB Light OFF)
• Wireless USB & Bluetooth Dual Mode Connection
• Three Gaming EQ Pre-set

Scan here for more product information and to leave a review: [QR Code Link]

Overview

Get To Know Your Gaming Headset

Get to Know Panel

• 1) RGB Light: RGB lights automatically turn off after 30 seconds of inactivity and re-enter standby mode. They turn back on with operation.
• 2) Flip-Up to Mute Microphone
• 3) Adjustable Headband
• 4) Soft Cooling Gel Earpads
• 5) Volume Up/Down Wheel
• 6) Power On/Off Button
• 7) Wireless USB & Bluetooth Switch Mode Button
• 8) EQ Preset Switch Button
• 9) LED Indicator
• 10) USB C Charging Port
• 11) Wireless USB Receiver
• 12) USB C Charging Cable 3ft

Functional Instructions

• Charging LED Light Status: Steady Red light.
• During device search: Flash Red and Blue.
• After successful pairing: Steady Blue Light.
• When the dongle is in Pairing: Flash Red and Blue.
• After the dongle successfully pairs: Steady Blue (Microphone Unmuted). Steady Red (Microphone Muted).
• When the headset microphone is muted: Steady Red Light.
• When the headset microphone is active: Steady Blue Light.
• When the headset powers off: Flash Twice Red Light.

Safety Precautions

Lithium-ion Battery

CAUTION

Lithium-ion batteries, if used improperly, can be dangerous to users. Exercise caution when handling them, especially in adverse environments.

WARNING

This symbol on the product or its packaging indicates that this product must not be disposed of with your other household waste. Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment. The separate collection and recycling of your waste equipment at the time of disposal will help conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment. For more information about where you can drop off your waste for recycling, please contact your local authority, or where you purchased your product.

Compliance Statement for Onn Wireless Gaming Headset

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Important: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Let's Get Started!

1. First Time Set-up

Charge your headset

Step 1: Plug the USB Dongle Receiver into PC's USB-A Port. The Dongle LED light will flash Red and Blue when it is plugged in. After successful connection, the dongle LED will turn blue. Hear "USB connected" from the headset.

Step 2: Power ON/OFF. Press & Hold the Power button for 3 seconds, the LED light turns blue. Hear "Power On" from the headset. Make sure your headset is in USB MODE to use the USB-Receiver as the audio source. The headset defaults to USB Mode every time it is powered on.

2. Connect Headset to the PC

If the headset doesn't automatically connect to your computer and play sound, please manually set the audio source.

1. Go to PC Settings, then select System.
2. When the USB Dongle Receiver is plugged into the Device, go to PC Setting > Sound > Volume Mixer.
3. Select both the Output Device and Input Device as "Onn Gaming Headset."
4. Set Output to Headset to ALL Audio.
5. Set Volume Control (Headset) level to maximum.
6. Adjust your microphone levels by going to Settings > Sound > Microphone > Adjust Mic Level > Microphone Level.

3. Connect Headset to the PlayStation

Insert USB Receiver

When the USB Dongle Receiver is plugged into the PlayStation Device, go to PlayStation Settings > Device > Select Audio Devices.

Select both the Output Device and Input Device as "Onn Gaming Headset."

Set Output to Headset to ALL Audio.

Set Volume Control (Headset) level to maximum.

Adjust your microphone levels by going to Settings > Sound > Microphone > Adjust Mic Level > Microphone Level.

4. Bluetooth Set-up

Mobile Device setup for headset

Step 1: Switch to Bluetooth Mode. Press and hold the Mode Button for 3 seconds to enter Bluetooth Mode. The LED will alternatively flash blue and red.

Step 2: Open Bluetooth setting on your device and select "Onn Gaming Headset" to get it connected. After successful connection, you will hear "Bluetooth Connected" from the headset.

The same operation can be applied to connect with Bluetooth-enabled devices such as PC/Mobile/Console.

Operation

1. Microphone Mute

• Microphone Up (Muted Mode): Microphone Status: Muted. RGB Light: RED Color. Dongle LED: Red Color.
• Microphone Down (Active Mode): Microphone Status: Active. RGB Light: Rainbow Color. Dongle LED: Blue Color.
• When answering a call, press the Mode button and flip down the microphone to answer.

2. Select Different EQ Pre-Set

• EQ-1: Standard Mode
  Press the Mode Button once, you will hear the sound prompt "Standard Mode".
• EQ-2: Chat Mode
  Press the Mode Button once, you will hear the sound prompt "Chat Mode".
• EQ-3: Game Mode
  Press the Mode Button once, you will hear the sound prompt "Game Mode".
• Switch to FPS Gaming EQ - Full Frequency Enhancement
• Switch to Default Gaming EQ - Balanced

Warranty

1 YEAR LIMITED WARRANTY

COVERING DEFECTIVE PARTS

Contact Manufacturer for Additional Information.

This warranty is non-transferable and does not cover failures due to misuse of improper installation or maintenance.

• All warranty coverage applies only if barricade is used in the United States.

For product assistance & missing or replacement parts:

WE CAN HELP

1-888-516-2630

7 DAYS/WEEK

7:00am - 9:00pm CST

Find more at Walmart.com

THIS GUIDE CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.