ONN Clock Radio with Wireless Charging

Features

Top View

1. MODE Button (M): Powers on the device, cycles through Bluetooth and FM modes, and powers off the device when held for 3 seconds.

2. ALARM Button (A): Turns the alarm on/off. Press and hold for 3 seconds to enter alarm setting mode.

3. CLOCK Button: Returns to clock mode from other modes. Press and hold for 3 seconds to enter clock setting mode.

4. DIMMER/SNOOZE/SLEEP Button: When alarm rings, press to snooze for 9 minutes. When alarm is not ringing, press to adjust LED brightness (low, medium, high). Press and hold for 2 seconds to set the sleep timer.

5. Volume Down/Previous Track Button (◄◄/-): In Bluetooth mode, switches to the previous track. In FM mode, tunes frequency or switches preset stations. Double-click to auto-scan. Press and hold to decrease volume.

6. PLAY/PAUSE Button (||): In Bluetooth mode, plays or pauses audio. In FM mode, enters preset station play mode. Press and hold for 2 seconds to set a preset station.

7. Volume Up/Next Track Button (►►/+): In Bluetooth mode, switches to the next track. In FM mode, tunes frequency or switches preset stations. Double-click to auto-scan. Press and hold to increase volume.

Rear View

1. AUX IN Jack: Connect an external audio device using a 3.5mm audio cable.

2. FM Antenna: An 80cm pigtail cable for optimal FM signal reception. Keep it fully extended.

3. USB Port: Connect a USB cable to charge an external device.

4. DC IN Jack: Connect the included 9V/3A power adapter.

LED Digital Display

1. Current Time: Displays the current time.

2. AM/PM Indicator: Shows AM or PM.

3. Alarm Indicator: Lights up when the alarm is set and enabled.

4. Bluetooth Indicator: Lights up when Bluetooth mode is selected.

5. AUX Indicator: Lights up when an external audio device is connected.

6. FM Indicator: Lights up when FM mode is selected.

7. MHz Indicator: Lights up when FM mode is selected.

Product Guide

Package Contents

• 1x Clock Radio
• 1x 9V/3A Power Adapter
• 1x User Guide
• 1x Quick Start Guide

Connect to Power

Use only the included 9V/3A Power Adapter. Connect the AC power cord to a wall socket.

Power Off

In any mode, press and hold the MODE button (M) for 3 seconds to turn off the device. Only the clock will be displayed.

Set Clock Time

Press and hold the CLOCK button (3) for 3 seconds. The hour digits will blink. Use the Volume Down/Previous Track (◄◄/-) or Volume Up/Next Track (►►/+) buttons to adjust the hour. Press the CLOCK button (3) again to switch to minutes. The minute digits will blink. Use the Volume Down/Previous Track (◄◄/-) or Volume Up/Next Track (►►/+) buttons to adjust the minutes. Press the PLAY/PAUSE button (6) to confirm. The setting is saved automatically if no button is pressed for 15 seconds.

Set Alarm Time

Press and hold the ALARM button (2) for 3 seconds. The hour digits will blink. Use the Volume Down/Previous Track (◄◄/-) or Volume Up/Next Track (►►/+) buttons to adjust the hour. Press the ALARM button (2) again to switch to minutes. The minute digits will blink. Use the Volume Down/Previous Track (◄◄/-) or Volume Up/Next Track (►►/+) buttons to adjust the minutes. Press the PLAY/PAUSE button (6) to confirm. The setting is saved automatically if no button is pressed for 15 seconds.

Set Alarm Volume

In Alarm setting mode, use the Volume Down/Previous Track (◄◄/-) or Volume Up/Next Track (►►/+) buttons to adjust the alarm volume.

Set Alarm Sound

After setting the alarm minute, press the ALARM button (2) twice to enter alarm tone selection. Use the Volume Down/Previous Track (◄◄/-) or Volume Up/Next Track (►►/+) buttons to choose a tone (1-4 or FM radio). Press the PLAY/PAUSE button (6) to confirm. The setting is saved automatically if no button is pressed for 15 seconds. If FM is selected as the alarm tone, use the Volume Down/Previous Track (◄◄/-) or Volume Up/Next Track (►►/+) buttons to adjust the alarm volume.

Turn On/Off Alarm

Press the ALARM button (2) to turn the alarm on or off. The alarm icon will appear or disappear accordingly. If the alarm is not stopped, it will ring for 1 hour and stop automatically.

Use Snooze Feature

1. When the alarm rings, press the DIMMER/SNOOZE/SLEEP button (4) to snooze for 9 minutes.
2. When the alarm rings with normal tones, press any button except the DIMMER/SNOOZE/SLEEP button (4) to stop the alarm. The alarm setting remains active.
3. When the alarm rings with FM tone, press the Volume Down/Previous Track (◄◄/-) or Volume Up/Next Track (►►/+) buttons to adjust the FM volume. Then, press any button except the DIMMER/SNOOZE/SLEEP button (4) and the volume buttons to stop the alarm. The FM sound stops, but the alarm setting remains active.

Set the Sleep Timer

In Bluetooth, AUX, or FM modes, press and hold the DIMMER/SNOOZE/SLEEP button (4). Cycle through options: 90, 60, 30, 15 minutes, and OFF. Release the button on the desired option to confirm.

Play FM Radio

1. Press the MODE button (M) to switch to FM mode (supports 87.5MHz to 108MHz).
2. Press the Volume Down/Previous Track (◄◄/-) or Volume Up/Next Track (►►/+) buttons to tune the frequency by 0.1MHz increments. Double-click these buttons to auto-scan for a station. Auto-scan stops when a station is found or can be interrupted by pressing the buttons again.
3. To program a station, tune to the desired frequency, then press and hold the PLAY/PAUSE button (6) for 2 seconds to enter preset mode. The next available preset number (P-01 to P-10) appears. Press the Volume Down/Previous Track (◄◄/-) or Volume Up/Next Track (►►/+) buttons to select a different preset number. Press the PLAY/PAUSE button (6) again to save the station and exit preset mode. The setting is saved automatically if no button is pressed for 15 seconds.
4. To play a preset station, press the PLAY/PAUSE button (6). The last played preset station number appears. Press the Volume Down/Previous Track (◄◄/-) or Volume Up/Next Track (►►/+) buttons repeatedly to select the desired preset station. Press the PLAY/PAUSE button (6) again to exit play preset station mode.
5. Press and hold the Volume Down/Previous Track (◄◄/-) or Volume Up/Next Track (►►/+) buttons to adjust the volume.

Adjust LED Brightness

When the alarm is not ringing, short press the DIMMER/SNOOZE/SLEEP button (4) to cycle through LED brightness levels: low, medium, and high. In power-off status, the LED display defaults to the lowest brightness.

Play Audio from a Bluetooth Device

To connect a Bluetooth device for the first time, you need to pair it with the clock radio. The operational range is approximately 10 meters (33 feet) without obstructions. Compatibility with all Bluetooth devices is not guaranteed.

1. Press the MODE button (M) to switch to Bluetooth mode. A "Bluetooth Mode" prompt will be heard. The clock radio automatically enters pairing mode with the Bluetooth name "ONN 2.0 QI Clock Radio". A "Bluetooth Pairing" prompt indicates successful pairing, and "Bluetooth Disconnected" indicates disconnection.
2. Press and hold the ALARM button (2) for 3 seconds to disconnect the current device and re-enter pairing status.
3. When Bluetooth is disconnected, press the PLAY/PAUSE button (6) to reconnect to the last connected device.
4. Press and hold the Volume Down/Previous Track (◄◄/-) or Volume Up/Next Track (►►/+) buttons to adjust the volume.

Connect an External Audio Device

1. In any mode, connect an audio cable (not included) with a 3.5mm connector to the AUX IN jack on the rear of the clock radio and to the audio output jack of your audio device. The clock radio will automatically enter AUX mode and play audio from your device. The AUX indicator will remain on.
2. Press and hold the Volume Down/Previous Track (◄◄/-) or Volume Up/Next Track (►►/+) buttons to adjust the volume.

Return Factory Default

Press and hold the Volume Down/Previous Track (◄◄/-) and Volume Up/Next Track (►►/+) buttons together for 10 seconds until a "beep" is heard. This will reset the clock, alarm, and Bluetooth pairing settings to their factory defaults.

Wireless Charging a Mobile Device

1. Ensure the clock radio is powered on by connecting the included 9V/3A power adapter.
2. Verify that your mobile device supports Qi wireless charging technology.
3. Place your mobile device horizontally on the wireless charging stand. Vertical placement may prevent charging.
4. Your device will indicate when charging is successful.

Charge a Mobile Device via USB-A Port

1. Ensure the clock radio is powered on by connecting the included 9V/3A power adapter.
2. Connect a USB cable (not provided) to the USB port on the rear of the clock radio and to your device's USB port.
3. Your device will indicate when charging is successful.

FCC WARNING

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.

FCC RF EXPOSURE STATEMENT

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

ISEDC CAUTION

This device complies with Innovation, Science, and Economic Development Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device.

ISEDC RF EXPOSURE STATEMENT

The device is in compliance with RF exposure guidelines. Users can obtain Canadian information on RF exposure and compliance.

IMPORTANT LEGAL INFORMATION

IMPORTANT SAFEGUARDS

When using an electrical product, basic precautions should always be followed, including the following:

READ ALL INSTRUCTIONS BEFORE USING

WARNING: Listen responsibly. To avoid hearing damage, make sure the volume on your device is turned down before connecting to the speaker. After turning on your speaker, gradually turn up the volume until you reach a comfortable listening volume.

• Use this product only for its intended use as described in this manual. Do not use attachments not recommended by ONN.
• ONN is not liable for any damage caused to smartphones, iPod/MP3 players, or any other device.
• Do not place or store this product where it can fall or be dropped into a tub or sink.
• Do not place or drop into water or any other liquid.
• Not for use by children. THIS IS NOT A TOY.
• Never operate this product if it has a damaged cord, plug, cable, or housing.
• Keep away from heated surfaces.
• Only set on dry surfaces. Do not place on surfaces wet from water or cleaning solvents.
• Please use the standard power adapter equipped with this unit.
• The charging input and output ports, please do not connect to any faulty equipment to avoid the irreversible damage of the unit.
• Do not use in a strong magnetic or strong interference field, otherwise it may cause the machine to be functionally unusual.
• The product is for indoor use only.

A MESSAGE FROM THE ENVIRONMENT

WARNING: This product has an internal, non-replaceable lithium-ion battery. Please dispose of in accordance with your local, state, province, and country guidelines. This product contains small parts that may present a choking hazard for young children.

CAUTION: All servicing of this product must be performed by authorized service personnel only.

ONN is a trademark of Walmart Stores, Inc. The 'Qi' symbol is a trademark of the Wireless Power Consortium. The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc., and any use of such marks by ONN is under license. Distributed by Walmart Stores, Inc., Bentonville, AR; 72716. 1-800-925-6278. © 2018 Walmart Stores, Inc. All rights reserved.