M-Audio OXYGEN25 USB Keyboard le Pad MIDI Controller

Selelekela

Litaba tsa Lebokose

• Oksijene Series MKV Keyboard
• Cable ea USB
• Software Download Card
• Tataiso e potlakileng
• Buka ea Tšireletseho & Tiisetso

Tšehetso

Bakeng sa tlhaiso-leseling ea morao-rao mabapi le sehlahisoa sena (litlhoko tsa sistimi, tlhaiso-leseling ea ho lumellana, joalo-joalo) le ngoliso ea sehlahisoa, etela m-audio.com.
Bakeng sa tšehetso e eketsehileng ea sehlahisoa, etela m-audio.com/support.

Tlhophiso

Ho kopanya Keyboard ea hau

O ka matlafatsa line ka boema-kepe bo tsamaeang ka USB. Li-keyboards tsa Oxygen ke lisebelisoa tse nang le matla a tlase. Ho kgothaletswa hore o hoketse khiboto ea Oxygen ho koung ea USB e kahare kapa ho hub ea USB e tsamaeang ka motlakase.

Kemiso ea pele - setup ea DAW

Oxyjene ea hau e na le bokhoni ba ho laola li-fade, li-knob tsa DAW, maemong a mang lipampiri tsa ho tsebisa likoto, hammoho le lisebelisoa tsohle tsa lisebelisoa tsa hau. E le hore lits'oants'o tsena li beoe hantle, re tla hloka pele hore Oxygen ea hau e be le DAW ea hau.

1. Tobetsa konopo ea PRESET / DAW hore konopo ea DAW e bonesoe, 'me konopo ea Oxygen e mochining oa DAW.
2. Tobetsa o tšoare konopo ea PRESET / DAW ho bula DAW Select menu ho Display.
3. Ha o ntse o tsoela pele ho tobetsa le ho ts'oara konopo ea PRESET / DAW, tobetsa likonopo tsa <kapa> ho potoloha ka li-DAW tse fumanehang ho Display. Ha o ntse o tobetsa likonopo tsa <kapa>, DAW e khethiloeng hajoale e tla nchafatsa ho Display.
4. Ha DAW eo o e batlang e bontšoa ho Display, lokolla Button ea PRESET / DAW ho netefatsa khetho ea hau.

Boholo ba li-DAW li tla amohela li-keyboard tsa Oxygen, ebe li hlophisa taolo ea hau ea oksijene joalo ka taolo ea DAW, le molaoli oa lisebelisoa tsa mofuta oa Preset.
Haeba DAW ea hau e sa iketsetse li-keyboard tsa Oxygen, ka kopo latela mehato ea ho seta e thathamisitsoeng ho Oxygen DAW Setup Guides.

• NC1: Mackie 1: E tla romella melaetsa e tloaelehileng ea Mackie. Taolo ea Mackie e sebelisoa haholo bakeng sa li-DAW tse kang Cubase, Studio One le Reaper.
• NC2: Mackie 2. E tla romella melaetsa e tloaelehileng ea Mackie, empa ka tharollo e phahameng bakeng sa lipitsa. Haeba pane ea hau ea DAW e sa khone ho fiela pitsa ea pan ka botlalo, sebelisa Mackie 2. Taolo ea Mackie e sebelisoa haholo bakeng sa li-DAW tse kang Cubase, Studio One le Reaper.
• M | h: Mackie / HUI e tla romella melaetsa e tloaelehileng ea Mackie / HUI bakeng sa li-DAW tse kang Pro Tools le Logic.
• N1: MIDI 1 e tla romella sete e le 'ngoe ea melaetsa e tloaelehileng ea MIDI e ka sebelisoang le Ableton.
• N2: MIDI 2 e tla romella sete e le 'ngoe ea melaetsa e tloaelehileng ea MIDI e ka sebelisoang le MPC Beats, le Lebaka.
• N3: MIDI 3 e tla romella sete e le 'ngoe ea melaetsa e tloaelehileng ea MIDI e ka sebelisoang le Ableton bakeng sa ho laola ho qalisoa ha clip, le likarolo tse ling tse tsoetseng pele.

Kemiso ea pele - Sesebelisoa sa Virtual / Plugin

Kaha joale u khethile DAW e nepahetseng. re tla beha oksijene ea hau hore e sebetse le lisebelisoa tsohle tsa Virtual plugins, le Sesebelisoa sefe kapa sefe sa Virtual plugins o ka ba le.

1. Tobetsa konopo ea PRESET / DAW hore konopo ea DAW e se ke ea bonesoa, 'me Oxygen e se e le maemong a Preset.
2. Tobetsa konopo ea <kapa> ho potoloha ka li-Presets tse fumanehang ho Display. Ha o ntse o tobetsa likonopo, Preset e khethiloeng hajoale e tla hlaha ho Display. U ka iketsetsa li-presets tsa hau tsa tloaelo, u sebelisa Oxygen Preset Editor Software.
3. Sete e seng e setiloe eo u e batlang e khethiloe kamora hore o khaotse ho tobetsa likonopo tsa <kapa>.

Ho na le li-Presets bakeng sa Lisebelisoa tsohle tsa Virtual tse kenyellelitsoeng le Oxygen ea hau. Bakeng sa Lisebelisoa tsa Virtual tse sa kenyellelitsoeng le Oxygen ea hau, re khothaletsa ho sebelisa MPC Beats e le sephutheloana sa polokelo ho DAW eo u e ratang haholo, le seteishene sa Oxygen's Preset 1 - MPC PI. MPC Beats e bula joalo ka plugin ho li-DAW tsohle tse tloaelehileng ho kopanya tse ntlehali ho feta lefats'e lohle la DAW. Sena se u fa bolokolohi ba ho sebelisa MPC Beats e le sesebelisoa sa polasetiki se bonolo sa synth / Virtual Instrument, se u nolofalletsang ho ba le lits'oants'o tsohle tsa oksijene tse ipapisitseng le 'mapa oa hau o bonolo oa synth / Virtual Instrument plugin.
Ho jarolla software e kenyellelitsoeng ea MPC Beats, latela litaelo tse fumanehang kareteng ea download software.

Li-Presets

1. MPC PI
2. Hybrid 3
3. Mini Grand
4. Velvet
5. 2
6. Phula
7. Boom
8. DB33
9. Kakaretso MIDI
10. Kakaretso MIDI

Ho kenya Software ea hau e kenyellelitsoeng

Re khothaletsa ho ngodisa keyboard ea Oxygen ho m-audio.com le ho jarolla Oxygen Series Software Manager. Latela litaelo ho Karete ea hau ea Tjarollo ea Software ho kenyelletsa Oxygen Series Software Manager.

Li-DAW le Lisebelisoa tsa Virtual
Ho Software Manager o tla khona ho fumana software eohle ea hau e kenyellelitsoeng.
Re kenyelelitse li-DAW tse 2, MPC Beats, le Ableton Live Lite ka keyboard ea hau ea Oxygen series hore o tle o qale ho etsa mmino ka software ea profeshenale ka ntle ho lebokose. Ntle le moo, re kenyelelitse sete ea MPC Beats Packs tsa Katoloso le MOEA sesebelisoa sa sebele plugins eo u ka e sebelisang le DAW ea hau.
Ho jarolla MPC Beats e kenyelelitsoeng, kapa software ea Ableton Live Lite DAW, AIR sesebelisoa sa sebele plugins, le MPC Beats Katoloso ea Lipakete, ngolisa Oxygen ea hau ho m-audio.com le download the Oksijene Series Software Manager. The Oksijene Series Software Manager e tla u tataisa mohato ka mohato mabapi le ho jarolla le ho kenya software eohle ea hau e kenyellelitsoeng.

Setheo sa Preset
Ho jarolla software e kenyellelitsoeng ea Preset Editor, latela litaelo ho Oxygen Series Software Manager. Software ena ea mohlophisi e fumanoa ha lebokose la "Show Advanced Software" le hlahlojoa ho Oxygen Series Software Manager. Software ea Preset Editor e ka sebelisoa ho etsa limmapa tse tloahelehileng tsa Preset tseo u ka li jarang ho keyboard ea hau ea Oxygen series. Mohlophisi oa Preset o boetse o tla le eona Mohlophisi oa Tataiso ea mosebelisi.

MPC Beats
Ho jarolla software e kenyellelitsoeng ea MPC Beats, latela litaelo tse hlahang ho Oksijene Series Software Manager. MPC Beats e na le tlhaiso-leseling ea ho sebelisa DAW le soft synth / Virtual Instrument plug wrapper e hahiloeng lefeng la thepa e tsebahalang ea AKAI Pro MPC le software e ncha ea desktop ea MPC2, MPC Beats e matlafatsa baetsi ba morethetho o mocha ka lisebelisoa tsohle ho theha meropa e llang le tse ling .
Bakeng sa kopanyo e felletseng le li-DAW tse seng li ntse li le teng, MPC Beats e bula joalo ka plugin ho li-DAW tsohle tse tloaelehileng ho kopanya tse ntlehali ho feta lefats'e lohle la DAW. Sena se u fa bolokolohi ba ho sebelisa MPC Beats e le sesebelisoa se bonolo sa synth / Virtual Instrument plugin, se u nolofalletsang ho ba le lits'oants'o tsohle tsa oksijene tse ipapisitseng le 'mapa oa hau o bonolo oa synth / Virtual Instrument plugin.

Likaroloana

Oxyjene 25 - Karolo e Holimo

Octave / Mabili

1. PITCH: Lebili lena le baka liphetoho tse hlakileng litšoantšisong ka ho phahamisa le ho theola molumo.
   Ho pitikisa lebili la Pitch Bend ho ea holimo ho tla phahamisa molumo oa seletsa athe ho se tsamaisa tlase ho tla theola molumo.
   Moeli o kaholimo le o tlase oa sekontiri se koaloa o khethoa ke li-setting ho sesebelisoa sa hau sa software kapa software, eseng ka lebili la Pitch Bend ho keyboard ea Oxygen 25 ka boyona. Ka tloaelo, ena e ka ba halofo ea noto kapa octave up / down.
   Lebili lena le kentsoe nakong ea selemo 'me le tla khutlela setsing sa litente ha le lokolloa.
2. Mod (Modulation): Lebili lena le sebelisetsoa ho eketsa polelo ho litšoantšiso ka ho fetola matla a litlamorao tse itseng.
   Ka nako e sa lekanyetsoang, li-synthesizers tse ngata li abela lebili lena ho laola vibrato (ho fetola molumo) kapa tremolo (ho fetola molumo) leha ho le bonolo ho fana ka ts'ebetso ea sena
   lebili ka phanele ya taolo ya seletsa.
   Ho sutumetsa Modulation Wheel holimo ho tla eketsa ts'ebetso ea modulation, ha ho theohela tlase ho tla fokotsa phello.
   Modulation Wheel ke molaoli ea abeloang ea khonang ho romella melaetsa e fapaneng ea MIDI ntle le data ea Modulation.
3. OCTAVE - / +: Li-button tsa Octave li sebelisetsoa ho sututsa octave ea keyboard ho ea holimo kapa tlase ka keketseho e le 'ngoe ea octave, ho holisa lethathamo la octave la lipads kapa linotlolo.
   FETOHA: Tšoara PHATHISA ebe o tobetsa e 'ngoe ea likonopo tsena ho fetisetsa lebokose holimo kapa tlase.
4. Keybed: Khiboto e mameloang ka lebelo ha se mokhoa o ka sehloohong oa ho romella data ea Note On / Off le velocity ha o etsa. E boetse e sebelisetsoa ho fihlella mesebetsi e atolositsoeng ea ho etsa mananeo e thathamisitsoeng ka lehlakoreng le kaholimo.
   Tšoara PHATHISA ebe o tobetsa konopo e tšoailoeng ho fihlella mesebetsi ena e meng ea mananeo:
   Hlokomela: Liphetoho tsa Key li ipapisitse le mokhoa o sebetsang hajoale. Bakeng sa example, haeba mokhoa oa Smart Chord o sebetsa, mesebetsi e le 'ngoe feela ea Shift modifier e tla ba teng bakeng sa ts'ebetso ea Smart Chord.
   Mefuta ea Arpeggiator:
   • ARP CTRL (Taolo ea Arpeggiator): Laola litlhophiso tsa Arpeggiator bakeng sa mekhahlelo e latelang:
     UP, DOWN, INCL, EXCL, ORDER, RANDOM, le CHORD: E khetha hore na lintlha tsa tatellano li tla lla joang ha linotlolo li hatisoa.
   • KEITI: E laola bolelele ba molaetsa o hlalositsoeng.
   • Ballon: E laola ho kheloha ha morethetho oa lintlha tse hatisitsoeng.
   • OCT 0, OCT 1, OCT 2: E laola hore na ke li-octave tse kae tse tla bapaloa ka paterone e kopantsoeng.
   • NAKO DIV (Nako ea Karolo): E khetholla nako le morethetho oa ho pheta-pheta noto le arpeggiator. Laola Arp, le Litlhophiso tsa Pheta Nako ea Nako bakeng sa mekhahlelo e latelang: 1/4, 1/4T, 1/8, 1/8T, 1/16, 1/16T, 1/32, 1/32T.

Lisebelisoa tsa Smart Chord le Scale:

• KEY: E khetha lintlha tsa bohlokoa tseo lintlha li tla li sebelisa ho Smart Chord kapa Smart Scale. Laola litlhophiso tsa Key bakeng sa mekhahlelo e latelang: C, Db, D, Eb, E, F, Gb, G, Ab, A, Bb, B.
• HO BUA (Mokhoa oa Smart Chord feela): E khetha mofuta oa mofuta o felletseng o tla bapaloa ha konopo e le 'ngoe e tobetsoa.
  Laola litlhophiso tsa SMART CHORD bakeng sa mekhahlelo e latelang: 1,3,5; 1,3,7; 1,3,5,7; 1,5,9; 1,5,12; 3,5,1; 5,1,3; RETS'ELISITSOE.
• MOFUTA: E khetha khetho le mofuta oa 'mino o tla sebelisoa ha ho sebelisoa KHAULE TS'EANE or MOEKETSI MOHAPI tšobotsi.
  Laola maemo a Smart Chord MODE bakeng sa mekhahlelo e latelang: HOLO, E MONYANE, BOPHELO.
  Laola maemo a Smart Scale MODE bakeng sa mekhahlelo e latelang: HOLO, PENTATONIC MAJOR, MINOR, MELODIC MINOR, HARMONIC MINOR, PENTATONIC MINOR, CUSTOM DORIAN, CUSTOM BLUES.

Litsela tsa MIDI le Velocity Parameter:

• CHANEL DOWN, UP: E khetha mocha ofe oa MIDI o tla sebelisoa ho fetisetsa linotlolo, mekotla kapa litsamaiso.
• VELOCITY: E fetola lebelo la Velocity bakeng sa linotlolo kapa mekotla ho latela hore na ke li taolo life tse qetileng ho hatelloa.

Ho fihlella likarolo tse ling, sheba software ea Preset Editor ho m-audio.com.

Mesebetsi e Bohareng

5. Hlahisa: Oxygen 25 e na le ponts'o ea LED ea linomoro tse 3 e fanang ka tlhaiso-leseling e bonts'ang mabapi le ts'ebetso ea hajoale, lenaneo le boemo ba taolo.
   Li-LED tsa matheba a mararo ho Display li tsamaellana le o mong oa mekhoa e 3 e fumanehang: ARP, ARP Latch, Smart Chord le Smart Scale.
   • ARP: LED e hotetse ha mofuta oa ARP o sebetsa.
     Leseli le khanya ha mokhoa oa ARP Latch o sebetsa.
   • KHAOLO: LED ea bonesoa ha mokhoa oa Smart Chord o sebetsa.
   • SCALE: LED e hotetse ha Smart Scale mode e sebetsa.
6. SHIFT: Tšoara konopo ea SHIFT ha u ntse u tsamaisa kapa u tobetsa litaelo kapa likonopo lebokoseng ho fihlella mesebetsi ea bona ea bobeli.
7. NAKO: Tlanya konopo ena ho seta tempo ea Oxygen 25. Tobetsa o tšoare konopo ena ebe o sebelisa likonopo tsa <le> ho etsa liphetoho tse eketsehileng ho tempo.
   SYNC: Tobetsa 'me u tšoare SHIFT le konopo ea TEMPO ho fihlella karolo ea SYNC, ho lumella keyboard hore e lumellane le melaetsa ea DAWs Time Clock (Tempo).
   Boemo ba tempo bo ama arpeggiator ea keyboard le mesebetsi ea ho pheta-pheta lintlha.
8. TLHOKOMELISO Pheta: Tobetsa konopo ena ho kenya tšebetsong mosebetsi oa ho pheta-pheta noto bakeng sa Pads.
   LATCH: Ho koalla mosebetsi o pheta-phetoang, ts'oara SHIFT ebe o tobetsa konopo ena.
   Ha Pheta-pheto ea Lintlha e ntse e sebetsa, ts'oara SHIFT ebe o tobetsa linotlolo tsa Time Division ho fetola maemo a hajoale a Time Division a Arpeggiator le Pad Note Repeat.
9. TLHOKOMELISO PHETA (LED): Leseli lena le tla bonesoa ka tieo ha Pheta-pheto ea Tsebiso e sebetsa.
10. <,>: Likonopo tsa <le> li tla khetha li-presets ha li le ho Preset mode.
    <KHETHO EA KHETHO>: Ha SHIFT e ts'oaroa mme e 'ngoe ea likonopo tsena e hatelloa, mokhoa o sebetsang o tla fetoha (ARP, ARP Latch, Smart Chord, Smart Scale, kapa ha ho mode e sebetsang).
    Ho bulela kapa ho tima mokhoa o sebetsang hajoale, tobetsa konopo tsa <le> ka nako e le ngoe. Bakeng sa example, haeba Smart Scale e sebetsa, ho tobetsa konopo tsa <le> ka nako e le ngoe ho tla etsa hore Smart Scale mode e sebetse ebe e khutlisetsa keybed ts'ebetsong ea eona e tloaelehileng.
    U ka tima mekhoa eohle ka ho tobetsa likonopo tsa <kapa> ho fihlela konopo ea Mode e sa bonesoe.
    Hlokomela: Ho ipapisitse le hore na keyboard e ntse e le ka har'a li-button li tla fetoha joang.
    Mokhoa oa DAW: Ka mokhoa oa DAW, <le> e tla phenya libanka tsa pina.
    Mokhoa oa ho seta esale pele: Ka Mokhoa oa Preset, likonopo tsa <le> li tla phenya li-presets. Ho Edita Mode, li tla potoloha ka taolo e khethiloeng e ka fetoloang hajoale.
    Hlokomela Pheta: Ha Pheta-pheto ea Lintlha e ntse e sebetsa likonopo tsa <le> li tla phallela holimo le tlase ka maemo a karohano ea nako.
11. DAW / PRESET: Ha konopo ena e petelitsoe, e tla etsa hore keyboard ea Preset kapa DAW e sebetse ho fader, likonopo, konopo le mekotla.
    Ha mofuta oa DAW o sebetsa, li-control (Fader, Fader button, <and>, pads, le likonopo) li tla romella melaetsa ea Mackie, Mackie / HUI, kapa MIDI CC, ho latela hore na DAW e khethiloe.
    Ha mofuta oa Preset o sebetsa, khetho ea Preset e tla u bulela hore u sebelise likonopo tsa <le> ho khetha lenaneng la li-presets tsa Virtual Instrument.
    BOHLOKOA: Ho fetola seo DAW e se khethileng ha joale, tobetsa o hatelle konopo ea SHIFT le konopo ea DAW / PRESET.
    • NC1: Mackie 1: E tla romella melaetsa e tloaelehileng ea Mackie. Taolo ea Mackie e sebelisoa haholo bakeng sa li-DAW tse kang Cubase, Studio One le Reaper.
    • NC2: Mackie 2. E tla romella melaetsa e tloaelehileng ea Mackie, empa ka tharollo e phahameng bakeng sa lipitsa. Haeba pane ea hau ea DAW e sa khone ho fiela pitsa ea pan ka botlalo, sebelisa Mackie 2. Taolo ea Mackie hangata e sebelisoa bakeng sa li-DAW tse kang Cubase, Studio One le Reaper.
    • M | h: Mackie / HUI e tla romella melaetsa e tloaelehileng ea Mackie / HUI bakeng sa li-DAW tse kang Pro Tools le Logic.
    • N1: MIDI 1 e tla romella sete e le 'ngoe ea melaetsa e tloaelehileng ea MIDI bakeng sa ts'ebeliso le Ableton.
    • N2: MIDI 2 e tla romella sete e le 'ngoe ea melaetsa e tloaelehileng ea MIDI e ka sebelisoang le MPC Beats, le Lebaka.
    • N3: MIDI 3 e tla romella sete e le 'ngoe ea melaetsa e tloaelehileng ea MIDI e ka sebelisoang le Ableton bakeng sa ho laola ho qalisoa ha clip, le likarolo tse ling tse tsoetseng pele.
12. DAW (LED): Leseli lena le tla bonesoa le tiile ha mofuta oa DAW o sebetsa.

Konopo ea Fader / Fader

13. FADER: E romela mefuta e fapaneng ea melaetsa e tloaelehileng ea MIDI CC kapa melaetsa e tsoetseng pele ea MIDI e ipapisitse le paramethara eo u e abetsoeng kapa sete e seng e entsoe.
    Mokhoa oa DAW: E romella melaetsa ea Fader channel bakeng sa Track Faders kapa lisebelisoa tse ling tsa DAW.
    Mokhoa o seng o setiloe: E romella melaetsa e seng e boletsoe esale pele kapa melaetsa e fetolehang ea MIDI CC.
14. Konopo ea FADER: Konopo ena e ka sebetsoang e ka abeloa ho romella Note, CC le melaetsa e meng ea MIDI.
    Mokhoa oa DAW: E romella melaetsa ea Mackie / HUI kapa melaetsa ea CC e boletsoeng esale pele.
    Mokhoa o seng o setiloe: E romella melaetsa e seng e boletsoe esale pele kapa melaetsa e fetolehang ea MIDI CC.

Likotola / Tsamaiso ea Tsamaiso

15. Likotlo 1-8: E romela mefuta e fapaneng ea melaetsa e tloaelehileng ea MIDI CC kapa melaetsa e tsoetseng pele ea MIDI e ipapisitse le paramethara eo u e abetsoeng kapa sete e seng e entsoe. Konopo e ngoe le e ngoe e ka abeloa paramethara e fapaneng ea MIDI.
    Mokhoa oa DAW: E romella Mackie / HUI e boletsoeng esale pele, melaetsa ea Mackie kapa melaetsa ea CC e boletsoeng esale pele bakeng sa Track Volume, Panning, Device, kapa Send.
    Mokhoa oa ho seta esale pele: E romella melaetsa e fetolehang ea MIDI ka mokhoa o hlophisitsoeng pele ho 1-10.
16. (Loop): Tobetsa konopo ena ho kenya ts'ebetsong / ho tima ts'ebetso ea loop ho DAW ea hau.
17. (Ema): Tobetsa konopo ena ho emisa pina e bulehileng ho DAW ea hau.
    Tobetsa konopo habeli ho emisa pina ebe u khutlisetsa hlooho ea papali qalong ea pina.
    Shift and Press PANIC: E romela molaetsa "All Notes Off" ho liteishene tsohle tse 16 tsa MIDI.
18. (Bapala): Tobetsa konopo ena ho bapala pina ho DAW ea hau.
19. (Tlaleho): Tobetsa konopo ena ho kenya tšebetsong rekoto ho DAW ea hau.

Liphatlalatso

20. Mekhoa ea 1-8: Tobetsa mekotla ena e mamelang lebelo ho romela lintlha tsa Note On / Off le velocity ha u etsa.
    Tšoara PHATHISA ebe o tobetsa pad ho e fetola ho kenya ts'ebetso ea eona ea bobeli:
    PAD BANK 1 (Pad 1): Khetha banka ea pad bakeng sa mekotla eohle ea 1-8.
    PAD BANK 2 (Pad 2): Khetha banka ea pad bakeng sa mekotla eohle ea 1-8.
    TAOLE LEKHOTLA DAW
    Behantsha likotola tsohle 1-8 ho:
    BUKA (Pad 5): Konopo ka 'ngoe e tla fetola molumo oa pina e tsamaellanang le software.
    PAN (Pad 6): Konopo ka 'ngoe e tla kenya pina e tsamaellanang le software.
    TLHAHISO (Pad 7): Konopo e 'ngoe le e' ngoe e tla laola taolo ea lisebelisoa tsa pina e tsamaellanang ea software.
    E ETSA (Pad 8): Konopo ka 'ngoe e tla laola boemo ba thepa e romelloang bakeng sa pina e tsamaellanang ea software.
    Hlokomela: Ha se mesebetsi eohle ea kotola e tla fumaneha DAW e ngoe le e ngoe.

Panele e ka morao

1. USB: Boema-kepe ba USB 2.0 bo fana ka matla lebokoseng mme bo fetisetsa data ea MIDI ha e hokeloa khomphuteng.
2. TLHOKOMELISO: Kakanyo ena e amohela leoto la maoto la ho ikopanya le motsotsoana (ha le kenyelelitsoe). Ha o tobetsa, pedal ena e tla boloka molumo oo u o bapalang ntle le ho boloka menoana ea hau e tobetsa linotlolo.
   Tlhokomeliso: Polarity ea pedal pedal e khethoa ke keyboard ha e qala. Ha keyboard ea Oxygen 25 e ntse e phahama, ho nahanoa hore pedal e maemong a "holimo" (Off). Ho bohlokoa hore pedal e sa hatelloe nakong ea ho qala, ho seng joalo pedal e tla khutlisa tšebetso ea eona, 'me lintlha li tla ts'ehetsa ha pedal e sa hatelloa.
3. MATLA ON / TSOANG: Sebelisa sesebelisoa sena ho tima kapa ho tima sesebelisoa. Ha sesebelisoa sena se behiloe boemong ba "on", Oxygen 25 e sebelisoa ka khokelo ea USB khomphuteng ea hau.
4. Kensington Lock: Sehokedi sena se tsamaellana le likhoele tsa ts'ireletso tsa Kensington tse tloaelehileng bakeng sa ts'ireletso ea bosholu.

Top Panel

Octave / Mabili

1. PITCH: Lebili lena le baka liphetoho tse hlakileng litšoantšisong ka ho phahamisa le ho theola molumo.
   Ho pitikisa lebili la Pitch Bend ho ea holimo ho tla phahamisa molumo oa seletsa athe ho se tsamaisa tlase ho tla theola molumo.
   Moeli o kaholimo le o tlase oa sekontiri se koaloa o khethoa ke li-setting ho sesebelisoa sa hau sa software kapa software, eseng ka lebili la Pitch Bend ho keyboard ea Oxygen 49 ka boyona. Ka tloaelo, ena e ka ba halofo ea noto kapa octave up / down.
   Lebili lena le kentsoe nakong ea selemo 'me le tla khutlela setsing sa litente ha le lokolloa.
2. Mod (Modulation): Lebili lena le sebelisetsoa ho eketsa polelo ho litšoantšiso ka ho fetola matla a litlamorao tse itseng.
   Ka nako e sa lekanyetsoang, li-synthesizers tse ngata li abela lebili lena ho laola vibrato (phetoho ea molumo) kapa tremolo (ho fetola molumo) leha ho le bonolo ho fana ka ts'ebetso ea lebili lena ka phanele ea taolo ea sesebelisoa.
   Ho sutumetsa Modulation Wheel holimo ho tla eketsa ts'ebetso ea modulation, ha ho theohela tlase ho tla fokotsa phello.
   Modulation Wheel ke molaoli ea abeloang ea khonang ho romella melaetsa e fapaneng ea MIDI ntle le data ea Modulation.
3. OCTAVE - / +: Li-button tsa Octave li sebelisetsoa ho sututsa octave ea keyboard ho ea holimo kapa tlase ka keketseho e le 'ngoe ea octave, ho holisa lethathamo la octave la lipads kapa linotlolo. FETOHA: Tšoara PHATHISA ebe o tobetsa e 'ngoe ea likonopo tsena ho fetisetsa lebokose holimo kapa tlase.
4. Keybed: Khiboto e mameloang ka lebelo ha se mokhoa o ka sehloohong oa ho romella data ea Note On / Off le velocity ha o etsa. E boetse e sebelisetsoa ho fihlella mesebetsi e atolositsoeng ea ho etsa mananeo e thathamisitsoeng ka lehlakoreng le kaholimo.
   Tšoara SHIFT ebe o tobetsa konopo e tšoailoeng ho fihlella mesebetsi ena e meng ea ho etsa mananeo: Tlhokomeliso: Liphetoho tsa Key li ipapisitse le mofuta ofe o sebetsang hajoale. Bakeng sa example, haeba mokhoa oa Smart Chord o sebetsa, mesebetsi e le 'ngoe feela ea Shift modifier e tla ba teng bakeng sa ts'ebetso ea Smart Chord.
   Mefuta ea Arpeggiator:
   • ARP CTRL (Arpeggiator Control): Laola litlhophiso tsa Arpeggiator bakeng sa mekhahlelo e latelang:
     UP, DOWN, INCL, EXCL, ORDER, RANDOM, le CHORD: E khetha hore na lintlha tsa tatellano li tla lla joang ha linotlolo kapa li-pads li petelitsoe.
   • GATE: E laola bolelele ba lengolo le hlalositsoeng.
   • Swing: E ​​laola ho kheloha ha morethetho oa lintlha tse qotsitsoeng.
   • OCT 0, OCT 1, OCT 2: e laola hore na ke li-octave tse kae tse tla bapaloa ka paterone e kopantsoeng.
   • NAKO DIV (Karohano ea Nako) - E khetholla nako le morethetho oa pheta-pheto ea noto le arpeggiator. Laola Arp, le Litlhophiso tsa Pheta-pheta Nako ea Nako bakeng sa mekhahlelo e latelang: 1/4, 1 / 4T, 1/8, 1 / 8T, 1/16, 1 / 16T, 1/32, 1 / 32T.

Lisebelisoa tsa Smart Chord le Scale:

• KEY: E khetha lintlha tsa bohlokoa tseo lintlha li tla li sebelisa ho Smart Chord kapa Smart Scale. Laola lisebelisoa tsa Smart Chord le Smart Scale Key bakeng sa mekhahlelo e latelang: C, Db, D, Eb, E, F, Gb, G, Ab, A, Bb, B.
• HO BUA (Mokhoa oa Smart Chord feela): E khetha mofuta oa mofuta o felletseng o tla bapaloa ha konopo e le 'ngoe e tobetsoa.
  Laola maemo a Smart Chord bakeng sa mekhahlelo e latelang: 1,3,5; 1,3,7; 1,3,5,7; 1,5,9; 1,5,12; 3,5,1; 5,1,3; RETS'ELISITSOE.
• MOFUTA: E khetha mofuta oa 'mino o tla sebelisoa ha o sebelisa sesebelisoa sa Smart Chord kapa Smart Scale.
  Laola maemo a Smart Chord le Smart Scale Mode bakeng sa mekhahlelo e latelang: HOLO, E MONYANE, BOPHELO.
  Laola maemo a Smart Scale MODE bakeng sa mekhahlelo e latelang: HOLO, PENTATONIC MAJOR, MINOR, MELODIC MINOR, HARMONIC MINOR, PENTATONIC MINOR, CUSTOM DORIAN, CUSTOM BLUES.

MIDI Channel, Velocity Curve, le Panic Parameter:

• CHANEL DOWN, UP: E khetha mocha ofe oa MIDI o tla sebelisoa ho fetisetsa linotlolo, mekotla kapa litsamaiso.
• VELOCITY: E fetola lebelo la Velocity bakeng sa linotlolo kapa mekotla ho latela hore na ke taolo efe e qetileng ho hatelloa.
• TSHABO: E romella molaetsa oa "All Notes Off" liteisheneng tsohle tsa MIDI tse 16.
  Ho fihlella mesebetsi e meng, sheba software ea Preset Editor ho m-audio.com.

Mesebetsi e Bohareng

5. Hlahisa: Oxygen 49 e na le ponts'o ea LED ea linomoro tse 3 e fanang ka tlhaiso-leseling e bonts'ang mabapi le ts'ebetso ea hajoale, lenaneo le boemo ba taolo.
   Li-LED tsa matheba a mararo ho Display li tsamaellana le o mong oa mekhoa e 3 e fumanehang: ARP, ARP Latch, Smart Chord le Smart Scale.
   • ARP: LED e hotetse ha mofuta oa ARP o sebetsa.
     Leseli le khanya ha mokhoa oa ARP Latch o sebetsa.
   • KITSO: LED e hotetse ha mofuta oa Smart Chord o sebetsa.
   • LEKALA: LED e hotetse ha mokhoa oa Smart Scale o sebetsa.
6. SHIFT: Tšoara konopo ea SHIFT ha u ntse u tsamaisa kapa u tobetsa litaelo kapa likonopo lebokoseng ho fihlella mesebetsi ea bona ea bobeli.
7. NAKO: Tlanya konopo ena ho seta tempo ea Oxygen 49. Tobetsa o tšoare konopo ena ebe o sebelisa likonopo tsa <le> ho etsa liphetoho tse eketsehileng ho tempo.
   SYNC: Tobetsa 'me u tšoare SHIFT le konopo ea TEMPO ho fihlella karolo ea SYNC, ho lumella keyboard hore e lumellane le melaetsa ea DAWs Time Clock (Tempo).
   Boemo ba tempo bo ama arpeggiator ea keyboard le mesebetsi ea ho pheta-pheta lintlha.
8. TLHOKOMELISO Pheta: Tobetsa konopo ena ho kenya tšebetsong mosebetsi oa ho pheta-pheta noto bakeng sa Pads.
   LATCH: Ho koalla mosebetsi o pheta-phetoang, ts'oara SHIFT ebe o tobetsa konopo ena.
   Ha Pheta-pheto e ntse e sebetsa ts'oara SHIFT ebe o tobetsa linotlolo tsa Time Division ho fetola maemo a hajoale a Time Division a Arpeggiator le Pad Note Repeat.
9. TLHOKOMELISO PHETA (LED): Leseli lena le tla bonesoa ka tieo ha Pheta-pheto ea Tsebiso e sebetsa.
10. <,>: Likonopo tsa <le> li tla khetha li-presets ha li le ho Preset mode.
    <MODE, MODE>: Ha SHIFT e ts'oaroa mme e 'ngoe ea likonopo tsena e hatelloa, mokhoa o sebetsang o tla fetoha (ARP, ARP Latch, Smart Chord, kapa Smart Scale).
    Ho bulela kapa ho tima mokhoa o sebetsang hajoale, tobetsa konopo tsa <le> ka nako e le ngoe. Bakeng sa example, haeba Smart Scale e sebetsa, ho tobetsa konopo tsa <le> ka nako e le ngoe ho tla etsa hore Smart Scale mode e sebetse ebe e khutlisetsa keybed ts'ebetsong ea eona e tloaelehileng.
    Tlhokomeliso: Ho latela hore na keyboard e ntse e le ka har'a li-button li tla fetoha joang.
    Mokhoa oa DAW: Ka mokhoa oa DAW, <le> e tla phenya libanka tsa pina.
    Mokhoa oa Preset: Ka Mokhoa oa Preset, likonopo tsa <le> li tla phenya li-presets. Ho Edita Mode, li tla potoloha ka taolo e khethiloeng e ka fetoloang hajoale.
    Hlokomela Pheta: Ha Pheta-pheto ea Lintlha e ntse e sebetsa likonopo tsa <le> li tla phallela holimo le tlase ka har'a li-setting tsa nako.
11. DAW / PRESET: Ha konopo ena e petelitsoe, e tla kenya tšebetsong tšebetso ea keyboard ea Preset kapa DAW ho faders, knobs, button le pads.
    Ha mofuta oa DAW o sebetsa, li-control (li-Fader, li-button tsa Fader, <le>, lipads le likotola) li tla romella melaetsa ea Mackie, Mackie / HUI, kapa MIDI CC, ho latela hore na DAW e khethiloe.
    Ha mofuta oa Preset o sebetsa, khetho ea Preset e tla u bulela hore u sebelise likonopo tsa <le> ho khetha lenaneng la li-presets tsa Virtual Instrument.
    BOHLOKOA: Ho fetola seo DAW e se khethileng ha joale, tobetsa o tšoare konopo ea SHIFT le konopo ea DAW / PRESET.
    • NC1: Mackie 1: E tla romella melaetsa e tloaelehileng ea Mackie. Taolo ea Mackie e sebelisoa haholo bakeng sa li-DAW tse kang Cubase, Studio One, Logic le Reaper.
    • NC2: Mackie 2. E tla romella melaetsa e tloaelehileng ea Mackie, empa ka tharollo e phahameng bakeng sa lipitsa. Haeba pane ea hau ea DAW e sa khone ho fiela pitsa ea pan ka botlalo, sebelisa Mackie 2. Taolo ea Mackie e sebelisoa haholo bakeng sa li-DAW tse kang Cubase, Studio One, Logic le Reaper.
    • M | h: Mackie / HUI e tla romella melaetsa e tloaelehileng ea Mackie / HUI bakeng sa li-DAW tse kang Pro Tools le Logic.
    • N1: MIDI 1 e tla romella sete e le 'ngoe ea melaetsa e tloaelehileng ea MIDI bakeng sa ts'ebeliso le Ableton.
    • N2: MIDI 2 e tla romella sete e le 'ngoe ea melaetsa e tloaelehileng ea MIDI e ka sebelisoang le MPC Beats, le Lebaka.
    • N3: MIDI 3 e tla romella sete e le 'ngoe ea melaetsa e tloaelehileng ea MIDI e ka sebelisoang le Ableton bakeng sa ho laola ho qalisoa ha clip, le likarolo tse ling tse tsoetseng pele.
12. DAW (LED): Leseli lena le tla bonesoa le tiile ha mofuta oa DAW o sebetsa.

Baetapele / Likonopo

13. Baetapele 1-9: E romela mefuta e fapaneng ea melaetsa e tloaelehileng ea MIDI CC kapa melaetsa e tsoetseng pele ea MIDI e ipapisitse le paramethara eo u e abetsoeng kapa sete e seng e entsoe.
    Mokhoa oa DAW: E romella melaetsa ea Fader channel bakeng sa Track Faders kapa lisebelisoa tse ling tsa DAW.
    Mokhoa o seng o setiloe: E romella melaetsa e seng e boletsoe esale pele kapa melaetsa e fetolehang ea MIDI CC.
14. Likonopo tsa Fader: Li-button tsena tse ka sebetsoang habonolo li ka abeloa ho romella Note, CC le melaetsa e meng ea MIDI.
    Mokhoa oa DAW: E romella melaetsa ea Mackie / HUI kapa melaetsa e boletsoeng esale pele ea CC bakeng sa Track Rec Arm, Track Select, Track Solo, le Track Mute.
    Mokhoa o seng o setiloe: E romella melaetsa e seng e boletsoe esale pele kapa melaetsa e fetolehang ea MIDI CC.
15. Mokhoa oa DAW BUTTON: Ha o le ka har'a DAW mode le PHATHISA 'me konopo ena e petelitsoe, e tla fetola mekhoa ea likonopo tsa Fader lipakeng tsa Track Rec Arm, Track Select, Track Mute, kapa Track Solo.

Likotola / Tsamaiso ea Tsamaiso

16. Likotlo 1-8: E romela mefuta e fapaneng ea melaetsa e tloaelehileng ea MIDI CC kapa melaetsa e tsoetseng pele ea MIDI e ipapisitse le paramethara eo u e abetsoeng kapa sete e seng e entsoe.
    Konopo ka 'ngoe e ka abeloa paramethara e fapaneng ea MIDI.
    Mokhoa oa DAW: E romella Mackie / HUI e boletsoeng esale pele, melaetsa ea Mackie kapa melaetsa e boletsoeng esale pele ea CC bakeng sa Track Panning, Sesebelisoa, kapa Litumello.
    Mokhoa oa ho seta esale pele: E romella melaetsa e fetolehang ea MIDI ka mokhoa o hlophisitsoeng pele ho 1-10.
17. (Loop): Tobetsa konopo ena ho kenya ts'ebetsong / ho tima ts'ebetso ea loop ho DAW ea hau.
18. (Emisa): Tobetsa konopo ena ho emisa pina e bulehileng ho DAW ea hau.
    Tobetsa konopo habeli ho emisa pina ebe u khutlisetsa hlooho ea papali qalong ea pina.
19. (Bapala): Tobetsa konopo ena ho bapala pina ho DAW ea hau.
20. (Rekoto): Tobetsa konopo ena ho kenya letsoho ho rekote ho DAW ea hau.

Liphatlalatso

21. Mekhoa ea 1-8: Tobetsa mekotla ena e mamelang lebelo ho romela lintlha tsa Note On / Off le velocity ha u etsa.
    Tšoara PHATHISA ebe o tobetsa pad ho e fetola ho kenya ts'ebetso ea eona ea bobeli:
    PAD BANK 1 (Pad 1): Khetha banka ea pad bakeng sa mekotla eohle ea 1-8.
    PAD BANK 2 (Pad 2): Khetha banka ea pad bakeng sa mekotla eohle ea 1-8.
    TAOLE LEKHOTLA DAW
    Behantsha likotola tsohle 1-8 ho:
    PAN (Pad 6): Konopo ka 'ngoe e tla kenya pina e tsamaellanang le software.
    TLHAHISO (Pad 7): Konopo e 'ngoe le e' ngoe e tla laola taolo ea lisebelisoa tsa pina e tsamaellanang ea software. SENDS (Pad 8): Konopo e ngoe le e ngoe e tla laola boemo ba mohala o romellang pina e tsamaellanang ea software.
    Hlokomela: Ha se mesebetsi eohle ea kotola e tla fumaneha DAW e ngoe le e ngoe.

Panele e ka morao

5. USB: Boema-kepe ba USB 2.0 bo fana ka matla lebokoseng mme bo fetisetsa data ea MIDI ha e hokeloa khomphuteng.
6. TLHOKOMELISO: Kakanyo ena e amohela leoto la maoto la ho ikopanya le motsotsoana (ha le kenyelelitsoe). Ha o tobetsa, pedal ena e tla boloka molumo oo u o bapalang ntle le ho boloka menoana ea hau e tobetsa linotlolo.
   Hlokomela: Polarity ea pedal e tsitsitseng e khethoa ke keyboard ha e qala. Ha khiboto ea Oxygen 49 e ntse e phahama, ho nahanoa hore pedal e ts'oarellang e maemong a "holimo" (Off). Ho bohlokoa hore pedal e sa hatelloe nakong ea ho qala, ho seng joalo pedal e tla khutlisa tšebetso ea eona, 'me lintlha li tla ts'ehetsa ha pedal e sa hatelloa.
7. MATLA ON / TSOANG: Sebelisa sesebelisoa sena ho tima kapa ho tima sesebelisoa. Ha sesebelisoa sena se behiloe boemong ba "on", Oxygen 49 e sebelisoa ka khokelo ea USB khomphuteng ea hau.
8. Kensington Lock: Sehokedi sena se tsamaellana le likhoele tsa ts'ireletso tsa Kensington tse tloaelehileng bakeng sa ts'ireletso ea bosholu.

Top Panel

Octave / Mabili

1. PITCH: Lebili lena le baka liphetoho tse hlakileng litšoantšisong ka ho phahamisa le ho theola molumo.
   Ho pitikisa lebili la Pitch Bend ho ea holimo ho tla phahamisa molumo oa seletsa athe ho se tsamaisa tlase ho tla theola molumo.
   Moeli o kaholimo le o tlase oa sekontiri se koaloa o khethoa ke li-setting ho sesebelisoa sa hau sa software kapa software, eseng ka lebili la Pitch Bend ho keyboard ea Oxygen 61 ka boyona. Ka tloaelo, ena e ka ba halofo ea noto kapa octave up / down.
   Lebili lena le kentsoe nakong ea selemo 'me le tla khutlela setsing sa litente ha le lokolloa.
2. Mod (Modulation): Lebili lena le sebelisetsoa ho eketsa polelo ho litšoantšiso ka ho fetola matla a litlamorao tse itseng.
   Ka nako e sa lekanyetsoang, li-synthesizers tse ngata li abela lebili lena ho laola vibrato (phetoho ea molumo) kapa tremolo (ho fetola molumo) leha ho le bonolo ho fana ka ts'ebetso ea lebili lena ka phanele ea taolo ea sesebelisoa.
   Ho sutumetsa Modulation Wheel holimo ho tla eketsa ts'ebetso ea modulation, ha ho theohela tlase ho tla fokotsa phello.
   Modulation Wheel ke molaoli ea abeloang ea khonang ho romella melaetsa e fapaneng ea MIDI ntle le data ea Modulation.
3. OCTAVE - / +: Li-button tsa Octave li sebelisetsoa ho sututsa octave ea keyboard ho ea holimo kapa tlase ka keketseho e le 'ngoe ea octave, ho holisa lethathamo la octave la lipads kapa linotlolo.
   TLHALOSO: Tšoara SHIFT ebe u tobetsa e 'ngoe ea likonopo tsena ho fetisetsa lebokose holimo kapa tlase.
4. Keybed: Khiboto e mameloang ka lebelo ha se mokhoa o ka sehloohong oa ho romella data ea Note On / Off le velocity ha o etsa. E boetse e sebelisetsoa ho fihlella mesebetsi e atolositsoeng ea ho etsa mananeo e thathamisitsoeng ka lehlakoreng le kaholimo.
   Tšoara PHATHISA ebe o tobetsa konopo e tšoailoeng ho fihlella mesebetsi ena e meng ea mananeo:
   Hlokomela: Liphetoho tsa Key li ipapisitse le mokhoa o sebetsang hajoale. Bakeng sa example, haeba mokhoa oa Smart Chord o sebetsa, mesebetsi e le 'ngoe feela ea Shift modifier e tla ba teng bakeng sa ts'ebetso ea Smart Chord.
   Mefuta ea Arpeggiator:
   • ARP CTRL (Arpeggiator Control): Laola litlhophiso tsa Arpeggiator bakeng sa mekhahlelo e latelang:
     UP, DOWN, INCL, EXCL, ORDER, RANDOM, LE CHORD:
     E khetha hore na lintlha li tla lla ka tatellano efe ha linotlolo kapa li-pads li petelitsoe.
   • GATE: E laola bolelele ba lengolo le hlalositsoeng.
   • Swing: E ​​laola ho kheloha ha morethetho oa lintlha tse qotsitsoeng.
   • OCT 0, OCT 1, OCT 2: e laola hore na ke li-octave tse kae tse tla bapaloa ka paterone e kopantsoeng.
   • NAKO DIV (Karohano ea Nako) - E khetholla nako le morethetho oa pheta-pheto ea noto le arpeggiator. Laola Arp, le Litlhophiso tsa Pheta-pheta Nako ea Nako bakeng sa mekhahlelo e latelang: 1/4, 1 / 4T, 1/8, 1 / 8T, 1/16, 1 / 16T, 1/32, 1 / 32T.

Lisebelisoa tsa Smart Chord le Scale:

• KEY: E khetha lintlha tsa bohlokoa tseo lintlha li tla li sebelisa ho Smart Chord kapa Smart Scale. Laola lisebelisoa tsa Smart Chord le Smart Scale Key bakeng sa mekhahlelo e latelang: C, Db, D, Eb, E, F, Gb, G, Ab, A, Bb, B.
• HO BUA (Mokhoa oa Smart Chord feela): E khetha mofuta oa mofuta o felletseng o tla bapaloa ha konopo e le 'ngoe e tobetsoa.
  Laola maemo a Smart Chord bakeng sa mekhahlelo e latelang: 1,3,5; 1,3,7; 1,3,5,7; 1,5,9; 1,5,12; 3,5,1; 5,1,3; RETS'ELISITSOE.
• MOFUTA: E khetha mofuta oa 'mino o tla sebelisoa ha o sebelisa sesebelisoa sa Smart Chord kapa Smart Scale.
  Laola maemo a Smart Chord MODE bakeng sa mekhahlelo e latelang: MAJOR, MINOR, CUSTOM.
  Laola maemo a Smart Scale MODE bakeng sa mekhahlelo e latelang: MAJOR, PENTATONIC MAJOR, MINOR, MELODIC MINOR, HARMONIC MINOR, PENTATONIC MINOR, CUSTOM DORIAN, CUSTOM BLUES.

MIDI Channel, Velocity Curve, le Panic Parameter:

• CHANEL DOWN, UP: E khetha mocha ofe oa MIDI o tla sebelisoa ho fetisetsa linotlolo, mekotla kapa litsamaiso.
• VELOCITY: E fetola lebelo la Velocity bakeng sa linotlolo kapa mekotla ho latela hore na ke taolo efe e qetileng ho hatelloa.
• TSHABO: E romella molaetsa oa "All Notes Off" liteisheneng tsohle tsa MIDI tse 16.
  Ho fihlella mesebetsi e meng, sheba software ea Preset Editor ho m-audio.com.

Mesebetsi e Bohareng

5. Hlahisa: Oxygen 61 e na le ponts'o ea LED ea linomoro tse 3 e fanang ka tlhaiso-leseling e bonts'ang mabapi le ts'ebetso ea hajoale, lenaneo le boemo ba taolo.
   Li-LED tsa matheba a mararo ho Display li tsamaellana le o mong oa mekhoa e 3 e fumanehang: ARP, ARP Latch, Smart Chord le Smart Scale.
   • ARP: LED e hotetse ha mofuta oa ARP o sebetsa.
     Leseli le khanya ha mokhoa oa ARP Latch o sebetsa.
   • KHAOLO: LED ea bonesoa ha mokhoa oa Smart Chord o sebetsa.
   • SCALE: LED e hotetse ha Smart Scale mode e sebetsa.
6. SHIFT: Tšoara konopo ea SHIFT ha u ntse u tsamaisa kapa u tobetsa litaelo kapa likonopo lebokoseng ho fihlella mesebetsi ea bona ea bobeli.
7. NAKO: Tlanya konopo ena ho seta tempo ea Oxygen 61. Tobetsa o tšoare konopo ena ebe o sebelisa likonopo tsa <le> ho etsa liphetoho tse eketsehileng ho tempo.
   SYNC: Tobetsa 'me u tšoare SHIFT le konopo ea TEMPO ho fihlella karolo ea SYNC, ho lumella keyboard hore e lumellane le melaetsa ea DAWs Time Clock (Tempo).
   Boemo ba tempo bo ama arpeggiator ea keyboard le mesebetsi ea ho pheta-pheta lintlha.
8. TLHOKOMELISO Pheta: Tobetsa konopo ena ho kenya tšebetsong mosebetsi oa ho pheta-pheta noto bakeng sa Pads.
   LATCH: Ho koalla mosebetsi o pheta-phetoang, ts'oara SHIFT ebe o tobetsa konopo ena.
   Ha Pheta-pheto e ntse e sebetsa ts'oara SHIFT ebe o tobetsa linotlolo tsa Time Division ho fetola maemo a hajoale a Time Division a Arpeggiator le Pad Note Repeat.
9. TLHOKOMELISO PHETA (LED): Leseli lena le tla bonesoa ka tieo ha Pheta-pheto ea Tsebiso e sebetsa.
10. <,>: Likonopo tsa <le> li tla khetha li-presets ha li le ho Preset mode.
    <MODE, MODE>: Ha SHIFT e ts'oaroa mme e 'ngoe ea likonopo tsena e hatelloa, mokhoa o sebetsang o tla fetoha (ARP, ARP Latch, Smart Chord, kapa Smart Scale).
    Ho bulela kapa ho tima mokhoa o sebetsang hajoale, tobetsa konopo tsa <le> ka nako e le ngoe. Bakeng sa example, haeba Smart Scale e sebetsa, ho tobetsa konopo tsa <le> ka nako e le ngoe ho tla etsa hore Smart Scale mode e sebetse ebe e khutlisetsa keybed ts'ebetsong ea eona e tloaelehileng.
    U ka tima mekhoa eohle ka ho tobetsa likonopo tsa <kapa> ho fihlela konopo ea Mode e sa bonesoe.
    Hlokomela: Ho ipapisitse le hore na keyboard e ntse e le ka har'a li-button li tla fetoha joang.
    Mokhoa oa DAW: Ka mokhoa oa DAW, <le> e tla phenya libanka tsa pina.
    Mokhoa oa Preset: Ka Mokhoa oa Preset, likonopo tsa <le> li tla phenya li-presets. Ho Edita Mode, li tla potoloha ka taolo e khethiloeng e ka fetoloang hajoale.
    Hlokomela Pheta: Ha Pheta-pheto ea Lintlha e ntse e sebetsa likonopo tsa <le> li tla phallela holimo le tlase ka har'a li-setting tsa nako.
11. DAW / PRESET: Ha konopo ena e petelitsoe, e tla kenya tšebetsong tšebetso ea keyboard ea Preset kapa DAW ho faders, knobs, button le pads.
    Ha mofuta oa DAW o sebetsa, li-control (li-Fader, li-button tsa Fader, <le>, lipads le likotola) li tla romella melaetsa ea Mackie, Mackie / HUI, kapa MIDI CC, ho latela hore na DAW e khethiloe.
    Ha mofuta oa Preset o sebetsa, khetho ea Preset e tla u bulela hore u sebelise likonopo tsa <le> ho khetha lenaneng la li-presets tsa Virtual Instrument.
    BOHLOKOA: Ho fetola seo DAW e se khethileng ha joale, tobetsa o hatelle konopo ea SHIFT le konopo ea DAW / PRESET.
    • NC1: Mackie 1 e tla romella melaetsa e tloaelehileng ea Mackie. Taolo ea Mackie e sebelisoa haholo bakeng sa li-DAW tse kang Cubase, Studio One, Logic le Reaper.
    • NC2: Mackie 2 e tla romella melaetsa e tloaelehileng ea Mackie, empa ka tharollo e phahameng bakeng sa lipitsa. Haeba pane ea hau ea DAW e sa khone ho fiela pitsa e felletseng, sebelisa Mackie 2. Taolo ea Mackie e sebelisoa haholo bakeng sa li-DAW tse kang Cubase, Studio One, Logic le Reaper.
    • M | h: Mackie / HUI e tla romella melaetsa e tloaelehileng ea Mackie / HUI bakeng sa li-DAW tse kang Pro Tools.
    • N1: MIDI 1 e tla romella sete e le 'ngoe ea melaetsa e tloaelehileng ea MIDI bakeng sa ts'ebeliso le Ableton.
    • N2: MIDI 2 e tla romella sete e le 'ngoe ea melaetsa e tloaelehileng ea MIDI e ka sebelisoang le MPC Beats, le Lebaka.
    • N3: MIDI 3 e tla romella sete e le 'ngoe ea melaetsa e tloaelehileng ea MIDI e ka sebelisoang le Ableton bakeng sa ho laola ho qalisoa ha clip, le likarolo tse ling tse tsoetseng pele.
12. DAW (LED): Leseli lena le tla bonesoa ka thata ha mofuta oa DAW o sebetsa.

Baetapele / Likonopo

13. Baetapele 1-9: E romela mefuta e fapaneng ea melaetsa e tloaelehileng ea MIDI CC kapa melaetsa e tsoetseng pele ea MIDI e ipapisitse le paramethara eo u e abetsoeng kapa sete e seng e entsoe.
    Mokhoa oa DAW: E romella melaetsa ea Fader channel bakeng sa Track Faders kapa lisebelisoa tse ling tsa DAW.
    Mokhoa o seng o setiloe: E romella melaetsa e seng e boletsoe esale pele kapa melaetsa e fetolehang ea MIDI CC.
14. Likonopo tsa Fader: Li-button tsena tse ka sebetsoang habonolo li ka abeloa ho romella Note, CC le melaetsa e meng ea MIDI.
    Mokhoa oa DAW: E romella melaetsa ea Mackie / HUI kapa melaetsa e boletsoeng esale pele ea CC bakeng sa Track Rec Arm, Track Select, Track Solo, le Track Mute.
    Mokhoa o seng o setiloe: E romella melaetsa e seng e boletsoe esale pele kapa melaetsa e fetolehang ea MIDI CC.
15. Mokhoa oa DAW BUTTON: Ha o le ka DAW mode le SHIFT mme konopo ena e petelitsoe, e tla fetola mekhoa ea likonopo tsa Fader lipakeng tsa Track Rec Arm, Track Select, Track Mute, kapa Track Solo.

Likotola / Tsamaiso ea Tsamaiso

16. Likotlo 1-8: E romela mefuta e fapaneng ea melaetsa e tloaelehileng ea MIDI CC kapa melaetsa e tsoetseng pele ea MIDI e ipapisitse le paramethara eo u e abetsoeng kapa sete e seng e entsoe. Konopo e ngoe le e ngoe e ka abeloa paramethara e fapaneng ea MIDI.
    Mokhoa oa DAW: E romella Mackie / HUI e boletsoeng esale pele, melaetsa ea Mackie kapa melaetsa e boletsoeng esale pele ea CC bakeng sa Track Panning, Sesebelisoa, kapa Litumello.
    Mokhoa oa ho seta esale pele: E romella melaetsa e fetolehang ea MIDI ka mokhoa o hlophisitsoeng pele ho 1-10.
17. (Loop): Tobetsa konopo ena ho kenya ts'ebetsong / ho tima ts'ebetso ea loop ho DAW ea hau.
18. (Ema): Tobetsa konopo ena ho emisa pina e bulehileng ho DAW ea hau.
    Tobetsa konopo habeli ho emisa pina ebe u khutlisetsa hlooho ea papali qalong ea pina.
19. (Bapala): Tobetsa konopo ena ho bapala pina ho DAW ea hau.
20. (Tlaleho): Tobetsa konopo ena ho kenya tšebetsong rekoto ho DAW ea hau.

Liphatlalatso

21. Mekhahlelo ea 1-8: Tobetsa mekotla ena e mamelang lebelo ho romela lintlha tsa Note On / Off le velocity ha u etsa.
    Tšoara PHATHISA ebe o tobetsa pad ho e fetola ho kenya ts'ebetso ea eona ea bobeli:
    PAD BANK 1 (Pad 1): Khetha banka ea pad bakeng sa mekotla eohle ea 1-8.
    PAD BANK 2 (Pad 2): Khetha banka ea pad bakeng sa mekotla eohle ea 1-8.
    TAOLE LEKHOTLA DAW
    Behantsha likotola tsohle 1-8 ho:
    PAN (Pad 6): Konopo ka 'ngoe e tla beha pina e tsamaellanang le software.
    DEVICE (Pad 7): Konopo e ngoe le e ngoe e tla laola taolo ea lisebelisoa tsa pina e tsamaellanang ea software.
    SENDS (Pad 8): Konopo e ngoe le e ngoe e tla laola boemo ba mohala o romellang pina e tsamaellanang ea software.
    Hlokomela: Ha se mesebetsi eohle ea kotola e tla fumaneha DAW e ngoe le e ngoe.

Panele e ka morao

1. USB: Boema-kepe ba USB 2.0 bo fana ka matla lebokoseng mme bo fetisetsa data ea MIDI ha e hokeloa khomphuteng.
2. TLHOKOMELISO: Kakanyo ena e amohela leoto la maoto la ho ikopanya le motsotsoana (ha le kenyelelitsoe). Ha o tobetsa, pedal ena e tla boloka molumo oo u o bapalang ntle le ho boloka menoana ea hau e tobetsa linotlolo.
   Hlokomela: Polarity ea pedal e tsitsitseng e khethoa ke keyboard ha e qala. Ha khiboto ea Oxygen 61 e ntse e phahama, ho nahanoa hore pedal e ts'oarellang e maemong a "holimo" (Off). Ho bohlokoa hore pedal e sa hatelloe nakong ea ho qala, ho seng joalo pedal e tla khutlisa tšebetso ea eona, 'me lintlha li tla ts'ehetsa ha pedal e sa hatelloa.
3. MATLA ON / TSOANG: Sebelisa sesebelisoa sena ho tima kapa ho tima sesebelisoa. Ha sesebelisoa sena se behiloe boemong ba "on", Oxygen 61 e sebelisoa ka khokelo ea USB khomphuteng ea hau.
4. Kensington Lock: Sehokedi sena se tsamaellana le likhoele tsa ts'ireletso tsa Kensington tse tloaelehileng bakeng sa ts'ireletso ea bosholu.

Tshebetso

Khaolo ena e hlalosa likarolo tsa keyboard ea hau ea Oxygen Series.

Likhopolo tsa mantlha tsa Oxygen Series

Karolo ena e fana ka pheletsoview ea likhopolo tse ling tsa mantlha tse tla u thusa ho utloisisa le ho sebelisa keyboard ea hau ea Oxygen series.
Keyboard
Octave le Transposition
Taolo ea Tempo
Hlokomela Pheta / Latch Button
Li-Presets
DAW le Mokhoa oa Preset
PHATHISA
Likonopo tsa <le>
Taolo ea ARP le Latch
Taolo ea Smart Chord
Smart Scale Control
Mokhoa oa Button oa DAW
Taolo ea DAW Knob
Khetho ea Channel
Lebelo la Velocity
Tshabo
Hlahisa Fektheri bocha
Karolo ka 'ngoe e na le lihokela tsa likarolo tse ling tsa tataiso ena, eo re khothalletsang ho e bala.

Keyboard

Khiboto e na le mamello ea lebelo ka morao ka morao mme e ka fihlella mefuta e felletseng ea lintlha tsa 127 tse fumanehang tsa MIDI ka li octave tse 10.
Ho tobetsa SHIFT le se seng sa linotlolo tse ngotsoeng ho u lumella ho potlakela ho hlophisa Smart Chord, Smart Scale, Arpeggiator, Channel le Velocity.

Octave le Transposition

Ka ho sebelisa likonopo tsa Key Octave - / +, line e ka fihlella mefuta e felletseng ea lintlha tse 127 tse fumanehang tsa MIDI (li octave tse 10). Ntle le moo, o ka fetisetsa line ho fihla ho semitone tse 12 (octave e le 'ngoe) ka lehlakoreng le leng.
Ho fetola octave ea keyboard, sebelisa konopo ea Key Octave - / + ho theola kapa ho phahamisa octave ka ho latellana. Pontšo e tla bonts'a OCT ka nakoana le phetoho ea hajoale ea octave.

Khiboto ea Oxygen 25 e ka suthisoa ka tlase ho 4 octave kapa 5 octave up.
Khiboto ea Oxygen 49 e ka suthisoa ka tlase ho 3 octave kapa 4 octave up.
Khiboto ea Oxygen 61 e ka suthisoa ka tlase ho 3 octave kapa 3 octave up.

Ho fetola phetoho ea keyboardTobetsa o hatelle Shift, ebe o sebelisa likonopo tsa Key Octave - / + ho theola kapa ho phahamisa senotlolo ka ho le leng. Pontšo e tla bonts'a phetoho ea hajoale (-12 ho isa ho 12).

Taolo ea Tempo

Ho hlophisa konopo ea Tempo, tobetsa konopo ea Tempo. U ka tlanya konopo ea TEMPO khafetsa ho kena ka tempo, kapa tobetsa ebe u tšoara konopo ea TEMPO ebe u sebelisa likonopo tsa <le> ho tsamaela ho tempo eo u e batlang.
SYNC: Ho tobetsa konopo ea Shift le konopo ea Tempo ho khetha hore na tempo e romelloa ho tsoa kahare ea khiboto kapa e lumellane le DAW e kantle.
Litekanyetso tse fumanehang: Kahare, kantle
BPM ###.: 20.00 - 240.00
Tlhokomeliso: Melaetsa ea lioache e romelloa le ho amoheloa ho Oxygen Port 1 (Oxygen ## / USB MIDI).

Hlokomela Pheta / Latch Button

Ha konopo ena e petelitsoe ebile e ts'oeroe e tla kenya tšebetsong ts'ebetso ea Pad's Note Repeat / Roll.
Haeba SHIFT le konopo ena li petelitsoe hammoho, seo se tla etsa hore karolo ea Latch e pheta konopo.
Ha Pheta-pheto ea Lintlha e ntse e sebetsa, ho Preset Mode likonopo tsa <le> li ka sebelisoa ho fetola maemo a hajoale a Time Division a Arpeggiator le Pad Note Repeat. Litlhophiso tsa Time Division le tsona li ka fetoloa ha ARP e sebetsa ka ho tobetsa le ho ts'oara Button ea SHIFT le ho tobetsa linotlolo tse ngotsoeng ka li-setting tsa Time Division.

• 1/4
• 1/4T
• 1/8
• 1/8T
• 1/16
• 1/16T
• 1/32
• 1/32T

Li-Presets

Ho seta esale pele ke pokello e bolokiloeng ea likabelo bakeng sa taolo ea Oxygen, li-setting tsa seteishene, li-setting tsa libaka tsa keyboard, joalo-joalo. sesebelisoa, kapa morero / thuto.
Re khothaletsa ho ngolisa Oxygen ea hau ho m-audio.com le ho jarolla Oxygen Series Software Manager.
Ho Software Manager o tla khona ho fumana software eohle ea hau e kenyelelitsoeng hammoho le Oksijene Preset Editor. Mohlophisi oa Preset o u fa pono le tlhaiso-leseling e ntle ea ho hlophisa melaetsa e fapaneng eo lits'oants'o tsa Oxygen li e romellang khomphuteng ea hau ntle le ho sebelisa sebopeho sa "Hardware". Sesebelisoa sa Preset se u nolofalletsa ho boloka le ho jarisa li-presets tse tloahelehileng tse tsoang komporong ea hau.
Ho khetha sete e seng e setiloe esale pele ho Oxygen, tobetsa konopo ea DAW / PRESET ho kenya khiboto ho Preset Mode (konopo ea DAW e sa bonesoa), ebe o sebelisa li-Buttons tsa <le> ho khetha setlhophiso seo u se batlang.
Ho khetha seteishene sa DAW ho oksijene, tobetsa 'me u tšoare konopo ea DAW / PRESET ha u le mochining oa DAW (konopo ea DAW e hotetse),' me u sebelise li- Buttons ho khetha seo u se batlang pele ho DAW.

DAW le Mokhoa oa Preset

Hang ha o se o kentse keyboard ea hau ea Oxygen ho sebetsa le DAW ea hau, ke nako ea ho seta mokhoa oa ts'ebetso oa keyboard, Preset kapa DAW. Ka ho khetha Mokhoa oa ts'ebetso, o ka chencha kapele ho Oxygen e laolang taolo ea DAW ea hau ha mofuta oa DAW o sebetsa ho laola synth / Virtual Instrument ha mokhoa oa Preset o sebetsa.
Mekhoa ena e 'meli ea ts'ebetso e khetholla tšebetso ea taolo e ka fetoloang ea keyboard ea MIDI:

• DAW: Ka Mokhoa oa DAW, li-control tsa keyboard li tla etsoa 'mapeng oa li-fade, likonopo, likonopo,' me maemong a mang liphahlo ho DAW ea hau.
  • NC1: Mackie 1: E tla romella melaetsa e tloaelehileng ea Mackie. Taolo ea Mackie e sebelisoa haholo bakeng sa li-DAW tse kang Cubase, Studio One le Reaper.
  • NC2: Mackie 2. E tla romella melaetsa e tloaelehileng ea Mackie, empa ka tharollo e phahameng bakeng sa lipitsa. Haeba pane ea hau ea DAW e sa khone ho fiela pitsa ea pan ka botlalo, sebelisa Mackie 2. Taolo ea Mackie hangata e sebelisoa bakeng sa li-DAW tse kang Cubase, Studio One le Reaper.
  • M | h: Mackie / HUI e tla romella melaetsa e tloaelehileng ea Mackie / HUI bakeng sa li-DAW tse kang Pro Tools le Logic.
  • N1: MIDI 1 e tla romella sete e le 'ngoe ea melaetsa e tloaelehileng ea MIDI bakeng sa ts'ebeliso le Ableton.
  • N2: MIDI 2 e tla romella sete e le 'ngoe ea melaetsa e tloaelehileng ea MIDI e ka sebelisoang le MPC Beats, le Lebaka.
  • N3: MIDI 3 e tla romella sete e le 'ngoe ea melaetsa e tloaelehileng ea MIDI e ka sebelisoang le Ableton bakeng sa ho laola ho qalisoa ha clip, le likarolo tse ling tse tsoetseng pele.
• Seta pele: Ka Mokhoa oa Preset, li-control tsa keyboard li tla etsoa 'mapa ho li-fading, li-button, likonopo le lipads ho sesebelisoa sa hau sa Virtual. Litaolo tse ka fetoloang tsa keyboard li ka seteloa mesebetsi eo u iqapelang eona. Limmapa tse latelang tse hlophisitsoeng esale pele li ka hlophisoa ka ho sebelisa Oksijene Preset Editor ebe li bolokoa mohopolong o ka hare oa khiboto hore o tle o li jarise hamorao.
  • MPC PI
  • Hybrid 2
  • Mini Grand
  • Velvet
  • 2
  • Phula
  • BOMONA
  • DB33
  • Kakaretso MIDI
  • Kakaretso MIDI

Ho beha keyboard hore e sebetse ka Mokhoa oa DAW, tobetsa konopo ea DAW / Preset hore konopo ea DAW e bonesoe.
Ho fetola lebokose la DAW le hlophisitsoeng hore le laole:
Ha o ntse o le mokgweng wa DAW, tobetsa o tshware konopo ya DAW / Preset ebe o sebedisa <le> Buttons ho kgetha DAW ya hao.
Boholo ba li-DAW li tla amohela li-keyboard tsa Oxygen, ebe li hlophisa taolo ea hau ea oksijene joalo ka taolo ea DAW, le molaoli oa lisebelisoa tsa mofuta oa Preset.
Haeba DAW ea hau e sa iketsetse li-keyboard tsa Oxygen, ka kopo latela mehato ea ho seta e thathamisitsoeng ho Oxygen DAW Setup Guides.
Ho beha keyboard hore e sebetse ka Preset Mode, tobetsa konopo ea DAW / Preset hore konopo ea DAW e se ke ea bonesoa.
Ho fetola likhetho tse seng li khethiloe hona joale:
Ho khetha sete e seng e setiloe esale pele ho Oxygen, tobetsa konopo ea DAW / PRESET ho kenya khiboto ho Preset Mode (konopo ea DAW e sa bonesoa), ebe o sebelisa li-Buttons tsa <le> ho khetha setlhophiso seo u se batlang.
Ho na le li-Presets bakeng sa Lisebelisoa tsohle tsa Virtual tse kenyellelitsoeng le Oxygen ea hau. Bakeng sa Lisebelisoa tsa Virtual tse sa kenyellelitsoeng le Oxygen ea hau, re khothaletsa ho sebelisa MPC Beats e le sephutheloana sa polokelo ho DAW eo u e ratang, le MPC PI ea Oxygen. MPC Beats e buloa e le sekoaelo sa plugin ho li-DAW tsohle tse tloaelehileng ho kopanya tse ntlehali ho feta lefats'e lohle la DAW. Sena se u fa bolokolohi ba ho sebelisa MPC Beats e le sesebelisoa sa polasetiki se bonolo sa synth / Virtual Instrument, se u nolofalletsang ho ba le lits'oants'o tsohle tsa oksijene tse ipapisitseng le 'mapa oa hau o bonolo oa synth / Virtual Instrument plugin.
Ho jarolla software e kenyellelitsoeng ea MPC Beats, latela litaelo tse fumanehang kareteng ea download software.

KONOLO SHIFT

Ha konopo ena e petelitsoe ebile e ts'oeroe e tla u nolofalletsa ho khetha SHIFT liphetoho tsa khiboto.

Likonopo tsa <le>

Ha ho mekhoa efe kapa efe ea keyboard e fumanehang, likonopo tsena li sebelisetsoa ho phenya likhetho. Ha o le Mokhoa oa DAW Encoder ena e tla romella melaetsa e arohaneng ea Holimo / Tlase kapa ea Leqeleng / Le letona (ho latela DAW, Selection ea DAW, hape ho latela hore na Shift le likonopo tsena li petelitsoe). Ka mokhoa oa ho seta esale pele likonopo tsena li tla phenya li-presets tse fumanehang.
Haeba mokhoa oa ho pheta-pheta lintlha o sebetsa, likonopo tsena li tla sebelisoa ho khetha maemo a karohano ea nako.
Haeba Tempo e hatelloa ebile e ts'oaroe, likonopo tsena li tla sebelisoa ho fetola Tempo ea kahare.
Ha SHIFT le likonopo tsena li petelitsoe, li tla feta ka mekhoa e fumanehang, ARP, ARP Latch, Smart Chord, kapa Smart Scale.
Ha likonopo tsena li petelitsoe hammoho ka nako e le 'ngoe, li tla etsa hore mokhoa oa hona joale o sebetse.

Taolo ea ARP le ARP LATCH

Ho oksijene, ha SHIFT le konopo ea <kapa> e petelitsoe, e tla u nolofalletsa ho khetha le ho kenya tšebetsong arpeggiator ea kahare ea keyboard. Ha ARP e sebetsa, LED ea ARP e tla bonesoa. Sekhahla sa arpeggiator se ipapisitse le maemo a hajoale a Tempo le Time Division - Litlhophiso tsa Tempo lia hlophiseha ho sebelisoa konopo ea Tempo. Litlhophiso tsa karohano ea nako li ka fumaneha ka ho tobetsa le ho ts'oara konopo ea "Repeat" ebe o tobetsa konopo tsa <kapa>.
Ho kenya tshebetsong tshebetso ya ARP Latch, tobetsa o tshware SHIFT le konopo ya <kapa> ho fihlela LED ya ARP e bonesa.
Sekhahla sa arpeggiator se ipapisitse le maemo a hajoale a Tempo le Time Division - Litlhophiso tsa Tempo li ka hlophisoa ka ho sebelisa konopo ea Tempo, ka ho e tlanya, kapa ho tobetsa le ho ts'oara konopo ea Tempo ebe o tobetsa likonopo tsa <kapa>. Litlhophiso tsa karohano ea nako li ka fumaneha ka ho tobetsa le ho ts'oara konopo ea "Repeat" ebe o tobetsa "kapa" ka ho tobetsa konopo ea Shift le linotlolo life kapa life tsa karohano ea nako (1/4, 1 / 4T, 1/8, 1 / 8T, 1 / 16, 1 / 16T, 1/32, 1 / 32T).
O ka bulela le ho tima ARP ka ho tobetsa likonopo ka bobeli le <ka nako e le 'ngoe.

Mokhoa oa Arp

Mofuta:

• Holimo: Lintlha li tla utloahala ho tloha tlase ho ea holimo.
• Tlase: Lintlha li tla utloahala ho tloha holimo ho ea tlase.
• Kenyelletso (Incl): Lintlha li tla utloahala ho tloha tlase ho ea holimo, ebe li khutlela tlase. Lintlha tse tlaase le tse phahameng ka ho fetisisa li tla utloahala habeli ha li fetola tsela.
• Exclusive (Excl): Lintlha li tla utloahala ho tloha tlase ho ea holimo, ebe li khutlela tlase. Lintlha tse tlaase ka ho fetisisa le tse phahameng ka ho fetisisa li tla utloahala hanngoe feela ha li fetola tsela.
• Order: Lintlha li tla utloahala ka tatellano eo li hatelletsoeng ka eona.
• Random: Lintlha li tla utloahala ka tatellano.
• Chord: Lintlha tsohle tsa morethetho li tla utloahala hammoho khafetsa.

Keiti: E lekanya hore na dintlha tsa babuelli di tla ba le bolelele bo bokae. Heke e khutsufatsa, noto e khutsufatsa.

• Bohlokoa: 5% - 100%

Ballon: E etsa qeto ea hore na litlatsetso tsa bahloekisi li tla ba le tempo e kae.

• 50%: Ha ho Swing
• 55%: 55% e sesa
• 57%: 57% e sesa
• 59%: 59% e sesa
• 61%: 61% e sesa
• 64%: 64% e sesa
• 66%: 64% e sesa
• 75%: 75% e sesa

Octave: E khetholla arpeggiators octave range.

• 0: Ha ho li-octave
• 1:1 octave
• 2: 2 octave

Lisebelisoa tsa LED

Mekhahlelo	LED
Tlanya - Holimo	Up
Tlanya - Tlase	dn
Mofuta - Incl	inc
Mofuta - Excl	Mohl
Mofuta - Order	taelo
Mofuta - Random	pota-potileng
Mofuta - Chord	crd
Heke - 0	0
Heke - 10	10
Heke - 20	20
Heke - 30	30
Heke - 40	40
Heke - 50	50
Heke - 60	60
Heke - 70	70
Heke - 80	80
Heke - 90	90
Heke - 100	100
Ho tsubella - 50	50
Ho tsubella - 55	55
Ho tsubella - 57	57
Ho tsubella - 59	59
Ho tsubella - 61	61
Ho tsubella - 64	64
Ho tsubella - 66	66
Ho tsubella - 75	75
Octave - 0	0
Octave - 1	1
Octave - 2	2

Taolo ea Smart Chord

Ho Oxygen, ha SHIFT le konopo ea <kapa> e petelitsoe, e tla u nolofalletsa ho khetha le ho kenya tšebetsong Mokhoa o ka hare oa Smart Chord Mode. Ha Smart Chord e sebetsa, Chord LED e tla bonesoa. Litlhophiso tsa Smart Chord li ipapisitse le maemo a hona joale a Key, Voicing, le Type. Lisebelisoa tsa Key, Voicing, le Type li ka hlophisoa ha mokhoa oa Smart Chord o sebetsa ebile o sebelisa konopo ea SHIFT ebe o tobetsa e 'ngoe ea linotlolo tsa Key, Voicing, kapa Type.
Ha mokgwa wa Smart Chord o sebetsa, tobetsa konopo e le 'ngoe e tla bapala morethetho joalokaha o khethiloe likhethong tsa hajoale tsa Smart Chord Edit. Ts'ebetso ena e fumaneha ka mekhoa ea li-keyboard tsa 2, DAW, PRESET.
O ka bulela le ho tima Mokhoa oa Smart Chord ka ho tobetsa likonopo ka bobeli le <ka nako e le 'ngoe.

• Mokhoa oa Smart: Ka Mokhoa ona, o tla qala ka ho beha line ho konopo ea mmino (mohlala, D e nyane). Ebe o fana ka mantsoe a lakatsehang bakeng sa likhetho (ke linako life tse tla kenyelletsoa ho chord, mohlala, 1-3-5). Mantsoe a senotlolo se seng le se seng ka nako eo a tla ntlafatsoa ka kotloloho ho konopo e khethiloeng.
• Tloaelo: Ka Mokhoa ona, o ka tseba sebopeho sa chord se tla abeloa konopo ka 'ngoe ka ho e bapala ka letsoho. Bakeng sa examphaeba u tšoere Shift ebe u tobetsa konopo ea Tloaelo, ponts'o ea LED e tla bontša "C5t". Ha "C5t" e bonts'oa pontshong ea LED, konopo ea Shift e ka lokolloa 'me o ka tobetsa ho fihlela linotlolo tse 6 ka nako e le ngoe ho kena ka morethetho oa tloaelo, bakeng sa exampLe 1-b3-5-b7 chord, senotlolo se seng le se seng se tla abeloa ho bapala sebopeho sena sa mmino. Noutu ea senotlolo seo u se hatisang e tla sebetsa e le motso oa chord.

Silkere	LED
Senotlolo - C	C
Senotlolo - Db	dB
Senotlolo - D	D
Senotlolo - Eb	Eb
Senotlolo - E	E
Senotlolo - F	F
Senotlolo - Gb	Gb
Senotlolo - G	G
Senotlolo - Ab	Ab
Senotlolo - A	A
Senotlolo - Bb	Bb
Senotlolo - B	B
Ho bua - 1,3,5	135
Ho bua - 1,3,7	137
Ho bua - 1,3,5,7	135
Ho bua - 1,5,9	159
Ho bua - 1,5,12	150
Ho bua - 3,5,1	351
Ho bua - 5,1,3	513
Ho bua - ka nako e telele	Rnd
Mofuta - Major	1
Mofuta - Nyane	2
Mofuta - Tloaelo	C5t

Smart Scale Control

Ho Oxygen, ha SHIFT le konopo ea <kapa> e petelitsoe, e tla u nolofalletsa ho khetha le ho kenya tšebetsong Mokhoa o ka hare oa Smart Scale Mode. Ha Smart Scale e sebetsa, Scale LED e tla bonesoa. Litlhophiso tsa Smart Scale li ipapisitse le maemo a hona joale a Key le Type. Lisebelisoa tsa Key, le Type lia hlophiseha ha mokhoa oa Smart Scale o sebetsa ebile o sebelisa konopo ea SHIFT ebe o tobetsa konopo e le 'ngoe, kapa Type.
Ts'ebetso ea Smart Scale e tla sebetsa feela lintlheng tse bapaloang khiboto. Ha Smart Scale Mode e sebetsa, linotlolo li tla bapala lintlha feela ka senotlolo sa senotlolo sa hona joale ebe o thaepa khetho. Ts'ebetso ena e fumaneha ka mekhoa ea li-keyboard tsa 2, DAW, PRESET.
O ka bulela le ho tima Mokhoa oa Smart Scale ka ho tobetsa likonopo ka bobeli le <ka nako e le 'ngoe.
Senotlolo: C, Db, D, Eb, E, F, Gb, G, Ab, A, Bb, B.
Mofuta: Major, Pentatonic Major, Minor, Melodic Minor, Harmonic Minor, Pentatonic Minor, Custom - Dorian, Custom - Blues.

Silkere	LED
Senotlolo - C	C
Senotlolo - Db	dB
Senotlolo - D	D
Senotlolo - Eb	Eb
Senotlolo - E	E
Senotlolo - F	F
Senotlolo - Gb	Gb
Senotlolo - G	G
Senotlolo - Ab	Ab
Senotlolo - A	A
Senotlolo - Bb	Bb
Senotlolo - B	B
Ho bua - 1,3,5	135
Ho bua - 1,3,7	137
Ho bua - 1,3,5,7	135
Ho bua - 1,5,9	159
Ho bua - 1,5,12	150
Ho bua - 3,5,1	351
Ho bua - 5,1,3	513
Ho bua - ka nako e telele	Rnd
Mofuta - Major	1
Mofuta - Nyane	2
Mofuta - Tloaelo	C5t

Mokhoa oa Button oa DAW

Ho senotlolo sa 49- le 61, ha konopo ea Shift le konopo ena li petelitsoe, e tla fetola maemo a hajoale a li-fader mode ho DAW mode. Likhetho tsa mode tsa DAW Button ke track Record (Record letsoho), Select, Mute, le Solo.

Mokhoa oa DAW

• Rec: Li-Buttons tsa Fader li tla kenya melaetsa ea Record Arm MIDI, Mackie, kapa Mackie / HUI bakeng sa mocha oa hona joale oa konopo ho DAW ea hau.
• Khetha: Li-Buttons tsa Fader li tla kenya tšebetsong Track Select MIDI, Mackie, kapa Mackie / HUI melaetsa bakeng sa mocha oa hona joale oa konopo ho DAW ea hau.
• Khutsa: Li-Button tsa Fader li tla etsa hore melaetsa ea Mute ea MIDI, Mackie, kapa Mackie / HUI e sebetse bakeng sa mocha oa hona joale oa konopo ho DAW ea hau.
• Solo: Li-Button tsa Fader li tla kenya melaetsa ea Solo MIDI, Mackie, kapa Mackie / HUI bakeng sa mocha oa hona joale oa konopo ho DAW ea hau.

Taolo ea DAW Knob

Ho sebelisa konopo ea SHIFT le Pads 9-12 (ho senotlolo sa 25), kapa 9-11 (ho senotlolo sa 49 le senotlolo sa 61) ho tla u nolofalletsa ho fetola ts'ebetso ea likotola ka mokhoa oa DAW.

Mokhoa oa DAW

• Buka: E tla fetola likotola ho laola li-fader tsa DAW ea hau.
• Pan: E tla fetola tšebetso ea likotola ho laola likotopo tsa pan ea DAW ea hau.
• Sesebelisoa: E tla fetola tšebetso ea likotola ho laola taolo ea li-plugins tse khethiloeng hajoale ho DAW ea hau.
  Tlhokomeliso: Ha se li-DAW tsohle tse tšehetsang taolo ea Sesebelisoa.
• E romella: E tla fetola tšebetso ea likotola ho laola lits'oants'o tse romelloang tsa kanale ho DAW ea hau.
  Tlhokomeliso: Ha se tšehetso eohle ea li-DAW e romellang taolo.

Khetho ea Channel

Sena se khetha kanale ea MIDI e tla sebelisoa ho romella melaetsa ea MIDI ho tsoa linotlolo, mekotla, likotola, lifela le likonopo.
Taolo ea ho qetela e khethiloeng e tla ba eona e khethiloeng bakeng sa ho e hlophisa. Bakeng sa example, haeba linotlolo li petelitsoe pele ho tobetsa Shift Button le konopo ea Channel li petelitsoe, mocha oa keybed o tla khethoa hore o hlophisoe.

Boleng	LED
G, 1-16	G1o, 1-16

Lebelo la Velocity

Velocity Curve e khetha leqhubu la lebelo leo khiboto kapa li-pum pads li tla li sebelisa bakeng sa mongolo o mong le o mong oa MIDI. Ho na le li-setup tsa 4 velocity curve tse fapaneng, le li-dettings tse 3 tse sa fetoheng. Litlhophiso tsa 4 velocity curve li tlase, li Medium, High ebile li Linear. Litlhophiso tsa 3 tsa velocity tse tsitsitseng li fana ka velocities tsa 64, 100 le 127 ka ho latellana.
Taolo ea ho qetela e khethiloeng e tla ba eona e khethiloeng bakeng sa ho e hlophisa. Bakeng sa example, haeba linotlolo li hatisoa pele ho tobetsa konopo ea Shift le konopo ea Velocity, ho tla khethoa velocity curve ea keybed hore e hlophisoe.
Haeba mosebetsi oa Velocity Curve o khethiloe bakeng sa mekotla ea meropa, mekotla eohle ea meropa e tla qala ho benya ho bontša hore Velocity ea bona e ntse e hlophisoa.
Ha li-Velocity Curves li khethoa, Pontšo ea LED e tla bonts'a lekhalo ka sebopeho se thathamisitsoeng kaholimo.
Performance Mode e tla qala hape kamora metsotsoana e 2 ea boleng bo khethiloeng.

Boleng	LED
Tlase	Lo
Mahareng	Med
Phahameng	Hi
Linear	Lina
64	64
100	100
127	127

Tshabo

Tobetsa konopo ya Panic kapa Shift le konopo ya Stop (ho konopo ya 25) ho romela molaetsa wa “All Notes Off” ho dikanale tsohle tse 16 tsa MIDI. Sena se emisa lintlha life kapa life tse tsoelang pele ho bapala le kamora hore linotlolo tsa bona li lokolloe.

Hlahisa Fektheri bocha

Litlhophiso tsa fektheri tsa kamehla li ka khutlisoa ka ho ts'oara likonopo tsa Octave - le + nakong ea matla. Hona joale lintlha tsohle tse bolokiloeng pejana li tla hlakoloa.

Litlhaloso tsa Tekheniki

Oksijene 25

Matla	E tsamaisoa ke bese ea USB
Litekanyo (Bophara x Botebo x Bophahamo)	19.3″ x 9.6″ x 3.7″ 492 mm x 243 mm x 94 mm
Boima ba 'mele	4 lik'hilograma 1.8 lik'hilograma

Oksijene 49

Matla	E tsamaisoa ke bese ea USB
Litekanyo (Bophara x Bolelele x Bophahamo)	32″ x 9.6″ x 3.7″ 814 mm x 243 mm x 94 mm
Boima ba 'mele	6.4 lik'hilograma 2.9 lik'hilograma

 Oksijene 61

Matla	E tsamaisoa ke bese ea USB
Litekanyo (Bophara x Botebo x Bophahamo)	38.5″ x 9.6″ x 3.7″ 977 mm x 243 mm x 94 mm
Boima ba 'mele	7.5 lik'hilograma 3.4 lik'hilograma

Litokomane / Lisebelisoa

M-Audio OXYGEN25 USB Keyboard le Pad MIDI Controller [pdf] Bukana ea Mosebelisi Khiboto ea USB le Pad MIDI Controller, OXYGEN25, OXYGEN49, OXYGEN61

Litšupiso

• Bukana ea Mosebelisi