EX2 LED Touch Controller
Buka ea Tataiso
www.ltech-led.com
Setšoantšo sa tsamaiso
Likarolo tsa sehlahisoa
- Amohela waelese RF le ka megala DMX512 melaoana 2 ka mokgwa wa 1 taolo, ho tenyetseha haholoanyane le loketseng bakeng sa tlhomamiso porojeke.
- Theknoloji e tsoetseng pele ea RF ea sync / zone ea taolo e tsoetseng pele, etsa bonnete ba hore mekhoa e metle ea mmala ka tsela e lumellanang har'a bakhanni ba bangata.
- Kenya touch panel libakeng tse fapaneng, e ka laola leseli le tšoanang la LED, ea fihlella taolo ea liphanele tse ngata, ha ho na palo e lekantsoeng.
- Tšoara linotlolo ka chord le pontshi ea LED.
- Ho amohela tekhenoloji ea capacitive touch control ho etsa hore khetho ea dimming ea LED e be bonolo ho basebelisi.
- E tsamaisana le taolo e hole le ea APP ka ho eketsa heke ea LTECH.
Lintlha tsa tekheniki
| Mohlala | EX1S | Ke EX2 | EX4S |
| Mofuta oa taolo | Dimming li | CT | RGBW |
| Keletso voltage | 100-240Vac | ||
| Letshwao la tlhahiso | DMX512 | ||
| Mofuta o se nang mohala | RF 2.4GHz | ||
| Mocheso o sebetsang. | -20°C-55°C | ||
| Litekanyo | L86xW86xH36Imml | ||
| Boholo ba sephutheloana | L113xW112xHSOImml | ||
| Boima (GW) | 225g | ||
Sehlahisoa ka
logo e tšehetsa mosebetsi oa WIFI-108 mode e tsoetseng pele.
Mesebetsi ea bohlokoa
- Ha lebone le leputsoa la pontshi la
senotlolo se butswe, tobetsa nako e telele ho bulela/ho tima seboko. Ha lebone le lesoeu la pontšo ea senotlolo e butswe, tobetsa nako e telele ho tsamaisana le khoutu. - Linotlolo tsa boemo ba sebaka sa EX li tsamaisana le litšoantšo tsa heke tsa APP, liketsahalo li ka fetoloa ke APP kapa phanele.
Mokhoa
| 1 E khubelu e tsitsitseng | 7 E tšoeu e tsitsitseng |
| 2 Botala bo tsitsitseng | 8 RGB qhoma |
| 3 Boputsoa bo tsitsitseng | 9 7 Mebala e tlolakang |
| 4 Bosehla bo tsitsitseng | 10 RGB mmala o boreleli |
| 5 pherese e tsitsitseng | 11 Ka mebala e felletseng e boreleli |
| 6 cyan e tsitsitseng | 12 Static black (e haufi feela RGB) |
- Leseli le lesoeu feela: tobetsa
senotlolo sa ho khetha mokhoa o motšo, ebe o tobetsa konopo.
Boholo ba sehlahisoa
Yuniti: mm
Litheminale
Taelo ea ho kenya
Ho latellana ha khoutu ea papali
Wiring ea sistimi ea DMX
- Lokisa heke ka phanele, e nolofalletsang mohala o bohlale ho laola lisebelisoa tsa DMX ka heke.
- Lokisa remote ka phanele, e nolofalletsang remote ho laola lisebelisoa tsa DMX.
Wiring ea sistimi e se nang mohala
- Kopanya mokhanni oa waelese le heke.
- Karolo ea papali le heke.
- Bapisa remote le phanele, bapisa remoutu le mokhanni oa waelese.
Sebopeho sa kopo
taolo ea DMX512
Taolo e se nang mohala
Wiring ea DMX
Wiring e se nang mohala ea RF
Ho qoba tšitiso ea lets'oao, ho hlongoa ho hloka ho lula hole le sebaka se seholo sa tšepe kapa sebaka sa thepa ea tšepe.
Mehala ea taolo ea li-panel tse ngata
- Ka mor'a touch panel A hlokomela ho laola lamps, haeba B le C li bapisoa le A, li ka laola le lamps.
- Taolo ea khokahano e fumaneha hape ha o hokahana le li-decoder tsa DMX.
Khoutu ea papali lipakeng tsa liphanele tse amang
Khoutu ea papali pakeng tsa phanele ea ho thetsa le hole
- Tobetsa nako e telele holim'a "touch panel" ho fihlela mabone ohle a panya.
- Bapisa le F series hole:
Tobetsa konopo ea On / Off ea nako e telele ho F series Remote, leseli la ponts'o ea seteishene sa ho emisa se emisa, ts'oana ka katleho.
EX1S e sebetsa le F1 e hole.
EX2 e sebetsa le F2 e hole.
EX4S e sebetsa le F4 e hole.
Bapisa le Q hole hole:
Tobetsa nako e telele konopo ea "On" ea libaka tse tsamaellanang ho Q series remoutu, lebone la sesupo sa "touch panel" le emise ho penya, le bapisa ka katleho.
EX1S e sebetsa le Q1 e hole.
EX2 e sebetsa le Q2 e hole.
EX4S e sebetsa le Q4 e hole.
Khoutu ea papali pakeng tsa phanele ea ho thetsa le mokhanni ea se nang mohala
Liphanele tse amang maikutlo li ka sebetsa le mokhanni ea se nang mohala F4-3A / F4-5A / F4-DMX-5A / F5-DMX-4A.
Mokhoa oa 1:
Mokhoa oa 2:
Ka kopo, bapisa/hlakola khoutu neng lebone la phanele le lesoeu.
Khoutu ea papali pakeng tsa phanele ea ho thetsa le heke
Hlakola khoutu
Tobetsa konopo e ka tlase e 'meli ho phanele ea ho ts'oara ka nako e le' ngoe bakeng sa 6s, mabone a ponts'o a panya makhetlo a 'maloa, hlakisa khoutu ka katleho.
Ka kopo, bapisa/hlakola khoutu neng lebone la phanele le lesoeu.
Tumellano ea tiisetso
- Re fana ka thuso ea mahlale a bophelo bohle ka sehlahisoa sena:
• Tiisetso ea lilemo tse 5 e fanoa ho tloha ka letsatsi la theko. Tiisetso ke ea ho lokisoa kapa ho nkeloa sebaka mahala haeba ho na le liphoso tsa ho etsa thepa feela.
• Bakeng sa liphoso tse fetang tiisetso ea lilemo tse 5, re na le tokelo ea ho lefisa nako le likarolo. - Likhetho tsa Warranty ka tlase:
• Tšenyo efe kapa efe e entsoeng ke motho e bakoang ke ts'ebetso e sa nepahalang, kapa ho hokela ho matla a feteletsengtage le overloading.
• Sehlahisoa se bonahala se e-na le tšenyo e feteletseng ea 'mele.
• Tšenyo e bakoang ke likoluoa tsa tlhaho le force majeure.
• Leibole ea tiisetso, leibole e senyehang habonolo le leibole e ikhethang ea barcode li senyehile.
• Sehlahisoa se nketsoe sebaka ke sehlahisoa se secha. - Ho lokisa kapa ho chencha joalo ka ha ho fanoe ka tiisetso ena ke pheko e khethehileng ho moreki. LTECH e ke ke ea ikarabella bakeng sa tšenyo efe kapa efe ea tšohanyetso kapa ea litlamorao bakeng sa ho tlola taelo efe kapa efe ea tiisetso ena.
- Phetoho efe kapa efe kapa phetoho ea waranti ena e tlameha ho amoheloa ka mongolo ke LTECH feela.
Ha ho tsebiso e 'ngoe haeba ho na le liphetoho bukeng ea tataiso.
Mosebetsi oa sehlahisoa o itšetlehile ka thepa.
Ka kopo, ikutloe u lokolohile ho ikopanya le morekisi oa rona oa semmuso haeba ho na le potso.
www.ltech-led.com
Nako ea Nchafatso: 2020.06.05_A1
Litokomane / Lisebelisoa
 |
LTECH EX2 LED Touch Controller [pdf] Buka ea Taelo EX2, EX4S, LED Touch Controller, EX2 LED Touch Controller |
