LEDYi Lighting V4-D LED RF Controller Buka ea Mosebelisi

RGBW/RGB/CCT/Dimming 4 Channel LED RF Controller
Nomoro ea mohlala: V4-D
Buka ea Mosebelisi Ver 1.1.0

4 Channels / Four PWM frequency/ Linear or logarithmic dimming/ Numeric display/Din Rail/Tshireletso e mengata

Litaba pata

1 Likaroloana

2 Tekheniki Parameters

3 Mechanical Structures le Installations

4 Setšoantšo sa Wiring

5 Tshebetso

6 Setlhophiso sa curve e nyenyefatsang

7 Litokomane / Lisebelisoa

7.1 Litšupiso

8 Related Posts

Likaroloana

Pontšo ea linomoro tsa dijithale le ts'ebetso e bonolo ea linotlolo.
E ka beha e le 1 channel dimmer, 4 channel dimmer, mebala e 'meli, RGB kapa RGBW molaoli.

Bapisa le RF 2.4G sebaka se le seng kapa 'mala o le mong oa libaka tse ngata,
mebala e 'meli le taolo e hole ea RGB/RGBW.
Taolo e le 'ngoe ea RF e amohela taolo e hole ea 10.

Maemo a 4096 0-100% a fifala ka thelelo ntle le khanya ea letho.
Ha o sebelisa le khanya ea RGB/RGBW, e hahiloeng ka mokhoa o matla oa 10, e kenyelletsa ho tlola kapa mokhoa oa ho fetoha butle.

PWM maqhubu 1000/2000/4000/8000Hz khethang ho tsona.
Logarithmic kapa linear dimming curve e ka khethoa.

Khanya ea ho tima/e tima nako ea ho fifala 0 - 20s e ka khethoang.
Ts'ebetso ea ho fetisa ka boits'oaro: Taolo e fetisa lets'oao ka bo eona
ho molaoli e mong ea nang le sebaka sa taolo sa 30m.

Amahanya ka palo e mengata ea balaoli.
Ho feta mocheso / mojaro o fetang / Ts'ireletso ea potoloho e khuts'oane e hlaphoheloa ka bo eona.

E fumaneha ka bosoeu kapa botsho.

Tekheniki Parameters

Kenyeletso le Sephetho
Keletso voltage	12-24VDC
Kenya hona joale	20.5A
Sephetho voltage	4 x (12-24)VDC
Sephetho sa hajoale	4CH,5A/CH
Matla a hlahisang	4 x (60-120)W
Mofuta oa tlhahiso	Kamehla voltage
Tšireletseho le EMC
EMC e tloaelehileng (EMC)	ETSI EN 301 489-1 V2.2.3 ETSI EN 301 489-17 V3.2.4
Tekanyetso ea polokeho(LVD)	EN 62368-1:2020+A11:2020
Thepa ea Radio(RED)	ETSI EN 300 328 V2.2.2
Setifikeiti	CE,EMC,LVD,RED
Tikoloho
Mocheso oa ts'ebetso	Tekanyo: -30°C ~ +55°C
Thempereichara ea boholo (Boholo.)	T c: +85°C
Lintlha tsa IP	IP20
Ho fokotsa data
Lets'oao la ho kenya	Senotlolo + RF 2.4GHz
Bohole ba ho laola	30m(Sebaka se senang mekoallo)
Sekala se boputsoa se fifalang	4096 (2^12) maemo
Lebala la dimming	0 -100%
Lekhalo le nyenyefatsang	Logarithmic kapa linear
Maqhubu a PWM	1000/2000/4000 / 8000Hz
Tiisetso le Tshireletso
Tiisetso	5 lilemo
Tshireletso	Khutlela Polarity Mocheso o feteletseng Moroalo o fetelletseng Potoloho e khutšoanyane
Boima ba 'mele
Boima bo kahare	0.099kg
Boima bo felletseng	0.153kg

Mechanical Structures le Installations

Setšoantšo sa Wiring

Tshebetso

Mofuta o bobebe le litlhophiso tse ling tsa parameter

Tobetsa nako e telele M le ◀ konopo bakeng sa 2s, lokisetsa parameter ea tsamaiso ea ho seta: mofuta o khanyang, maqhubu a PWM a tsoang, lekhalo le khanyang, nako ea ho tima / ho tima, skrine e se nang letho. tobetsa M konopo ho switjha
Mofuta oa khanya: tobetsa hakhutšoanyane ◀ kapa ▶ konopo ho fetola "Ch1"), mocheso oa mebala e 'meli ("Ch2") , RGB("Ch3"), RGBW("Ch4") le 4 channel dimmer("CH4").

Phatlalatso ea PWM: tobetsa hakhutšoanyane ◀ kapa ▶ konopo ho fetola 1000Hz(“F10”), 2000Hz(“F20”), 4000Hz(“F40”) kapa 8000Hz(“F80”).
Maqhubu a phahameng a PWM, a tla baka molumo o tlase oa hona joale, lerata le phahameng la matla, empa a loketse kh'amera (Ha ho li-flickers tsa video).
Mokokotlo o khanyang: tobetsa hakhutšoanyane ◀ kapa ▶ konopo ho fetola linear curve(“CL”) kapa logarithmic curve(“CE”).

Khanya ea ho tima/e tima nako: tobetsa hakhutšoanyane - kapa + konopo ho switjha 0.5s("d00"), 2s("d02"), 3s("d03"), 5s("d05"), 10s("d10") kapa 20s(“d20”) fide on/off time.
Sekrine se se nang letho se iketselitseng: tobetsa hakhutšoanyane ◀ kapa ▶ konopo ho switjha ("bon") kapa tima ("boF") skrineng se se nang letho.

Tobetsa nako e telele konopo ea M bakeng sa 2s kapa timeout 10s, tlohela tlhophiso ea paramethara ea sistimi.

1 Channel Dimmer

Phatlalatso ea liteishene tse 'ne e hokahanya lesela le le leng la mebala e mene ea LED, hlokomela dimming e lumellanang.
Tobetsa hakhutšoanyane M konopo ho switjha dimming e mahoashe le

Ho fifala ho hoholo: tobetsa hakhutšoanyane ◀ kapa ▶ konopo ho lokisa khanya ea maemo a 10(b-1, b-9, bF).
Fine dimming: tobetsa ka bokhutšoanyane ◀ kapa ▶ konopo ho fetola khanya ea maemo a 256(b01~bFF).

Taolo ea mocheso oa mebala e 'meli

Phatlalatso ea liteishene tse 'ne e hokahanya lihlopha tse peli tsa mebala e habeli ea LED strip (WW le CW).
Tobetsa hakhutšoanyane M konopo ho fetola mocheso oa 'mala kapa ho fetola khanya.
Tobetsa ◀ kapa ▶ konopo ho beha boleng ba ntho ka 'ngoe.
Mocheso oa mebala: 2700-6500K, bonts'a "270 ~ 650", khatiso e khutšoanyane ea maemo a 11, khatello e telele ea maemo a 256.
Khanya: Khanya ea boemo ba 1-10(b-1,b-9,bF).

Molaoli oa RGB/RGBW

Fur ch°nnel °utput c°nnect RGB/RGBW LED strip.
Tobetsa ka nako e khutšoanyane konopo ea M, fetola mokhoa o feto-fetohang o tsitsitseng(PH) le mokhoa oa 10 oa phetoho(P01—P10).
Ha o sebetsa ka mokhoa o feto-fetohang, o ka fetola khanya ea likanale tse tharo/ne ka ho latellana. Tobetsa nako e khutšoanyane M key switjha tharo/100 dimming tsa kanale (1-200FF, 2-300FF, 3-400FF, 4-XNUMXFF), tobetsa ◀ kapa } konopo lokisa kganya ka nngwe ya kanale.
Ha o sebelisa mokhoa oa ho fetola 10, o ka fetola lebelo le khanya ea mofuta o mong le o mong, khanya ea W (RGBW feela). Tobetsa hakhutšoanyane M konopo ho fetola lebelo le ntho e khanyang. Lebelo la mokhoa: lebelo la boemo ba 1-10 (S-1, S-9, SF). Khanya ea mokhoa: khanya ea boemo ba 1-10(b-1, b-9, bF). Khanya ea kanale ea W: khanya ea boemo ba 0-255 (400-4FF).

Lenane la mefuta e matla ea RGB/RGBW

Che.	Lebitso	Che.	Lebitso
P01	RGB e tlole	P06	RGB e nyamela kahare le ho tsoa
P02	RGB e bonolo	P07	Bofubelu bo nyamela ka hare le ka ntle
P03	6 tlola ka mebala	P08	Botala bo nyamela ka hare le ka ntle
PO4	6 mmala o boreleli	P09	Boputsoa bo fifala kahare le kantle
P05	Bopherese bo bosehla ba cyan bo boreleli	P10	Bosoeu bo fela ka hare le ka ntle

4 Channel Dimmer

Phatlalatso ea liteishene tse 'ne e hokahanya lesela le le leng la mebala e mene ea LED, hlokomela ho fifala ha motho ka mong.

Tobetsa hakhutšoanyane M key, switjha static adjustable mode(PH) le dynamic mode e mene(P-1~P-4).
Ha o sebelisa mokhoa o feto-fetohang o tsitsitseng, o ka fetola khanya ea likanale tse 'ne ka ho latellana.
Tobetsa hakhutšoanyane M key switjha dimming tsa dikanale tse nne(100~1FF, 200~2FF, 300~3FF, 400~4FF), tobetsa ◀ kapa ▶ konopo lokisa khanya ka 'ngoe ea kanale.
Ha o sebelisa mekhoa e mene ea dynamic, e ka fetola lebelo le khanya ea mofuta o mong le o mong.
Tobetsa hakhutšoanyane M konopo ho fetola lebelo le ntho e khanyang.
Lebelo la mokhoa: lebelo la boemo ba 1-10 (S-1, S-9, SF).
Khanya ea mokhoa: khanya ea boemo ba 1-10(b-1, b-9, bF).

Lenane la mekhoa e 4 ea dimmer dynamic

Che.	Lebitso
P-1	4ch khanya le tima ka tatellano
P-2	4ch khanya e le 'ngoe ka tatellano
P-3	4ch light fadein le fadeout ka ho lumellana
P-4	4ch light fadein le fadeout ka tatellano

Bulela/ tima lebone

Tobetsa nako e telele M key 2s, tima lebone, hlahisa "OFF".

Ha o tinngoe, tobetsa konopo e khuts'oane ea M, o bulele lebone.

Bapisa RF Remote

Match: Tobetsa nako e telele M le ▶ konopo bakeng sa 2s, hlahisa "RLS", ka hare ho 5s, tobetsa konopo ea on/off kapa zone key ea remote, hlahisa "RLO", papali e atlehile,

Hlakola: Tobetsa nako e telele M le ▶ konopo bakeng sa 5s, ho fihlela ho hlahisa "RLE", hlakola li-remoutu tsohle tse tsamaellanang.
Ts'ebetso ea papali e ke ke ea fetola mofuta oa lebone la controller ka bo eona, o tlameha ho seta mofuta oa leseli ka ts'ebetso ea senotlolo, etsa bonnete ba hore mofuta oa leseli oa remote le molaoli oa tšoana.

Khutlisa paramethara ea kamehla ea feme

Tobetsa nako e telele ◀ le ▶ konopo bakeng sa 2s, khutlisetsa parameter ea kamehla ea feme, bonts'a"RES".
Paramethara ea kamehla ea feme: ntle le sebaka se hole se ts'oanang, mofuta oa RGBW, tlhahiso ea maqhubu a 1000Hz PWM, curve e khanyang ea logarithmic, khanya ea 0.5s ea ho tima / ho tima nako, nomoro ea mokhoa oa RGB ke 1, tima skrine e se nang letho.