LATCH R Series e Kopanya Molaoli oa Monyako oa Reader

Tlhahisoleseding ya Sehlahiswa

Latch System Specification Guidelines e fana ka tlhahisoleseding e mabapi le Latch R Series, e leng sehlahisoa se kopanyang 'mali, molaoli oa monyako le tsamaiso ea tsamaiso ho sesebelisoa se le seng se bonolo. E ka hokela mochining ofe kapa ofe oa ho notlela o nang le motlakase hammoho le li-detectors tse tsamaeang le ho kopa ho tsoa lisebelisoa. Sesebelisoa se tla le litifikeiti tse kang FCC Karolo ea 15 (US), IC RSS (Canada), UL 294, UL/CSA 62368-1, le RoHS. Latch R Series e na le litlhophiso tse fapaneng tse kang tse ikemetseng, tse ikemetseng le Door State
Tsebiso (DSN), Wiegand-interfaced le 3rd party Access Control Panel, le Elevator Floor Access (EFA).

Litaelo tsa Tšebeliso ea Sehlahisoa

Latch R Series e ka hlophisoa ka mekhoa e fapaneng ho latela litlhoko tsa mosebelisi. Ho sebelisa sesebediswa ho tlhophiso ya sona e ikemetseng, hokela R Reader ho hardware e notlelang lemati ka dipoelo tsa yona tse omeletseng tsa relay. Tlama konopo ea Kopo ea ho Tsoa ho R Reader's IO1 inputs. Basebelisi ba ka boela ba lokisa sesebelisoa ka mokhoa o ikemetseng ka tlhophiso ea Door State Notification (DSN). Tokiso ena e romella litsebiso ho Batsamaisi ba Thepa ba ngolisitseng bakeng sa Door Ajar, Door Still Ajar, Door Breached, le Door Secured states. Basebelisi ba ka boela ba sebelisa Latch R Series ho Wiegand-interfaced le 3rd party Access Control Panel configuration. Tokisong ena, R Reader e hokahane le Wiegand le phanele ea taolo ea phihlello ea motho oa boraro. Ts'ebetso ea lisebelisoa tsa ho notlela monyako le ho lekola boemo ba monyako li etsoa ke phanele ea taolo ea phihlello. Qetellong, basebelisi ba ka sebelisa Latch R Series ho tlhophiso ea Elevator Floor Access (EFA). Tokisong ena, R Reader e hokahane le Wiegand le phanele ea taolo ea phihlello ea motho oa boraro. Liphetho tsa phanele ea taolo li tlameletsoe ho molaoli oa lifti. Marang-rang a tlameha ho fuoa R Reader. Haeba R Reader e kentsoe ka har'a cab ea lifti, thapo ea Coax le Ethernet holim'a li-transceivers tsa Coax li lokela ho sebelisoa ho netefatsa khokahanyo ea inthanete ea R. Liphanele tsa taolo ea phihlello ea mokha oa boraro bakeng sa EFA li teng.

LETS'OA R LEHLOKO

Latch R Series e kopanya 'mali, molaoli oa menyako, le tsamaiso ea tsamaiso hore e be sehlahisoa se le seng se bonolo. Sesebelisoa se hokela ka kotloloho mochining ofe kapa ofe oa ho notlela o nang le motlakase ho kenyelletsa li-detectors tse tsamaeang le ho kopa ho tsoa lisebelisoa.

 Latch R, Litlhaloso Kakaretso

• Boholo ba Metjhini: 5.6" x 3.2" x 0.8"
• Mounting: Sebaka se holim'a metsi, se lumellana le mabokose a sehlopha se le seng
• Tikoloho:
  •  Mocheso oa ho sebetsa le oa ho boloka: -40°C ho isa ho 66°C (-40ºF ho isa ho 150.8ºF)
  • Mongobo o sebetsang: 0-93% mongobo o lekanyelitsoeng, o sa fokotseheng ho 32°C (89.6°F)
  • Tikoloho: IP65, IK04
• Matla: Class 2 Isolated, UL Listed DC Power Supply
  •  Phepelo Voltage: 12VDC ho 24VDC
  • Matla a Tšebetso: 3W (0.25A@12VDC, 0.12A@24VDC)
•  Mefuta ea Bopaki: Smartphone, Karete ea NFC, Khoutu ea monyako
• Basebelisi: 5000
•  Khamera: 135° ho nka setšoantšo
• Configuration: Ka phanele e teng ea taolo ea phihlello kapa e ikemetseng
• Lock Relay: Mofuta o hlophisitsoeng oa C relay, 1.5A @24VDC kapa @24VAC boholo
• Lintho tse kenang le tse hlahisoang: tse 3 tse ka hlophisoang
•  Pheliso: Lithapo tse 10 tsa li-conductor tse nang le lithapo tse kentsoeng pele
• Tsamaiso: App le Cloud
• Maemo a Se nang Waele:
  •  Near Field Communication (NFC) NFC Frequency: 13.56 MHz NFC Bala Range: Ho fihla ho 0.75” Mofuta oa NFC: MiFare Classic
  •  Bluetooth Low Energy (BLE)
•  Maemo a Wired:
  •  Ethernet: 10/100Mbps, RJ45 Male Plug
  • Lethathamo: RS-485
  • Wiegand: Sephetho feela
• Li-smartphone tse tšehelitsoeng: iOS le Android (bona websebaka sa lethathamo la li-smartphones tse tšehetsoeng ka botlalo)
•  Puisano ea Pono: Li-LED tse 7 tse tšoeu
•  Interface: Lisebelisoa tsa mohala, touchpad, NFC, le web
• Warranty: Tiisetso e lekantsoeng ea selemo se le seng ho likarolo tsa elektroniki, waranti e lekantsoeng ea lilemo tse 1 ho likarolo tsa mochini
• Setifikeiti:
  •  FCC Karolo ea 15 (US)
  • IC RSS (Canada)
  •  UL 294
  •  UL/CSA 62368-1
  •  RoHS

 Latch R, Sebopeho sa Standalone
Tokisong ena, R Reader e laola lisebelisoa tsa ho notlela lemati ka liphetho tsa eona tse omeletseng tsa relay. Konopo ea ho Tsoa e hokahane le lintho tse kentsoeng ke R Reader's IO1.
Litlhoko tsa Wiring tsa Latch R Standalone Configuration
Tataiso ea ho Kenya Latch R & Lintlha tsa Tech

Latch R, e ikemetseng e nang le Tlhophiso ea Door State Notification (DSN).
Litsebiso tsa Door State li tla romella litsebiso ho Batsamaisi ba Thepa ba ngolisitseng bakeng sa Linaha tse latelang tsa Menyako:

1. Door Ajar: Monyako o buloa ka nako e telele.
   • Nako e ka hlophisoa lipakeng tsa 30, 60, le 90 metsotsoana.
2. Door Still Ajar:
   •  Nako e ka hlophisoa lipakeng tsa 5, 10, le 15 metsotso.
   • Tsebiso ena e romeloa khafetsa ka nako ena ho fihlela lemati le koetsoe.
3. Lemati le Senyehile: Lemati le buloa ka likhoka.
   • Ha lemati le buloa ka ntle ntle le lengolo le nepahetseng.
4. Monyako o Sirelelitsoe: Monyako o koetsoe ka mor'a leha e le efe ea linaha tse ka holimo tsa Door.

Latch R Standalone Configuration Wiring with Door State Notification (DSN)

 Latch R, Wiegand-Interfaced le 3rd Party Access Control Panel
Tokisong ena, R Reader e hokahane le Wiegand le phanele ea taolo ea phihlello ea motho oa boraro. Ts'ebetso ea lisebelisoa tsa ho notlela monyako le ho lekola boemo ba monyako li etsoa ke phanele ea taolo ea phihlello. Phanele efe kapa efe ea taolo ea phihlello ea mokha oa boraro e ts'ehetsang sebopeho sa 3-bit Wiegand e ea tsamaellana.
Latch R Wiegand-interfaced le 3rd party Access Control Panel Wiring Litlhokahalo

Latch R, Elevator Floor Access (EFA)
Tokisong ena, R Reader e hokahane le Wiegand le phanele ea taolo ea phihlello ea motho oa boraro. Liphetho tsa phanele ea taolo li tlameletsoe ho molaoli oa lifti. Marang-rang a tlameha ho fuoa R Reader. Haeba R Reader e kentsoe ka har'a cab ea lifti, thapo ea Coax le Ethernet holim'a li-transceivers tsa Coax li lokela ho sebelisoa ho netefatsa khokahanyo ea inthanete ea R. Liphanele tsa taolo ea phihlello ea mokha oa boraro bakeng sa EFA ke:

•  Tlhaloso: ACS6000
•  KeyScan: EC1500, EC2500
• Software House: iSTAR Edge, iSTAR Ultra, iSTAR Pro
• Li-blades tsa S2

Litlhoko tsa Wiring tsa Latch R Elevator Floor (EFA).
Latch R, Elevator Destination Dispatch
Destination Dispatch ke mokhoa oa ho ntlafatsa o sebelisoang bakeng sa ho kenya li-lifti tse ngata. E hlopha bapalami ba eang libakeng tse tšoanang ka lifti tse tšoanang. Sena se fokotsa nako ea ho ema le ho tsamaea ha ho bapisoa le mokhoa o tloaelehileng oo bapalami bohle ba kenang lifti leha e le efe e teng ebe ba kopa moo ba eang teng. Ho sebelisa sephutheloana seo u eang ho sona, bapalami ba kopa ho ea mokatong o itseng ba sebelisa letlapa la likonopo ka kamoreng ea kamohelo ea baeti 'me ba lebisoa koloing e loketseng ea lifti. E le ho fana ka bokhoni ba ho tsamaisa sebaka sa Elevator Destination Dispatch, Latch R e hloka ho kopanngoa le sethaleng sa Braxos Steward Security Software.
Hlokomela: ProMag Wiegand ho IP converter ea hlokahala ho Latch R ka 'ngoe e sebelisitsoeng.
Latch R e hokahane le Braxos Steward bakeng sa Elevator Destination Dispatch
LATCH-BRAXOS STEWARD Letšoao la Phallo ea Phallo ea Phallo ea Elevator

KHOTHA INTERCOM

Latch Intercom e bonolo, e tenyetseha, e sireletsehile, 'me e etselitsoe ho lumella batho ba nepahetseng hore ba kene ka linako tsohle. Likonopo tse tactile li amohela moeti e mong le e mong maemong 'ohle a leholimo, likhokahano tse ncha li thusa ho kenya habonolo monyako o mong le o mong, le khetla e nang le fiber composite le likhalase tse sa keneleng matla. ke tlatsetso e phethahetseng bakeng sa moaho oa sejoale-joale.

 Latch Intercom, Litlhaloso Kakaretso

•  Boholo ba Metjhini: 12.82" X 6.53" X 1.38" 325.6mm X 166.0mm X 35.1mm
•  Mounting: Moupa o holim'a metsi
•  Lisebelisoa: tšepe e sa hloekang, resin e matlafalitsoeng ka fiber ea khalase, le likhalase tse sa ameheng
•  Tikoloho:
  •  Mocheso oa ho sebetsa: -30°C ho isa ho 60°C (-22ºF ho isa ho 140ºF)
  • Mongobo: 95%, ha o fokotsehe
  • Ho hanyetsa lerole le metsi: IP65
• Matla:
  • Phepelo ea Matla: Sehlopha sa 2 se Ikhethile, UL e thathamisitsoe ho DC Power Supply
  • Phepelo Voltage: 12VDC ho 24VDC
  • PoE: 802.3bt e nang le 50W +
  • Tšebeliso ea Matla: Tloaelehileng: 20W, Max: 50W
• Puisano:
  • Ethernet: Cat5e/Cat6 10/100/1000 Mbps
  • WiFi: 2.4/5 GHz, 802.11a/b/g/n/ac
  •  Cellular: Sehlopha sa 1
  •  Bluetooth: Bluetooth 4.2
  • Aterese ea IP: DHCP kapa IP e tsitsitseng
•  Audio le Video:
  •  Lerata le phahameng: 90dB max volume
  • Microphone: Maekerofounu e habeli, ho hlakola molumo, le ho fokotsa lerata
  • Lik'hamera tse Tšehetsoeng: Li ka kopanngoa le Latch Camera
  •  E tšehetsoeng ka har'a yuniti ea VoIP PBX terminal: Fanvil i10D SIP Mini Intercom
•  Skrine:
  •  Khanya: 1000 nits
  •  Viewing Angle: 176 likhato
  • Boholo: 7" diagonal
  •  Liaparo: Anti-reflection, anti-fingerprint
•  Setifikeiti:
  • FCC Karolo ea 15 Karoloana ea B/C/E
  •  Karolo ea 24 ea FCC
  •  IC RSS-130/133/139/247
  •  PTCRB
  •  TLHOKOMELISO
  • UL294
  • IP65
• Tumellano:
  • E lumellana le Molao oa Maamerika a nang le Bokooa

KHAMELA KHAMELA

Khamera ea Latch e tlatselletsa tharollo ea Latch Intercom, e fana ka mehala e sireletsehileng ea video bakeng sa baahi le baeti.

 Khamera ea Latch, Litlhaloso Kakaretso

• Mechini
  •  Boholo ba Metjhini: 5.3" x 4.1"
  •  Boima ba 'mele: 819 g.
  • Ho hlongoa: Sebaka se holimo, 4 ″ motlakase octagka lebokoseng & lebokose le le leng la lihlopha tse sebelisang Latch Camera Adapter Plate
•  Tikoloho:
  • Mocheso oa ho sebetsa: -30°C -60°C (-22°F – 140°F)
  •  Mongobo: 90%, ha o fokotsehe
  •  Ho Hanyetsa Lerōle le Metsi: IP66, IK10
  • Matla: IEEE 802.3af PoE Sehlopha sa 0
  •  Tšebeliso ea Matla: Max. 12.95 W (IR ho)
    Boholo. 9 W (IR e koetsoe)
•  Sistimi:
  • Mohlala: LC9368-HTV
  • CPU: Multimedia SoC (system-on-chip)
  • Flash: 128MB
  •  RAM: 256MB
  • Ho boloka: 256GB karete ea SD
• Likarolo tsa Khamera
  •  Sensor ea setšoantšo: 1/2.9" CMOS e tsoelang pele
  •  Max. Qeto: 1920×1080 (2MP)
  • Mofuta oa Lense: E entsoe ka enjene, e tsepamisitsoeng maikutlo, e shebane le hole
  • Bolelele ba Tsepamiso: f = 2.8 ~ 12 mm
  • Sekoti: F1.4 ~ F2.8
  • Auto-Iris: E tsitsitseng-iris
  •  Tšimo ea View: E tšekaletseng: 32° - 93°
    E otlolohileng: 18° - 50°
    Diagonal: 37 ° - 110 °
  • Nako ea ho koala: 1/5 motsotsoana ho isa ho 1/32,000 motsotsoana
  • Theknoloji ea WDR: WDR Pro
  •  Motšehare/Bosiu: E
  • Sefa se ka tlosoang sa IR-cut: E
  • Li-Illuminator tsa IR: Li-Illuminator tsa IR tse hahelletsoeng ho fihla ho limithara tse 30 tse nang le Smart IR, IR LED*2.
  • Bonyane Bonyane: 0.055 lux @ F1.4 (Mmala)
    <0.005 lux @ F1.4 (B/W)
    0 lux e nang le khanya ea IR
  •  Bophahamo ba sebaka: 353
  • Sebaka se sekamang: 75 °
  •  Sebaka sa ho potoloha: 350 °
  •  Ts'ebetso ea Pan/Tilt/Atometsa: ePTZ: 48x zoom ea dijithale (4x ho IE plug-in, e hahelletsoeng ka 12x)
  • . Pokello ea Boto: Mofuta oa slot: MicroSD/SDHC
• Video:
  • Khatello ea Video: H.265, H.264, MJPEG
  •  Sekhahla se Phahameng sa Frame: 30fps @ 1920×1080
  • . S/N Karo-karolelano: 68 dB
  • Matla a Matla: 120 dB
  • Phallo ea Video: Qeto e ka feto-fetohang, boleng, le bitrate
  • Litlhophiso tsa Litšoantšo: Nako ea stamp, mongolo o koaheletsoeng, flip & seipone, khanya e lokisehang, phapang, saturation, bohale, tekano e tšoeu, taolo ea ho pepeseha, phaello, matšeliso a backlight, limaske tsa lekunutu; pro e hlophisitsoengfile litlhophiso, HLC, defog, 3DNR, ho potoloha ha video
•  Molumo:
  • Bokhoni ba molumo: molumo oa tsela e le 'ngoe
  • Khatello ea Audio: G.711, G.726
  • Sebopeho sa Audio: Microphone e hahiloeng
  • Range e sebetsang: 5 metres
•  Marang-rang:
  • Protocols: 802.1X, ARP, CIFS/SMB, CoS, DDNS, DHCP, DNS, FTP, HTTP, HTTPS, ICMP, IGMP, IPv 4, IPv 6, NTP, PPPoE, QoS, RTSP/RTP/RTCP, SMTP, SNMP , SSL, TCP/IP, TLS, UDP, UPnP
  •  Sebopeho: 10 Base-T/100 Base-TX ethernet (RJ-45)
  • ONVIF: E tšehelitsoe
• Tiisetso:
  •  Tiisetso e lekanyelitsoeng ea likhoeli tse 12
•  Setifikeiti:
  • CE
  • Sehlopha sa FCC B
  •  UL
  • LVD
  • VCCI
  • C-Tšoaea
  • IP66
  •  IK10

 LATCH M SERIES (PHASING OUT)

Latch M e na le "cartridge" e tloaelehileng ea indasteri bohareng ba eona, e etselitsoeng ho kopana le ho feta litlhoko tsohle tsa projeke. E hahiloe ka litekanyetso tse phahameng ka ho fetisisa tsa khoebo, e tsamaellanang le litlhoko tsa khoutu ea hau 'me e sebetsa bakeng sa tšebeliso ea ka hare kapa ka ntle.

Latch M, Litlhaloso Kakaretso

•  Mechini Lock Mmele
  • Mechini: Mortise deadbolt
  •  Ho fana ka: Tšimo e ka khutlisetsoa morao
  • Temano ea Botenya ba Monyako: 1 ¾”
  •  Tšebelisano ea Backset: 2 ¾"
  • Likhetho tsa Setaele sa Lever: Boemo le ho khutla
  • Latch bolt Latch: ¾”
  •  Deadbolt Lahla: 1”
  •  Letlapa la ho otla: 1 ¼" x 4 ⅞, 1 ¼" molomo
  • Cylinder: senotlolo sa mofuta oa Schlage C
• Qetella: Silver, Gold, Black
• Tikoloho:
  •  Thempereichara ea ho sebetsa:
    1. Ka ntle: -22ºF ho isa ho 158ºF (-30ºC ho isa ho 70ºC)
    2. Ka hare: -4ºF ho 129.2ºF (-20ºC ho 54ºC)
    3. Mongobo o sebetsang: 0-95% mongobo o amanang, o sa lumellaneng
•  Lintlha tsa Theknoloji:
  •  Matla:
    1. Class 2 Isolated, UL Listed DC Power Supply
    2.  Phepelo VoltagE: 12VDC
    3. Matla a Tšebetso: 2.4W (0.2A @12VDC)
    4. Phepelo ea Matla a Battery: 6 AA libetri tsa alkaline tse sa tjhajoeng hape
    5.  Bophelo ba Battery: Likhoeli tse 12 ka tšebeliso e tloaelehileng
    6.  Boemo ba Battery: Tlhokomelo le litemoso ho Latch software suite
  • Maemo a Se nang Waele:
    1. Haufi le Puisano ea Tšimo (NFC)
    2. Bluetooth Low Energy (BLE)
    3. Nako ea NFC: 13.56 MHz
    4.  NFC Read Range: Ho fihla ho 1.18”
    5.  Mofuta oa NFC: MIFARE Classic
  • Mefuta ea Bopaki: Smartphone, Karete ea NFC, Khoutu ea Lemati, Senotlolo sa Mechini
  • Li-smartphone tse tšehelitsoeng: iOS le Android (bona websebaka sa lethathamo la li-smartphone tse tšehetsoeng ka botlalo)
  • Basebelisi: 1500
  • Khamera: 135° ho nka setšoantšo
  • Tsamaiso: App le Cloud
  • Puisano ea Pono: Li-LED tse 7 tse tšoeu
  • Interface: Lisebelisoa tsa mohala, touchpad, NFC, le web
•  Tiisetso:
  •  Tiisetso e lekantsoeng ea selemo se le seng ho likarolo tsa elektroniki
  •  Tiisetso e lekanyelitsoeng ea lilemo tse 5 ho likarolo tsa mochini
• Setifikeiti:
  •  UL 10B (90min)
  • UL 10C (90min)
  •  ULC S104
  •  FCC Karolo ea 15 Karoloana ea C
  •  IC RSS-310
  •  Tlhaloso: IEC 61000-4-2
  • FL TAS 201-94, 202-94, 203-94
  •  E hahiloe ho ANSI/BHMA 156.13 Series 1000 Grade 1
•  Tumellano:
  • E lumellana le Molao oa Maamerika a nang le Bokooa

LEHLOKO M2 LEHLOKO

Latch M2 e na le "cartridge" e tloaelehileng ea indasteri bohareng ba eona, e etselitsoeng ho fihlela litlhoko tsohle tsa projeke. E hahiloe ka litekanyetso tse phahameng ka ho fetisisa tsa khoebo, e tsamaellanang le litlhoko tsa khoutu ea hau 'me e sebetsa bakeng sa tšebeliso ea ka hare kapa ka ntle.

Latch M2, Litlhaloso Kakaretso

•  Mechini Lock Mmele
  • Mechini: Mortise deadbolt
  • Ho fana ka: Tšimo e ka khutlisetsoa morao
  •  Temano ea Botenya ba Monyako: 1 ¾”
  • Tšebelisano ea Backset: 2 ¾"
  • Likhetho tsa Setaele sa Lever: Boemo le ho khutla
  • Latch bolt Latch: ¾”
  •  Deadbolt Lahla: 1”
  •  Letlapa la ho otla: 1 ¼" x 4 ⅞, 1 ¼" molomo
  • Cylinder: senotlolo sa mofuta oa Schlage C
• Qetella: Silver, Gold, Black
• Tikoloho:
  •  Thempereichara ea ho sebetsa:
    1.  Ka ntle: -22ºF ho isa ho 158ºF (-30ºC ho isa ho 70ºC)
    2. Ka hare: -4ºF ho 129.2ºF (-20ºC ho 54ºC)
    3. Mongobo o sebetsang: 0-95% mongobo o amanang, o sa lumellaneng
• Lintlha tsa Theknoloji:
  • Matla:
    1.  Phepelo ea Matla a Battery: 6 AA libetri tsa alkaline tse sa tjhajoeng hape
    2. Bophelo ba Battery: Likhoeli tse 24 ka tšebeliso e tloaelehileng
    3. Boemo ba Battery: Tlhokomelo le litemoso ho Latch software suite
  • Maemo a Se nang Waele:
    1. Haufi le Puisano ea Tšimo (NFC)
    2. Bluetooth Low Energy (BLE)
    3. Nako ea NFC: 13.56 MHz
    4. NFC Read Range: Ho fihla ho 1.18”
    5.  Mofuta oa NFC: MIFARE Classic
  •  Mefuta ea Bopaki: Smartphone, Karete ea NFC, Khoutu ea Lemati, Senotlolo sa Mechini
  •  Li-smartphone tse tšehelitsoeng: iOS le Android (bona websebaka sa lethathamo la li-smartphone tse tšehetsoeng ka botlalo)
  • Basebelisi: 1500
  • Tsamaiso: App le Cloud
  • Puisano ea Pono: Li-LED tse 7 tse tšoeu
  •  Interface: Lisebelisoa tsa mohala, touchpad, NFC, le web
• Tiisetso:
  •  Tiisetso e lekantsoeng ea selemo se le seng ho likarolo tsa elektroniki
  • Tiisetso e lekanyelitsoeng ea lilemo tse 5 ho likarolo tsa mochini
• Setifikeiti:
  •  UL 10B (90min)
  • UL 10C (90min)
  •  CAN/ULC S104
  •  Karolo ea 15 ea FCC
  •  IC RSS
  •  FL TAS 201-94, 202-94, 203-94
  •  E hahiloe ho ANSI/BHMA 156.13 Kereiti ea 1
• Tumellano:
  •  E lumellana le Molao oa Maamerika a nang le Bokooa

LATCH C SERIES (PHASING OUT)

Latch C ke "cylindrical deadbolt" e khonang ho khutlela mohahong o seng o ntse o le teng kapa ea eketsoa sebakeng sa morero o mocha. Joalo ka M
Series, ha e hloke khokahanyo ea marang-rang 'me e lekantsoe ho kopana le likhoutu tsa moaho tse thata ka ho fetesisa.

Latch C, Litlhaloso Kakaretso

•  Mechini Lock Mmele
  • Chassis ea mechine: Deadbolt
  • Ho fana ka: Tšimo e ka khutlisetsoa morao
  • Tumellano ea Botenya ba Monyako: 1 ¾” le 1 ⅜”
  • Tšebelisano ea Backset: 2 ¾" le 2 ⅜"
  • Lever Style: E tloaelehileng, khutlela
  • Lever Mechanical Dimensions: 5.9" X 2.4" X 2.8"
  • Tokisetso ea Monyako: 5 ½” Setsi ho ea Bohareng
  • Lever Set Substitution: E lumelletsoe
  •  Deadbolt Lahla: 1”
  •  Likhetho tsa Faceplate: 1" x 2 ¼" sekhutlo se chitja, 1 ″ x 2 ¼ "sekoere sekhutlo, ka koloing
  • Strike Plate: 1 ⅛" x 2 ¾" seteraeke sa tshireletso
  •  Cylinder: senotlolo sa mofuta oa Schlage C
• Qetella: Silver, Black
•  Tikoloho:
  •  Ka ntle: -22ºF ho isa ho 158ºF (-30ºC ho isa ho 70ºC)
  • Ka hare: -4ºF ho 129.2ºF (-20ºC ho 54ºC)
  •  Mongobo o sebetsang: 0-95% mongobo o amanang, o sa lumellaneng
• Lintlha tsa Theknoloji:
  •  Matla:
    1.  Phepelo ea Matla: 6 AA libeteri tsa alkaline tse sa tjhajoeng hape
    2. Bophelo ba Battery: Likhoeli tse 12 ka tšebeliso e tloaelehileng
    3. Boemo ba Battery: Tlhokomelo le litemoso ho Latch software suite
• Maemo a Se nang Waele:
  •  Haufi le Puisano ea Tšimo (NFC)
  • Bluetooth Low Energy (BLE)
  •  Nako ea NFC: 13.56 MHz
  • NFC Read Range: Ho fihla ho 0.75”
  •  Mofuta oa NFC: Mi Fare Classic
• Mefuta ea Bopaki:
  •  Smartphone
  • Karete ea senotlolo
  • Khoutu ea monyako
  •  Senotlolo sa Mechini
• Li-smartphone tse tšehelitsoeng: iOS le Android (bona websebaka sa marang-rang bakeng sa lenane le felletseng la li-smartphone)
• Basebelisi: 1500
• Khamera: 135° ho nka setšoantšo
• Tsamaiso: App le Cloud
• Puisano ea Pono: Li-LED tse 7 tse tšoeu
• Interface: Lisebelisoa tsa mohala, touchpad, NFC le web
•  Tiisetso:
  •  Tiisetso e lekantsoeng ea selemo se le seng ho likarolo tsa elektroniki
  •  Tiisetso e lekanyelitsoeng ea lilemo tse 5 ho likarolo tsa mochini
• Setifikeiti:
  •  UL 10B (90min)
  •  UL 10C (90min)
  • ULC S104
  •  FCC Karolo ea 15 Karoloana ea C
  •  IC RSS-310
  • Tlhaloso: IEC 61000-4-2
  •  FL TAS 201-94, 202-94, 203-94
  • E hahiloe ho ANSI/BHMA 156.36 Kereiti ea 1
• Tumellano:
  •  E lumellana le Molao oa Maamerika a nang le Bokooa

 LATCH C2 DEADBOLT

Ho tlisa Latch OS libakeng tse ling le ho feta, re qapile Latch C2 ho etsa hore lintlafatso le ts'ebetso e tsoelang pele e be bonolo bakeng sa morero o mong le o mong. E le monyako oa tsamaiso ea rona ea tikoloho e pharaletseng, C2 e fana ka ts'ebetso e ntlafetseng le melemo e eketsehileng ho thepa e eketsehileng ka tsamaiso ea rona e feletseng ea ho sebetsa.

Latch C2 Deadbolt, Litlhaloso Kakaretso

• Litlhaloso tsa Mechini:
  •  Sebopeho sa Lock: Patent-pending mechanism deadbolt
  •  Ho fana ka: Tšimo e ka khutlisetsoa morao
  •  Tumellano ea Botenya ba Monyako: 1 ¾” le 1 ⅜”
  • Tšebelisano ea Backset: 2 ¾" le 2 ⅜"
  •  Tokisetso ea Monyako: 5 ½" Setsing sa Bohareng se nang le "1" sefapano
  •  Deadbolt Lahla: 1”
  •  Likhetho tsa Faceplate: 1″ x 2 ¼” huku e chitja, ho kena ka koloi
  •  Strike Plate: 1 ⅛” x 2 ¾” seteraeke se chitja sa tšireletso
• Qetello:
  •  Latch Black Exterior, Latch Black Interior
  • Latch Black Exterior, Latch White Interior
  • Bokantle ba Satin Chrome, Bosoeu ba Latch ka Hare
  • Bokantle bo Bosoeu ba Latch, Hare-hare Bosoeu ba Latch
•  Tikoloho:
  •  Ka ntle: -22ºF ho ea +158ºF (-30ºC ho +70ºC)
  •  Ka hare: -4ºF ho +129.2ºF (-20ºC ho +54ºC)
  • Mongobo o sebetsang: 0-95% mongobo o amanang, o sa lumellaneng
• Matla:
  •  Phepelo ea Matla: 6 AA libeteri tsa alkaline tse sa tjhajoeng hape
  •  Boemo ba Battery: Tlhokomelo e sa sebetseng le litsebiso tse sebetsang ka Latch OS
  • Inductive Jumpstart: Mohloli oa matla o tsamaellanang le Qi o khona ho bula Bluetooth ka waelese ha betri e hloleha.
• Puisano:
  •  Haufi le Puisano ea Tšimo (NFC)
  •  Bluetooth Low Energy 5.0 (BLE)
  •  Nako ea NFC: 13.56 MHz
  •  Mofuta oa NFC: Leseli la Mollo oa DES
• Mefuta ea Bopaki:
  • Smartphone
  • Karete ea bohlokoa ea NFC
  •  Khoutu ea monyako
•  Basebelisi: 1500
• Tsamaiso: App le Cloud
•  Tiisetso:
  •  Tiisetso e lekantsoeng ea selemo se le seng ho likarolo tsa elektroniki
  • Tiisetso e lekanyelitsoeng ea lilemo tse 5 ho likarolo tsa mochini
•  Setifikeiti:
  • UL 10B (90min)
  • UL 10C (90min)
  • CAN/ULC S104 (90min)
  • Karolo ea 15 ea FCC
  • IC RSS
  •  FL TAS 201-94, 202-94, 203-94
  • ANSI/BHMA 156.36 Sehlopha sa 2 E netefalitsoe
•  Tumellano:
  •  E lumellana le Molao oa Maamerika a nang le Bokooa

LETS'OA MOKHOPO

Latch Hub ke tharollo ea khokahanyo ea bohle-in-one e nolofalletsang phihlello e bohlale, ntlo e bohlale le lisebelisoa tsa sensor ho etsa ho eketsehileng mohahong o mong le o mong.

Latch Hub, Litlhaloso Kakaretso

• Mechini
  • Litekanyo: 8" X 8" X 2.25"
  • Ho palama: Lebokose le le leng la sehlopha sa litlokotsebe, lebota, le thaba ea siling
  • Lisebelisoa: Letlapa la khalase le matlafalitsoeng ka fiber
• Tikoloho:
  • Thempereichara ea ho Sebelisa: +32°F ho ea +104°F (0°C ho ea +40°C), Tšebeliso ea Ka tlung Feela
  •  Mongobo o sebetsang: 10% ho isa ho 90% ea mongobo o lekanyelitsoeng, o sa fokotseng
• Phepelo ea motlakase:
• Adapter ea Motlakase ea DC (e rekisoa ka thoko):
  •  Keletso Voltage: 90 - 264 VAC
  • Nako ea ho Kena: 47 – 63 Hz
  • Khumo Voltage: 12 VDC +/- 5%
  • Boholo ba Mojaro: 2 AMPs
  •  Moroalo o Monyenyane: 0 AMPs
  • Taolo ea Mojaro: +/- 5%
• Phepelo ea Matla ka Ntle:
  •  Sehlopha sa 2 se Inohile, Phepelo ea Matla e thathamisitsoeng ke UL
  • Wire Supply Voltage: 12VDC, 2A (2.5mm pigtail connector e hlokeha)
  • Matla holim'a Ethernet (ho sebelisa poE splitter feela): 802.3bt (30W+)
  •  Matla a ho Sebelisa: 20W-50W (Max: 4A @12VDC, Min: 1.75A @ 12VDC)
• Puisano:
  •  Ethernet: 1 Gigabit WAN Port (10/100/1000 Mbps)
  • WiFi: 2.4/5 GHz (E khethiloe), 802.11a/b/g/n/ac
  •  Mehala: 4G LTE Cat 1
  • Bluetooth: ikokobedit se 4.2
  •  IP Aterese: DHCP
  • ZigBee: 3.0
• Setifikeiti:
•  US:
  • FCC Karolo ea 15B / 15C / 15E / 22H / 24E
  • UL 62368
  •  CEC/DOE
  •  PTCRB
  • IEC62133 (Betri)
•  Canada:
  •  IC RSS-210 / 139 / 133 / 132 / 130 / 102 (MPE)
  •  EA-003
  • NRCAN

SEHLOOHO LA METSING

Latch Water Sensor ke sesebelisoa se fanang ka khotso ea kelello ea hore, ha ho lutla ho hlaha, baahi le batsamaisi ba thepa ba tla tsebisoa e le hore mathata a ka rarolloa kapele. Sensor ea Metsi ea Latch e hloka Latch Hub 'me e lokela ho behoa libakeng life kapa life tse nang le ho lutla.

Sensor ea Metsi ea Latch, Litlhaloso tse Akaretsang

• . Mechini
  •  Boholo ba Metjhini: 1.89" X 1.89" X 0.8"
  •  Mouting: Moutloa o holim'a sefahleho, o sebelisa sekhomaretsi se fanoeng
  • lintho tse bonahalang: ABS Boitsebiso CHIMEI PA-757
•  Tikoloho:
  •  Mocheso oa ho sebetsa: +32°F ho ea +122°F (0°C ho ea +50°C)
  •  Mongobo o sebetsang: 10% ho isa ho 80% ea mongobo o lekanyelitsoeng, o sa fokotseng.
  • Mocheso oa Polokelo: +4°F ho ea +140°F (-20°C ho ea +60°C)
  •  Mongobo oa polokelo: -20% - 60% RH (e sa nyenyefatseng)
•  Phepelo ea motlakase:
  •  Matla: 3VDC, 1xCR2 betri
  • Bophelo ba Battery: Lilemo tse 5
• Ho Nepaha ha Sensora ea Mocheso: ±1°C
•  Puisano: ZigBee HA 1.2.1
•  Maqhubu a Radio: 2.4GHz
•  RF Communication Range: Moea o bulehileng: 350m (Max.)
• Setifikeiti:
  • FCC
  •  IC
  • CE
  • ZigBee HA

Litokomane / Lisebelisoa

LATCH R Series e Kopanya Molaoli oa Monyako oa Reader [pdf] Bukana ea Mosebelisi Letoto la R le Kopanya Molaoli oa Monyako oa Reader, Letoto la R, le Kopanya Selaoli sa Monyako oa Reader, Molaoli oa Lemati

Litšupiso

• Bukana ea Mosebelisi