KURZWEIL PC4 SC Performance Controller Keyboard
Rea qala
Tataiso ena e tla u fa mokhoa o potlakileng oa ho fetaview Setšoantšo sa PC4 SE. Bakeng sa lintlha tse ling, khoasolla Tataiso ea 'Mino oa PC4 SE ho www.kurzweil.com.
Litlhaloso tsa likarolo tsa PC4 SE
Melumo
• Theknoloji ea FlashPlay e sebelisang 2GB ea sesebelisoa sampho kenyeletsa:
• Optimized German D le Japanese C7 Pianos, Piano Triple Strike, 73 Electric Piano, Clavinets, Harpsichords, Celeste, Bowed and Hit Crotales, Vector Synthesis Waveforms
• Melumo e ntlafalitsoeng ea Rock, Synth le Orchestral ho tsoa ho Kurzweil's PC4, SP6, PC3, le KORE64
• Mekhahlelo e 10 ea Mananeo (Piano, E. Piano, Clav, Organ, Strings/Pad, Brass/Wind, Synth, Guitar/Bass, Drum/Perc, Misc)
• KSR: Kurzweil String Resonance (Piano String Resonance Simulation)
• Mananeo a piano a tšehetsa khetho ea Half-Damper pedal for half pedaling
• KB3 Organ ketsiso e nang le taolo ea 9 drawbar
• Enjene ea Kurzweil e tsebahalang haholo ea VAST Synthesis le FX
• FM: Mokhoa oa khale oa 6 oa opareitara FM
• Arpeggiator e nang le likonopo tsa On/Off le Tlanya Tempo (ho fihla ho tse 5 ka nako e le 'ngoe ho Multi Mode)
• CC Sequencer e nang le likonopo tsa On/Off le Tlanya Tempo (ho fihla ho 5 ka nako e le 'ngoe ho Multi Mode)
• Li-ID tsa Basebelisi tse fetang 4000 ho boloka Mananeo a hau le Multis
• Mantsoe a 256 a polyphony
• Likanale tse 16 tsa MIDI bakeng sa lits'ebetso tsa multitimbral Mokhoeng oa Lenaneo
• Lipina tse 16 tsa MIDI bakeng sa ho rekota Moeeng oa Pina
• 5 Zone MIDI Controller ho Multi Mode
Balaoli
• keybhoto ya dikonopo tse 88 e nang le boima bo felletseng e nang le maikutlo a kang piano
• Karolo ea taolo e nang le likonopo tse 5 tse ka abeloang, li-slider le likonopo
• Konopo e abetsweng Phapano
• Konopo ea EQ
• Likonopo tsa Transpose
• Karolo ea Arpeggiator e nang le likonopo tsa Arpeggiator Enable, Arpeggiator Latch, CC Sequencer Enable, le Tap Tempo
• Lebili la sekontiri
• abeloa modulo lebili
• 2 assignable switch pedal jacks (jack e 'ngoe le e 'ngoe e ka sebelisoa ka pedal e habeli ho fihla ho li-switches tse 4)
• jeke e le 'ngoe ea CC pedal jack
Qala ka Potlako
Etsa bonnete ba hore u hlahlobe Kurzweil website at www.kurzweil.com bakeng sa melumo e mecha, litokomane le liapdeite tsa software.
Ho theha PC4 SE
- Haeba keyboard ea hau ea PC4 SE e ntse e le serame nakong ea thomello, e fe nako ea ho futhumala ho fihlela mocheso oa kamore pele o e sebelisa, kaha ho ka etsahala hore ebe condensation e thehiloe ka hare.
- Beha PC4 SE setulong sa keyboard kapa sebakeng se thata, se bataletseng, se boemo bo holimo.
- Hokela adaptara ea motlakase ea DC ho jeko ea Matla ea PC4 SE DC.
- Etsa bonnete ba hore motlakase oa hau o lumellana le adaptara ea motlakase e kenyellelitsoeng, ebe o hokela thapo ea motlakase sebakeng sa motlakase.
- Hokela Switch Pedal e kenyellelitsoeng ho jeko ea SW1 (SUSTAIN) ho phanele e ka morao ea PC4 SE.
- Haeba u na le pedal e eketsehileng, e hokele ka har'a jack ea SW2 bakeng sa taolo ea Sostenuto.
- Haeba u na le pedal ea MIDI CC (eo hape e tsejoang e le polelo ea MIDI kapa pedal ea molumo), e hokele ho jeko ea CC (VOLUME) bakeng sa ho laola molumo.
- Haeba u sebelisa libui, theola molumo oa master ho theosa ho ea hau ampsefepi kapa se kopanyang. U sebelisa likhoele tsa molumo tse tloaelehileng (1/4-inch), qala ka ho hokela ka har'a li-jackets tsa hau amplifier kapa mixer, ebe o hokela pheletsong e 'ngoe ea likhoele ka har'a li-jacks tsa PC4 SE AUDIO OUT. (Ho hokahanya ka tatellano ena ho fokotsa monyetla oa ho senyeha ha static discharge.) Bakeng sa lets'oao la mono, sebelisa feela jack ea LEFT (MONO), 'me u tlohele jack ea RIGHT e sa kenngoa. Lithapo tse leka-lekaneng ("TRS" kapa "stereo") lia khothaletsoa haeba motsoako oa hau kapa amp e tshehetsa dikeno tse lekalekanang.
- Haeba u sebelisa li-headphones, hokela li-headphone jack le jack ea li-headphone karolong e ka morao.
- Tsamaisa PC4 SE VOLUME Slider ho ea tlase.
Ho kenya letsoho ho PC4 SE
1. Matla ho PC4 SE ka ho tobetsa konopo ea POWER karolong e ka morao e ka morao.
2. Haeba u sebelisa libui, phahamisa molumo oa hau ampsefepi kapa mokopanyi.
3. Phahamisa PC4 SE VOLUME Slider butle 'me u bapale lintlha ho lekola bophahamo ba molumo. (Haeba u na le CC pedal e hokeletsoeng jekong ea CC (VOLUME), etsa bonnete ba hore e setetsoe boemong bo phahameng ka ho fetisisa ba molumo).
4. Haeba u sebelisa libui 'me PC4 SE ha e lerata ho lekana, phahamisa molumo oa hau ampsefepi kapa mokopanyi.
5. Haeba u sebelisa motsoako 'me u utloe ho sotha, fokotsa boemo ba phaello ho motsoako, kapa sebelisa konopo ea Pad ea mixer haeba e e-na le eona (konopo eo ka tloaelo e fokotsang boemo ba ho kenya molumo ka 20 dB).
6. Ka mor'a ho sebelisa PC4 SE, haeba u sebelisa libui, fetola molumo oa master ho theosa ho ea hau ampLifier kapa motsoako pele o tima PC4 SE.
Auditioning PC4 SE Melumo
PC4 SE e qala ka Mokhoa oa Lenaneo. Sebelisa likonopo tsa NAVIGATION, ALPHA WHEEL, kapa likonopo tsa CATEGORY ho khetha Lenaneo le fapaneng. Sheba Melumo ea PC4 SE leqepheng la 14 bakeng sa lintlha tse ling mabapi le ho khetha Mananeo kapa Multis.
- Ho utloa pina ea Demo ea Lenaneo bakeng sa Lenaneo la hajoale, tobetsa konopo ea KEYPAD le ENTER ka nako e le 'ngoe.
- Ho utloa bokhoni ba PC4 SE, o ka bapala lipina tsa demo tsa likanale tse ngata. Tobetsa konopo ea KEYPAD le 0/MISC ka nako e le 'ngoe ho mamela pina ea li-channel tse ngata.
- Ho chencha lipakeng tsa Mananeo a tlhahlobo kapa a Multis, tobetsa konopo ea PROGRAM kapa MULTI Mode tlas'a leibole ea MODE ka letsohong le letona la pontšo.
Ho Boloka Matla ka Motlakase
PC4 SE e na le sesebelisoa sa ho boloka matla ka boiketsetso (Auto Power Off) se ka tima PC4 SE ka bo eona kamora nako ea ho se sebetse, molemong oa ho baballa motlakase. Karolo ea Auto Power Off e nolofalitsoe ke kamehla. Nako ea kamehla ea Power Off ke lihora tse 8, tse tla etsa hore PC4 SE e tima ka mor'a lihora tse 8 tsa ho se sebetse.
Temoso ea nako ea ho bala nako e tla hlahisoa skrineng metsotso e seng mekae pele PC4 SE e tima. Ka nako efe kapa efe, ho ama taolo efe kapa efe ea PC4 SE kapa ho bapala sengoloa ho tla etsa hore PC4 SE e lule e le matla, ho fihlela PC4 SE e se e sa sebetse bakeng sa nako e behiloeng ea Power Off.
Auto Power Off e ka tima ho Global Mode. The Power Off Time e ka boela ea fetoloa ho Global Mode.
Phanele e ka pele
BOLUMO Slider
VOLUME Slider e laola boemo ba molumo oa li-jacks tsa AUDIO OUT le HEADPHONE.
Pontšo
Pontšo ke sebopeho sa mantlha sa mosebelisi bakeng sa PC4 SE. Sebelisa pontšo ho view Lenaneo le Mabitso a mangata, likabelo tsa taolo, le mesebetsi ea ho hlophisa.
ALPHA LEBITANE
Ho Program le Multi-Mode, sebelisa ALPHA WHEEL ho tsamaea ka har'a Lenane la Lenaneo kapa la Multi.
Ho Program Editing kapa Multi-Edit Mode, sebelisa ALPHA WHEEL ho phenya lethathamong la litekanyetso bakeng sa parameter e khethiloeng hajoale. Fetolela ALPHA WHEEL khahlanong le oache kapa oache ho ea ho khetha boleng bo fetileng kapa bo latelang. Fetola LEbidi la ALPHA butle ho fetola boleng ka increment e le 'ngoe, kapa u le fetole kapele ho tlola li-increments tse 'maloa.
TSAMAEA Likonopo
Likonopo tsa NAVIGATION li tsamaisa cursor ponts'o 'me li u lumella ho khetha paramethara ea hajoale e lokelang ho hlophisoa.
Likonopo tsa MODE
Tobetsa likonopo tsa MODE ho fihlella PROGRAM, MULTI kapa GLOBAL Mode. Sheba Mekhoa leqepheng la 17 bakeng sa tlhaloso ea Mokhoa o mong le o mong.
CATEGORY Likonopo
Ho Mokhoa oa Lenaneo, likonopo tsa CATEGORY li u lumella ho khetha le ho bala Mananeo ka mekhahlelo e 10 ea lisebelisoa. Ho kenya konopo ea KEYPAD ho u fa monyetla oa ho sebelisa likonopo tsa CATEGORY joalo ka konopo ea alphanumeric. Konopo ea KEYPAD e lula e le ka Multi Mode, 'me moo ho hlokahalang bakeng sa ho hlophisa litekanyetso tsa parameter.
LITABA LIKOPITSO
Likonopo tsa FAVORITES li ka sebelisoa ho hopola hang-hang Mananeo ao u a ratang haholo le Multis. Ho abela lenaneo le khethiloeng hajoale kapa Multi ho konopo ea FAVORITES, tobetsa 'me u tšoare konopo e lakatsehang ea FAVORITES metsotsoana e seng mekae ho fihlela ponts'o e bontša hore eo u e ratang e bolokiloe. Tobetsa konopo ea FAVORITES ho khetha hang-hang Lenaneo le bolokiloeng kapa Multi.
BANK Likonopo
Likonopo tsa BANK li ka sebelisoa ho khetha libanka tse fapaneng tsa Mananeo a ratoang le Multis. Ho Program le Multi Mode, nomoro ea Banka e khethiloeng hajoale le lebitso li hlahisoa skrineng. Ho khetha Bank 1, tobetsa likonopo tse peli tsa BANK ka nako e le 'ngoe.
TRANSPOSE Likonopo
Likonopo tsa TRANSPOSE li ka sebelisoa ho fetola tokiso ea lintlha tse bapaloang k'homphieutheng ea PC4 SE ka li-semitones (tse tsejoang hape e le halofo ea mehato). Chelete ea hona joale ea transpose e bonts'oa skrineng. Tobetsa likonopo tse peli tsa TRANSPOSE ka nako e le 'ngoe ho khutlisetsa phetoho ho 0.
LEbidi la PICH LE MODUULATION WELI
Sebelisa lebili le leng le le leng ho etsa ho kobeha ha molumo kapa ho fetola palo ea molumo. MODULATION WHEEL e tla etsa modulation e abetsoeng bakeng sa Lenaneo le leng le le leng kapa Multi. Lebitso la kabelo ya jwale le bontshwa pontshong ha lebidi le tsamaiswa.
PHAPANG Konopo
Ho tobetsa konopo ea VARIATION ho tla etsa phapang e fanoeng bakeng sa Lenaneo le leng le le leng kapa Multi. Lebitso la kabelo ea hajoale le bonts'oa ponts'o ha konopo e tobetsoa.
Konopo ea VARIATION hangata e tla fetola molumo ka ho kenya karolo ea liletsa tsa 'mino oa liletsa kapa synth pad layer, kapa ho etsa hore ho be le phello.
Bakeng sa Mananeo a Organ a KB3, konopo ea VARIATION e laola lebelo la Rotary Speaker, e fetohang kapele le butle. Pontšo e bontša "KB3" ha ho khethoa Lenaneo la KB3.
TAOLI Karolo
Karolo ea CONTROL e sebelisoa ho laola mekhahlelo e fapaneng ea Lenaneo le Multi.
Ka Mokhoa oa Lenaneo: Li-knob, li-slider, le likonopo li laola motsoako le liparamente tsa FX bakeng sa Lenaneo la hajoale. Likabelo tsa taolo li ka fetoloa kapa tsa hlophisoa ho li-parameter tse ka abeloang mosebelisi ho Mode oa Edita oa Lenaneo.
Ka Multi Mode: Li-knob, li-slider, le likonopo hangata li laola bophahamo ba Zone, synthesis le liparamente tsa FX bakeng sa Multi ea hajoale. Likabelo tsa taolo li ka fetoloa kapa tsa hlophisoa ho li-parameter tse ka abeloang basebelisi ho Multi Edit Mode.
Ka Lenaneo le Mekhoa e mengata: Ha KB3 Organ Program e khethoa, likotola le li-slider li sebetsa joalo ka Organ drawbar, 'me likonopo li laola mesebetsi e fapaneng ea Organ. Pontšo e bontša "KB3" ha ho khethoa Lenaneo la KB3.
Konopo ea EQ
Maqepheng a sehlooho a Lenaneo le Multi Mode, bulela konopo ea EQ ho view le ho laola liparamente tsa Master FX, tse ka sebelisang EQ le compression ho audio eohle e hlahisoang ke PC4 SE.
Neng viewho li-parameter tsa Master FX, sebelisa konopo ea Switch 1 ho nolofalletsa / ho tima Master EQ, 'me u sebelise Li-Knobs tse 4 tsa pele karolong ea OLAOLI ho laola li-parameter tse 4 skrineng sa Master EQ.
Neng viewho li-parameter tsa Master FX, sebelisa Knob 5 karolong ea LAOLI ho laola Master Compressor. Ha konopo e theohile, kompressor ea holofala. Phahamisa knob holimo ho nolofalletsa compressor le ho eketsa palo ea khatello.
Hlokomela: Ho seta li-setting tsa rona tsa Master FX e le li-setting tsa kamehla tse tla sebelisoa ha PC4 SE e buletsoe, u tlameha ho kena le ho tsoa Mode ea Global, kapa u khethe li-setting tse lakatsehang leqepheng la Global Mode Master FX, ebe u tsoa Mode ea Global ho boloka li-setting e le. mefokolo.
Neng viewho leqephe la Global mode Master FX, bulela konopo ea EQ ho laola li-parameter ka karolo ea CONTROL likonopo le likonopo tse hlalositsoeng ka holimo.
Tima konopo ea EQ ho khutlisetsa likonopo le likonopo tsa karolo ea CONTROL ho Lenaneo la bona kapa likabelo tse ngata.
Karolo ea ARPEGGIATOR
Sebelisa likonopo tsa ARP le LATCH ho laola PC4 SE's Arpeggiator.
Sebelisa konopo ea CC SEQ ho bulela kapa ho tima CC Sequencer.
Sebelisa konopo ea TAP TEMPO ho seta tempo ea Arpeggiator le CC Sequencer, sekhahla sa tempo synced FX (e kang Delay), kapa tempo ea Multi or Song ea hona joale. Ho seta tempo, tobetsa konopo ea TAP TEMPO makhetlo a 'maloa ka sekhahla seo u se batlang. U ka boela ua seta tempo ka ho tobetsa konopo ea TAP TEMPO, ebe u lokisa tempo ka ALPHA WHEEL, kapa ka ho sebelisa likonopo tsa KEYPAD ho thaepa boleng ba linomoro tse lateloang ke ho tobetsa ENTER.
Likonopo tsa SPLIT le LAER
Sebelisa konopo ea SPLIT ho theha Multi ka potlako moo linotlolo tsa mefuta e fapaneng ea keyboard li bapalang melumo e fapaneng ea liletsa.
Sebelisa konopo ea LAYER ho theha Multi ka potlako moo melumo e fapaneng ea lisebelisoa e kenngoeng ka har'a mefuta e le 'ngoe ea linotlolo, e le hore linotlolo tsa letoto le le leng la keyboard li bapale melumo e mengata ea liletsa ka nako e le 'ngoe.
Ts'ebetso ea Split le Layer e u lumella ho theha Multis kapele ntle le ho sebelisa Multi Edit Mode ho hlophisa mekhahlelo ea linotlolo tsa Zone, Mananeo le meqolo. Kamora ho theha le ho boloka Split kapa Layer Multi, o ka hlophisa liparamente tse ling tse ngata ka mokhoa oa Multi Edit.
BOLOKA le ho EDISA Likonopo
Likonopo tsena li sebelisoa ha u hlophisa Mananeo kapa Multis ho theha melumo ea Basebelisi. Ho Mokhoa oa Lenaneo, tobetsa konopo ea SAVE ho boloka Lenaneo la Mosebelisi ka li-setting tsa selaolo sa hajoale.
TSOA Konopo
Ho Lenaneo la ho Fetola, Multi-Mode, kapa Global Mode, tobetsa konopo ea EXIT ho khutlela ho Mokhoa oa Lenaneo. Ka Multi-Edit Mode, tobetsa konopo ea EXIT ho khutlela ho Multi-Mode.
USER Konopo
Tobetsa 'me u nolofalletse konopo ea USER ho fihlella Mananeo a Basebelisi a bolokiloeng nakong e fetileng kapa Multis. Tobetsa le ho tima konopo ea USER ho fihlella Mananeo kapa Multis (Fektheri le Mosebelisi).
Likonopo tsa CHANNEL/PAGE
Sebelisa likonopo tsa CHANNEL/PAGE ho fetola mocha oa hajoale oa MIDI ho Mokhoa oa Lenaneo, kapa leqephe la hajoale ho Program Edita, Multi Edit, kapa Global Mode.
Karolo e ka morao
Konopo ea MATLA
Tobetsa konopo ea POWER ho matlafatsa kapa ho tima PC4 SE.
DC Matla Jack
Hokela adaptara ea motlakase e kenyellelitsoeng ka har'a jeke ea DC Power.
Li-port tsa USB
Sebelisa likou tsa USB ho hokela PC4 SE ho komporo / tablet kapa USB hard drive ho etsa tse latelang:
• Sebelisa PC4 SE e le selaoli sa MIDI ho bapala lisebelisoa tsa software khomphutang/tablet.
• Bapala le ho laola PC4 SE ka selaolo sa USB MIDI.
• Sebelisa komporo/ tablet ho tatellana lipina tsa likanale tse ngata ho PC4 SE.
• Boloka le ho tsosolosa Mananeo a Basebedisi le Multis ho hard drive ya USB.
• Nchafatsa software le melumo ea PC4 SE.
MIDI IN le OUT Maemakepe
Sebelisa likou tsa MIDI ho buisana le li-module le lilaoli tse ling tsa MIDI. Boema-kepe ba OUT ke boema-kepe ba MIDI, 'me boema-kepe ba IN ke boema-kepe bo amohelang MIDI.
Ho sebelisa PC4 SE e le selaoli sa MIDI bakeng sa mojule o mong oa molumo, sebelisa thapo ea MIDI ho hokela boema-kepe ba PC4 SE's MIDI OUT koung ea MIDI ea mojule oo u batlang ho o laola.
Ho laola PC4 SE ka ho sebelisa selaoli se seng sa MIDI, sebelisa thapo ea MIDI ho hokela boema-kepe ba PC4 SE's MIDI IN boema-kepeng ba MIDI ba taolo eo u tla beng u e sebelisa.
Hlahisa Knob ea Khanya
Sebelisa ponts'o ea "Brightness knob" ho laola khanya ea ponahatso.
SW1 (SUSTAIN) le SW2 Jacks
Sebelisa lijeke tsa SW1 (SUSTAIN) le SW2 ho hokahanya lipedali tsa switjha. Switch pedal e le 'ngoe e kenyelelitsoe le PC4 SE.
Ho Mokhoa oa Lenaneo, SW1 (SUSTAIN) e ea ho ho laola Sustain, 'me SW2 e sa sebetse ho laola Sostenuto. (Bakeng sa KB3 Organ Programs, SW1 (SUSTAIN) e ikhethela ho laola lebelo la Rotary Speaker, e fetohang pakeng tsa lebelo le butle. Mosebetsi ona o ka fetoloa ho Global Mode. Pontšo e bontša "KB3" ha ho khethoa Lenaneo la KB3.)
Ho Multi Mode, likabelo tsa pedal li ka fapana ho ea ka Multi. Likabelo tsa Pedal li ka fetoloa bakeng sa Zone ka 'ngoe ka ho sebelisa Multi Edit Mode.
Global Mode e ka sebelisoa ho seta li-pedal overrides, tse ka fetolang likabelo tsa pedal bakeng sa Mananeo ohle le Multis.
Hlokomela: Li-pedals tsa switjha li tlameha ho hokeloa pele li kenya matla ho PC4 SE. U se ke ua hatakela li-switches pedals ha u kenya matla ho PC4 SE, kaha boemo ba li-pedals bo bonoa e le karolo ea tatellano ea ho qala.
Li-Pedals tsa ho fetola tse peli
Li-jacks tsa SW1 (SUSTAIN) le SW2 li ka hokeloa ho li-pedals tse peli (2 pedals per Jack), e leng se lumellang hore ho sebelisoe lipedali tse nne. Li-pedals tse lumellanang li lokela ho sebelisa polaka e le 'ngoe ea 1/4 inch tip-ring-sleeve plug. (Li-pedals tse peli tsa switjha tse le 'ngoe le tsona li ka hokeloa ka jekong e le 'ngoe ka ho sebelisa stereo ea 1/4 inch (e motona) ho isa ho thapo e arohaneng ea mono (ea basali) e arohaneng, aka TRS to dual TSF).
Li-Pedals tse hoketsoeng ka jekong ea SW1 (SUSTAIN) li bitsoa SW1a le SW1b, 'me lipedali tse hoketsoeng ka jekong ea SW2 li bitsoa SW2a le SW2b. Ho Program Mode mesebetsi ea kamehla ke:
| SW1a | Ntlafatsa |
| SW1b | Sostenuto |
| SW2a | Sostenuto |
| SW2b | Bonolo ba bebofatsa |
Ho etsisa lipedalile tse 3 tsa piano ea acoustic, hokela pedali ea switjha e le 'ngoe ka har'a jeko ea SW1 (SUSTAIN), le pedal e habeli ho jeko ea SW2.
Continuous Switch Pedals (Half-Damper)
Jack ea SW1 (SUSTAIN) e boetse e tsamaisana le li-pedals tse tsoelang pele (Half-D).amper) tse sebelisang plug ea 1/4 inch tip-ring-sleeve (joalo ka Kurzweil KP-1H). Ha e hokahantsoe le jeko ea SW1 (SUSTAIN), Half Damper pedal e nolofalletsa taolo e ntle ea Sustain ho feta pedal e tloaelehileng ea switjha. Half Damptaolo ea er e lumelletsoe Mananeo a sehlopha sa piano. Mananeo a kantle ho sehlopha sa piano a tla araba Half Damper pedal joalo ka ha eka ke pedal e tloaelehileng ea switjha.
CC (VOLUME) Jack
Sebelisa jeko ea CC (VOLUME) ho hokela pedal ea MIDI CC (eo hape e tsejoang e le polelo ea MIDI kapa pedal ea molumo). Ka nako e sa lekanyetsoang, pedal ena e abeloa ho laola Program le Multi volume (pre-FX).
Bakeng sa KB3 Organ Programs, CC (VOLUME) pedali e laola setho sa 'mele. Ho ruruha ha setho ho tšoana le molumo oa Lenaneo, ntle le hore molumo o ke ke oa theoleloa ho fihlela o khutsitse. Pontšo e bontša "KB3" ha ho khethoa Lenaneo la KB3.
Bakeng sa Multis Multis, CC pedal e ka abeloa mosebetsi o fapaneng bakeng sa Sebaka ka seng ka ho sebelisa Multi Edit Mode.
Mokhoa oa boikhethelo oa Kurzweil CC-1 o tsoelang pele oa taolo o tla sebetsa hantle ka PC4 SE, empa hape hoa khoneha ho sebelisa lipedali tsa taolo tse tsoelang pele tsa motho oa boraro tse etselitsoeng likonopo. Lipedali tse tsamaellanang li lokela ho sebelisa potentiometer ea 10 kΩ linear-taper, e nang le polaka ea 1/4 inch tip-ring-sleeve (stereo) e nang le seipi e hokeletsoeng ntlheng.
AUDIO OUT LE LETSATSI (MONO) le Li-Jacks tse ka HO TLOHA
Sebelisa lijeke tsa AUDIO OUT ho hokela ho ampsefepi kapa se kopanyang. Sheba Qalo e Potlakile leqepheng la 3 bakeng sa lintlha.
SEHLOOHO Jack
Sebelisa jack ea HEADPHONE e ka lehlakoreng le letšehali la sesebelisoa ho mamela PC4 SE ka li-headphone tsa stereo. U tla hloka adaptara ea 1/8-inch-to-1/4-inch ho sebelisa li-headphone tse nang le sehokelo se senyenyane sa plug e nyane.
Ha li-headphone li kentsoe, molumo o ntse o fetisoa ho tsoa ho li-jacks tsa AUDIO OUT.
Melumo ea PC4 SE
PC4 SE e na le Mananeo le Multis. Lenaneo hangata ke molumo oa seletsa se le seng joalo ka Piano, Organ, kapa Synth. Mananeo a hlophisitsoe ka mofuta oa lisebelisoa ka mekhahlelo e 10.
A Multi ke motsoako oa Mananeo a hlophisitsoeng ka mekhahlelo le/kapa a arotsoe ka har'a keyboard. Multis ha e arotsoe ka mofuta oa sesebelisoa, kahoo konopo ea KEYPAD e lula e le teng ha e le Multi Mode.
Ho khetha Mananeo
Ho Lenaneo la Lenaneo, sebelisa mekhoa efe kapa efe e ka tlase ho khetha Lenaneo.
Browse All Programs
Etsa bonnete ba hore konopo ea USER e koetsoe, ebe u sebelisa likonopo tsa ALPHA WHEEL kapa NAVIGATION ho khetha Lenaneo ho Mananeo ohle a teng.
Khetha Lenaneo ka Sehlopha
Etsa bonnete ba hore konopo ea KEYPAD e koetsoe, ebe u tobetsa e 'ngoe ea likonopo tsa CATEGORY ho khetha Lenaneo la pele la sehlopha (kapa Lenaneo la hona joale la Sehlopha se Ikemetseng). Konopo e khethiloeng ea CATEGORY e tla bulela. Sebelisa likonopo tsa ALPHA WHEEL kapa NAVIGATION ho khetha Mananeo ho tsoa sehlopheng se khethiloeng.
Khetha Lenaneo la Basebelisi le Bolokiloeng Pele
Tobetsa 'me u bulele konopo ea USER, ebe u sebelisa likonopo tsa ALPHA WHEEL kapa NAVIGATION ho sheba feela Mananeo a Basebelisi. Ho khutlela ho fektheri ea ho bala le ho Mananeo a Basebelisi, tobetsa 'me u koale konopo ea USER.
Khetha Lenaneo ka Nomoro ea ID
Tobetsa 'me u bulele konopo ea KEYPAD. Konopo ea KEYPAD e u lumella ho sebelisa linomoro tse ngotsoeng ho CATEGORY ho khetha Mananeo kapa Multis ka nomoro ea ID. Tlanya nomoro ea ID e lateloang ke ho tobetsa konopo ea ENTER ho khetha Lenaneo le amanang.
Kgetha Lenaneo le Ipeheletsoeng la Sehlopha
Sehlopha se seng le se seng se na le Lenaneo la Tlhophiso ea Sehlopha (Lenaneo le khethiloeng ha konopo e 'ngoe le e 'ngoe ea CATEGORY e tobetsoa). Ka nako e sa lekanyetsoang, Lenaneo le Ikhethileng la Sehlopha le behiloe Lenaneong la pele la sehlopha ka seng. Ho seta Lenaneo le Ikhethileng la Sehlopha se fapaneng, khetha Lenaneo, etsa bonnete ba hore konopo ea KEYPAD e koetsoe, ebe o tobetsa o tšoare konopo ea CATEGORY e khantšitsoeng hajoale.
Ho khetha Multis
Ho Multi Mode, sebelisa efe kapa efe ea mekhoa e ka tlase ho khetha Multi.
Browse All Multis
Etsa bonnete ba hore konopo ea USER e koetsoe, ebe u sebelisa likonopo tsa ALPHA WHEEL kapa NAVIGATION ho khetha Multis ho Li-multis tse fumanehang.
Khetha Multi by ID Nomoro
Konopo ea KEYPAD e u lumella ho sebelisa linomoro tse ngoliloeng ho likonopo tsa CATEGORY ho khetha Multis by ID number. Sebelisa likonopo tsa CATEGORY ho thaepa nomoro ea ID e lateloang ke ho tobetsa konopo ea ENTER. Li-multis ha li hlophisoe ka lihlopha, kahoo konopo ea KEYPAD e lula e le ka Multi Mode.
Khetha Mosebelisi ea Bolokileng Nakong e Fetileng
Tobetsa 'me u bulele konopo ea USER, ebe u sebelisa likonopo tsa ALPHA WHEEL kapa NAVIGATION ho sheba feela Multis Multis. Ho khutlela fekthering ea ho bala le ho Multis Users, tobetsa 'me u koale konopo ea USER.
Balaoli
The Knobs, Slider, Buttons, Wheels, le Pedals li ka laola e 'ngoe le e' ngoe ea Mananeo a Fektheri le Multis, ho hlahisa mefuta e fapaneng ea molumo. Se ke oa lebala ho leka tsena ha u ntse u hlahloba melumo ea fektheri ho PC4 SE.
Ka kakaretso, taolo e 'ngoe le e' ngoe e tla etsa mosebetsi o ngotsoeng karolong e ka pele, leha litsamaiso tse ling li ka ba le likabelo tse fapaneng ho Lenaneo kapa Multi. Ha selaoli se tsamaisitsoe, lebitso la kabelo ea hajoale le bonts'oa ponts'o. Likabelo tsa taolo li ka fetoloa ho Lenaneo le Multi Edit Mode.
Tse ratwang
Sebelisa likonopo tsa FAVORITES ho boloka le ho hopola kapele letoto la Mananeo a 5 ao u a ratang haholo le/kapa Multis ha u ntse u le Lenaneong kapa Mekhoa e Mengata.
Ho hopola Lenaneo leo u le ratang kapa Multi, tobetsa feela konopo e 'ngoe ea FAVORITES. Likonopo tsa FAVORITES li sebetsa ho tsoa ho Program kapa Multi Mode, 'me ho tobetsa konopo ea FAVORITES ho tla u tlisa ka bohona ho Mokhoa oa Lenaneo kapa Multi Mode ha ho hlokahala.
Ho abela lenaneo le khethiloeng hajoale kapa Multi ho konopo ea FAVORITES, tobetsa 'me u tšoare konopo e lakatsehang ea FAVORITES metsotsoana e seng mekae ho fihlela ponts'o e bontša hore eo u e ratang e bolokiloe.
Likonopo tsa BANK li ka sebelisoa ho khetha libanka tse fapaneng tsa Mananeo a ratoang le Multis. Ho Program le Multi Mode, nomoro ea Banka e khethiloeng hajoale le lebitso li hlahisoa skrineng. Ho khetha Bank 1, tobetsa likonopo tse peli tsa BANK ka nako e le 'ngoe.
Likhahla le Mekhahlelo
Mosebetsi oa Split le Layer o ka sebelisoa ho Arola kapa ho Rala Lenaneo la hajoale kapa Multi. Libaka tse fapaneng tsa keyboard li ka bapala Mananeo a fapaneng, kapa Mananeo a mangata a ka bapaloa sebakeng se le seng. Ho Arola kapa ho Rala Multi, e tlameha ho ba le bonyane Sebaka se le seng se sa sebelisoeng (Off).
Ho Program kapa Multi Mode, tobetsa likonopo tsa SPLIT kapa LAER ho view Leqephe la Arohano / Lera. Joale u tla khona ho hlophisa Mananeo a mang a fihlang ho a mararo ho theha a Split or Layered Multi e nang le Mananeo a ka bang mane.
Tobetsa konopo ea SAVE hang ho view the Save Dialog. Save Dialog e u fa monyetla oa ho khetha nomoro ea ID le lebitso bakeng sa Split/Layer Multi eo u e bolokang. Sebelisa likonopo tsa CHANNEL/PAGE ho chencha lipakeng tsa khetho ea ID le maqephe a mabitso. Leqepheng la Multi Save, tobetsa konopo ea SAVE hape ho boloka Split/Layer Multi.
Kamora ho boloka Split kapa Layer e le Multi, litlhophiso tse ling tsa Multi Controller le FX li ka hlophisoa ka Multi Edit Mode.
Mekhoa
Lenaneo la Mokhoa
PC4 SE e lula e sebetsa ka Mokhoa oa Lenaneo, moo molumo oa seletsa se le seng o ka bapaloang ka kotloloho ho tsoa ho keyboard, kapa multitimbrally ka MIDI.
Ho boloka Mananeo
Haeba u etsa liphetoho Lenaneong la hajoale u sebelisa lilaoli life kapa life (Liknopu, Li-Slider, Likonopo, Mabili), konopo ea SAVE e tla bula ho bontša hore ho entsoe phetoho Lenaneong leo.
Ho boloka kopi ea Lenaneo le liphetoho tseo u li entseng, tobetsa konopo ea SAVE hang ho view the Save Dialog. Save Dialog e u fa monyetla oa ho khetha nomoro ea ID le lebitso la Lenaneo leo u le bolokang. Sebelisa likonopo tsa CHANNEL/PAGE ho chencha lipakeng tsa khetho ea ID le maqephe a mabitso. Leqepheng la ho Boloka Lenaneo, tobetsa konopo ea SAVE hape ho boloka Lenaneo joalo ka Lenaneo la Basebelisi.
Mokhoa oa ho Fetola Lenaneo
Lenaneo la ho Fetola Mokhoa o u lumella ho lokisa maemo a hajoale a Lenaneo la Arpeggiator, khetha li-parameter bakeng sa balaoli ba abeloang, 'me u lokise liparamente tse ling tsa Lenaneo. Sheba ka holimo bakeng sa lintlha tse mabapi le ho boloka Lenaneo le hlophisitsoeng joalo ka Lenaneo la Basebelisi.
Multi Mode
Multi Mode e u lumella ho bapala Multis, e leng litlhophiso tsa ho fihla ho Mananeo a 5 a arohaneng le/kapa a arotsoe ka Libaka ho pholletsa le mefuta e khethiloeng ea keyboard. Bophahamo ba Lenaneo sebakeng se seng le se seng bo ka fetoloa habonolo ha u ntse u bapala ka ho sebelisa li-slider, 'me Sebaka ka seng se ka buloa kapa sa tima ka ho sebelisa likonopo tse ka tlase ho li-slider tsena.
Litlhophiso tsa taolo li ka fetoloa ho Multi Edit Mode.
Multi Edit Mode
Multi Edit Mode e sebelisetsoa ho fetola li-parameter tse ngata tse etsang Multis, ho kenyelletsa le Khetho ea Lenaneo, Lebelo la Bonolo, Bolumo, Pan, le likabelo tsa Controller. Sebelisa Multi Edit Mode ho theha motsoako oa molumo o tloaelehileng.
Ho boloka kopi ea Multi ka liphetoho tseo u li entseng, tobetsa konopo ea SAVE hang ho view the Save Dialog. Save Dialog e u lumella ho khetha nomoro ea ID le lebitso bakeng sa Multi eo u e bolokang. Sebelisa likonopo tsa CHANNEL/PAGE ho chencha lipakeng tsa khetho ea ID le maqephe a mabitso. Leqepheng la Multi Save, tobetsa konopo ea SAVE hape ho boloka Multi as a User Multi.
Boemo ba Lefatše
Sebelisa Global Mode ho lokisa li-setting tse tloaelehileng tse arolelanoang lipakeng tsa Mekhoa eohle, joalo ka kutloisiso ea lebelo le likhetho tsa ho boloka matla. Global Mode e boetse e sebelisetsoa ho boloka kapa ho kenya bekapo ea basebelisi files, le ho khutlisetsa litlhophiso tsa kamehla tsa Factory. Tse ling tsa litlhophiso tse tloaelehileng li akaretsoa ka tlase.
Info
Leqephe la Info le bonts'a sistimi ea ts'ebetso e kentsoeng hajoale le mefuta ea ntho e utloahalang. Sebelisa leqephe lena ho lekola hore na PC4 SE ea hau e nakong ka software ea morao-rao le melumo e behiloeng ho www.kurzweil.com.
Seta bocha
U ka khutlisetsa PC4 SE sebakeng sa kamehla sa Feme ka ho etsa Reset.
Tlhokomeliso: Ho seta bocha ho tla hlakola lintho TSOHLE tsa Basebelisi, kahoo ho bohlokoa ho boloka lintho tsa Mosebelisi pele u etsa Reset. Lintho tsa feme ha li hlakoloe.
Ho Boloka Bobolokelong bo Ntle
Mananeo le Multis tseo o li entseng li ka bolokoa ho USB Flash Drive.
Loading from External Storage
Mananeo le Multis li ka kenngoa ho PC4 SE ho tsoa ho USB Flash Drive. Sena se o lumella ho kenya melumo e mecha ho tsoa ho Kurzweil kapa bahlahisi ba bang, kapa ho kenya melumo eo u e bolokileng pele.
Seta bocha Transposition
Ho seta bocha Lenaneo la hajoale kapa Phetolelo ea Multiple ho 0, ka nako e le 'ngoe tobetsa ka bobeli likonopo tsa TRANSPOSE -/+.
Demo ea lenaneo
Ho Mokhoa oa Lenaneo, ho utloa pina ea Demo ea Lenaneo bakeng sa Lenaneo la hajoale, tobetsa likonopo tsa KEYPAD le ENTER ka nako e le 'ngoe.
Pontšo ea Pina
Ho utloa bokhoni ba PC4 SE, o ka bapala lipina tsa demo tsa likanale tse ngata. Tobetsa konopo ea KEYPAD le 0/MISC ka nako e le 'ngoe ho mamela pina ea li-channel tse ngata.
Tshabo
Ho tobetsa likonopo tsa 0/MISC le ENTER ka nako e le 'ngoe ho tima linoto tsohle tse lerata ka ho romela molaetsa oa "linoto tsohle" ho liteishene tsohle tse 16 tsa MIDI.
Khetha Channel / Leqephe la 1
Ho Mokhoa oa Lenaneo, ho tobetsa likonopo tse peli tsa CHANNEL/PAGE ka nako e le 'ngoe ho tla khetha mocha oa MIDI 1.
Ho Lenaneo la Edita Mode, Multi Edit Mode, Global Mode le Song Mode, ho tobetsa likonopo tse peli tsa CHANNEL/PAGE ka nako e le 'ngoe ho tla khetha Leqephe la 1.
Khetha ID e latelang e sa sebelisoeng
Ha u khetha nomoro ea ID ho boloka ntho ea mosebelisi e bolokiloeng nakong e fetileng, tobetsa konopo ea NAVIGATION ka ho le letšehali/ ho le letona ka nako e le 'ngoe ho tlola lipakeng tsa ho khetha nomoro ea ID e sebelisitsoeng pele, le nomoro e latelang ea ID e sa sebelisoeng.
Search
Leqephe la Batla le u lumella ho fumana lentsoe kapa letoto la litlhaku ka har'a lethathamo le khethiloeng hajoale kapa mefuta ea boleng. Tšoara konopo ea ENTER ebe o tobetsa e 'ngoe ea likonopo tsa linomoro 0-9 ho view leqepheng la Batla.
Leqepheng la ho batla, sebelisa likonopo tsa lihlopha ho ngola lentsoe leo u batlang ho le fumana, ebe u tobetsa ENTER ho batla. Bakeng sa mohlalaample, haeba lenane la mananeo le khethiloe 'me u batla ho fumana mananeo ohle a nang le lentsoe "Horn," u tla thaepa lenaka le lateloa ke konopo ea ENTER. Leqephe la Batla ha le na taba-bonyane; e tla fumana litlhaku tse kholo le tse nyane ho sa tsotelehe hore na u ngola eng.
Ka mor'a ho thaepa lentsoe le ho tobetsa konopo ea ENTER, leqephe la ho batla le fumana le ho khetha mohlala oa pele oa lentsoe lethathamong (haeba le le teng lethathamong). Ho fumana le ho khetha mohlala o latelang kapa o fetileng oa lentsoe lenaneng, tšoara konopo ea ENTER ebe o tobetsa e 'ngoe ea likonopo tsa BANK -/+ ho batla ntho e fetileng e nang le linomoro tse tlase kapa e latelang e nang le mantsoe a holimo.
Hlokomela: Motsoako o mong le o mong oa konopo ea ENTER le konopo ea linomoro 0-9 e u lumella ho boloka lentsoe le fapaneng la ho batla. Bakeng sa mohlalaample, tšoara konopo ea ENTER ebe o tobetsa konopo ea 1, ebe u batla lentsoe le kang "piano". Lentsoe "piano" joale le tla fumaneha neng kapa neng ha u tšoara konopo ea ENTER ebe u tobetsa konopo ea 1. E latelang, tšoara konopo ea ENTER ebe u tobetsa konopo ea 2, ebe u batla "khoele". Poleloana "khoele" e se e tla fumaneha neng kapa neng ha u tšoara konopo ea ENTER ebe o tobetsa konopo ea 2. Lentsoe le fapaneng le ka bolokoa bakeng sa konopo ka 'ngoe ea linomoro 0-9. Mantsoe ana a bolokiloe ho fihlela motlakase o tima.
Litokomane / Lisebelisoa
 |
KURZWEIL PC4 SC Performance Controller Keyboard [pdf] Bukana ea Mosebelisi PC4 SC, Keyboard Controller |
