Kinco MT100E HMI Touch Screen
Tlhahisoleseding ya Sehlahiswa
MT100/MT100E HMI ke mochine oa batho o entsoeng ke Kinco Electric (Shenzhen) Ltd. E etselitsoe ho sebelisoa libakeng tsa indasteri 'me e fana ka li-interfaces tse sa tšoaneng tsa kantle bakeng sa khokahanyo.
- Mocheso o sebetsang: MT100/MT100E HMI e ka sebetsa ka mokhoa o tsitsitseng libakeng tse ngata tsa indasteri.
- Tlhokomeliso ea Kemiso:
- Qoba ho sebelisa HMI libakeng tse nang le khanya ea letsatsi, mocheso o feteletseng le mongobo, liphetoho tsa mocheso tse bakang condensation, likhase tse senyang kapa tse tukang, lerōle le feteletseng, litšila, letsoai, phofo ea tšepe, metsi, oli, lithethefatsi, ho thothomela ka ho toba kapa ho makala.
- Mehato ea ts'ireletso e lokela ho nkuoa libakeng tse nang le lerata la electrostatic kapa le leng, libaka tse matla tsa makenete ea motlakase, ho pepesehela mahlaseli, kapa haufi le mehloli ea motlakase.
- Tlhokahalo ea Matla:
- Keletso voltage: DC10.8 V ho DC28V.
- Netefatsa sebaka se lekaneng pakeng tsa HMI le li-converter kapa phepelo ea motlakase ea switch mode.
- Sebelisa likhoele tse sirelelitsoeng bakeng sa likhokahano tsa ho kenya le ho tsoa tsa lisebelisoa tse amanang le ho hokela marang-rang a sireletsang fatše.
- Arola matla a DC le matla a AC.
- U se ke ua sebelisa matla a tloaelehileng ka mojaro oa maikutlo kapa potoloho ea ho kenya ea molaoli.
- Tlhaloso ea Kemiso:
- HMI e kentsoe ka mokoting o kentsoeng hantle oa phanele ea lebokose la taolo ea mochini ho sebelisoa li-screws tse kentsoeng ka morao ho phanele.
- Torque e khothalletsoang ea senotlolo ke 0.5Nm ho netefatsa hore e thibela metsi le ho qoba ho senyeha ha khetla.
- Li-interface tsa Kantle:
- MATLA: Kenyelletso ea DC24V le liteishene tsa GND le FG.
- COM0/COM2: 9-pin e motona, sebopeho sa D-SUB se tšehetsang mesebetsi ea puisano ea RS232/485/422.
- COM1: 2-pin e motona, sebopeho sa D-SUB se tšehetsang mesebetsi ea puisano ea RS485.
- USB HOST: Sehokelo sa USB bakeng sa ho hokela keyboard ea USB, toeba, liprinta, le li-disk tsa U bakeng sa ho kenya / ho khoasolla le ho boloka data.
- USB LEKHOBA: Khokahano ea MicroUSB bakeng sa ho hokela komporo ho jarolla lenaneo la tlhophiso ea mosebelisi le ho seta liparamente tsa sistimi ea HMI.
- Hlokomela: Sehokelo sa USB HOST le sebopeho sa USB SLAVE li arolelana nako.
Litaelo tsa Tšebeliso ea Sehlahisoa
Ho sebelisa MT100/MT100E HMI, latela litaelo tsena:
- Netefatsa hore mocheso o sebetsang o ka har'a sebaka se boletsoeng 'me u qobe ho sebelisa HMI libakeng tse sa lokelang (joalokaha ho boletsoe lengolong la ho kenya).
- Fana ka matla a hlokahalang ka ho hokahanya phepelo ea motlakase ea DC ka har'a voltage fapaneng ea DC10.8 V ho DC28V. Etsa bonnete ba hore u boloka sebaka se lekaneng ho tloha ho li-converter kapa ho fetola lisebelisoa tsa motlakase. Sebelisa lithapo tse sirelelitsoeng bakeng sa likhokahano tsa ho kenya le ho tsoa 'me u netefatse hore mobu o lutse hantle.
- Kenya HMI ka ho e kenya ka mokhoa o sireletsehileng ka sekoting se kentsoeng hantle holim'a phanele ea lebokose la mochine o sebelisang torque e khothalletsoang ea senotlolo sa 0.5Nm bakeng sa likurufu tsa ho lokisa.
- Hokela lisebelisoa kapa litsamaiso tsa kantle ho lihokelo tse loketseng:
- Bakeng sa khokahanyo ea MATLA, hokela kenyelletso ea DC24V ho Pin 1, GND ho Pin 2, le FG ho Pin 3.
- Bakeng sa khokahano ea COM0/COM2, sheba tafole ea kabelo e fanoeng 'me u hokele matšoao a hlokahalang ka nepo.
- Bakeng sa khokahanyo ea COM1, sheba mosebetsi o fanoeng oa phini 'me o hokele matshwao a hlokehang.
- Bakeng sa khokahano ea USB HOST, sebelisa sebopeho sa USB ho hokela keyboard ea USB, mouse, liprinta, kapa li-disk tsa U bakeng sa ho kenya / ho khoasolla le ho boloka data.
- Bakeng sa khokahanyo ea USB SLAVE, sebelisa sebopeho sa MicroUSB ho hokela PC bakeng sa ho jarolla mananeo a tlhophiso ea basebelisi le ho beha liparamente tsa sistimi ea HMI.
Ka kopo, sheba bukana e felletseng ea mosebelisi bakeng sa tlhaiso-leseling e felletseng mabapi le ho hlophisa le ho sebelisa MT100/MT100E HMI.
Tlhokomeliso
Tlhokahalo ea Tikoloho
- Mocheso o sebetsang: MT100/MT100E HMI e ka sebetsa ka mokhoa o tsitsitseng libakeng tse ngata tsa indasteri hore mocheso o pakeng tsa 32°F to122°F (0~50°C).
- NEMArating: Sehlopha sena se ka pele sa Letoto la HMI ke lintlha tsa NEMA 1.
Ka kopo u se ke ua sebelisa libakeng tse latelang:
- Libaka tse tobileng letsatsing
- Mocheso o potolohileng le mongobo o fetang litekanyo
- Libaka tsa mocheso o fetoha haholo mme o baka condensation habonolo
- Libaka tse nang le khase e senyang le khase e tukang
- Libaka tse nang le lerole le lengata, litšila, letsoai le phofo ea tšepe
- Libaka tse tla fafatsoa ka metsi, oli le lithethefatsi
- Libaka tse tlisang thothomelo le ts'oso ho moamoheli
Ka kopo, nka mehato ea ho itšireletsa libakeng tse latelang:
- Libaka tse teng electrostatic kapa mefuta e meng ea lerata
- Libaka tse matla tsa motlakase
- Libaka tse ka pepesetsoang mahlaseli
- Libaka tse haufi le motlakase
Tlhokahalo ea Matla
- Keletso voltage:DC10.8 V～DC28V.
- Haholo-holo hlokomela hore ho tlameha ho ba le sebaka se lekaneng pakeng tsa sehlahisoa sena le li-converter kapa phepelo ea motlakase ea mokhoa oa ho fetola. Etsa bonnete ba hore likhoele tsa ho kenya le ho tsoa tsa thepa ea mofuta oo ke mohala oa thebe le marang-rang a sireletsang a hokahane le fatše.
- Etsa bonnete ba hore matla a DC le matla a AC a arohane.
- U se ke ua sebelisa matla a tloaelehileng ka mojaro oa maikutlo kapa potoloho ea ho kenya ea molaoli.
- Hlokomela: Fuse ea ka hare e tla thibela tšenyo ea ho feta voltagBoemo ba e, leha ho le joalo ha ho na tiisetso ea hore likarolo tsa kahare tsa elektroniki ha li senyehe.
Tlhaloso ea Tlhophiso
Setšoantšo sa Dimensional
Litaelo tse tsitsitseng tsa ho kenya Screw
- Sehlahisoa se kenngoa ka sekoting se kentsoeng hantle sa phanele ea lebokose la taolo ea mochini, 'me li-screw tse kenngoa ka har'a masoba a ho lokisa ho potoloha khetla ea HMI ho tloha ka morao ho phanele ea lebokose la taolo.
- Torque e khothalelitsoeng ea senotlolo: 0.5Nm (ho thibela metsi le ho qoba ho senyeha ha khetla)
Khokelo ea Matla
- Pele o hokela motlakase, ka kopo etsa bonnete ba hore litekanyetso tsohle tsa motlakase tsa lehae le tsa naha li fihletsoe. Bakeng sa likhoele tsa motlakase, ka kopo khetha likhoele tse nang le matla a tsona a matla a dielectric le litekanyetso tsa hajoale ho latela lintlha tsa polokeho.
- Qala ka ho fumana theminale ea motlakase ka morao ho sehlahisoa 'me u lokolle screw ho ea ka tsela e fapaneng le oache, ebe u kenya lithapo tsa motlakase ebe u tiisa screw holimo. Hokela mohala o motle oa DC ho theminale ea 'DC24V', DC ho ea sebakeng sa 'GND' le moeli oa fatše ho ea 'FG'.
Sebopeho sa Kantle
MATLA
| Pin # | Letshwao |
| 1 | DC24V |
| 2 | GND |
| 3 | FG |
COM0/COM2
- Mosebetsi oa Pin oa banna ba 9-pin, D-SUB, COM0/COM2
- Hlokomela: Mesebetsi ea puisano ea RS232/485/422 e tšehetsoa ke COM0.COM2 e tšehetsa mosebetsi oa puisano oa RS232.
|
Pin |
Letshwao |
PLC (COM0) [RS-422] |
PLC (COM0) [RS-485] |
PLC (COM0) [RS-232] |
PC/PLC
(COM2) [RS-232] |
| 1 | Rx-(B) | RS422 R- | RS485 B | ||
| 2 | RxD_PLC | RS232 RxD | |||
| 3 | TxD_PLC | RS232 TxD | |||
| 4 | TX- | RS422 T- | |||
| 5 | GND | Sebaka sa lipontšo | |||
| 6 | Rx+(A) | RS422 R+ | RS485 A | ||
| 7 | RxD_PC | RS232 RxD | |||
| 8 | TxD_PC | RS232 TxD | |||
| 9 | Tx + | RS422 T+ | |||
COM1
- Mosebetsi oa phini oa banna ba 2-pin, D-SUB,COM1
- Hlokomela: Mesebetsi ea puisano ea RS485 e tšehetsoa ke COM1
| Pin | Letshwao |
| 1 | Rx+(A) |
| 2 | Rx-(B) |
USB HOST
| Khokahano | Hokela le lisebelisoa tsa USB interface kapa U disks |
| Mosebetsi oa Boema-kepe | Khokahano ena e ka hokahana le keyboard ea USB, toeba le liprinta, 'me U disk e ka sebelisoa bakeng sa ho kenya / ho jarolla le ho boloka data. |
USB LEKHOBA
Mofuta oa sebopeho ke MicroUSB
| Khokahano | Boema-kepe ba USB Slave bo ka hokahanngoa le PC |
| Mosebetsi oa Boema-kepe | Boema-kepe bo sebelisoa feela ho khoasolla lenaneo la tlhophiso ea basebelisi ho HMI le ho beha liparamente tsa sistimi ea HMI. |
Hlokomela: USB HOST segokanyimmediamentsi sa sebolokigolo le USB SLAVE segokanyimmediamentsi sa sebolokigolo ke nako ea multiplexing multiplexing, 'me ha ea lokela ho sebelisoa ka nako e tšoanang!
Ethernet (e tšehetsoa feela ke MT100E)
10M/100M adaptive Ethernet RJ45 port.
| Khokahano | Ka thapo ea CAT5 UTP e hoketsoeng sesebelisoa sa Ethernet. |
| Mosebetsi oa Boema-kepe | Boema-kepe bo ka sebelisoa bakeng sa ho kenya / ho khoasolla tlhophiso ea HMI, ho beha maemo a sistimi le lipapiso tsa marang-rang tsa meralo. E ka hokahanya li-HMI tse ngata ka Ethernet ho theha marang-rang a HMI. Ho feta moo, e ka kenya tšebetsong likhokahano lipakeng tsa HMI le PLC ka Ethernet, hammoho le likhokahano le PC ka boema-kepe ba Ethernet. |
Tšebeletso ea ka mor'a thekiso
Bakeng sa <Melao le Maemo a Ts'ebeletso bakeng sa HMI >, ka kopo sheba:http://www.kinco.cn
Litokomane / Lisebelisoa
 |
Kinco MT100E HMI Touch Screen [pdf] Buka ea Taelo PD0001, MT100E, MT100E HMI Touch Screen, HMI Touch Screen, Touch Screen, Screen |
