KEPLUG Motion Sensor Ceiling Light

LIEKETSENG

Khetho ea mabone a LED a sebetsang hantle, a sebetsang hantle bakeng sa matlo le likhoebo tsa sejoale-joale ke KEPLUG Motion Sensor Ceiling Light. Leseli lena la siling ea 1600-lumen le mocheso oa 'mala oa 6500K le fana ka khanya e khanyang, e kang ea motšehare e loketseng likamore tse ka tlaase, likarache, litepisi le liphaseje. Ka khokahanyo e thata le matla a AC (110V), e netefatsa thabo e tsitsitseng le e tšoarellang ea mabone. Theknoloji ea eona ea sensor ea ho sisinyeha e ntlafatsa polokeho le ho boloka matla, 'me ts'ebetso ea eona e laoloang ka thōko e etsa hore liphetoho li be bonolo. E etsa hore ho be le tekano lipakeng tsa ts'ebetso le ts'ebetso ka mehloli ea eona ea leseli la 72 LED le tšebeliso ea matla a 18W. Tharollo ena ea mabone, e rekisoang ka $29.99 e lekaneng, e hlahisitsoe ka la 19 Phuptjane 2023, ke KEPLUG, k'hamphani e tsebahalang ea mabone a bohlale. The KEPLUG Motion Sensor Ceiling Light ke khetho e ntle haeba u hloka leseli le khanyang, le arabelang bakeng sa boiketlo kapa polokeho.

LIEKETSENG TS'OANELO

Brand	KEPLUG
Theko	$29.99
Mohloli oa Matla	AC
Mokhoa oa ho Laola	Hole
Mofuta oa Mohloli oa Leseli	LED
Palo ea Mehloli ea Leseli	72
Moqtage	Li-volts tse 110
Wattage	18 Watts
Mofuta oa Molaoli	Remote Control
Palo ea likarolo	2.0 Palo
Khokahano Protocol	Hardwired
Khanya	1600 Lumens
Mocheso oa Mobala	6500 Kelvin
Litekanyo tsa Sehlahisoa (L x W x H)	8.66 x 8.66 x 1.11 lisenthimithara
Boima ba 'mele	2.01 Liponto
Letsatsi le Fumanang Pele	La 19 Phuptjane 2023
Moetsi	KEPLUG

NTHO E LEKOSI

• Leseli la siling
• Bukana ea Mosebelisi

LIKAROLOANA

• Theknoloji ea Motion Sensor: Sensor e kopaneng ea leseli le microwave e khona ho bona motsamao nakong ea maoto a 9-18 mme e tla tima ka bo eona kamora metsotsoana e 30–120–180.

• Liphetoho tse tharo tsa Mocheso oa Mebala: Bakeng sa moea o ikhethileng, khetha pakeng tsa 3000K (Bosoeu bo Mofuthu), 4000K (Bosoeu ba Tlhaho), kapa 6000K (Bosoeu bo Phodileng).
• Mekhoa e meraro ea ts'ebetso: Bakeng sa ts'ebetso e feto-fetohang, khetha AUTO (mokhoa oa ho sisinyeha), OMA (koala), kapa HO BUA (e buletsoe kamehla).

• Phatsi e Phahameng: E sebelisa matla a 18W feela ho fana ka mabone a 1600 a khanya e matla.
• Matla a matla: Ka ho fetola mabone a incandescent a 180W ka li-LED tsa 18W, litšenyehelo tsa motlakase li fokotsehile haholo.
• Moralo oa Ultra-Thin: Mokhoa o boreleli, oa sejoale-joale o tlatselletsa mokhabiso ofe kapa ofe oa kahare hobane o botenya ba lisenthimithara tse 0.98 feela.
• Nako e telele ea Bophelo: Ts'ebetso ea nako e telele ntle le ho nkeloa sebaka khafetsa e netefatsoa ke nako ea bophelo ea lihora tse 30,000.
• Lekunutu le Atileng: Sebaka sa eona sa ho lemoha sa 120-degree se fana ka tšireletso e phahameng, e etsang hore e be e loketseng bakeng sa likamore tse ka tlaase, liphasejeng, liphasejeng le litepisi.
• Tšebeliso ea Ka hare le Kantle: Moralo oa eona o hananang le boemo ba leholimo o etsa hore e tšoanele libaka tse ka ntle tse koetsoeng, likarache, likamore tsa ho hlatsoetsa liaparo le mathule.
• Kemiso ea Hardwired: Bakeng sa ts'ebetso e tšepahalang le e tsitsitseng, khokahano ea motlakase ea AC ea hlokahala.

• E lumellana le Remote Control: Bakeng sa ts'ebetso e bonolo, fetola li-setting u le hole.
• Tšebeliso ea merero e mengata: E nepahetse bakeng sa li-hallways, pantries, sheds, stairwells le libaka tse ling malapeng le likhoebong.
• Ketso e potlakileng Lefifing: Ho etsa bonnete ba hore e sebetsa hantle, sensor ea motsamao e bulela feela khanya e tlase.
• Phetoho e Bonolo ea Slide: Phetoho e otlolohileng ka morao ea sesebelisoa e u lumella ho fetola 'mala oa leseli pele o kenngoa.
• Thepa e Felletseng ea ho Kenya: E fana ka lisebelisoa tsa ho kenya le litaelo tse felletseng bakeng sa ho seta habonolo.

SETUP MOELETSI

• Bula sephutheloana: Etsa hore leseli la sensor ea motsamao, lisebelisoa tse ntseng li hola, le litaelo tsa ho kenya li kenyellelitsoe.
• Tima Phepelo ea Matla: Bakeng sa polokeho, tima motlakase o moholo kapa sekhechana sa potoloho pele o kenya.
• Khetha Sebaka sa ho Beha: Sebaka se setle sa ho lemoha motsamao leboteng kapa siling se lokela ho khethoa.
• Lintlha tsa Mark Drill: Tšoaea libaka tsa li-screw holimo u sebelisa borakete e ntseng e hola e tlang le eona.
• Cheka Likoti tse Mounting: Bakeng sa tšehetso e eketsehileng, phunya masoba 'me u kenye liankora tsa lebota ha ho hlokahala.
• Wiring ea motlakase e lokela ho hokahanngoa: Bapisa lithapo tsa fatše (G), tse sa nke lehlakore (N), le tse phelang (L) 'me u li fase u sebelisa linate tsa terata.
• Sireletsa Mounting Bracket: Sebelisa liankora le likurufu ho fasa bracket siling.
• Tsamaisa Tokiso ho Maemo: Hlophisa leseli ka bracket, ebe u le phurufalla ka thata.
• Khetha Hue Temperature: Ho khetha 'mala o khanyang oo u o ratang, thellela switch ka morao ho sesebelisoa pele u e bulela.
• Khetha mokhoa oo u o batlang: Ho ipapisitse le likhetho tsa hau, seta switch ho ON, AUTO, kapa OFF.
• Khutlisa Matla: Lekola ts'ebetso ea leseli 'me u bulele sekhechana sa potoloho.
• Mosebetsi oa Sensora ea Teko: Ho bona hore na lebone le buleha le ho tima hantle, tsamaea ka har'a maoto a 9 ho isa ho a 18.
• Fetola Nako ea ho lieha: Bakeng sa nako ea ho tima, khetha 30s, 120s, kapa 180s ha ho hlokahala.
• Netefatsa Ts'ebetso ea Taolo ea Remoutu: Haeba ho sebelisoa mofuta oa remote control, etsa bonnete ba hore o khona ho hokahanya le sesebelisoa.
• Tlhahlobo ea ho Qetela: Netefatsa hore lebone le kentsoe ka nepo, le kentsoe ka thata, 'me le sebetsa kamoo le reriloeng kateng.

TLHOKOMELO TS'ELISO

• Ho Hloekisa Khafetsa: Ho qoba ho bokellana ha lerōle ho ka fokotsang khanya, hlakola bokaholimo ka lesela le bonolo, le omeletseng.
• Qoba lik'hemik'hale tse matla: Qoba ho sebelisa solvents kapa abrasive cleansers tse ka senyang lesela la thepa.
• Netefatsa Ts'ebetso ea Motion Sensor: Ho etsa bonnete ba hore sensor ea motsamao e sebetsa hantle, nako le nako hlahloba mofuta oa eona.
• Boloka Sensor e sa sitisoe: Bakeng sa tlhahlobo e ntle ka ho fetisisa ea ho sisinyeha, etsa bonnete ba hore ha ho letho le tseleng ea pono ea sensor.
• Tobetsa Li-Screw tse Loketseng: Ho etsa bonnete ba hore sesebelisoa se lula se le teng ha nako e ntse e ea, hlahloba borakete le likurufu.
• Lihokelo tsa Motlakase: Ho qoba likhokahano tse pepesitsoeng kapa tse hlephileng, nako le nako hlahloba lithapo.
• Fetola Sensitivity ha ho hlokahala: Tsamaisa fixture kapa fetola bophahamo ba instola haeba lebone le khantšoa ka tšohanyetso.
• Qoba ho Kena ka Metsi: Ho qoba tšenyo, qoba ho kopana le metsi ka kotloloho le hoja ho loketse libaka tse ka ntle tse koahetsoeng.
• Etsa bonnete ba hore ho na le moea o lekaneng: Qoba ho beha sesebelisoa libakeng tse koaletsoeng moo mocheso o ka 'nang oa bokellana.
• Fetola Likarolo Tse Fosahetseng: Sheba lithapo kapa u nahane ka ho fetola yuniti haeba ho panya kapa ho fifala ho qala ho etsahala.
• Leka Mehato e Fapaneng ea Mebala: Ho fumana maemo a loketseng, leka litlhophiso tsa 3000K, 4000K, le 6000K haeba khanya e bonahala e tima.
• Sebelisa Liphetoho tse Loketseng: Etsa bonnete ba hore switch ea lebota kapa dimmer ea hau e lumellana le mabone a LED.
• Fokotsa ho Baesekele ea Matla: Nako ea bophelo ea lebone e ka khutsufatsoa ka ho le bulela le ho tima khafetsa.
• Seta hape Motion Sensor ha ho hlokahala: Tima motlakase ka metsotso e leshome ebe o o bulela hape.
• Polokelo e Sireletsehileng ea Taolo ea Remoutu: Haeba mohlala oa hau o na le taolo e hole, e boloke sebakeng se itseng ho thibela tahlehelo.

HO BATLE PHOSO

Hlahisa	Lebaka le ka khonehang	Tharollo
Leseli le sa boneseng	Taba ea khokahano ea motlakase	Sheba li-wiring le phepelo ea motlakase.
Sensor ea ho sisinyeha ha e sebetse	Tšitiso ea kutlo	Netefatsa hore sebaka sa sensor se hlakile.
Leseli le panyang	Wiring e hlephileng kapa voltage feto-fetoha	Secure wiring le hlahloba voltage.
Remout not arabela	Betri e fokolang kapa tšitiso	Fetola betri 'me u qobe litšitiso.
Lesedi le dula le le teng	Kutloisiso ea kutlo e phahame haholo	Fetola li-setting tsa sensor.
Leseli le tima kapele haholo	Sebapa nako se tlase haholo	Eketsa nako ea nako ka remote.
Leseli le lerootho	Moqtaglerotholi	Etsa bonnete ba hore motlakase oa 110V o tsitsitse.
Karabelo e liehile ho tsoa ho sensor	Tšitiso ea lisebelisoa tse haufi	Tlosa kapa u sireletse sensor.
Ha ho phetoho ea khanya	Ho se sebetse hantle ha hole kapa kutlo	Seta bocha kapa tlosa remote/sensor.
Ho chesa haholo	Moea o fokolang	Etsa bonnete ba hore moea o na le moea o nepahetseng haufi le setsi.

MELEMO LE BOHLOKO

Melemo

1. Theknoloji ea Motion sensor e ntlafatsa ts'ebetso ea matla.
2. Khanya e phahameng (1600 lumens) bakeng sa libaka tse khantšitsoeng hantle.
3. Ho kenya habonolo ka khokahanyo e thata.
4. Ts'ebetso ea remoutu bakeng sa boiketlo ba basebelisi.
5. Moralo oa sejoale-joale le o boreleli o loketse li-interiors tse fapaneng.

Mebe

1. Ha e kenelle metsi, e fokotsa tšebeliso ea kantle.
2. E hloka hardwiring, eseng plug-and-play setup.
3. Remoutu e ka lahleheloa ke khokahano ha nako e ntse e ea.
4. Mocheso o tsitsitseng oa 'mala (6500K), ha ho khetho e mofuthu e tšoeu.
5. Ho lemoha motsamao ho ka ba bobebe haholo libakeng tse nang le batho ba bangata.

TIISETSO

The KEPLUG Motion Sensor Ceiling Light e tla le tiisetso e lekantsoeng ea selemo se le seng, e koahelang liphoso tsa tlhahiso le litaba tsa ts'ebetso. Bareki ba ka ikopanya le sehlopha sa ts'ehetso sa KEPLUG bakeng sa lits'ebetso tse ling kapa thuso ea ho rarolla mathata.

LIPOTSO TSE BOTSOANG HANGATA

Mohloli oa matla oa KEPLUG Motion Sensor Ceiling Light ke ofe?

KePLUG Motion Sensor Ceiling Light e tsamaisoa ke motlakase oa AC, ho netefatsa hore ho na le matla a tsitsitseng.

KEPLUG Motion Sensor Ceiling Light e na le mehloli e mengata ea leseli la LED?

Moetso ona o na le mehloli e 72 ea leseli la LED, e fanang ka khanya e khanyang le e khanyang.

Khanya e hlahisoang ke KEPLUG Motion Sensor Ceiling Light ke efe?

KEPLUG Motion Sensor Ceiling Light e fana ka khanya ea lumens ea 1,600, e etsa hore e be sebaka se loketseng bakeng sa libaka tse khantšitsoeng hantle.

Wat ke engtagea KEPLUG Motion Sensor Ceiling Light?

Leseli lena la siling ea LED le sebetsa ho li-watts tse 18, e leng se etsang hore e be khetho e sebetsang hantle.

Moqtage na KEPLUG Motion Sensor Ceiling Light e hloka?

KePLUG Motion Sensor Ceiling Light e sebetsa ka li-volts tse 110, tse loketseng lisebelisoa tse tloaelehileng tsa motlakase tsa lapeng.

Mokhoa oa taolo bakeng sa Leseli la Ceiling la KEPLUG Motion Sensor ke ofe?

Leseli le ka laoloa ka ho sebelisa remote control, ho fana ka boiketlo le boiketlo ba tšebeliso.

Mocheso oa 'mala oa KEPLUG Motion Sensor Ceiling Light ke ofe?

E na le mocheso oa 'mala oa 6500 Kelvin, o fana ka khanya e tšoeu e pholileng bakeng sa ponahalo e ntlafalitsoeng.

Ke litekanyo life tsa Leseli la Ceiling la KEPLUG Motion Sensor?

Sehlahisoa se lekanya lisenthimithara tse 8.66 x 8.66 x 1.11, se etsa hore se kopane 'me ho be bonolo ho se kenya.

Litšupiso

• Bukana ea Mosebelisi