COM-RM01 Relay module
“
Litlhaloso:
- Sehlahisoa: Relay Module
- Mohlala: COM-RM01
- Moetsi: Joy-IT e tsamaisoa ke SIMAC Electronics GmbH
- Aterese: Pascalstr. 8 - 47506 Neukirchen-Vluyn
- Websebaka: thabela-haiti.net
Litaelo tsa Tšebeliso ea Sehlahisoa:
1. Litaelo tsa Polokeho:
- Le ka mohla u se ke ua sebetsa mojuleng oa relay ha o ntse o le matla.
- Etsa hore ho kenngoe le ho lokisoa ho etsoe ke batho ba nang le litsebo
basebetsi feela. - Netefatsa bohole bo lekaneng ba ho koala le ho qoba bokhutšoane
lipotoloho. - Kenya module ea relay sebakeng se omileng, se hloekileng.
- Kamehla tima motlakase pele ho ts'ebetso efe kapa efe.
- Sebelisa li-fuse kapa overvolvetaglisebelisoa tsa tšireletso.
- Beha mojule oa relay ka mokhoa o sireletsehileng sebakeng se sirelelitsoeng.
- Sebelisa likhoele tse loketseng 'me u hatelle li-terminals ka thata.
- Bakeng sa meroalo e matla, sebelisa li-circuits tse sireletsang joalo ka flyback
diode. - Etsa bonnete ba hore ho na le moea o lekaneng ho thibela mocheso o feteletseng.
- Qoba ho sebelisa sesebelisoa libakeng tse matla
thothomelo.
2. Ho fetaview ea Boto ea Potoloho:
| Khokahano | Tlhaloso |
|---|---|
| NO | Lebitso le bulehileng ha le sa sebetse. E koala ha relay e butswe. |
| COM | Khokahano e tloaelehileng, e hokahaneng le NO kapa NC e ipapisitse le taolo sesupo. |
| NC | Lebitso le koetsoeng ha le sa sebetse. E bula ha relay e butswe. |
| S | Letšoao la taolo (3 - 5 V DC logic level) |
3. Khoutu Exampbakeng sa Arduino:
Ho sebelisa Arduino, hokela ka tsela e latelang:
- Relay + ho Arduino 5V
- S ho ea Arduino pin D7
Kenya khoutu e fanoeng example ho Arduino bakeng sa relay
ts'ebetso.
4. Khoutu Exampbakeng sa Raspberry Pi:
Ho sebelisa le Raspberry Pi, hokela ka tsela e latelang:
- Relay + ho Raspberry Pi 5V
- S ho Raspberry Pi GPIO 17
Netefatsa hore software e hlokahalang e kentsoe ho Raspberry Pi bakeng sa module
ts'ebetso.
Lipotso Tse Botsoang Khafetsa (FAQ):
P: Ke lokela ho etsa eng haeba mojule oa relay o chesa haholo nakong
opereishene?
A: Netefatsa hore ho na le moea o lekaneng ho potoloha mojule oa relay ho
thibela ho futhumala ho feteletseng. Haeba bothata bo ntse bo tsoela pele, ikopanye le moreki
tshehetso.
P: Na nka sebelisa mojule oa relay o nang le matla a holimotagle lisebelisoa?
A: Ho khothalletsoa ho sebelisa lipotoloho tse nepahetseng tsa ts'ireletso bakeng sa
phahameng-voltaglisebelisoa tsa e ho netefatsa ts'ebetso e bolokehileng le ho sireletsa relay
mojule.
"`
RELAY MODULE
COM-RM01
Joy-IT e tsamaisoa ke SIMAC Electronics GmbH - Pascalstr. 8 – 47506 Neukirchen-Vluyn – www.joy-it.net
1. TSEBISO KA KAKARETSO Moreki ea ratehang, kea leboha ha u khethile sehlahisoa sa rona. Ka ho latelang, re tla u bontša seo u lokelang ho se hopola ha u laela le ho sebelisa sehlahisoa.
Haeba mathata a sa lebelloang a hlaha nakong ea ts'ebeliso, ka kopo u se ke oa tsilatsila ho ikopanya le rona.
2. LITAELO TSA TŠEBELETSO Le ka mohla u se ke ua sebetsa mojuleng oa relay ha o ntse o le matla 'me o e-na le ts'ebetso le tlhokomelo e etsoang ke basebetsi ba nang le tsebo feela.
Etsa bonnete ba hore sebaka se lekaneng sa ho koala le ho qoba li-circuits tse khutšoane ka lebaka la likhoele tse hlephileng kapa sebaka se sa lekaneng.
Kenya module ea relay sebakeng se omileng, se hloekileng.
Kamehla tima motlakase pele o hokela, ho lokisa kapa ho hlokomela mojule.
Sebelisa li-fuse kapa overvolvetaglisebelisoa tsa ts'ireletso ho sireletsa li-relay le lisebelisoa tse hokahaneng.
Kenya mochini oa relay ka mokhoa o sireletsehileng sebakeng se sirelelitsoeng le se se nang conductive 'me u qobe ho kopana le lisebelisoa tse tsamaisang.
Sebelisa lithapo tse nang le karolo e loketseng ea sefapano bakeng sa lehlakore la mojaro 'me u tiise li-terminals ka thata ho thibela ho kopana ho hlephileng.
Bakeng sa meroalo e matla (mohlala, li-motor kapa li-coil), li-flyback diode, li-varistors kapa li-circuits tse ts'ireletso tse ts'oanang li lokela ho sebelisoa ho thibela ho phatloha ho feteletseng.tages.
Etsa bonnete ba hore ho na le moea o lekaneng ho thibela mojule oa relay ho chesa haholo.
Qoba ho sebelisa sesebelisoa libakeng tse nang le ho thothomela ho matla kapa ho thothomela ha mochini, kaha sena se ka senya tšebetso ea sona.
3. MOKHOAVIEW LEBOTO LETS'ELA
NO
–
COM
+
S NC
Khokahano NO COM NC S
Tlhaloso
Lebitso le bulehileng ha le sa sebetse. E koala ha relay e sebelisoa ke boemo bo phahameng holim'a pini ea pontšo ea taolo.
Khokahano e tloaelehileng, e hokahaneng le NO kapa NC ho latela lets'oao la taolo.
Lebitso le koetsoeng ha le sa sebetse. E bula ha relay e kentsoe ke boemo bo phahameng holim'a pini ea lets'oao la taolo.
Letšoao la taolo (3 - 5 V DC logic level)
+
Khokahano e ntle ea phepelo ea motlakase bakeng sa lehlakore la taolo
(5 V DC)
–
Khokahano e mpe ea phepelo ea motlakase bakeng sa lehlakore la taolo
(GND)
i Haeba relay e tlas'a mojaro o phahameng ka nako e telele, etsa bonnete ba hore
Mojule oa relay o na le moea o lekaneng ho thibela mocheso o feteletseng le ho netefatsa
bophelo ba tšebeletso ea relay.
4. KHOUTU EXAMPLE ARDUINO
Ho sebelisa mojule le Arduino ea hau, e hokela ho Arduino ea hau joalo ka ha ho bonts'itsoe setšoantšong le tafoleng.
Relay + S
Arduino 5 V GND D7
Joale kopitsa khoutu e latelang example 'me u e kenye ho Arduino ea hau. Ka mohlalaampLe, relay e fetoloa metsotsoana e meng le e meng e 5.
// Pin eo relay e hokahaneng ho eona const int relayPin = 7;
void setup() {// Beha phini ea relay joalo ka pinMode ea tlhahiso(relayPin, OUTPUT);
// Tlosa relay qalong digitalWrite(relayPin, LOW); }
void loop() {// Fetolela ho relay digitalWrite(relayPin, HIGH); tieho (5000); // ema metsotsoana e 5
// Tima relay digitalWrite(relayPin, LOW); tieho (5000); // ema metsotsoana e 5 }
5. KHOUTU EXAMPLE RASPBERRY PI
Ho sebelisa mojule le Raspberry Pi ea hau, e hokela ho Raspberry Pi ea hau joalo ka ha ho bonts'itsoe setšoantšong le tafoleng.
Relay + S
Raspberry Pi 5 V GND
GPIO 17
Joale kenya litaelo tse latelang ho terminal ho netefatsa hore software e hlokahalang e kentsoe.
sudo apt apdeite sudo apt apkreite sudo apt kenya python3-pip pip3 kenya gpiozero
Joale kenya taelo e latelang ho terminal ho theha Python e ncha file.
nano COM-RM01.py Kopitsa khoutu e latelang example moo
ho tsoa ho gpiozero import OutputDevice ho tloha nakong ea ho tlisa boroko
# Pin eo relay e hokahaneng ho eona (mohlala GPIO17) relay = OutputDevice (17)
ha e ntse e le 'Nete: # Fetola relay relay.on()
print("Relay switched on") robala(5) # ema metsotsoana e 5
# Tima relay relay.off() print("Relay switched off") robala(5) # ema metsotsoana e 5
Boloka the file ka CTRL + O le Enter. Ebe u tsoa ho file ka CTRL + X.
Hona joale o ka kenya sample code ka taelo e latelang:
python3 COM-RM01.py
Ka mohlalaampLe, relay e fetoloa metsotsoana e meng le e meng e 5.
U ka koala lenaneo hape ka motsoako oa senotlolo CTRL + C.
6. TSEBISO LE BOITLAMELO BA HO PUSOA
Lintlha tsa rona le boitlamo ba ho khutlisetsa morao tlas'a Molao oa Jeremane oa Lisebelisoa tsa Motlakase le Elektronike (ElektroG)
Letšoao la lisebelisoa tsa motlakase le tsa elektroniki: Lithōle tsena tse khelohileng li ka bolela hore lisebelisoa tsa motlakase le tsa elektroniki ha se tsa litšila tsa ka tlung. U tlameha ho lahla lisebelisoa tsa khale sebakeng sa pokello. Pele o li tlisa, o tlameha ho arola libeteri tse sebelisitsoeng le li-accumulator tse sa kenngoeng ka har'a sesebelisoa sa khale.
Likhetho tsa ho khutlisa: Joaloka mosebelisi oa ho qetela, u ka fana ka sesebelisoa sa hau sa khale (seo ha e le hantle se phethahatsang mosebetsi o tšoanang le oa sesebelisoa se secha se rekiloeng ho rona) hore u se lahlele mahala ha u reka sesebelisoa se secha. Lisebelisoa tse nyane tse nang le litekanyo tsa kantle tse sa feteng 25 cm li ka lahloa ka bongata bo tloaelehileng ba ntlo ho sa tsotelehe ho rekoa ha sesebelisoa se secha.
Lichelete li ka etsoa sebakeng sa rona sa khampani nakong ea lihora tsa ho bula: SIMAC Electronics GmbH, Pascalstr. 8, D-47506 Neukirchen-Vluyn
Khetho ea ho khutlisa sebakeng sa heno: Re tla u romella pasela stamp eo ka eona u ka khutlisetsang sesebelisoa ho rona mahala. Ka kopo ikopanye le rona ka e-mail ho Service@joy-it.net kapa ka mohala.
Lintlha tsa ho paka: Ka kopo pakela sesebelisoa sa hau sa khale ka mokhoa o sireletsehileng bakeng sa sepalangoang. Haeba ha u na thepa e loketseng ea ho paka kapa u sa lakatse ho sebelisa ea hau, ka kopo ikopanye le rona 'me re tla u romella sephutheloana se loketseng.
7. THUSO
Re boetse re teng bakeng sa hau ka mor'a ho reka. Haeba u ntse u e-na le lipotso kapa mathata, re boetse re fumaneha ka e-mail, mohala le tsamaiso ea tšehetso ea litekete.
E-mail: service@joy-it.net Sistimi ea litekete: https://support.joy-it.net Fono: +49 (0)2845 9360 - 50
Ho fumana lintlha tse ling, ka kopo etela rona webSebaka sa marang-rang: www.joy-it.net
E phatlalalitsoe: 2025.01.16
www.joy-it.net SIMAC Elektronik GmbH Pascalstr. 8 47506 Neukirchen-Vluyn
Litokomane / Lisebelisoa
 |
THABELA COM-RM01 Relay Module [pdf] Buka ea Mong'a COM-RM01, COM-RM01 Relay Module, COM-RM01, Relay Module, Mojule |