MONOANA MOLOMO
COM-FP-R301T
LINTLHA TSE AKARETSANG
Moreki ea ratehang,
kea leboha ka ho khetha sehlahisoa sa rona. Ho latelang, re tla u bontša mokhoa oa ho sebelisa sesebelisoa sena.
Haeba u ka kopana le mathata leha e le afe a sa lebelloang nakong ea tšebeliso, ka kopo u se ke ua tsilatsila ho iteanya le rona.
PHEKOLE
| Lebitso | Mmala |
| 5 V | Khubedu |
| GND | Ntsho |
| TXD | Bosehla |
| RXD | Bosoeu |
| Thetsa | Botala |
| 3,3 V | Boputsoa |
SEBELISA LE RASPBERRY PI
3.1 Khokahano
Bakeng sa Raspberry Pi, re sebelisa mojule oa USB ho TTL. Ka kopo ea rona example, re sebelisa tsa rona USB interface converter - Joy-ITntho bakeng sa sena. Ka hona, re hokahanya sensor ea menoana ho adaptara joalo ka ha ho bonts'itsoe ka tlase.
| Sensor sa menoana | SBC-TTL |
| 5 V (Khubelu) | 5 V |
| GND (Ntšo) | GND |
| TXD (Tšehla) | RXD |
| RXD (Tšoeu) | TXD |
| Thetsa (Tala) | – |
| 3,3 V (Boputsoa) | – |
Joale hokela SBC-TTL ho e 'ngoe ea likou tsa hau tsa USB tsa Raspberry Pi.
Re sebelisa SBC-TTL hobane sensor e fanoa ke 5 V le TXD / RDX feela e na le tekanyo ea logic ea 3,3 V. Ka hona, Raspberry Pi e ka senyeha nakong ea ho amana ka ho toba le sensor. Pin Touch ke pini e hlahisoang, e romellang letšoao haeba monoana o behiloe ho sensor. Sensor e ka sebetsoa ka pin ea 3.3 V empa e khona ho bona feela hore na monoana o behiloe ho eona ka pin pin mme e sitoa ho bala menoana.
3.2 Ho kenngwa
Re sebelisa theGitHub - bastianraschke/pyfingerprint: Laeborari ea Python bakeng sa lisensara tsa menoana ea ZhianTec (mohlala, ZFM-20, ZFM-60)laebrari ka Bastian Raschke, e lokolloa tlas'a pyfingerprint/LICENSE at Development · bastianraschke/pyfingerprint · GitHub, ho laola kutlo ea menoana. Ho
kenya laeborari le litšepiso tsohle tsa eona, tsamaisa litaelo tse latelang:
sudo bash
wget -O - https://apt.pm-codeworks.de/pm-codeworks.de.gpg | apt-key eketsa -
wget https://apt.pm-codeworks.de/pm-codeworks.list -P /etc/apt/sources.list.d/apt-fumana ntlafatso apt-get install python3-fingerprint -e
apt-fumana -f kenya Etsoa sudo stty -F /dev/ttyAMA0 57600
3.3 Tšebeliso le laeborari
Haeba joale u phethahatsa taelo e latelang, u ka boloka monoana.
python3 /usr/share/doc/python3-fingerprint/examples/example_enroll.py
U ka sebelisa taelo e latelang ho botsa menoana ea hau ho bona hore na e fumaneha ho data ea hau.
python3 /usr/share/doc/python3-fingerprint/examples/example_search.py
U ka bona hore na ke menoana e mekae e bolokiloeng hajoale ka ho sebelisa taelo e latelang ho bona:
python3 /usr/share/doc/python3-fingerprint/examples/example_index.py
SEBELISA LE ARDUINO
4.1 Khokahano
| Sensor sa menoana | SBC-TTL |
| 5 V (Khubelu) | 5 V |
| GND (Ntšo) | GND |
| TXD (Tšehla) | Pina ea 2 |
| RXD (Tšoeu) | Pina ea 3 |
| Thetsa (Tala) | – |
| 3,3 V (Boputsoa) | – |
Pin Touch ke pini e hlahisoang, e romellang letšoao haeba monoana o behiloe ho sensor. Sensor e ka sebetsoa ka pin ea 3.3 V, empa e khona ho bona feela hore na monoana o behiloe ho eona ka pin pin mme e sitoa ho bala menoana.
4.2 Ho kenngwa
Re sebelisa laebrari GitHub - adafruit/Adafruit-Fingerprint-Sensor-Library: laeborari ea Arduino bakeng sa ho hokahana le sensor ea menoana lebenkeleng la Adafruit. ho tloha Adafruit Industries · GitHub, e lokolloa tlas'a Adafruit-Fingerprint-Sensor-Library/license.txt at master · adafruit/Adafruit-Fingerprint-Sensor-Library · GitHub. U ka kenya laebrari ka
Arduino IDE tlas'a Lisebelisoa → Laola Lilaebrari… .
4.3 Tšebeliso le laeborari
U ka matha sample likhoutu under File → Examples → Laeborari ea Sensor ea menoana ea Adafruit. U ka sebelisa lengolo la ngoliso ho eketsa menoana le
menoana ho bapisa monoana ho data e bolokiloeng.
Ha o etsa sena, etsa bonnete ba hore o khethile Boto e nepahetseng le Port in Tools.
TSEBISO E MONG
Litaba le boitlamo ba rona ba topollo ho latela Molao oa Thepa ea Motlakase le oa Elektronike (ElektroG)
Letšoao la lihlahisoa tsa motlakase le tsa elektroniki :
Moqomo ona o arotsoeng o bolela hore lihlahisoa tsa motlakase le tsa elektroniki ha li kenelle ka har'a litšila tsa ntlo. U tlameha ho nehelana ka sesebelisoa sa hau sa khale ofising ea ngoliso. Pele o ka fana ka sesebelisoa sa khale, o tlameha ho tlosa libeteri tse sebelisitsoeng le li-accumulator tse sa kenngoeng ke sesebelisoa.
Mekhoa ea ho khutlisa :
Joaloka mosebelisi oa ho qetela, u ka fana ka sesebelisoa se secha ka theko ea sesebelisoa sa hau sa khale (se nang le mesebetsi e tšoanang le e ncha) mahala bakeng sa ho lahla. Lisebelisoa tse nyane tse se nang litekanyo tse ka ntle ho feta 25 cm li ka romelloa ntle le ho reka sehlahisoa se secha ka bongata bo tloaelehileng ba malapa.
Monyetla oa ho khutlisa sebakeng sa k'hamphani ea rona nakong ea ha re bula lihora:
Simac GmbH, Pascalstr. 8, D-47506 Neukirchen-Vluyn
Monyetla oa ho khutlisa haufinyane :
Re u romella sephutheloana stamp eo o ka re romellang sesebelisoa sa hau sa khale mahala. Bakeng sa monyetla ona, o tlameha ho ikopanya le rona ka e-mail ho tšebeletso@joy-it.net kapa ka mohala.
Tlhahisoleseling mabapi le ho paka:
Ka kopo, kenya lisebelisoa tsa hau tsa khale ka mokhoa o sireletsehileng nakong ea leeto. Haeba u se na thepa e loketseng ea ho paka kapa ha u batle ho sebelisa boitsebiso ba hao, u ka ikopanya le rona 'me re tla u romella sephutheloana se loketseng.
TS'ESO
Haeba lipotso leha e le life li lula li bulehile kapa mathata a hlaha ka mor'a ho reka, re fumaneha ka imeile, mohala le tsamaiso ea tšehetso ea litekete ho araba
tsena.
E-mail: tšebeletso@joy-it.net
Sistimi ea litekete: http://support.joy-it.net
Mohala: +49 (0)2845 98469 - 66 (10 - 17 o'clock)
Ho fumana lintlha tse ling etela rona websebaka: thabela-haiti.net
thabela-haiti.net
SIMAC Electronics GmbH
Pascalstr. 8, 47506 Neukirchen-Vluyn
E phatlalalitsoe: 02.08.2021
Litokomane / Lisebelisoa
 |
thabo-it COM-FP-R301T Sensoro sa menoana [pdf] Bukana ea Mosebelisi COM-FP-R301T, Sensoro sa Menoana |
