Intellitec iConnex Programmable Multiplex Controller
Copyright © 2019 Intellitec MV Ltd
Litaelo tse ka har'a bukana ena (Buka ea Mosebelisi) li tlameha ho baloa ka botlalo pele ho mosebetsi ofe kapa ofe oa ho kenya, tlhahlobo kapa tšebeliso e akaretsang.
Re khothaletsa hore bukana ena e bolokoe sebakeng se sireletsehileng seo u ka se fumanang habonolo bakeng sa phetiso efe kapa efe nakong e tlang.
Ho kenya ho tlameha ho etsoa ke basebetsi ba nang le bokhoni ba nang le tsebo e lekaneng ea lisebelisoa tsa motlakase.
Litlhokomeliso tsohle tse hlokahalang li tlameha ho nkoa ho netefatsa hore sehlahisoa sena se kenngoa ka nepo, ka mokhoa o sireletsehileng le ka mokhoa o sireletsehileng ka har'a ts'ebeliso e lakatsehang.
Sehlahisoa sena ha sea lokela ho kena-kenana le polokeho ea 'mileng kapa sistimi ea polokeho ea OEM e kentsoeng koloing Licheke tsohle tse hlokahalang li tlameha ho etsoa ke motho ea kenyang mochini ho netefatsa hore sesebelisoa sena se sebelisoa feela ka mokhoa o reriloeng mme hape ha se hohlane le melao efe kapa efe ea litsela linaheng tsohle tsa koloi. e ka khannoa ka hare.
Intellitec MV Ltd e na le tokelo ea ho nchafatsa tokomane ena (Buka ea Mosebelisi) ntle le tsebiso ka nako efe kapa efe.
U tla fumana litokomane tsa morao-rao tsa lihlahisoa tsa rona ho rona websebaka:
www.intellitecmv.com
TLHOKOMELO SEHLABAKA
| Keletso Voltage (Volts DC) | 9-32 |
| Kenyo e Felletseng ea Hona Joale (A) | 50 |
| Tšebeliso ea Hona Joale e Emeng (mA) | 29 mA |
| Tšebeliso ea Hona Joale ea Mokhoa oa ho robala (mA) | 19 mA |
| Tekanyetso ea IP ea module ea iConnex | IP20 |
| Boima ba 'mele (g) | 367g |
| Litekanyo L x W x D (mm) | 135x165x49 |
LITLHAKISO
| 6x Digital (Pos/Neg Configurable) |
| 2x MoqtagE Sense (Analog) |
| 1x Sense ea Mocheso |
| 1x External CAN-Bus |
LIEKETSO
| 9x 8A Positive FET w/auto shutdown |
| 1x 1A Negative FET w/auto shutdown |
| 2x 30A Relay Dry Contacts (COM/NC/NO) |
CAN-Bus Baud Rates
| 50 Kbits/s |
| 83.33 Kbits/s |
| 100 Kbits/s |
| 125 Kbits/s |
| 250 Kbits/s |
| 500 Kbits/s |
KEKETSO
Wiring ea Sehokelo sa Plug:
Thapo e lekantsoeng ea 1mm ea koloi e tlameha ho sebelisoa le likhokahanyo tsa Molex:
LIEKETSENG TS'OANYANE
BONTŠA 1
MATLA
LED ea tlhahlobo ea POWER e khantša botala ha matla a sebetsa ho module.
E tla khantša bofubelu nakong ea maemo a phoso.
DATA
LED ea tlhahlobo ea KEYPAD e khantša botala ha letlapa la likonopo le hokelelitsoe mojuleng. E tla benya boputsoa ha konopo efe kapa efe e tobetsoa ho letlapa la likonopo ho bontša likhokahano li le teng.
KA-BESE
LED ea tlhahlobo ea CAN-BUS e khantša botala ha ho na le likhokahano tse sebetsang ho CAN-Bus ea kantle. E tla benya boputsoa ha e lemoha molaetsa o shebiloeng.
LIKETSO 1-6 (Digital)
Li-LED tsa tlhahlobo tsa INPUT 1-6 li khantša botala ha motsoako o lumellanang o le teng.
LINTLHA 7-8 (Analog)
Li-LED tsa tlhahlobo tsa INPUT 7 & 8 li khantša botala, amber le bofubelu ho bontša molumo o hlophisitsoeng esale pele.tage menyako ea litlatsetso tsena. Sena se behiloe ho GUI.
LIEKETSO
Li-LED tsa tlhahlobo ea OUTPUT li khantša botala ha tlhahiso e sebetsa. Haeba ho na le potoloho e khuts'oane molemong oa tlhahiso, LED e tla tima bakeng sa 500ms ebe e khutlela ho 500ms khafetsa ho fihlela potoloho ea motlakase ea module. Sehlahisoa se tla koala ka botlalo 'me matla a tala a LED a tla fetoha khubelu ho bontša phoso e teng. Haeba tlhahiso e le maemong a mangata (> 8A), tlhahiso e tla koala ka nakoana ebe e leka ho bulela makhetlo a 3. Haeba tlhahiso e ntse e le maemong a mangata, tlhahiso e tla lula e koalehile ho fihlela mohopolo oa ho kenya tšebetsong o tsamaisoa ka baesekele. Nakong ena, matla a LED a tla fetoha khubelu 'me tlhahiso ea LED e tla benya ka potlako.
BONTŠA 2
TS'ELISO
- Ha u hlophisa iConnex, li-LED tse ponts'ong ea tlhahlobo li tla fetola ts'ebetso ho bonts'a boemo ba ts'ebetso ea lenaneo.
- Kholomo e hlahang li-LED tsa 1-6 e tla khantša botala ka LED e le 'ngoe e khubelu e benyang ho ea holimo ho bontša hore mokhoa oa ho etsa lenaneo oa sebetsa.
- Kholomo ea li-LED tsa 7-12 e tla khantša botala ka LED e le 'ngoe e khubelu e benyang holimo ha data e fetisoa.
- Kamora hore mananeo a phetheloe, li-LED li tla khutlela tšebetsong e tloaelehileng joalo ka ha ho hlalositsoe leqepheng la 6 (Diagnostic Display 1).
GUI
iConnex GUI ke sesebelisoa se sebelisoang ho ngola le ho kenya mananeo ho module.
E ka khoasolloa, hammoho le bakhanni ba sesebelisoa sa mananeo, ho tsoa ho rona websebaka: www.intellitecmv.com/pages/downloads
Ho bua
Mojule o ka kenngoa mokhoeng oa 'slave' ka ho fetolela ho daela ho 1,2,3 kapa 4. Ho hlokahala potoloho ea motlakase ho kenya mekhoa ena.
Sheba tafole e ka tlase bakeng sa mekhoa e sebetsang:
| 0 | Master Module |
| 1 | Mojule oa 1 oa Lekhoba |
| 2 | Mojule oa 2 oa Lekhoba |
| 3 | Mojule oa 3 oa Lekhoba |
| 4 | Mojule oa 4 oa Lekhoba |
| 5 | Mojule oa 5 oa Lekhoba |
| 6 | Mojule oa 6 oa Lekhoba |
| 7 | Mojule oa 7 oa Lekhoba |
| 8 | Mojule oa 8 oa Lekhoba |
| 9 | Mojule oa 9 oa Lekhoba |
| A | Mojule oa 10 oa Lekhoba |
| B | Mojule oa 11 oa Lekhoba |
| C | Mojule oa 12 oa Lekhoba |
| D | Mojule oa 13 oa Lekhoba |
| E | Mojule oa 14 oa Lekhoba |
| F | E boloketsoe Tšebeliso ea Kamoso |
TS'ELISO
Mojule o ka hlophisoa ho sebelisoa sehokelo se secha sa USB-B. Mojule o tla kenya mokhoa oa ho etsa lenaneo ka bohona ha GUI e leka ho hlophisa mojule ka khokahano ena ea USB.
CAN-Bus Termination Resistor Jumpers
Mojule o na le likhokahano tse peli tsa data tsa CAN-Bus. Haeba mohala o hloka mohanyetsi oa ho emisa
sebakeng sa module sa iConnex, tsena li ka nolofalloa ka ho khetha boemo ba jumper ka nepo.
KEYPAD Aterese
Li-keypad tsa iConnex li lebisitsoe ho nomoro ea 1,2,3,4,5,6,7,8,9,10,11,12,13&14.
Sebakeng sefe kapa sefe sa sistimi e le 'ngoe, konopo ka 'ngoe e tlameha ho ba le nomoro ea eona ea aterese e ikhethileng.
Mokhoa o ka tlase o laela mokhoa oa ho fetola nomoro ea aterese, ho kenya tšebetsong / ho tima mohanyetsi oa ho emisa le mokhoa oa ho etsa view haeba o sa tiisehe.
Ho fetola aterese ea letlapa la likonopo la iConnex, qala ka hore letlapa la likonopo le tingoe.
Tobetsa o hatelle switjha 1 ebe o matlafatsa letlapa la dikonopo (ka mojule).
Likonopo tsohle li tla ba RED. U ka tlohela li-switches nakong ena. (Mothating ona, li-LED tsa RED li tla tima.
Switch 1 LED e tla benya ka mokhoa o latelang ho bontša hore na ho khethiloe aterese efe:
Tobetsa switch 1 ho ea ho mokhoa o latelang oa aterese.
Palo ea makhetlo ha switjha 1 LED e bonesa bakeng sa ho phatloha ha nakoana e bonts'a nomoro ea aterese e khethiloeng. Ha o le atereseng ea 5, ho tobetsa konopo ea 1 hape ho tla khutlisetsa nomoro ea aterese e khethiloeng ho aterese ea 1.
Mohanyetsi oa ho emisa oa 120ohm bakeng sa netweke ea CAN ea letlapa o ka nolofalloa kapa oa koaloa ka ho tobetsa switch 3. Haeba sesebelisoa sa LED se bonesitsoe ka boputsoa, mohanyetsi oa ho emisa o sebetsa. Haeba sesebelisoa sa LED se koetsoe, mohanyetsi oa ho emisa ha a sebetse.
Switch 2 LED e tla khanya e le tšoeu, tobetsa konopo ena ho netefatsa liphetoho.
Mothating ona, likonopo tsohle tsa keypad li tla benya botala bakeng sa mohlala oa aterese o khethiloeng.
KEKETSO
Katoloso
Li-module tse 15 le li-keypad tse 15
- Sesebelisoa sa sistimi ea iConnex se ka atolosoa ho isa ho li-module tse 15 le li-keypads tse 15. Ke kakaretso ea lintho tse kenang tse 120, liphetho tse 180 le likonopo tse 90 tsa likonopo!
- Li-module le li-keypad li buisana ka marang-rang a tšoanang a data ka ho hokahanya mohala oa 'keypad connector' ka ho bapa.
- Li-module tsa iConnex tse ling li hloka ho lebisoa ho nomoro ea tsona e ikhethang. Ka kopo, sheba leqephe la 8 mabapi le mokhoa oa ho etsa sena.
- Likonopo tse ling tsa iConnex le tsona li hloka ho lebisoa ho nomoro ea tsona e ikhethang. Ka kopo, sheba leqephe la 9 mabapi le mokhoa oa ho etsa sena.
KEYPAD Features
3 Konopo Keypad (3×1 Mokhoa)
4 Konopo Keypad (4×1 Mokhoa)
6 Konopo Keypad (6×1 Mokhoa)
6 Konopo Keypad (3×2 Mokhoa)
- Li-keypad tsohle li na le li-switches tsa nakoana tsa RGB LED tse nang le matla a mabeli. Ba boetse ba na le "programmable RGB boemo ba LED bohareng. Likonopo tsohle li entsoe ka silicon e matla, e apereng ka thata.
- Likonopo tsohle tsa iConnex li IP66 'me li ka kenngoa kantle.
- Li-logos tsa bareki li ka kopuoa ka tatellano ea ho kenya li-dome ho li-keypads bakeng sa litšenyehelo tse nyane tse eketsehileng.
KEYPAD OLED Letoto
OLED DIN ENG-166-0000
MOEKETSI MOCHESO
- Sensor ea mocheso ea iConnex ke karolo ea boikhethelo, e ntlafatsang bokhoni ba PLC le boiphihlelo ba mosebelisi.
- Ho bonolo ho kenya terata ka har'a sistimi ea iConnex u sebelisa khoutu ea mebala ea terata e 3 joalo ka ha ho bonts'itsoe setšoantšong se kaholimo. Sensor ea mocheso e hokela ho sehokelo se thusang ho
mojule oa iConnex. (Letlapa le hlahang leqepheng la 5) - Sensor ea mocheso ea iConnex ha e kenelle metsi 'me e ka kenngoa ka hare kapa ka ntle ho lisebelisoa tsa koloi.
- Ho tloha ho -55 ho isa ho +125 degrees celsius, sensor ea mocheso e loketse ho shebella boholo ba mocheso o teng.
- Sensor ea mocheso e tla le cable ea 1000mm.
Nomoro ea likarolo: DS18B20
Litokomane / Lisebelisoa
 |
Intellitec iConnex Programmable Multiplex Controller [pdf] Bukana ea Mosebelisi iConnex Programmable Multiplex Controller, iConnex, Programmable Multiplex Controller, Multiplex Controller, Controller |
