INKBIRD ITC-306T Plug le Play Themperature Controller
Litlhaloso:
- Mohlala: ITC-306T
- Phepelo ea Matla: 100-240V AC, 50/60Hz
- Boholo ba Mojaro: 10A, 1000W
- Mokhahlelo oa Taolo ea Mocheso: -50°C ~ 99°C / -58°F ~ 210°F
- Qeto ea Mocheso: 0.1°C / 0.1°F
- Mocheso o Nepahetseng: ±1°C / ±1.8°F
- Litekanyo: 140mm x 68mm x 33mm
- Boima ba 'mele: 190g
Litaelo tsa Tšebeliso ea Sehlahisoa
Fetileview:
ITC-306T ke taolo ea mocheso e fapaneng e etselitsoeng taolo e nepahetseng ea mocheso lits'ebetsong tse fapaneng tse kang ho ritela, ho belisa le ho futhumatsa.
Tlhaloso:
Litlhaloso tse qaqileng tsa ITC-306T li thathamisitsoe ka holimo.
Litaelo tsa Linotlolo:
Sesebelisoa se na le linotlolo tse hlakileng bakeng sa ts'ebetso e bonolo. Sheba bukana bakeng sa mesebetsi e itseng ea bohlokoa.
Litaelo tsa bohlokoa tsa ts'ebetso:
Ithute ho sebelisa linotlolo ka nepo ho seta le ho lokisa litlhophiso tsa mocheso.
Taelo ea Menu:
Utloisisa likhetho tsa menyetla tse fumanehang sesebelisoa bakeng sa taolo e ikhethileng ea mocheso.
Tlhaloso ea Phoso:
Itloaetse melaetsa e tloaelehileng ea liphoso le meelelo ea eona molemong oa ho rarolla mathata.
Tataiso ea ho rarolla mathata:
Sheba tataiso ea tharollo bakeng sa litharollo tsa litaba tse tloaelehileng joalo ka lipalo tse sa nepahalang tsa probe le mathata a tlhahiso ea mocheso.
LBH:
- P: Nka lekanya probe joang haeba ho bala ho joalo e fosahetseng?
A: Fetola boemo ba probe, o omise haeba o sebelisoa ka har'a maro, 'me u hlahlobe hore na ha ho na tšenyo. Sebelisa tšebetso ea CA bakeng sa ho lekanya ha ho hlokahala. - P: Ke lokela ho etsa eng haeba tlhahiso ea ho futhumatsa e sa fetohe pele?
A: Netefatsa litlhophiso, etsa bonnete ba hore heater e ea sebetsa, 'me u latele mehato e boletsoeng bakeng sa ho rarolla mathata. Ikopanye le litšebeletso tsa bareki haeba mathata a ntse a tsoela pele. - P: Ke sebetsana joang le taba ea ho futhumatsa mocheso o sa fetoheng tima?
A: Netefatsa litlhophiso, hlahloba meeli ea matla, 'me u latele mehato e fanoeng bakeng sa ho rarolla mathata. Ikopanye le litšebeletso tsa bareki ha ho hlokahala.
Litlhokomelo tsa Tšireletso
- Netefatsa hore sehlahisoa se sebelisoa ka har'a se boletsoeng.
- Se ke oa ama li-terminals bonyane ha o ntse o fana ka motlakase. Ho etsa joalo ka linako tse ling ho ka baka kotsi ka lebaka la ho tsukutloa ke motlakase.
- Se ke oa lumella likotoana tsa tšepe, likotopo tsa terata, kapa litelu tse ntle tsa tšepe kapa li-filings tse tsoang ho kenyelletso ho kena sehlahisoa. Ho etsa joalo ka linako tse ling ho ka fella ka ho tsosoa ke motlakase, mollo, kapa ho se sebetse hantle.
- Se ke oa sebelisa sehlahisoa moo ho nang le khase e tukang kapa e phatlohang. Ho seng joalo, ka linako tse ling ho ka hlaha kotsi e bakoang ke ho phatloha.
- Le ka mohla u se ke ua qhaqholla, ua fetola kapa ua lokisa sehlahisoa kapa ua ama karolo efe kapa efe ea ka hare. Tšitiso ea motlakase, mollo, kapa ho se sebetse hantle ho ka etsahala ka linako tse ling.
- Haeba li-relays tsa tlhahiso li sebelisoa ho feta tebello ea bophelo ba bona, ho kopana ho kopanya kapa ho chesa ho ka etsahala ka linako tse ling.
- Kamehla nahana ka maemo a ts'ebeliso 'me u sebelise li-relays ka har'a boima ba tsona bo reriloeng le nako e lebeletsoeng ea bophelo ba motlakase.
Fetileview
ITC-306T ke eng?
ITC-306T ke selaoli sa mocheso o futhumatsang o kentsoeng pele o nang le ts'ebetso ea nako ka ho khetheha bakeng sa ho ikatisa le ho lema. E ka hlophisoa ho lithempereichara tse peli tse fapaneng ka ts'ebetso ea eona ea ho beha nako e 'meli ea potoloho nakong ea lihora tse 24 ho latela mots'eare le bosiu, e ka loketseng litlhoko tsa fisioloji tsa liphoofolo le limela. ITC-306T e ka sebelisoa ka mokhoa o pharaletseng ho sireletsa mocheso o feteletseng le tsamaiso ea ho laola mocheso oa mefuta eohle ea lisebelisoa tsa motlakase bakeng sa aquarium, ho ikatisa liphoofolo tse ruuoang lapeng, ho qhotsoa, ho belisoa ha li-fungus, le ho mela ha peo ka potlako, joalo-joalo. Sehlahisoa sena sa polaka le ho bapala se entsoe ka pontšo ea LCD tse peli, 'me e fana ka pontšo ea boikhethelo ea Centigrade kapa Fahrenheit ho laola mocheso oa batho. Ka tlhahiso e kholo ea matla a 1200W(110V)/2200W (220V), e loketse lits'ebetso tse ngata. 'Me mocheso o ka laoloa ka mokhoa o nepahetseng haholoanyane ka mosebetsi oa oona oa ho lekanya mocheso le hysteresis ea mocheso.
Lintlha tse ka sehloohong
- Moralo oa plug le ho bapala, o bonolo ho o sebelisa;
- Dual time cycle setting ka nako ya 24hours, e ka behwa mocheso o fapaneng ho tloha motshehare le bosiu ho latela ditlhoko tsa nama tsa diphoofolo le dimela;
- Tšehetso ea ho bala ka yuniti ea Centigrade kapa Fahrenheit;
- Boima bo boholo ba tlhahiso: 1200W (110V) / 2200W (220V);
- Fensetere ea ponts'o e habeli, e khona ho bonts'a mocheso o lekantsoeng le mocheso o behiloeng ka nako e le 'ngoe; Tekanyo ea mocheso;
- Alamo ea mocheso o fetang mocheso le kutlo;
- Haha ka ultra-capacitor, ka mor'a hore e tlatsitsoe ka botlalo, e ka fana
- Sebali sa nako se sebetsa matsatsi a fetang 20 ntle le motlakase.
Tlhaloso
| Mocheso Taolo Range | -50∼99 °C /-58∼210 ° F |
| Ho Nepaha ha Mocheso | ±1°C (-50 ~ 70°C) / ±1°F (-58∼160°F) |
| Mokgwa wa Taolo ya Mocheso | Taolo ea ho Bula/Ho tima, Ho futhumatsa |
| Matla a Kena | 100-240VAC, 50Hz / 60Hz |
| Mocheso Control di neng di kwalwa | Boholo. 10A, 100V -240V AC |
| Mofuta oa Sensor | NTC sensor (Ho kenyeletsoa) |
| Bolelele ba Sensor | 2m 16.56ft |
| Lesokoana Contact bokgoni | Ho futhumatsa (10A, 100-240VAC) |
| Input Matla Cable bolelele | 1.5m (5ft) |
| Output Power Cable Bolelele | 30cm (1ft) |
| Teba ('Mele o ka Sehloohong) | 140x68x33mm (5.5×2.7×1.3 inch) |
| Dimension (Sockets) | Phetolelo ea US: 85x42x24mm Phetolelo ea EU: 135x54x40mm Phetolelo ea UK: 140x51x27mm |
| Ambient Mocheso | -30∼75 °C / -22∼ 167°F |
| Polokelo | Mocheso -20∼60 °C / -4∼ 140 °F Mongobo 20∼85% (Ha ho Condensate) |
| Tiisetso | 1 Selemo |
Litaelo Taeo
- PV: Boleng ba Ts'ebetso
- Tlas'a mokhoa oa ho sebetsa, bonts'a mocheso oa hona joale;
- Tlas'a mokhoa oa ho seta, hlahisa khoutu ea menu.
- SV: Ho beha Boleng
- Tlas'a mokhoa oa ho sebetsa, bonts'a mocheso oa ho seta;
- Tlas'a mokhoa oa ho seta, bonts'a boleng ba ho seta.
- Leseli la Letšoao la Mosebetsi oa 1: Ha lebone le khantšitsoe, qala ho futhumatsa.
- Leseli la Letšoao la Mosebetsi oa 2: -
- SET Key: Tobetsa konopo ea SET bakeng sa metsotsoana e 3 ho kenya menu bakeng sa tlhophiso ea tšebetso. Nakong ea ts'ebetso ea ho seta, tobetsa konopo ea SET bakeng sa metsotsoana e 3 ho emisa le ho boloka liphetoho tsa litlhophiso.
- EKETSA Senotlolo: Tlas'a mokhoa oa ho beha, tobetsa konopo ea INCREASE ho eketsa boleng.
- DECREASE Key: Tlas'a mokhoa oa ho sebetsa, tobetsa konopo ea DECREASE ho botsa boleng ba HD; tlas'a mokhoa oa ho beha, tobetsa konopo ea DECREASE ho fokotsa boleng.
- Socket: Li-sockets ka bobeli ke tsa ho futhumatsa, 'me li fetoha ka mokhoa o lumellanang.
Taolo ea Senotlolo ea Ts'ebetso
Mokhoa oa ho beha liparamente
Ha molaoli a sebetsa ka mokhoa o tloaelehileng, tobetsa konopo ea "SET" bakeng sa metsotsoana e fetang 3 ho kenya mekhoa ea ho seta. Lebone la sesupo sa "SET" le tla be le butswe. Fesetere ea PV e bonts'a khoutu ea pele ea "menu" "TS1" ', ha fensetere ea SV e bonts'a ho latela boleng ba maemo. Tobetsa konopo ea "SET" ho ea ho menu e latelang 'me u bontše ho latela khoutu ea menu, tobetsa "
”Senotlolo kapa“
” senotlolo sa ho seta boleng ba paramethara ea hajoale. Kamora ho etsa litlhophiso, tobetsa konopo ea "SET" metsotsoana e 3 ka nako efe kapa efe ho boloka li-parameter li fetoha le ho khutlela mocheng o tloaelehileng oa ho bonts'a mocheso. Nakong ea ho seta, haeba ho se na ts'ebetso bakeng sa metsotsoana e 10, sistimi e tla tlohela mokhoa oa ho seta ebe e khutlela mocheng o tloaelehileng oa ho bonts'a mocheso ntle le ho boloka liphetoho tsa paramente.
Chate ea Phallo ea Phallo
Maikutlo: Phoso ea TE
Haeba TR=1 'me e buloa hape ka mor'a hore motlakase o time. Fesetere ea SV e bonts'a phoso ea TE. Ha u kena ho li-setting menu, e tla qhomela ho khoutu ea CTH ka ho toba, ebe u ka beha nako ea hona joale (CTH, CTM) habonolo 'me u tlohele boemo bo tloaelehileng ba ho sebetsa.
Ha TR=0 (E sa feleng)
| Khoutu ea menyu | Mosebetsi | Setting range | Tlhophiso ea kamehla | Litlhaloso |
| TS1 | Mocheso Set Boleng 1 |
-50∼99.9°C/-58∼210°F | 25'Cl77″F | 5.1 |
| DS1 | Boleng bo fapaneng ba ho futhumatsa 1 | 0.3∼15°C/1∼30°F | 1.0°C/2°F | |
| CA | Tekanyo ea Mocheso | -15∼15°C/-15∼15°F | 0°C/0°F | 5.3 |
| CF | Hlahisa ka Fahrenheit kapa Centigrade | C / F. | C | 5.4 |
| TR | Tlhophiso ea Nako | 0:Ho tima; 1: Bula | 0 | 5.2 |
Ha TR=1 (mosebetsi wa ho seta nako o butswe)
| Lenane khoutu | Mosebetsi | Setting range | Tlhophiso ea kamehla | Litlhaloso |
| TS1 | Mocheso Seta Boleng 1 | -50∼99.9°C/-58∼210°F | 25°C/77°F | 5.1 |
| DS1 | Boleng bo fapaneng ba ho futhumatsa 1 | 0.3∼15°C/1∼30°F | 1.0°C/2°F | |
| CA | Tekanyo ea Mocheso | -15∼15°C/-15∼15°F | 0°C/0°F | 5.3 |
| CF | Hlahisa ka Fahrenheit kapa Centigrade | C / F. | C | 5.4 |
| TR | Tlhophiso ea Nako | 0:Ho tima; 1: Bula | 5.2 | |
| TS2 | Mocheso Seta Boleng 2 | 0∼99.9°C/32∼210°F | 25°C/68°F | 5.1 |
| DS2 | Ho futhumatsa | 0.3∼15°C/1∼30°F | 1.0°C/2°F | |
| TAH | Nako A Hora ea ho beha | Lihora tse 0-23 | 8(8:00) | 5.2 |
| TAM | Nako A Motsotso wa ho seta | 0-59 metsotso | 00(8:00) | |
| TBH | Nako B setting Hora | Lihora tse 0-23 | 18(18:00) | |
| TBM | Nako B Motsotso oa ho seta | 0-59 metsotso | 00(18:00) | |
| CTH | Litlhophiso tsa Hora ea Hona Joale | Lihora tse 0-23 | 8 | |
| CTM | Litlhophiso tsa Metsotso ea Hona Joale | 0-59 metsotso | 30 |
Temperature Control Range Setting (TS, DS)
Ha molaoli a sebetsa ka mokhoa o tloaelehileng, fensetere ea PV e bonts'a mocheso oa hajoale o lekantsoeng, hammoho le fensetere ea SV e bonts'a boleng ba boemo ba mocheso. Ha le lekanngoa
mocheso oa PVSTS (mocheso o behiloeng boleng) -DS (mocheso o fapaneng oa boleng), tsamaiso e kenya boemo ba ho futhumatsa, lebone la WORK1 le tla be le le teng, 'me relay ea ho futhumatsa e qala ho sebetsa; ha mocheso o lekantsoeng oa PV≥ TS (setting ea mocheso), lebone la WORK1 le tla tima, 'me relay ea ho futhumatsa e tla khaotsa ho sebetsa. Bakeng sa mohlalaample, beha TS = 25 ° C, DS = 3 ° C, ha mocheso o lekantsoeng o le tlase kapa o lekana le 22 ° C (TS-DS) , tsamaiso e kena boemong ba ho futhumatsa; ha mocheso o nyolohela ho 25°C(TS), emisa ho futhumatsa.
Cycle Time Setting (TR, TAH, TAM,TBH, TBM, стн, стм)
Ha TR = 0, ts'ebetso ea ho seta nako e koetsoe, 'me ha ho li-parameter TAH, TAM, TBH, TBM, CTH, CTM e hlahang ho menu.
Ha TR=1, tshebetso ya ho seta nako e butswe.
Nako A ~ Nako B ~ Nako A ke potoloho, lihora tse 24.
Nakong ea Nako A ~ Nako B, molaoli o sebetsa joalo ka TS1 le DS1 setting; nakong ea Nako B ~ Nako ea A, molaoli o sebetsa joalo ka TS2 le DS2 setting;
mohlala, Beha e le TS1=25, DS1=2, TS2=18, DS2=1; TR=1, TAH=8, TAM=30, ТBH=18, TBM=0, CTH=9, CТM=26
Nakong ea 8:30-18:00 (Nako A ~ Nako B), mocheso o laola pakeng tsa 23 ° C ~ 25 ° C (TS1 - DS1 ~ TS1); Nakong ea 18:00 ho isa hoseng ho latelang 8:30 (Nako B ~ Nako A), mocheso o laola pakeng tsa 17°C ~ 18°C(TS2-DS2~TS2); Paramethara CTH le CTM li sebelisoa bakeng sa ho seta nako ea hajoale. Nako ea ho beha ke 9:26.
Tekanyo ea Mocheso (CA)
Ha ho e-na le ho kheloha pakeng tsa mocheso o lekantsoeng le mocheso oa sebele, sebelisa mokhoa oa ho lekanya mocheso ho lekanya mocheso o lekantsoeng le mocheso oa sebele. Thempereichara e lokisitsoeng e lekana le mocheso pele o lekanngoa hammoho le boleng bo lokisitsoeng (boleng bo lokisitsoeng e ka ba boleng bo nepahetseng, 0 kapa boleng bo fosahetseng).
Hlahisa ka Fahrenheit kapa Centigrade unit (CF)
Basebelisi ba ka khetha ponts'o ka boleng ba mocheso oa Fahrenheit kapa Centigrade ho latela tloaelo ea bona. Setting ea kamehla e bonts'a boleng ba mocheso oa Centigrade. Bakeng sa ho hlahisa ka boleng ba mocheso oa Fahrenheit, beha boleng ba CF joalo ka F.
HLOKOMELA: ha boleng ba CF bo fetoha, boleng bohle ba tlhophiso bo tla khutlisoa ho litlhophiso tsa feme.
Tlhaloso ea Phoso
Alamo ea phoso ea Sensor: ha sensor ea mocheso e le potolohong e khuts'oane kapa loop e bulehileng, molaoli o tla qala mokhoa oa phoso oa sensor, ebe o hlakola liketso tsohle. Buzzer e tla lla, LED e bonts'a ER. Alamo ea Buzzer e ka tima ka ho tobetsa konopo efe kapa efe. Ka mor'a hore liphoso li rarolloe, tsamaiso e tla khutlela ho mokhoa o tloaelehileng oa ho sebetsa.
Alamo e fetang mocheso: ha mocheso o lekantsoeng o feta tekanyo ea ho lekanya (ka tlase ho -50 ° C / -58 ° F kapa e phahameng ho feta 99 ° C/210 ° F), molaoli o tla qala mokhoa oa ho lekanya mocheso o feteletseng, 'me a hlakole liketso tsohle. Buzzer e tla lla, LED e bonts'a HL. Alamo ea Buzzer e ka tima ka ho tobetsa konopo efe kapa efe. Ha mocheso o khutlela sebakeng sa ho lekanya, tsamaiso e tla khutlela boemong bo tloaelehileng ba ho sebetsa.
TE phoso
Ha o seta TR=1 'me haeba e buletsoe hape ka mor'a hore motlakase o tima, alamo ea "beep - beep" ka maqhubu a 0.5Hz a buzzer. Mocheso o laoloang ke maemo a TS1 ha fensetere ea PV e bontša mocheso oa hona joale le fensetere ea SV e bontšang phoso ea TE. Ka nako ena, Tobetsa linotlolo life kapa life o ka emisa alamo. Ha o kena ho li-setting menu, e tla qhomela ho khoutu ea TH ka ho toba, ebe u ka beha nako ea hona joale (TH, TM) habonolo 'me u tlohe boemong bo tloaelehileng ba ho sebetsa.
Tataiso ea tharollo ea mathata
| Litaba | Lisosa | Litharollo |
| Palo ea lipatlisiso e fosahetse. |
|
|
| Mocheso oa ho futhumatsa o ke ke oa bulela. |
|
|
| Mocheso oa mocheso o ke ke oa tima. |
|
|
' konopo ( seke oa tobetsa ' 
'konopo). Letšoao la 'work1' le sephetho li lokela ho qala. Haeba hitara e ntse e sa sebetse, ka kopo ikopanye le litšebeletso tsa bareki.Shenzhen Inkbird Technology Co.,Ltd.
support@inkbird.com
- Morekisi: Shenzhen Inkbird Technology Co., Ltd.
- Aterese ea Ofisi: Kamore ea 1803, Mohaho oa Guowei, No.68 Guowei Road, Sechaba sa Xianhu, Liantang, Setereke sa Luohu, Shenzhen, Chaena
- Moetsi: Shenzhen Inkbird Technology Co., Ltd.
- Aterese ea Feme: Mokatong oa 6, Mohaho oa 713, Sebaka sa Liindasteri sa Pengji Liantang, No.2 Pengxing Road, Setereke sa Luohu, Shenzhen, China
E ENTSOE CHAENA
E ETSANG E INKBIRD
Ka kopo, boloka bukana ena hantle bakeng sa tšebeliso. U ka boela ua hlahloba khoutu ea QR ho etela basebeletsi ba rona websebaka sa livideo tsa tšebeliso ea lihlahisoa. Bakeng sa mathata afe kapa afe a tšebeliso, ka kopo ikutloe u lokolohile ho ikopanya le rona ho
support@inkbird.com.
Malebela a mofuthu
- Ho potlakela ho ea leqepheng le itseng la khaolo, tobetsa mongolo o nepahetseng leqepheng la litaba.
- U ka boela ua sebelisa setšoantšo sa setšoantšo kapa tokomane k'honeng e kaholimo ho le letšehali ho fumana leqephe le itseng kapele.
Litokomane / Lisebelisoa
 |
INKBIRD ITC-306T Plug le Play Themperature Controller [pdf] Bukana ea Mosebelisi ITC-306T Plug and Play Temperature Controller, ITC-306T, Plug and Play Temperature Controller, Play Temperature Controller, Temperature Controller, Controller |
