Lenaneo la Infineon CY8CKIT-005 MiniProg4 le Debug Kit
Tlhahisoleseding ya Sehlahiswa
Litlhaloso
- Lebitso la Sehlahiswa: Lenaneo la CY8CKIT-005 MiniProg4 le Debug Kit
- Nomoro ea MohlalaTlhaloso: CY8CKIT-005
- Khatiso: *D
- Letsatsi: 2023-10-18
Mabapi le Tokomane ena
Tataiso ea CY8CKIT-005 MiniProg4 Program le Debug Kit ke tokomane e felletseng e sebetsang e le tataiso ea ho sebelisa MiniProg4 kit. E fana ka lintlha tse qaqileng mabapi le ts'ebetso ea kit le tlhaloso ea tekheniki ea boto.
LBH
- P: A na nka sebelisa MiniProg4 kit molemong oa khoebo?
- A: Maboto a Tlhatlhobo le Maboto a Litšupiso a fanoeng ke Infineon Technologies a reretsoe tšebeliso ea laboratori 'me e kanna ea se be tse loketseng merero ea khoebo. Ho kgothaletswa ho lekola ho tshwaneleha ha khiti bakeng sa kopo ya hao e itseng.
- P: Nka fumana litokomane tse ling hokae bakeng sa MiniProg4 kit?
- A: Litokomane tse ling, ho kenyeletsoa litataiso tsa basebelisi le litlhaloso tsa tekheniki, li ka fumanoa ho ofisiri webSebaka sa marang-rang sa Infineon Technologies ho www.infineon.com.
- P: Na ho na le mehato ea tšireletso eo ke lokelang ho e nka ha ke ntse ke sebelisa MiniProg4 kit?
- A: Ke boikarabelo ba mosebedisi ho etsa bonnete ba hore tshebediso ya Maboto a Tlhatlhobo le Diboto tsa Ditshupiso ha e bake kotsi efe kapa efe ho batho kapa thepa ya mokga wa boraro. Ka kopo sheba litataiso tsa polokeho tse fanoeng bukeng ea mosebelisi 'me u li latele ka tieo.
- P: Ke lokela ho etsa eng haeba ke kopana le mathata kapa ke na le lipotso tse ling mabapi le lisebelisoa tsa MiniProg4?
- A: Haeba u kopana le mathata afe kapa afe kapa u na le lipotso tse ling, ka kopo ikopanye le tšehetso ea bareki ba Infineon Technologies bakeng sa thuso. Lintlha tsa bona tsa puisano li ka fumanoa ho ofisiri websetsheng kapa ditokomaneng tse fanoeng le khithi.
Mabapi le tokomane ena
Sebaka le morero
Tokomane ena e sebetsa e le tataiso bakeng sa ho sebelisa Lenaneo la CY8CKIT-005 MiniProg4 le Debug Kit. Tokomane e hlalosa ka ts'ebetso ea lisebelisoa le tlhaloso ea tekheniki ea boto. Bamameli ba reriloeng Bakeng sa batho ba nang le thahasello ea ho hlahloba ts'ebetso ea MiniProg4.
Tsebiso ea bohlokoa
"Eavaluation Boards and Reference Boards" e tla bolela lihlahisoa tse kentsoeng ka har'a boto ea potoloho e hatisitsoeng (PCB) bakeng sa lipontšo le/kapa merero ea tlhahlobo, e kenyeletsang, ntle le meeli, lipontšo, liboto tsa litšupiso le tlhahlobo, lisebelisoa le moralo (tseo li bitsoang "Reference". Board"). Maemo a tikoloho a shebiloe moralong oa Maboto a Tlhatlhobo le Liboto tsa Litšupiso tse fanoeng ke Infineon Technologies. Moralo oa Maboto a Tlhatlhobo le Liboto tsa Litšupiso o lekoa ke Infineon Technologies feela joalokaha ho hlalositsoe tokomaneng ena. Moralo ha o tšoanelehe ho latela litlhoko tsa polokeho, tlhahiso le ts'ebetso holim'a mefuta eohle ea mocheso oa ts'ebetso kapa bophelo bohle.
Maboto a Tlhahlobo le Maboto a Litšupiso a fanoeng ke Infineon Technologies a tlas'a tlhahlobo ea ts'ebetso feela tlas'a maemo a tloaelehileng a mojaro. Li-Boto tsa Tlhahlobo le Li-Reference Boards ha li tlas'a mekhoa e ts'oanang le lihlahisoa tse tloaelehileng mabapi le tlhahlobo ea thepa e khutlisitsoeng (RMA), tsebiso ea phetoho ea ts'ebetso (PCN) le ho khaotsa sehlahisoa (PD).
Maboto a Tlhatlhobo le Maboto a Litšupiso ha se lihlahisoa tsa khoebo 'me li etselitsoe tlhahlobo le liteko feela. Haholo-holo, li ke ke tsa sebelisoa bakeng sa tlhahlobo ea botšepehi kapa tlhahiso. Ka hona, Maboto a Tlhatlhobo le Maboto a Litšupiso a kanna a se lumellane le CE kapa maemo a ts'oanang (ho kenyeletsoa empa a sa felle feela ho EMC Directive 2004/EC/108 le EMC Act) mme a kanna a se ke a phethahatsa litlhoko tse ling tsa naha eo li sebetsang ho eona. moreki. Moreki o tla etsa bonnete ba hore Maboto ohle a Tlhatlhobo le Maboto a Litšupiso a tla sebetsoa ka tsela e lumellanang le litlhoko tse amehang le maemo a naha eo li sebetsang ho eona.
Maboto a Tlhatlhobo le Maboto a Litšupiso hammoho le tlhaiso-leseling e fanoeng tokomaneng ena e lebisitsoe feela ho basebetsi ba tšoanelehang le ba nang le boiphihlelo, bakeng sa tšebeliso ea laboratori, 'me e tla sebelisoa le ho laoloa ho latela lipehelo le maemo a boletsoeng tokomaneng ena le ho tse ling tse amanang le ona. litokomane tse fanoeng le Boto ea Tlhahlobo kapa Boto ea Litšupiso.
Ke boikarabelo ba mafapha a botekgeniki a moreki ho lekola ho tshwaneleha ha Maboto a Tlhatlhobo le Diboto tsa Ditshupiso bakeng sa kopo e reretsweng, le ho lekola bonnete le ho nepahala ha tlhahisoleseding e fanoeng tokomaneng ena mabapi le kopo e jwalo. Moreki o tlamehile ho etsa bonnete ba hore tšebeliso ea Maboto a Tlhatlhobo le Maboto a Litšupiso ha e bake kotsi leha e le efe ho batho kapa thepa ea batho ba bang.
Maboto a Tlhatlhobo le Maboto a Litšupiso le tlhaiso-leseling efe kapa efe e tokomaneng ena e fanoe "joalo ka ha e le" mme Infineon Technologies ha e fane ka litiisetso life kapa life, tse boletsoeng kapa tse boletsoeng, ho kenyeletsoa, empa ho sa felle feela ho litiisetso tsa ho se tlolo ea litokelo tsa mokha oa boraro le litiisetso tse boletsoeng tsa ho itekanela bakeng sa mang kapa mang. morero, kapa bakeng sa thekiso.
Infineon Technologies e ke ke ea ikarabella bakeng sa litšenyehelo leha e le life tse bakoang ke tšebeliso ea Maboto a Tlhahlobo le Liboto tsa Litšupiso le/kapa tlhahisoleseding efe kapa efe e fanoeng tokomaneng ena. Moreki o tlamehile ho sireletsa, ho qosa le ho boloka Infineon Technologies e se kotsi ho tsoa le khahlanong le likopo leha e le life kapa litšenyehelo tse bakoang ke tšebeliso leha e le efe ea eona. Infineon Technologies e na le tokelo ea ho fetola tokomane ena le/kapa tlhahisoleseding efe kapa efe e fanoeng mona ka nako efe kapa efe ntle le tsebiso e eketsehileng.
Mehato ea tšireletso
Mehato ea tšireletso
Hlokomela: Ka kopo hlokomela litemoso tse latelang mabapi le likotsi tse amanang le sistimi ea ntlafatso.
Lethathamo la 1 Litlhokomelo tsa polokeho
Tlhokomeliso: Boto ea tlhahlobo kapa ea litšupiso e na le likarolo le liphutheloana tse amehang ho tsoa ha electrostatic discharge (ESD). Tlhokomelo ea taolo ea electrostatic ea hlokahala ha ho kenya, ho lekoa, ho sebeletsa kapa ho lokisa kopano. Tšenyo ea karolo e ka hlaha haeba mekhoa ea taolo ea ESD e sa lateloe. Haeba u sa tloaelane le mekhoa ea ho laola motlakase, sheba libuka le litataiso tse sebetsang tsa ts'ireletso ea ESD.
Selelekela
Setšoantšo sa 1 MiniProg4
Lenaneo la MiniProg4 le Debug Kit ke sebatli sa bohle-in-one le debugger bakeng sa lisebelisoa tsa PSoC™ 4, PSoC™ 5LP, le PSoC™ 6 MCU. MiniProg4 e fana ka ts'ebetso ea borokho ea USB-I2C, USB-SPI le USB-UART. MiniProg4 e fana ka tšobotsi e khethehileng e nolofalletsang basebelisi ho ngola firmware ea bona ea tloaelo ka mokhoa oa kopo oa tloaelo.
Hlokomela:Le JTAG protocol ea ho etsa mananeo le ho lokisa liphoso e tšehetsoa feela ho CY8CKIT-005-A revision ea Miniprog4.
Likahare tsa Kit
Lenaneo la CY8CKIT-005 PSoC™ MiniProg4 le Debug Kit li kenyelletsa:
- MiniProg4 programmer/debugger
- Thapo ea lithapo tse 10
- USB Type-A ho thapo ea Type-C
- Tataiso ea ho Qala ka Potlako
Mananeo le Debugging
MiniProg4 programmer/debugger e fana ka monyetla oa ho sebetsa le SWD kapa JTAG lenaneo le debugging segokanyimmediamentsi sa sebolokigolo. MiniProg4 e ts'ehetsa lisebelisoa tsa 32-bit Arm® Cortex®-M0/M0+/M3/M4 PSoC™. MiniProg4 debugger e tšehetsoa ke lisebelisoa tsa software PSoC™ Creator, ModusToolbox™ software, ModusToolbox™ Programming tools, le PSoC™ Programmer.
Ho tsamaisana
MiniProg4 e ts'ehetsa USB-I2C, USB-UART le USB-SPI joalo ka liprothokholo tse tloaelehileng tsa borokho bakeng sa sesebelisoa leha e le sefe. Bokhoni ba ho koala borokho ba MiniProg4 bo sebelisoa ke PSoC™ Creator, software ea ModusToolbox™, ModusToolbox™ Programming tools, PSoC™ Programmer, Bridge Control Panel, le lisebelisoa tse ling. Lisebelisoa tsa ho lokisa lisebelisoa tse kang CAPSENSE™ tuner e fanoeng ke Infineon le tsona li sebelisa bokhoni bona.
Likopano tsa litokomane
Letlapa la 1: Litumellano tsa litokomane bakeng sa litataiso tsa basebelisi
| Kopano | Tšebeliso |
| Courier e Ncha | Lipontšo file libaka, mongolo o kentsoeng ke basebelisi, le khoutu ea mohloli:
C:\…cd\icc\ |
| Mongolo o tšekaletseng | Lipontšo file mabitso le litokomane tsa litšupiso:
Bala ka mohlodifile.hex file ho PSoC™ Designer User Guide. |
| [E na le bracketed, Bold] | E bonts'a litaelo tsa keyboard ka mekhoa: [Kena] kapa [Ctrl] [C] |
| File > Bula | E emela litsela tsa menu:
File > Bula > Morero o Motjha |
| Sebete | E bonts'a litaelo, litsela tsa menu, le mabitso a li-aekhone lits'ebetsong: Tobetsa File ebe o tobetsa Bula. |
| Times New Roman | E hlahisa equation:
2 + 2 = 4 |
| Mongolo ka mabokose a bohlooho | E hlalosa litemoso kapa ts'ebetso e ikhethang ea sehlahisoa. |
Ho kenya MiniProg4
Ho kenya MiniProg4
Setšoantšo sa 3 Tlase view
Khaolo ena e bontša mokhoa oa ho kenya MiniProg4 le software e amanang le eona ea PC.
MiniProg4
Setšoantšo sa 2 Top view
Setšoantšo sa 3 Tlase view
Ho kenya MiniProg4
MiniProg4 programmer/debugger e tšehetsoa ke PSoC™ Programmer, ModusToolbox™ software, ModusToolbox™ Programming tools, le PSoC™ Creator. Lisebelisoa tse ling tse kang Bridge Control Panel, sebelisa PSoC™ Programmer COM lera ho tšehetsa MiniProg4 tshebetso.
Hlokomela: PSoC™ Programmer e sebetsa feela le Windows Operating System leha ho le joalo, ModusToolbox™ Programming tools e tsamaisana le Windows, macOS, le Linux. Ho utloisisa phapang lipakeng tsa lisebelisoa tsa PSoC™ Programmer le ModusToolbox™ Programming, ka kopo bona leqephe la CYPRESS™ Programming Solutions ho. https://www.infineon.com/.
- Khoasolla 'me u kenye lisebelisoa tsa ho hlophisa tsa PSoC™ kapa ModusToolbox™. Latela litaelo tse skrineng ho kenya software. Sesebelisoa se seng le se seng sa lenaneo se tšehetsa karolo e nyane ea lisebelisoa tsa Infineon. Sheba litokomane tsa lisebelisoa tseo e 'ngoe le e 'ngoe e li tšehetsang.
- Qala PSoC™ Programmer kapa ModusToolbox™ Lisebelisoa tsa Lenaneo ebe o hokela MiniProg4 koung ea USB ea komporo u sebelisa thapo ea USB e fanoeng. Ha e hokahane hantle, 'me bakhanni ba kentsoe, Mode LED e ka bulela kapa e tla ba ramping (khanya e ntseng e eketseha butle le ho fokotseha) ho latela mokhoa.
- Hlokomela hore li-driver tsa MiniProg4 li kentsoe ka bo eona.
- Ho kenya MiniProg4
- Ho PSoC™ Programmer, ho hokela boema-kepeng, fenstereng ea Khetho ea Port, tobetsa sesebelisoa sa MiniProg4. Tobetsa ho Connect/Hakolla konopo joalokaha ho bontšitsoe Figure
- Haeba khokahano e atlehile, sesupo sa boemo se hukung e ka tlase ho le letona la fensetere ea PSoC™ Programmer se fetoha se setala ebe se bontša "Hokahane". Hona joale o ka sebelisa MiniProg4 ho hlophisa sesebelisoa seo u se batlang ka ho tobetsa konopo ea Lenaneo.
Setšoantšo sa 4 PSoC™ Programmer: MiniProg4 Connect/Hakolla le Lenaneo
Ho fumana lesedi le fetang lena ka PSoC™ Programmer, sheba Help Topics tlasa Help menu ya PSoC™ Programmer kapa tobetsa [F1].
Ho kenya MiniProg4
Ho ModusToolbox™ Programming lithulusi, ho hokela ho MiniProg4 probe, tobetsa konopo ea Connect/Hakolla joalokaha ho bontšitsoe setšoantšong sa 5.
Haeba kgokelo e atlehile, letshwao la boemo hukung e ka tlase ho le letona la fensetere ya ModusToolbox™ Programming tools le fetoha le letala mme le bontshe “Ho hoketswe”. MiniProg4 e ka sebelisoa ho hlophisa sesebelisoa se shebiloeng ka ho tobetsa konopo ea Lenaneo.
Setšoantšo sa 5 MiniProg4 Connect/Hakolla le lenaneo
Ho tseba haholoanyane ka lisebelisoa tsa ModusToolbox™ Programming, bona View Thusa tlasa menu ya Thuso ho ModusToolbox™ Programming tools kapa tobetsa [F1].
Li-LED tsa MiniProg4
MiniProg4 e na le li-LED tse tharo tse bontšang - Mode (Amber), Boemo (Botala), le Phoso (Bokhubelu) joalokaha ho bontšitsoe setšoantšong sa 6. Letlapa la 2 le bontša boitšoaro ba li-LED tsena bakeng sa ts'ebetso e sa tšoaneng.
Setšoantšo sa 6 MiniProg4 LEDs
Lethathamo la 2 la boemeli ba LED bakeng sa ts'ebetso e fapaneng ea MiniProg4
|
Mokhoa oa ho etsa mananeo |
Boemo ba mananeo | Li-LED tse tharo | ||
| Letšoao la mokhoa (Amber LED) | Letšoao la boemo 1 (LED e tala) | Letšoao la boemo 2 (LED e khubelu) | ||
|
CMSIS-DAP PATELA |
Lenaneo |
Rampka (1 Hz) |
8 Hz | TLOA |
| Katleho | ON | TLOA | ||
| Phoso | TLOA | ON | ||
| Qetello | TLOA | TLOA | ||
|
Bongata ba CMSIS-DAP |
Lenaneo |
ON |
8 Hz | TLOA |
| Katleho | ON | TLOA | ||
| Phoso | TLOA | ON | ||
| Qetello | TLOA | TLOA | ||
| Bootloader | N/A | 1 Hz | TLOA | TLOA |
| Sesebelisoa se ikhethileng | N/A | 8 Hz | ON | ON |
Likonopo tsa MiniProg4
MiniProg4 e na le likonopo tse peli tse nolofalletsang ho fetoha lipakeng tsa mekhoa e fapaneng ea ts'ebetso. Setšoantšo sa 7 se bontša sebaka sa likonopo. E le hore u utloisise ho fetola mekhoa ea MiniProg4, bona Setšoantšo sa 8. Ha u sebelisa matla, MiniProg4 e ho CMSIS-DAP/BULK ka mokhoa oa kamehla. Haeba konopo ea Mode Select e hatelloa, MiniProg4 e kenya mokhoa oa CMSIS-DAP/HID. Haeba konopo ea Custom App e hatelloa, MiniProg4 e kena ka mokhoa o tloaelehileng oa kopo, moo mosebedisi a ka tsamaisang likopo tsa hae tsa tloaelo ho MCU e fumanehang ho MiniProg4, bona Setšoantšo sa 8. Bakeng sa lintlha tse mabapi le lipontšo tsa LED tsa mefuta e sa tšoaneng ea MiniProg4, bona Letlapa la 2. .
Tlhaloso ea tekheniki
MiniProg4 ke sesebelisoa sa phetolelo ea protocol. Ka MiniProg4, software e amohelang PC e ka buisana ka koung ea USB ho sesebelisoa se reretsoeng ho hlophisoa kapa ho lokisoa, joalo ka ha ho bonts'itsoe ho Setšoantšo sa 9. Lethathamo la 3 le thathamisa liprothokholo tse tšehetsoeng ke sehokelo ka seng. MiniProg4 e nolofalletsa puisano le lisebelisoa tse lebisitsoeng ho sebelisa I/O voltagho tloha ho 1.5 ho isa ho 5 V.
Setšoantšo sa 9 Setšoantšo sa block block ea tsamaiso
Lethathamo la 3 Ts'ehetso ea Lihokelo / Khokahano ea Khokahano
| Sehokedi | SWD | JTAGa) | I2C | SPI | UART
(e nang le taolo ea phallo le ntle le eona) |
| 5-phini | E tšehelitsoe | N/A | N/A | N/A | N/A |
| 10-phini | E tšehelitsoe | E tšehelitsoe | N/A | N/A | N/A |
| 6 × 2 hlooho | N/A | N/A | E tšehelitsoe | E tšehelitsoe | E tšehelitsoe |
a) JTAG e tšehetsoa feela ho CY8CKIT-005-A.
Li-interface
SWD/JTAG
Lisebelisoa tse thehiloeng ho Arm® li tšehetsa Serial Wire Debug (SWD) le JTAG liprothokholo. Malapa a lisebelisoa tsa PSoC™ 4, PSoC™ 5LP, le PSoC™ 6 MCU a sebelisa litekanyetso tsena, tse fanang ka mesebetsi ea ho hlophisa le ho lokisa liphoso. MiniProg4 e ts'ehetsa ho hlophisa le ho lokisa liphoso tsa PSoC™ 4, PSoC™ 5LP, le lisebelisoa tsa PSoC™ 6 tse sebelisang SWD le J.TAG ka sehokelo sa 5-pin kapa 10-pin. Pele o kenya lenaneo ho sesebelisoa sa PSoC™ 4, PSoC™ 5LP, kapa PSoC™ 6 MCU, litlhoko tsa ho hokela motlakase letlapeng la database la sesebelisoa ka ho fapana lia tsosolosoa.viewed kapa ho PSoC™ 4, PSoC™ 5LP, le lintlha tsa lenaneo la sesebelisoa sa PSoC™ 6 MCU. Lethathamo la li-database le litlhaloso tsa lenaneo ke tse latelang:
www.infineon.com/PSoC4
www.infineon.com/PSoC5LP
www.infineon.com/PSoC6
I2C
I2C ke maemo a tloaelehileng a serial interface. E sebelisoa haholo-holo bakeng sa puisano pakeng tsa li-microcontrollers le li-IC tse ling ka boto e le 'ngoe empa hape e ka sebelisoa bakeng sa puisano ea intersystem. MiniProg4 e sebelisa I2C multimaster host controller e lumellang sesebelisoa ho fapanyetsana data le lisebelisoa tse nolofalitsoeng ke I2C botong e shebiloeng. Bakeng sa mohlalaampLeha ho le joalo, sesebelisoa sena se ka sebelisoa ho tsamaisa meralo ea CAPSENSE™. MiniProg4 e sebetsa e le borokho ba USB-I2C (e sebetsa joalo ka I2C master) e ka sebelisoang ho buisana le lisebelisoa tsa makhoba tsa I2C ka software ea Bridge Control Panel. Bakeng sa likhokahano tsa I2C sebelisa sehokelo sa 6×2. MiniProg4 e na le lihanyetsi tse hulang ka hare 'me e tšehetsa I2C ka lebelo ho fihla ho 1 MHz.
SPI
Sebopeho sa serial peripheral interface (SPI) ke mokhoa oa puisano oa serial o sebelisoang bakeng sa puisano ea sebaka se khuts'oane, haholo-holo lits'ebetsong tse kenyelelitsoeng. Lisebelisoa tsa SPI li buisana ka mokhoa o felletseng oa duplex li sebelisa meralo ea makhoba a master e nang le monghali a le mong. MiniProg4 e sebetsa e le borokho ba USB-SPI (bo sebetsa joalo ka SPI master) bo ka sebelisoang ho buisana le sesebelisoa sa makhoba sa SPI ka software ea Bridge Control Panel. Bakeng sa likhokahano tsa SPI, sebelisa sehokelo sa 6×2. MiniProg4 e ts'ehetsa lebelo la SPI ho fihla ho 6 MHz.
UART e nang le taolo ea phallo le ntle le eona
UART ke e 'ngoe e tloaelehileng ea serial interface standard. MiniProg4 e ts'ehetsa UART, e lumellang sesebelisoa ho fumana data ho tsoa ho lisebelisoa tse nolofalitsoeng tsa UART botong e shebiloeng. MiniProg4 e fana ka puisano ea UART ka bobeli le ntle le taolo ea phallo ea hardware. E le ho nolofalletsa taolo ea phallo, li-pin tsa RTS le tsa CTS li fanoa sehloohong sa 6 × 2 I / O. Haeba taolo ea phallo e sa hlokahale, lithakhisa tsa CTS le RTS li ka tloheloa li phaphametse. Li-emulator tsa terminal tse kang Tera Term kapa PuTTY li ka sebelisoa ho buisana le sesebelisoa sa PSoC™ se shebiloeng. MiniProg4 e ts'ehetsa lebelo la UART ho fihla ho 115200 Baud Rate.
Referense
Bakeng sa tlhaiso-leseling e batsi ka PSoC™ 4, PSoC™ 5LP, le PSoC™ 6 MCU's J.TAG, SWD, le I2C interfaces, bona PSoC™ 4, PSoC™ 5LP, le PSoC™ 6 Technical Reference Manual. Bakeng sa lintlha tse ling ka MiniProg4 e nang le Panel ea Taolo ea Borokho, sheba tokomane ea Thuso ea Panel ea Taolo ea Borokho.
Lihokelo
5-pin sehokelo
Sehokelo sa 5-pin se hlophisitsoe joalo ka mola o le mong o nang le molumo oa 100-mil. Nomoro ea karolo ea sehokelo sa ho nyalana ke Molex Connector Corporation 22-23-2051.
Setšoantšo sa 10 sehokelo sa 5-pin se nang le likabelo tsa phini
Hlokomela: Haeba moralo o hloka hore MiniProg4 e hokeloe ka kotloloho botong e shebiloeng ka hlooho ea li-pini tse 5, ho tla fanoa ka tumello e lekaneng ea mochini haufi le hlooho ea 5-pin botong e shebiloeng. Bophara le bophahamo ba MiniProg4 (5-pin header area) ke 25 mm × 13 mm. Haeba moralo o sa khone ho kopana le tumello e hlokahalang ea mochini, sebelisa hlooho e nang le stackable (joalo ka Proto-PIC 20690).
10-pin sehokelo
Sehokelo sa 10-pin se hlophisitsoe joalo ka mola o habeli o nang le molumo oa 50-mil. E sebelisoa ka thapo ea ribone (e fanoeng) ho nyalana le sehokelo se tšoanang holim'a boto e shebiloeng. Mosebetsi oa pontšo o bontšoa ho Setšoantšo sa 11. Nomoro ea karolo ea sehokelo sa ho nyalana e sisintsoeng ke CNC Tech 3220-10-0300-00 kapa Samtec Inc. FTSH-105-01-F-DV-K-TR.
Setšoantšo sa 11 sehokelo sa 10-pin se nang le likabelo tsa phini
Tlhaloso ea tekheniki
Letlapa la 4 le bonts'a kakaretso ea liprothokholo le likabelo tse amanang le phini. 'Mapa oa phini o boetse o bontšoa ka morao ho nyeoe ea MiniProg4.
Lethathamo la 4 likabelo tsa phini tsa protocol ea puisano
| Protocol | Letshwao | 5-phini | 10-phini |
|
SWD |
SDIO | 5 | 2 |
| TS'ELISO | 4 | 4 | |
| XRES | 3 | 10 | |
|
JTAGa) |
TMS | N/A | 2 |
| TCK | N/A | 4 | |
| TDO | N/A | 6 | |
| TDI | N/A | 8 | |
| XRES | N/A | 10 |
a) JTAG e tšehetsoa feela ho CY8CKIT-005-A.
6×2 sehokelo
Sehokelo sena se ts'ehetsa liprothokholo tsohle tsa puisano joalo ka I2C, SPI, UART (ka kapa ntle le taolo ea phallo e tšehelitsoeng ke MiniProg4). Setšoantšo sa 12 se bonts'a likabelo tsa phini. Li boetse li bonts'oa ka morao ho nyeoe ea MiniProg4.
Setšoantšo sa 12 6×2 likabelo tsa phini tsa sehokelo
Matla
MiniProg4 e ka tsamaisoa ho sebelisoa sebopeho sa USB. Ho li-kits/boards moo ho nang le matla a le mong bakeng sa boto kaofela, MiniProg4 e ka fana ka matla ho boto. Leha ho le joalo, phepelo ena e lekanyelitsoe ho hoo e ka bang 200 mA, 'me e sirelelitsoe khahlano le ho huloa ho feteletseng hona joale. O ka khetha 1.8 V, 2.5 V, 3.3 V, kapa 5 V ho tsoa ho PSoC™ Programmer. Phepelo ea 5 V e ka fapana lipakeng tsa 4.25 V–5.5 V, hobane e fanoa ka kotloloho ho tsoa koung ea USB. Phapang e phahameng ka ho fetisisa bakeng sa voltagke + 5%. Tlhokomeliso: Malapa a mang a lisebelisoa tsa PSoC™ ha a tšehetse ts'ebetso ea 5 V. Sheba lethathamo la lisebelisoa tse amehang bakeng sa voltage khetho.
Moqtagkhatello ea maikutlo e fetang meeli e amohelehang e ka senya MiniProg4 ka ho sa feleng. Matshwao a mananeo a ka mamella over-voltage ho fihlela ho boholo ba 12 V le bonyane ho fihla ho -5 V. Lipontšo tsa borokho ba puisano (I2C, UART & SPI) li ka mamella over-voltage fihla ho 6 V feela le bonyane ho fihla ho -1 V.
Sehlomathiso
Tlhahisoleseding ea Tumellano ea Taolo
Lenaneo la CY8KCIT-005 MiniProg4 le Debug Kit li lumellana le CE-Low Vol.tage Tlhokahalo ea polokeho ea Directive 2006/95/EC (Europe). E lekoa le ho netefatsoa hore e tsamaisana le melaoana e latelang ea khokahano ea motlakase (EMC).
- CISPR 22 - Metsi
- EN 55022 Sehlopha sa A - Immunity (Yuropa)
- CE – EMC Directive 2004/108/EC
- Phatlalatso ea CE ea Conformity
Nalane ea ntlafatso
| Phetolelo ea litokomane | Letsatsi la ho lokolloa | Tlhaloso ea liphetoho |
| ** | 2018-10-31 | Tataiso e ncha ea lisebelisoa. |
|
*A |
2018-11-08 |
E ntlafalitsoe "Ho kenya MiniProg4": E ntlafalitsoe "Ho kenya MiniProg4": Tlhaloso e ntlafalitsoeng.
E ntlafalitsoe Setšoantšo sa 4. |
| *B | 2019-05-24 | Lintlha tse ntlafalitsoeng tsa Copyright. |
|
*C |
2023-07-28 |
E ntlafalitsoe “Selelekela”:
Tlhaloso e ntlafalitsoeng. E ntlafalitsoe "Programming le Debugging": Tlhaloso e ntlafalitsoeng. E ntlafalitsoe "Tlhaloso ea tekheniki": E ntlafalitsoe Setšoantšo sa 9. E ntlafalitsoe Lethathamo la 3. E ntlafalitsoe "Li-interfaces" leqepheng la 13: E ntlafalitsoe “SWD/JTAG”: E fetoletsoe "SWD" ka "SWD/JTAG” sehloohong. Tlhaloso e ntlafalitsoeng. E ntlafalitsoe "Lihokelo" li butsoe: E ntlafalitsoe "10-pin sehokelo": E ntlafalitsoe Lethathamo la 4. |
|
*D |
2023-10-18 |
Li-hyperlink tse ntlafalitsoeng ho pholletsa le tokomane.
E fetoletsoe "CYPRESS™ Programmer" ka "ModusToolbox™ Programming tool" maemong ohle ho pholletsa le tokomane. E ntlafalitsoe "Ho kenya MiniProg4": E ntlafalitsoe "Ho kenya MiniProg4": Tlhaloso e ntlafalitsoeng. E ntlafalitsoe Setšoantšo sa 5 (Mangolo a ntlafalitsoeng feela). E ntlafalitsoe "Likonopo tsa MiniProg4": Tlhaloso e ntlafalitsoeng. E ntlafalitsoe "Tlhaloso ea tekheniki": E ntlafalitsoe "Li-interface": E ntlafalitsoe “SWD/JTAG”: Tlhaloso e ntlafalitsoeng. E ntlafalitsoe “Reference”: Tlhaloso e ntlafalitsoeng. E ntlafalitsoe “Matla”: Tlhaloso e ntlafalitsoeng. E falletse ho template ea Infineon. Ho phethela Sunset Review. |
Matšoao a khoebo
Mabitso ohle a sehlahisoa kapa litšebeletso le matšoao a khoebo ke thepa ea beng ba tsona.
TEMOSO
Ka lebaka la litlhoko tsa tekheniki lihlahisoa li ka ba le lintho tse kotsi. Ho fumana leseli ka mefuta eo ho buuoang ka eona ka kopo ikopanye le ofisi e haufi le uena ea Infineon Technologies. Ntle le ha e amohetsoe ka tsela e 'ngoe ke Infineon Technologies tokomaneng e ngotsoeng e saennweng ke baemeli ba lumelletsoeng ba Infineon Technologies, lihlahisoa tsa Infineon Technologies li kanna tsa se sebelisoe lits'ebetsong leha e le life moo ho hloleha ha sehlahisoa kapa litlamorao tsa tšebeliso ea sona ho ka lebelloang ho ba teng. kotsi ya motho.
BOHLOKOA TSEBISO
Lintlha tse fanoeng tokomaneng ena ha ho ketsahalo e tla nkuoa e le tiisetso ea maemo kapa litšobotsi ("Beschaffenheitsgarantie"). Mabapi le examplintlheng, likeletso kapa boleng bo bong le bo bong bo boletsoeng mona le/kapa tlhahisoleseling efe kapa efe mabapi le ts'ebeliso ea sehlahisoa, Infineon Technologies e hanela litiisetso tsohle le mekoloto ea mofuta ofe kapa ofe, ho kenyeletsoa ntle le moeli litiisetso tsa ho se tlolo ea molao litokelo tsa thepa ea mahlale tsa karolo efe kapa efe ea boraro. mokete. Ho feta moo, tlhahisoleseding efe kapa efe e fanoeng tokomaneng ena e ipapisitse le boitlamo ba moreki bo boletsoeng tokomaneng ena le litlhokahalo life kapa life tse sebetsang tsa molao, litloaelo le litekanyetso mabapi le lihlahisoa tsa moreki le tšebeliso efe kapa efe ea sehlahisoa sa Infineon Technologies likopong tsa moreki.
Lintlha tse teng tokomaneng ena li reretsoe feela basebetsi ba koetlisitsoeng ka botekgeniki. Ke boikarabello ba mafapha a botekgeniki a moreki ho lekola ho tšoaneleha ha sehlahisoa bakeng sa ts'ebeliso e reriloeng le botlalo ba tlhaiso-leseling ea sehlahisoa e fanoeng tokomaneng ena mabapi le ts'ebeliso e joalo.
- Khatiso: 2023-10-18
- E hatisitsoe ke: Infineon Technologies AG 81726 Munich, Jeremane
- © 2023 Infineon Technologies AG. Litokelo tsohle li sirelelitsoe.
- O na le potso mabapi le tokomane ee?
- Email: erratum@infineon.com
- Referense ea litokomane: 002-19782 Moruti *D
Litokomane / Lisebelisoa
 |
infineon CY8CKIT-005 MiniProg4 Program le Debug Kit [pdf] Bukana ea Mosebelisi CY8CKIT-005 MiniProg4 Program le Debug Kit, CY8CKIT-005, MiniProg4 Program le Debug Kit, Programme Debug Kit, Debug Kit, Kit |
