IDEC MQTT Sparkplug B e nang le Lgnition User Guide

Ho etsa hore MQTT/SparkPlug e sebetse, kenya li-module tse hlokahalang ka Config -> SYSTEM -> Modules.
Kgetha le ho kenya mojule o jarollotsweng ho kopanya tshehetso ya MQTT.

Ho fetola Sebopeho sa Seva sa OPC-UA

Kamora ho kenya li-module tsa MQTT, lokisa seva sa OPC-UA ka ho ea ho Config -> OPC UA -> Litlhophiso tsa seva.
Sheba lebokose la "Show advanced properties" 'me u nolofalletse 'Expose Tag Bafani ba ho phethela seta.

Tlhophiso ea ho Ignition & Setup

Khoasolla le ho kenya Ignition

Khoasolla Ignition e ka phethisoang mona.
https://inductiveautomation.com/downloads/ignition
Download the file bakeng sa sethala seo u se sebelisang.
Sheba mona bakeng sa litaelo tsa ho kenya.
https://docs.inductiveautomation.com/display/DOC81/Installing+and+Upgrading+Ignition
Bakeng sa lits'ebetso tse seng tsa Windows, ho na le lihokela tsa litaelo bakeng sa Linux le macos, ka ho latellana.

Kenya Ignition

Khoasolla sesebelisoa ho tsoa leqepheng la rona la Lits'oants'o.
Matha setlhophiso 'me u latele mehato ea wizate ea ho instola.
- Tobetsa mona haeba u kenya Linux…
- Tobetsa mona haeba u kenya ho macOS…

Litaelo tsa ho seta bakeng sa ho sebelisoa

MQTT/Sparkplug B e nang le Ignition

Ho kena ho Ignition

Kamora ho kenya, kenya sena URL ho sebatli ho fihlella port 8088 komporong e sebelisang Ignition.
http://localhost:8088/

Latela mehato ebe o tobetsa "Finish Setup".
Ka mor'a moo, sena se tla hlahisa skrine ea pele ea Ignition joalokaha e bontšitsoe ka tlase.
Ha skrine ea pele e hlaha, tobetsa konopo ea "Log In" k'honeng e kaholimo ho le letona ho kena.

Lebitso la mosebelisi le password tse sebelisitsoeng ho kena li tšoana le tse nakong ea ho kenya Ignition.

Ho sebelisa MQTT/Sparkplug B e nang le Ignition

Ho khantša ha ho tšehetse MQTT kapa SparkPlug boemong ba eona ba pele (hang ka mor'a ho kenya).

MQTT/SparkPlug e ka tšehetsoa ka ho kenya module ea MQTT e eketsehileng. - Mojule oa MQTT o ka khoasolloa mona.
- https://inductiveautomation.com/downloads/third-party-modules/
- Ho na le li-module tsa MQTT tse 'ne tse fanoeng ke Ignition.
  - Distributor Module le Engine Module li tlameha ho kenngoa.
- (Ho hlokahala) MQTT Distributor Module
  - Kenya ts'ebetso ea barekisi ba MQTT ho Ignition.
- (Ho hlokahala) MQTT Engine Module
  - Eketsa bokhoni ba ho hokahanya broker ea MQTT (Distributor Module) le Ignition
- (Boikhethelo) MQTT Transmission Module
  - Kenya ts'ebetso ea node ea MQTT (Mohatisi/Mongolisi).
  - Haeba Ignition e sebelisoa e le SCADA, e tla sebetsa ntle le eona (e hlokeha haeba e le ka lehlakoreng la sesebelisoa)
- (Ho ikhethela) MQTT Recorder Module
  - Kenya haeba u batla ho theha nalane ea data e hlahisitsoeng ke MQTT Sparkplug.
Bakeng sa mojule oa MQTT, bula "Config" ea Ignition -> "SYSTEM" -> "Modules".

Tobetsa "Kenya kapa Ntlafatsa Module ...". Tobetsa "Kenya kapa Ntlafatsa Module ...".
Khetha mojule o jarollotsoeng ebe o tobetsa konopo ea "Install" ho qala ho instola.

Ha ts'ebetso e felile, skrine ea Module Configuration e bonts'a li-module tse kentsoeng.
Ka mor'a ho kenya li-module tse amanang le MQTT, tlhophiso ea seva sa OPC-UA e tlameha ho fetoloa le ho tsosolosoa. (hobane MQTT e tšoaroa joalo ka ntho ea OPC-UA)

Ho seta botjha seva sa OPC-UA, khetha "Config", "OPC UA", "Settings Server" 'me u hlahlobe lebokose la "Show advanced properties".
E latelang, bula "Expose Tag Bafani” lebokose la tlhahlobo
Seta seva ea OPC-UA bocha ka mor'a ho fetola litlhophiso. Ho seta bocha, bula "Config" -> "SYSTEM" -> "Modules

Tobetsa konopo ea "restart" ho le letona la "OPC-UA.
Qalong, data e ka romelloa ho tloha node ea MQTT (lehlakoreng la sesebelisoa) ho ea ho Ignition, empa eseng ka lehlakoreng le ka morao (node ea Ignition ho MQTT).
Sena se ka koaloa ka ho seta Ho etsa sena, bula "Config" -> "MQTT ENGINE"- > "Settings" 'me u se ke oa hlahloba "Block Node Commands" (bakeng sa Node) le "Thibela Litaelo tsa Sesebelisoa" (bakeng sa Lisebelisoa) ho "Litlhophiso tsa Taelo.
Mojule oa MQTT Distributor o bapala karolo ea morekisi oa MQTT, empa ha o fumaneha ho tsoa ho node ea MQTT (sesebelisoa), netefatso e etsoa ka lebitso la mosebelisi le password.
Lebitso lena la mosebelisi le senotlolo li behiloe ho "Config" -> "MQTT DISTRIBUTOR" -> "Settings" -> "Basebelisi".
Ho theha mosebelisi e mocha, tobetsa "Etsa Basebelisi ba MQTT ba bacha ..." skrineng sena. Tobetsa "Theha Basebelisi ba bacha ba MQTT ..." skrineng sena ho theha mosebelisi e mocha.
Ha o theha mosebelisi e mocha, o beha lebitso la mosebelisi le password, empa hape o beha litokelo (ACLs) bakeng sa mosebelisi enoa.
Ho lumella phihlello ea ho bala/ho ngola lihloohong tsohle tsa ak'haonte ea mosebelisi eo u e behang, beha "RW #".

Mokhoa oa ho hlahloba puisano ea MQTT

Kamora ho kenya li-module tse amanang le MQTT le ho hlophisoa ha OPC-UA ho phethetsoe, u tla khona ho hlahloba li-parameter tse amanang le MQTT e le lintho tsa OPCUA.
Bula "Config" -> "OPC CLIENT" -> "OPC Quick Client",
Eketsa sefate ka tatellano ea "Ignition OPC UA Server"> "Tag Bafani"> "MQTT Engine".
Li-node tse hokahaneng ke Sparkplug li bonts'oa tlasa "MQTT Engine"

Lipotso Tse Botsoang Hangata

P: Nka fumana sebopeho sa Ignition joang ka mor'a ho kenya?
A: Kenya feela http://localhost:8088/ ka a web sebatli ho kena le ho fihlella Ignition.

P: Ke li-module life tsa MQTT tse hlokahalang bakeng sa Ignition?
A: Li-module tse hlokahalang li kenyelletsa MQTT Distributor le MQTT Engine, tse nang le li-module tsa boikhethelo tse kang MQTT Transmission le MQTT Recorder.

Litokomane / Lisebelisoa

IDEC MQTT Sparkplug B e nang le Lgnition [pdf] Bukana ea Mosebelisi
MQTT Sparkplug B e nang le Lgnition, MQTT, Sparkplug B e nang le Lgnition, e nang le Lgnition, Lgnition

Litšupiso

Bukana ea Mosebelisi

IDEC MQTT Sparkplug B e nang le Lgnition

Tlhahisoleseding ya Sehlahiswa

Litaelo tsa Tšebeliso ea Sehlahisoa