IDEC FC6A-J8A1 8pt Moqtage Hajoale Input Mod
Litlhaloso
- Sehlahisoa: IDEC FC6A Plus PLC
- Sistimi ea Ts'ebetso: Windows 10/Windows 11
- Phepelo ea motlakase: 24V DC
- Connectivity: 2 Ethernet ports (Port 1 used for AWS IoT Core)
Boitsebiso ba Tokomane
Nalane ea ntlafatso ea litokomane
Lisebelisoa tse sebetsang tsa tataiso ena
Operation System: Windows 10/Windows 11
Fetileview
IDEC FC6A is a multifunctional PLC equipped with powerful IoT capabilities, all within compact hardware.
It supports the MQTT protocol, allowing the PLC to connect to MQTT brokers and cloud services. Additionally, it features a dedicated user interface for connecting to AWS IoT Core, enabling PLC programmers to easily establish communication between the PLC and AWS IoT Core.
Tataiso ena e hlalosa mokhoa oa ho hokela IDEC FC6A Plus PLC ho AWS IoT Core.
Tlhaloso ea Hardware
Datasheet/Brochure
https://us.idec.com/idec-us/en/USD/Programmable-Logic-Controller/Micro-PLC/FC6A-MicroSmart-PLC/c/MicroSmart_FC6A?page=1
Lintho tse fanoeng ke basebelisi
The package for the FC6A Plus CPU unit includes only the CPU unit and the I/O terminal block. Please note that you will need to provide a USB cable (USB-A to USB Mini-B) and a 24V power supply separately.
Lintho tse ka rekoang tsa motho oa boraro
Ha ho letho
Theha Tikoloho ea hau ea Ntlafatso
Ho kenya lisebelisoa (li-IDE, Toolchains, SDKs)
Software ea WindLD ea hlokahala ho hlophisa ts'ebeliso ea PLC. IDEC e fana ka setsi sa Automation Organizer, se kenyeletsang software ea WindLDR. Nomoro ea karolo ea ho reka Automation Organiser ke SW1A-W1C. Ka kopo ikopanye le mofani oa thepa oa IDEC kapa morekisi ea lumelletsoeng oa inthanete.
https://us.idec.com/idec-us/en/USD/Software/Automation-Organizer/p/SW1A-W1C
Set Up Device Hardware
- <Power Supply>
The IDEC FC6A Plus requires a 24V DC power supply. Connect the 24V power supply unit to the connector on the FC6A. - <Internet Connection>
The FC6A Plus has two Ethernet ports. Port 1 is located on the upper side, and Port 2 is on the lower side of the unit. To connect to AWS IoT Core, use Port 1 (upper side).
Set up your AWS account and permissions
If you do not have an existing AWS account and user, refer to the online AWS documentation titled “Set Up Your AWS Account.” To get started, follow the steps outlined in the sections below:
- Ingolise bakeng sa ak'haonte ea AWS
- Theha mosebelisi oa tsamaiso
- Open the AWS IoT Console
Theha Lisebelisoa tsa AWS IoT
Refer to the online AWS documentation at Create AWS IoT Resources. Follow the steps outlined in the sections below to provision resources for your device:
- Create an AWS IoT policy
- Create a Thing object
Fana ka Sesebediswa ka Lintlha
Refer to pages 12 and 18 in the following document.
These sections explain how to download the Root (Server) CA, the certificate file bakeng sa FC6A, le senotlolo sa poraefete file, hammoho le mokhoa oa ho li kenya ho FC6A.
Build the Demo
Refer to pages 1 to 22 in the following document. These pages explain how to connect the FC6A to AWS IoT Core. Follow the step-by-step tutorial to complete the connection process.
Matha Demo
Refer to pages 24 to 31 in the following document for instructions on how to publish and subscribe to data using AWS IoT Core.
Netefatsa melaetsa ho AWS IoT Core
Refer to pages 24 to 31 in the following document for instructions on how to publish and subscribe to data using AWS IoT Core.
https://us.idec.com/idec-us/en/USD/medias/FC6A-MQTT-AWSIoTCore-Training.pdf?context=bWFzdGVyfHJvb3R8MTE3NDA2NnxhcHBsaWNhdGlvbi9wZGZ8aDU4L2hhZC85MTcxNTM4OTAzMDcwLnBkZnw4ODk4ZjcwNGIyNTE2ZTQ0OGZkMjMxMGE2NDUyNzcyNGI5YWMzOWIzOGJmM2JiOTMxYWVmZThkZmVjZDgwMzYw
Ho batle phoso
Refer to page 33 in the following document, which details the MQTT connection error codes.
https://us.idec.com/idec-us/en/USD/medias/FC6A-MQTT-AWSIoTCore-Training.pdf?context=bWFzdGVyfHJvb3R8MTE3NDA2NnxhcHBsaWNhdGlvbi9wZGZ8aDU4L2hhZC85MTcxNTM4OTAzMDcwLnBkZnw4ODk4ZjcwNGIyNTE2ZTQ0OGZkMjMxMGE2NDUyNzcyNGI5YWMzOWIzOGJmM2JiOTMxYWVmZThkZmVjZDgwMzYw
Bakeng sa tlhaiso-leseling e batsi, ka kopo sheba litokomane tsa inthaneteng tsa AWS ho Troubleshooting AWS IoT.
Lipotso Tse Botsoang Hangata
What is the power supply requirement for IDEC FC6APlus?
The IDEC FC6A Plus requires a 24V DC power supply.
Where can I find the necessary software for programming the PLC application?
You can install WindLDR software from the Automation Organizer suite, available for purchase with part number SW1A-W1C.
Which Ethernet port should be used for connecting to AWS IoT Core?
Port 1 (upper side) of the FC6A Plus should be used for connecting to AWS IoT Core.
Litokomane / Lisebelisoa
 |
IDEC FC6A-J8A1 8pt Moqtage Hajoale Input Mod [pdf] Bukana ea Mosebelisi FC6A-J8A1 8pt Moqtage Hajoale Input Mod, FC6A-J8A1, 8pt Moqtage Current Input Mod, Moqtage Current Input Mod, Current Input Mod, Input Mod, Mod |