HUTT W8 E feto-fetohang Frequency Frequency Cleaning Robot

Sehlahisoa se Felletseview

Likaroloana le Mesebetsi

Lethathamo la Likarolo

introduction to standard operation

introduction to Installation

1. Installing the cleaning pad
   1. Stick the white side of the cleaning pad to the machine and keep it smooth to avoid air leakage.
   2. Requirements for sticking the cleaning pad: the cleaning pad shall be placed onto the correct position smoothly, and avoid covering the detection holes at four corners. *Be sure to use a dry cleaning pad, otherwise, there is a risk of falling.
2. Filling water into the water tank
   1. Remove the water tank plug, fill an appropriate amount of pure water or special glass cleaner into the water bottle, pour it into the water tank, and tighten the water tank plug. *The filling content must be non-corrosive liquid. For axample: distilled water, special glass water, pure water, etc. It is recommended to use distilled water or special glass water for a better cleaning result.
3. Ho hokela ho phepelo ea motlakase
   1. Connect the power cord on the machine to the adapter.
   2. Connect the power cord of the plug to the adapter.
   3. Kenya polaka ka har'a sokete ea motlakase.
4. Fixing the safety rope
   1. Check whether the safety rope is damaged. If the safety rope is intact and undamaged, perform the following operations.
   2. Fix the safety rope on a solid, reliable and immovable object, leaving an appropriate length for the machine to work.
   3. It is recommended to circle the object for 1-2 more rounds to ensure the safety.
5. Ho hloekisa mabili
   1. Do not put the machine directly on the floor after use, particles or other substances on the floor will stick onto the cleaning pad or crawlers, which will scratch the glass easily when the machine is putting back into use.
   2. If the wheels of the machine are dirty, please enable the wheel cleaning function.
   3. Hold the machine in your hand and turn it over with the bottom suction inlet upwards, press and hold the power button for 3s, the crawler wheels will rotate slowly, then use a wet tissue to wipe off the dirt on the crawler wheels.
6. Ho qala mochine
   1. it is recommended to spray some window cleaner to the window before use.
   2. Hold the Power button for more than 3S to start the machine.
   3. Make sure the machine has attached to the glass, then release the machine and press the power button for 1S, and the machine starts to work.
7. Ho tlosa mochine
   1. After the wiping work is completed, hold the safety rope with one hand, hold the machine with the other hand and press the power button. Remove the machine after the working sound of the machine is reduced.
      *Note: If the machine is without your reach after wiping the window, please use the remote control to maneuver the machine to a place that is convenient to access by hands, then take down the machine according to the above steps.

Tlhokomelo
When wipe-cleaning the area beneath the cleaning pad, please unplug and turn off the machine.

Washing the cleaning pad

• Remove the cleaning pad, soak it in water at about 200C for 2 minutes, then brush it with a soft brush, do not rub or twist it, please let it dry naturally before use.
• Do not directly use the wet cleaning pad avoid the muhlne slipping during the work.
• Good maintenance will help prolong the life of the cleaning pad.
• When the cleaning pad is aged and annot be closely atuched the Velcro, please replace it in time to achieve the best cleaning effect.

Cleaning the bottom component

• Bottom suction inlet: Wipe with a cleaning
• Anti-drop sensor: Wipe with a cleaning cotton
• Water removing blades: cloth to avoid blockage to the suction inlet. swab to maintain the sensitivity. Wipe with a cleaning cloth to keep them clean.

Instruction to the Remote Control
*Note: Take out the battery of the remote control when the machine will not be used for a long time to avoid battery aging and causing damage to the remote controlattached to the Velcro, please replace it in time to achieve the best cleaning effect.

Litlhokomelo tsa Tšireletso

Ho batle phoso

LED Indicators and Voice Prompts

Tekheniki Parameters

Ntho	Mekhahlelo	Ntho	Mekhahlelo
MohlalaNo.	WA	Capacity of the back up battery	650mAh
E lekantsoe Voltage	24V =	Machine remains attached when the power is off	20metsotso
RatedPower	90W	Fetohang Frequency Suction Range	1850-3800Pa
Boemo ba Lerata	65dB	Capacity of the Water Tank	80ml
Litekanyo tsa Mochini	241*241*83mm	CleaningSpeed	0.0Sm/s
Ho tjhaja Hona Jwale	300mA	Minimum applicable area	400*600mm
Remote Control Operation Frequency	2450Mhz	Remote control Maximum Output Power	4mW

Path Planning Description

When the robot is placed “upright”, the robot will wipe in a “Z” pattern. For example, the following positions are all considered as ‘upright’ placements.

1. The machine moves from the upper left corner to the upper right corner, meanwhile it measures the width of the window and moves to the next line when touching the rightmost edge.
2. The machine continues to wipe along the next line, and starts spraying water intermittently. The space of each line is 1/3 of the machine length
3. The machine wipes line by line until cleaning up the entire window.

When the robot is placed “horizontally”, the robot begins wiping in a “N” pattern. For example, the following positions are considered to be placed “horizontally”. It is recommended to use the “N” pattern to wipe the windows with a narrow frame.

1. After reaching the right frame, the robot rotates and moves upwards, and starts to wipe the window along the line close to the right frame.
2. After wiping upwards and downwards along the right frame, the robot moves leftwards to the next line.
3.  The robot continues to wipe along the next line and starts spraying water intermittently. The water spraying function will be paused if slippage occurs.
4. After finished wiping the entire window, the robot returns to the starting area in an upright position.

Note: If the machine encounters an abnormal frame, it will cause data errors when detecting the distance between edges, resulting in a slight error of position where the robot returns to the starting point, which will not affect the normal use.

Description of the water spraying function

1. The machine is powered on with the default wet-wipping mode.
2. If dry wipe mode is required, directly press the water spray button on the remote control to turn off the water spray function.
3. Under wet wiping mode, the machine sprays water once every 10-15 seconds, and doesn’t spray water during the edge detection process and the line changing process.
4. Under the command of the remote control, the machine does not spray water when it moves upwards/downwards/leftwards/rightwards

Lethathamo la Liphoso

Tlhahisoleseling ea WEEE

Lihlahisoa tsohle tse nang le letšoao lena ke lisebelisoa tsa motlakase le tsa elektroniki tse senyehileng (WEEE joalo ka taelo ea 2012/19/EU) tse sa lokelang ho tsoakoa le litšila tsa ntlo tse sa hlophisoang. Ho e-na le hoo, o lokela ho sireletsa bophelo ba batho le tikoloho ka ho nehelana ka lisebelisoa tsa hau tsa litšila sebakeng se khethiloeng sa pokello bakeng sa ho sebelisoa hape ha litšila tsa lisebelisoa tsa motlakase le tsa elektroniki, tse khethiloeng ke mmuso kapa balaoli ba lehae. Ho lahloa ka nepo le ho e sebelisa hape ho tla thusa ho thibela litlamorao tse ka bang teng tikolohong le bophelong ba batho. Ka kopo, ikopanye le motho ea kenyang thepa kapa balaoli ba lehae bakeng sa tlhaiso-leseling e batsi mabapi le sebaka seo hammoho le lipehelo le lipehelo tsa libaka tse joalo tsa pokello.

Ho lumellana

We Beijing Hutt Wisdom Technology Co., Ltd, hereby declare that this device corresponds to the basic requirements and relevant regulations outlined in guidelines 2014/53/EU, 2011/65/EU. The CE declaration of conformity for this product can be found on the following link: https://us.huttwisdom.com/certificate

Tlhokomeliso ea FCC:

Liphetoho leha e le life kapa liphetoho tse sa amoheloeng ka ho hlaka ke mokha o ikarabellang bakeng sa ho latela melao-motheo li ka senya matla a mosebedisi a ho sebelisa thepa ena.
Sesebelisoa sena se lumellana le karolo ea 15 ea Melao ea FCC. Ts'ebetso e ipapisitse le maemo a mabeli a latelang:

1. sesebelisoa sena se ke ke sa baka tšitiso e kotsi, le
2. sesebelisoa sena se tlameha ho amohela tšitiso efe kapa efe e amohetsoeng, ho kenyeletsoa tšitiso e ka bakang ts'ebetso e sa batleheng.

Sesebelisoa sena le manakana a sona ha lia lokela ho behoa sebakeng se le seng kapa ho sebetsa mmoho le lenakana kapa mochine o fetisang molaetsa.

HLOKOMELA: Thepa ena e lekiloe 'me e fumanoe e lumellana le meeli ea sesebelisoa sa digital sa Sehlopha sa B, ho latela Karolo ea 15 ea Melao ea FCC. Meeli ena e etselitsoe ho fana ka tšireletso e utloahalang khahlanong le tšitiso e kotsi mohahong oa bolulo. Thepa ena e hlahisa, e sebelisa le ho khantša matla a maqhubu a seea-le-moea, 'me haeba e sa kengoa le ho sebelisoa ho latela litaelo, e ka baka tšitiso e kotsi likhokahanong tsa radio. Leha ho le joalo, ha ho na tiiso ea hore tšitiso e ke ke ea etsahala setsing se itseng.
Haeba sesebelisoa sena se baka tšitiso e kotsi ea seea-le-moea kapa kamohelo ea thelevishene, e ka lekanyetsoang ka ho tima le ho tima sesebelisoa, mosebelisi o khothalletsoa ho leka ho lokisa tšitiso ka e le 'ngoe kapa tse ling tsa mehato e latelang:

• Sheba hape kapa o suthise lenakana le amohelang sebakeng se seng.
• Eketsa karohano pakeng tsa thepa le moamoheli.
• Hokela lisebelisoa sebakeng sa seketsoana se fapaneng le seo moamoheli a hokahaneng le sona.
• Ikopanye le morekisi kapa setsebi sa radio/TV se nang le boiphihlelo bakeng sa thuso.

Sesebediswa se hlahlobilwe ho kopana le ditlhoko tse akaretsang tsa kgahlamelo ya RF. Sesebelisoa se ka sebelisoa maemong a ponts'o a nkehang ntle le thibelo.

Litokomane / Lisebelisoa

HUTT W8 E feto-fetohang Frequency Frequency Cleaning Robot [pdf] Bukana ea Mosebelisi 2BHJF-RC-A1, 2BHJFRCA1, W8 Variable Frequency Window Cleaning Robot, W8, Variable Frequency Cleaning Robot, Frequency Window Cleaning Robot, Window Cleaning Robot, Robot ea ho Hloekisa, Robot

Litšupiso

• Bukana ea Mosebelisi