Honeywell AMR 2-Pin PWM Speed le Direction Sensor Integrated Circuit VM721D1 Tataiso ea ho kenya
LINTLHA TSE AKARETSANG
Honeywell's Anisotropic Magnetoresistive (AMR) 2-Pin Pulse Width Modulated (PWM) Speed and Direction Sensor Integrated Circuit (IC) e etselitsoe ho bona lebelo le tataiso ea sepheo sa semenete sa makenete se sebelisang moralo o ikhethileng oa borokho.
Maqhubu a phepelo ea dijithale hajoale a lekana le lebelo la ho potoloha ha sepheo, mme tataiso ea potoloho e kentsoe ka ho tsamaisa bophara ba pulse ea phepelo ea hajoale.
Sensor IC e sebetsa ka lebelo le fapaneng haholo, lithemparetjha le likheo tsa moea.
- Patent e sa emetse
TLHOKOMELO
TShenyo ya Elektroniki ya Tshenyo
- Netefatsa hore mehato e nepahetseng ea ESD ea lateloa ha ho sebetsoa sehlahisoa sena.
- Ho hloleha ho latela litaelo tsena ho ka baka tšenyo ea sehlahisoa.
TLHOKOMELO
LITLHAKU TSA LITLHAKU TSE KHOLO TSA MOTSOALLE HA LI BULA LE HO TSOA HAPE KAPA Mosebetsing o sa lefelloeng oa STATIC.
SOLDERING LE KOPANO
TLHOKOMELO
SEKELETSI SE SEBELE
- Etsa bonnete ba hore lits'oants'o li tšehelitsoe ka nepo nakong ea ts'ebetso ea ho etsa / ho kuta e le hore li se ke tsa hatelloa kahare ho mokotlana oa polasetiki.
- Fokotsa ho pepesehela mocheso o phahameng.
Ho hloleha ho latela litaelo tsena ho ka baka tšenyo ea sehlahisoa
Solder ea leqhubu e fihla ho 250 ° C ho ea ho 260 ° C [482 ° F ho ea ho 500 ° F] ka nako e fetang metsotsoana e meraro. Burrs e lumelloa feela haeba bolelele bo felletseng ba lead bo feta 0,68 mm [0.027 in] dia. lesoba.
PHETLA
TLHOKOMELO
HLOEKISO SEBAKA
- Se ke oa sebelisa khatello ea ho hlatsoa. Molapo o phahameng oa khatello o ka qobella litšila ka har'a sephutheloana.
Ho hloleha ho latela litaelo tsena ho ka baka tšenyo ea sehlahisoa.
- Sebelisa rinse ho ferekanya ho hloekisa kutlo.
Tafole ea 1. Litšobotsi tsa Ts'ebetso (Ho feta phepelo eohle voltage fapana ho -40 ° C, TA, 150 ° C, ntle le haeba ho boletsoe ka hosele)
| Sebopeho | Letšoao | Boemo | Min. | Tlanya. | Max. | Yuniti |
| Phepelo voltage | VS | -40°C ho isa ho 110°C | 4.0 | — | 24 | V |
| 150°C | 4.0 | — | 9.0 | |||
| Phepelo ea hona joale: | ||||||
| hodimo | Mosebetsi | boemo bo phahameng ba dijithale | 12 | 14 | 16 | mA |
| tlase | Mohl | boemo bo tlase ba dijithale | 5.9 | 6.95 | 8.0 | |
| Boemo ba hona joale | — | — | 1.9 | — | — | — |
| Bolelele ba Pulse: | ton | ms | ||||
| pele | tfwd | — | 38 | 45 | 52 | |
| furalla | trev | — | 76 | 90 | 104 | |
| Khumo ho switjha nako: | ms | |||||
| tsoha nako | tr | resistor metering, ha ho bypass capacitor | — | — | 8 | |
| nako ya hotla | tf | resistor metering, ha ho bypass capacitor | — | — | 8 | |
| Ho switjha maqhubu: | ||||||
| pele | ffwd | lekanyelitsoeng ke bolelele ba pulse length | — | — | 14 | kHz |
| furalla | frev | e lekantsoe ke bolelele ba pulse length | — | — | 8 |
Tafole ea 2. Tlhophiso ea Phatlalatso
| Sebopeho | Boemo | Tlhophiso |
| Palo ea methapo ka palo | — | 1 |
| Tsamaiso ea pele | Ho potoloha ho tloha pineng ea 2 ho isa ho pin 1 joalokaha ho bontšitsoe ho Setšoantšo sa 5 | makenete a llang a potolohang ho tloha pineng ea 2 ho isa ho 1 (CCW) |
Tafole ea 3. Litlhoko tsa Kopo (Ka 4.0 V, VS, 24 V, -40 ° C, TA ≤ 150 ° C)
| Sebopeho | Letšoao | Boemo | Min. | Tlanya. | Max. | Yuniti |
| Magnetic flux | B | Dmax, max. lekhalo la moea, max. temp. | ±30 | — | — | Gauss |
| Phallo ea matla a khoheli e nang le sesupo sa tataiso e nepahetseng, jitter e eketsehileng |
B |
Dmax, max. lekhalo la moea, max. temp. |
±10 |
— |
— |
Gauss |
| Metering Resistor | R | — | 10 | 100 ho ea ho 300 | — | Ohm |
Tafole ea 4. Litekanyetso tse felletseng tsa boholo
| Sebopeho | Letšoao | Boemo | Min. | Tlanya. | Max. | Yuniti |
| Mocheso oa ho sebetsa | Ta | — | -40 [-40] | — | Ka 150 [302] | ° C [° F] |
| Mocheso oa mateano | TJ | — | -40 [-40] | — | Ka 165 [329] | ° C [° F] |
| Mocheso oa polokelo | TS | — | -40 [-40] | — | Ka 150 [302] | ° C [° F] |
| Ho hanyetsa mocheso | RqJA | — | — | — | — | °C/W |
| Phepelo voltage | VS | — | -26.5 | — | 26.5 | V |
| Soldering mocheso | — | 3 s, max. | — | — | Ka 260 [500] | ° C [° F] |
| ESD (HBM) | VESD | JEDEC JS-002-2014 | — | — | ±6 | kV |
TSEBISO
Lintlha tse phahameng ka ho fetesisa ke meeli e fetelletseng eo sesebelisoa se tla e mamella nakoana ntle le tšenyo ea sesebelisoa.
Litšobotsi tsa motlakase le mochini ha li netefatsoe haeba ho lekantsoe voltage le / kapa maqhubu a fetile, ebile sesebelisoa ha se na ho sebetsa ka bongata bo felletseng.
Matla a maholo a khelohileng a haufi le sensor a ka ama tšebetso ea sensor hampe.
Palo e kahodimodimo Phepelo Voltage Tekanyetso
Setšoantšo sa 1tage Tekanyetso
Setšoantšo se Thibeloang
Setšoantšo sa 2
Setšoantšo sa 3. Potoloho ea Kopo ea Motheo
Setšoantšo sa 4. Tlhaloso ea Nako ea ho Tsoha le Ho oa
- tr = 10% ho 90% ea nako ea ho phahama
- tf = 90% ho 10% ea nako ea ho oa
Setšoantšo sa 5. Litšobotsi tsa phetisetso
Sensor IC Ho Hlahloba Boemo
Setšoantšo sa 6. Boemo ba Boikoetliso ba Sensor IC
- Radial
- Axial
Litekanyo le ho tšoaea sehlahisoa
Setšoantšo sa 7. Litekanyo le ho tšoaea sehlahisoa (Bakeng sa ho sheba feela mm / [ka])
- Litekanyo
- Letšoao la Sehlahisoa
- Phapang ea Element Edge
TLHOKOMELO
KOTSI EA BOPHELO KAPA HO RUA
Le ka mohla u se sebelise sehlahisoa sena bakeng sa ts'ebeliso e kenyang kotsi e kholo bophelong kapa thepa ntle le ho netefatsa hore sistimi ka kakaretso e etselitsoe ho sebetsana le likotsi, le hore sehlahisoa sena se lekantsoe hantle 'me se kentsoe ts'ebeliso e reriloeng ka har'a sistimi e akaretsang.
Ho hlōleha ho latela litaelo tsena ho ka fella ka lefu kapa kotsi e tebileng.
Warranty / Pheko
Honeywell e fana ka tiiso ea hore thepa ea eona e se ke ea ba le thepa e senyehileng le moetso o fosahetseng nakong ea tiiso. Guarantee ea sehlahisoa se tloaelehileng sa Honeywell e sebetsa ntle le haeba ho lumellanoe ka tsela e ngoe ke Honeywell ka ho ngola; ka kopo sheba kopo ea hau ea tumello kapa o botse ofisi ea hau ea thekiso bakeng sa lintlha tse ikhethang tsa waranti. Haeba thepa e netefalitsoeng e khutlisetsoa Honeywell nakong ea tšireletso, Honeywell o tla lokisa kapa a nkele sebaka, ka khetho ea eona, ntle le tefo ea lintho tseo Honeywell, ka kutloisiso ea hae feela, a fumanang e fosahetse.
Tse boletsoeng kaholimo ke pheko ea moreki mme sebakeng sa li-waranti tse ling kaofela, tse hlahisitsoeng kapa tse boletsoeng, ho kenyeletsoa tsa bokhoni ba mohoebi le ho phela hantle 'meleng ka sepheo se itseng. Ha ho na ketsahalo eo Honeywell a tla ikarabella bakeng sa likotsi tse tla latela, tse khethehileng kapa tse sa tobang.
Le hoja Honeywell a ka ’na a fana ka thuso ea ho etsa kōpo ka boeena, ka lingoliloeng tsa rōna le Honeywell web saeteng, ke boikarabello ba moreki ho fumana hore na sehlahisoa se tšoaneleha ts'ebelisong.
Litlhaloso li ka fetoha ntle le tsebiso. Litaba tseo re fanang ka tsona ho lumeloa hore li nepahetse ebile lia tšepahala ho tloha nakong ea ha re ngola. Leha ho le joalo, Honeywell ha a nke boikarabelo ba tšebeliso ea eona.
Ho fumana lintlha tse ling
Honeywell Advanced Sensing Technologies e sebeletsa bareki ba eona ka marang-rang a liofisi le barekisi lefatšeng ka bophara.
Bakeng sa thuso ea ts'ebeliso, litlhaloso tsa hajoale, litheko kapa Morekisi ea Laetsoeng ea haufi, etela sps.honeywell.com/ast kapa letsetsa:
Asia Pacific + 65 6355-2828
Europe +44 (0) 1698 481481
USA/Canada +1-800-537-6945
Litokomane / Lisebelisoa
 |
Honeywell AMR 2-Pin PWM Speed le Direction Sensor integrated Circuit VM721D1 [pdf] Tlhophiso Tataiso AMR 2-Pin PWM Lebelo le Direction Sensor Integrated Circuit, VM721D1 |
