LCH3BT 3 Channel LED PWM Controller
“
Tlhahisoleseding ya Sehlahiswa
Litlhaloso tsa Tekheniki:
- Palo ea likanale: 3
- Phepelo VoltagE: 12VDC
- Tšebeliso ea hona joale: 15 mA
- Sephetho se phahameng ka ho Fetisisa sa Hajoale ka Channel ka 'ngoe: 2 A
- Kakaretso ea Sephetho sa Hona Joale: 6 A
- Mehato ea PWM bakeng sa Channel ka 'ngoe: 110
- Bophara ba Organ ea Mmala: LF 50-200Hz, MF 200Hz-7kHz, HF
7-14kHz - Line-in Boemo ba Lebitso: 0.3 V RMS / 0.15 V RMS
- Line-in Maximum Level: 1.5 V RMS
- Boemo ba Molumo oa Mic-in: Ka module e ekelitsoeng ea MACL (eseng
e kenyelelitsoe ka har'a kit) - Ambient Mocheso
Likarolo tsa Controller:
- 16 Leseli Show Mananeo
- Taolo ea litlhophiso tsohle le mesebetsi ka konopo e le 'ngoe
- Ts'ebetso ea Light Show e laoloang ke molumo o tsoang ho maekrofono,
Line-in kapa tse sa amaneng - Fully Automatic Color Organ e nang le karohano ea dijithale ea
bandwidth ka mekhahlelo e 3
Litaelo tsa Tšebeliso ea Sehlahisoa
Setšoantšo sa Ts'ebetso ea Motheo le Wiring
Leseli Show Basic Operations:
Lits'ebetso tsohle le litlhophiso li etsoa ka konopo e kentsoeng
ka sekepeng.
| Tshebetso | Ketso |
|---|---|
| Tlanya ha 'ngoe | Lenaneo le latelang |
| Tšoara konopo ka tlase ho metsotsoana e 0.3 | Lenaneo le fetileng |
| Penya habedi/ Penya hararo | Fetoha lipakeng tsa li-program tsa Sound Activated sehlopha / Sequencer ea Leseli sehlopha sa mananeo |
Setšoantšo sa Wiring le Tlhaloso:
Phepelo voltage 12VDC e hokahane le li-terminal blocks
tšoauoa + le -. Tsohle + LED Strip / Module li hokahane hammoho ho
li-terminal blocks tse tšoailoeng + L, le tsohle - LED Strip / Module ho
liteishene 1, 2, 3.
Tlhokomeliso: Lihlahisoa HA li na tšireletso ho
potoloho e kgutshwane kapa moroalo o boima. Khokahano e sa nepahalang e tla lebisa ho
molaoli ea senyehileng.
Hardware Khutlela ho Litlhophiso tsa Feme:
- Tlosa motlakase.
- Tobetsa o hatelle konopo.
- Fetola matla ON. Kamora metsotsoana e 2-3 ha li-LED li bulela.
- Tlosa konopo ebe o qala hape.
Taolo ea Pontšo ea Leseli le Litlhophiso:
Tlhokomeliso: Ha u fetohela ho Lighting mode 2, mocha oa Green
e benya pele bakeng sa metsotsoana e 2.
Ka mokhoa ona, o ka fokotsa khanya ea botala
mocha. Tlhophiso ena e beha boemo bo ka holimo ho mocha o motala
mananeong ohle ntle le mokhoa oa Leseli 1.
| Ketso | Tlhaloso |
|---|---|
| Tlanya ha 'ngoe | Lenaneo le latelang |
| Tšoara konopo ka tlase ho metsotsoana e 0.3 | Lenaneo le fetileng (Sehlopha sa mananeo a kentsoeng molumo / Leseli sehlopha sa mananeo a sequencer) |
Lipotso tse atisang ho botsoa (FAQ)
P: Ke etsa joang ho tsosolosa molaoli ho litlhophiso tsa fektheri?
A: Latela mehato e boletsoeng karolong ea 1.3 ea mosebelisi
tataiso.
P: Na nka hokela li-Strips/Module tsa LED tse ngata ho sena
molaoli?
A: E, o ka hokela + LED Strip/Module kaofela hammoho ho
li-terminal blocks tse tšoailoeng + L, le tsohle - LED Strip/Module ho li-terminals
1, 2, 3.
Q: Ke bokae palo e kahodimodimo kakaretso tlhahiso jwale ya
molaoli?
A: Palo-kakaretso ea kakaretso ea hona joale ke 6 A.
"`
www.homlicon.com
HomLiCon LCH3BT
3 Channel LED PWM Controller
HomLiCon LCH3BT
Kopo
Laola lihlopha tsa LED, li-strip tsa LED, li-module tsa LED. 'Mala Organ, Sound Activated Light Show, Light Sequencer, joalo-joalo.
Litlhaloso tsa Tekheniki
Palo ea Phepelo ea Likanale voltage Ts'ebeliso ea hajoale Boholo bo hlahisoang hona joale ka kanale Bophahamo bo felletseng ba mehato ea hajoale ea PWM bakeng sa kanale ka 'ngoe
Colour Organ bandwidth
Boemo ba mohala (set standart / high sensitivity) Mothalo oa boemo bo holimo Mic-in ea boemo ba molumo (e nang le module e ekelitsoeng MACL – ha e kenyelelitsoe khiti) Mocheso o tikolohong.
3 12 VDC (8 16 VDC)
15 mA 2 A 6 A 110
LF 50-200Hz , MF 200Hz-7kHz , HF 7-14kHz
0.3 V RMS / 0.15 V RMS 1.5 V RMS
60 – 120 dB (ka mojule wa tlatsetso)(1) 5 – 40°C
Likarolo tsa molaoli
16 Light Show mananeo : 2 – Color Organ, 6 – Sound Actived. 8 - Sequencer ea Leseli. Taolo ea litlhophiso tsohle le lits'ebetso ka konopo e le 'ngoe Ts'ebetso ea Light Show e laoloang ke molumo ho tsoa ho maekrofono(1), Line-in kapa e sa amaneng ka ho Fetisisa Organ ea mebala e ikemetseng e nang le karohano ea dijithale ea bandwidth ka mefuta e 3:
LF 50 – 200Hz , MF 200Hz – 7kHz , HF 7 – 14kHz Automatic gain control (AGC) : Line-in > 9dB , Mic-in > 60dB (ka module MACL – boikhethelo). Boloka litlhophiso tsohle le lenaneo la ho qetela le sebelisitsoeng memoring e sa fetoheng Litlhophiso tsa Molumo Mananeo a builoeng : Mic-in , Line-in standard sensitivity, Line-in high sensitivity Settings Sequencer Light Sequencer : lebelo – 6 mehato. Settings Strobe: lebelo - 6 mehato Settings Lebone - 6 maemo a LED ho e 'ngoe le e' ngoe ea liteishene tse hokahaneng le lithakhisa tsa microcontroller bakeng sa pontšo le tlhahlobo ea matla a MOSFET bakeng sa tlhahiso ea mocha o mong le o mong oa 32 MHz microcontroller.
2024 mc-kit.net
Leqephe la 1
www.homlicon.com
HomLiCon LCH3BT
1.0
Ts'ebetso ea mantlha le setšoantšo sa wired
1.1
Leseli Bontša lits'ebetso tsa mantlha
Lits'ebetso tsohle le litlhophiso li etsoa ka konopo e kentsoeng botong.
Tafole e fetoha pakeng tsa mananeo
Tlanya ha 'ngoe
Lenaneo le latelang
Tšoara konopo ka tlase ho metsotsoana e 0.3
Penya habeli
Lenaneo le fetileng
Sehlopha sa mananeo a kentsoeng ka molumo / Sehlopha sa mananeo a ho latela khanya
Nako pakeng tsa ho tobetsa ha ho feta metsotsoana e 0.6 Tšoara konopo ka tlase ho metsotsoana e 0.3
Mananeo a litafole
Mananeo a nang le taolo ea molumo
Mananeo a se nang taolo ea molumo
1
Mokhoa oa ho khantša 1
2
Setho sa 'mala se nang le liphetoho tse boreleli
3
'Mala oa setho sa khale
4
Modumo o kentsweng tshebetsong 1 – VU
5
Modumo o kentswe tshebetsong 2
6
Modumo o kentswe tshebetsong 3
7
Modumo o kentswe tshebetsong 4
8
Modumo o kentsweng – Ho lelekisa Strobe
9
Modumo o kentsweng - Strobe kaofela
Mokhoa oa ho khantša 2
Chaser Chaser Chaser ,
Tlatsa Tlatsa Tlatsa,
Strobe lelekisa
Strobe tsohle
Tlhokomeliso: Sheba karolo ea 2.0 bakeng sa lintlha tse ling
1.2
Setšoantšo sa wiring le tlhaloso
2024 mc-kit.net
Leqephe la 2
www.homlicon.com
HomLiCon LCH3BT
Phepelo voltage 12VDC e hokahane le li-terminal blocks tse tšoailoeng + le -. Tsohle + LED Strip / Module li hokahane hammoho ho li-terminals tse tšoailoeng + L, le tsohle - LED Strip / Module, ka ho latellana ho li-terminals 1, 2, 3
Tlhokomeliso:
Lintho tse hlahisoang ha li na tšireletso ho seketsoana se khuts'oane kapa khatello e feteletseng. Khokahano e sa nepahalang e tla lebisa ho molaoli ea senyehileng.
1.3
Lisebelisoa li khutlela ho litlhophiso tsa feme
1. Tlosa motlakase HO TLOHA. 2. Tobetsa o hatelle konopo 3. Fetola matla ON. Kamora metsotsoana e 2-3 ha li-LED li bulela : 4. Lokolla konopo 'me u qale hape.
2024 mc-kit.net
Leqephe la 3
www.homlicon.com
HomLiCon LCH3BT
2.0
Light Show Control le Litlhophiso
2024 mc-kit.net
Leqephe la 4
www.homlicon.com
HomLiCon LCH3BT
2024 mc-kit.net
Leqephe la 5
www.homlicon.com
HomLiCon LCH3BT
2024 mc-kit.net
Leqephe la 6
www.homlicon.com
HomLiCon LCH3BT
Tlhokomeliso: Ha u fetohela ho Lighting mode 2, kanale e tala e bonesa metsotsoana e 2 ea pele.
Ka mokhoa ona o ka fokotsa khanya ea mocha o motala (hangata li-LED tse tala li khanya haholo). Tlhophiso ena e beha boemo bo phahameng ba mocha o motala mananeong ohle ntle le mokhoa oa Leseli 1.
Tlanya ha 'ngoe
Tafole e fetoha pakeng tsa mananeo
Lenaneo le latelang
Tšoara konopo ka tlase ho metsotsoana e 0.3
Penya habeli
Lenaneo le fetileng
Sehlopha sa mananeo a kentsoeng ka molumo / Sehlopha sa mananeo a ho latela khanya
Nako pakeng tsa ho tobetsa ha ho feta metsotsoana e 0.6 Tšoara konopo ka tlase ho metsotsoana e 0.3
2024 mc-kit.net
Leqephe la 7
Litokomane / Lisebelisoa
 |
HomLiCon LCH3BT 3 Channel LED PWM Controller [pdf] Buka ea Mong'a LCH3BT, LCH3BT 3 Channel LED PWM Controller, 3 Channel LED PWM Controller, LED PWM Controller, PWM Controller, Controller |