HomLiCon LC12R 12 Channel PWM LED Light Show Controller
Kopo
LC12R e etselitsoe ho laola lisebelisoa tse khanyang tse kang:
- Lipontšo tsa papatso
- Mabota a kganya
- Podium le stage mabone
- Litepisi tse khantšitsoeng
- Lipontšo tsa mabone a Keresemese
- Liphello tse ling tse khabisitsoeng kapa tse matla tsa khanya
- E ts'ehetsa lihlopha tse laolang tsa li-LED, li-strip tsa LED, kapa li-module tsa LED tse nang le liteishene tse sebetsang tse 6 ho isa ho tse 12.
Litlhaloso
- Palo ea likanale tse sebetsang: 6 - 12
- Phepelo voltage: 12 V DC (9 – 16 V DC) (ka ext. PSU)
- Boholo ba tlhahiso ea hajoale ka kanale: 2 A
- Boholo ba kakaretso ea hona joale: 24 A
- Palo ea maemo a PWM mocha ka mong: 110
- Molaoli oa phepelo ea hona joale (ha ho mojaro): 40 mA
- Mocheso oa tikoloho: 5 - 40 °C
- Litekanyo LC12R: 100 × 49 × 20 limilimithara
- Litekanyo tse ka thōko: 85 × 40 × 7 mm
Likarolo tse ka Sehloohong
Molaoli oa LC12R o etselitsoe ho laola matšoao a papatso. Palo ea likanale tse sebelisitsoeng e ka fetoloa ho tloha ho 6 ho isa ho 12.
Bakeng sa palo e 'ngoe le e' ngoe e ka khonehang ea liteishene tse sebetsang (ho tloha ho 6 ho isa ho 12) ho ka sebelisoa mananeo a 16, a arotsoe ka lihlopha tse peli:
- Mananeo a 8 a nang le phetoho e bobebe ea leseli (PWM)
- Mananeo a 8 a nang le liphetoho tse potlakileng tsa ON/OFF
E 'ngoe le e' ngoe ea mananeo a 16 e ka holofala, e lumella basebelisi ho khetha feela mananeo a lakatsehang.
15 ea mananeo a na le mekhahlelo e meraro:
- Ho tlatsa (lichane li butsoe ka tatellano e itseng)
- Tšoara (likanale li lula li BUTSE metsotsoana e 0 ho isa ho e 7)
- TIMA (likanale li tiisitsoe ka tatellano e itseng)
Litlhophiso tsohle li ka hlophisoa ho sebelisoa remote control ho tloha ho 8 metres hole, ho nolofatsa litokiso bakeng sa ho kenya mabone a maholo.
Litlhophiso tsa likhetho bakeng sa mananeo ohle:
- Palo ea likanale tse sebetsang: 6 - 12
- Backlight - boemo bo bobebe ba likanale tse tingoeng
- Monyako oa khanya oa kantle bakeng sa molaoli ON/OFF (ka phototransistor)
Litlhophiso tsa li-program tsa motho ka mong:
- Lebelo la ho fetola mocha: 0.04 - 1.2 metsotsoana
- Palo ea ho pheta-pheta lenaneong ka leng: 1 - 8
- Nako ea ho ts'oara (likanale li ntse li ON): 0 - 7 metsotsoana
Setšoantšo sa Wiring le Tlhaloso
Litaelo tsa Wiring
- Hokela phepelo ea motlakase ea 12 V DC ho litheminale tsa molaoli tse tšoailoeng “+” le “−”.
- Hokela terminal e 'ngoe le e 'ngoe e fosahetseng (−) ea li-strips kapa li-module tsa LED ho li-terminals tsa li-control tse ngotsoeng 1, 2, 3, ..., 12.
- Molaoli o fana ka lintlha tse tharo tse arohaneng tsa + LED:
- Likanale 1–4 li arolelana terminal e le 'ngoe + ea LED
- Likanale 5–8 li arolelana terminal e le 'ngoe + ea LED
- Likanale 9–12 li arolelana terminal e le 'ngoe + ea LED
Bakeng sa sehlopha ka seng, hokela li-terminals tse ntle (+) tsa li-strips kapa li-module tsa LED ho "terminal block" e tloaelehileng ea kantle (sehokelo sa likhoele tse kopanyang). Ho tloha sebakeng sena sa terminal, tsamaisa terata e le 'ngoe ho ea ho terminal + ea LED e tsamaisanang le molaoli.
ELA HLOKO: Li-terminals tsa + LED ho molaoli li tloaelehile ka hare ho + phepelo e kenang. Li fanoe feela e le lintlha tse bonolo tsa ho hokahanya bakeng sa ho hlophisa lihlopha tsa LED kapa li-module.
Ho hokela lithapo ho li-terminals tsa selemo:
- hlobola 8 - 10 mm ho tloha qetellong ea lithapo
- tobetsa 'me u tšoare konopo ea terminal ka screwdriver ebe o kenya terata e hlobotsoeng
Tlhokomeliso: Ntlha ea pele, kenya li-spacers mekoting e ntseng e phahama holim'a boto ho sireletsa lisebelisoa tse kentsoeng.
TLHOKOMELISO - KOTSI EA TŠENYO E SA FELENG
- Ha ho Ts'ireletso ea Output: Liphetho tsa molaoli ha li sirelelitsoe khahlano le li-circuits tse khutšoane, li-overload kapa polarity e ka morao. → Kamehla hlahloba lithapo tsohle habeli pele o bula.
- Lekola Mejalo Ohle Pele: Netefatsa hore lesela le leng le le leng la LED, mojule kapa lamp e sebetsa ka nepo pele e e hokela ho molaoli.
- Ho Hlokahala Moeli oa Hona Joale: Bakeng sa li-LED ka bomong kapa li-LED tse nang le matla a phahameng, sebelisa lihanyetsi tse nepahetseng tsa letoto ho fokotsa boleng ba hona joale ho boleng ba tsona bo ikhethileng. Li-strip tsa LED le li-modules hangata li na le lihanyetsi tse hahelletsoeng ka hare.
- Likhokahano tse Hanetsoeng: U se ke ua hokela li-LED tse matla haholo kapa li-COB tsa LED tse tsamaisoang ke mokhanni kapa inverter (boto e nyane ea elektroniki).
Litlhophiso li Fetileview
- Litlhophiso tsohle li etsoa ho sebelisoa remote control e fanoeng.
- Ho na le lihlopha tse supileng tse behang. Sehlopha se seholo se khetha palo ea likanale tse sebetsang; lihlopha tse ling li ka fetoloa feela ha ho hlokahala.
- Fumana sehlopha ka seng ka ho tobetsa le ho releasing likonopo tse peli nakong ea metsotsoana ea 2, ho thibela liphetoho tse sa lebelloang.
Beha Nomoro ea Likanale Tse Tsoang (MENU, 1)
- Tobetsa o lokolle MENU , ebe o tobetsa o lokolle 1 nakong ya metsotswana e 2 ho kenya mokgwa wa kgetho ya kanale. Ka mor'a tatelano ena, likanale tse sebetsang li bulela 'me mocha oa ho qetela o benya metsotsoana e meng le e meng e 0.5.
- Tobetsa + kapa – ho khetha palo ea likanale tse sebetsang (6 – 12). Lenaneo la ho qetela lea benya ho bontša nomoro e khethiloeng.
- Tobetsa
ho boloka le ho qala bocha, kapa 
ho qala bocha ntle le ho boloka.
Smooth Light Transition Programs (MENU, 2)
- Kenya Litlhophiso tsa Lenaneo la Smooth Transition
Tobetsa o lokolle MENU , ebe o tobetsa le ho lokolla 2 nakong ea metsotsoana e 2 ho fihlella sehlopha sa mananeo a 8 a nang le phetoho e khanyang ea khanya (PWM). Ka mor'a tatellano ena, lenaneo la pele le sebetsang sehlopheng sena le bontšoa (Lenaneo la 1 ka ho sa feleng). - Khetha Lenaneo
Tobetsa
ho fetohela lenaneong le latelang le sebetsang (ho fihlela ho 8 ka kamehla) kapa 
ho fetohela lenaneong le fetileng le sebetsang (Lenaneo la 1 ka ho sa feleng). Litlhophiso li sebetsa feela lenaneong la hajoale mme li ka fapana bakeng sa lenaneo le leng le le leng, ntle le boemo ba backlight, bo arolelanoang. - Thibela Mananeo
Tobetsa C ho tima lenaneo la hajoale le ho hlahisa e latelang e sebetsang (kapa e fetileng haeba ho se na lenaneo le latelang). Ha o khone ho kenya tšebetsong lenaneo le le leng le sa sebetseng - tobetsa TEST ho nolofalletsa sehlopha sohle sa mananeo a 8 (Lenaneo la 1 le bonts'itsoe). Haeba mananeo ohle a 8 sehlopheng sena a timiloe, likanale 2 le 4 li BULE. Sena se ka khoneha haeba bonyane lenaneo le le leng sehlopheng se seng le sebetsa. - Fetola Boemo ba Lebone la Backlight
Tobetsa 6 ho eketsa lebone la morao kapa 9 ho le fokotsa. Litlhophiso tsa mabone a morao-rao li sebetsa ho mananeo ohle a 16 'me li ama tsela eo liphetoho tse bonolo li lemohuoang ka eona mme li ka susumetsa lebelo le bonahalang. E khothalelitsoe: Fetola mabone a ka morao pele. Ka mor'a phetoho e 'ngoe le e' ngoe, lenaneo la hona joale le qala hape ho tloha qalong. - Fetola Lebelo la Lenaneo
Tobetsa + kapa - ho fetola lebelo la lenaneo la hajoale. - Fetola Palo ea Pheta-pheta
Tobetsa 4 kapa 7 ho seta pheta-pheto (1 - 8). Mecha ea 1 - 8 e sebelisoa bakeng sa pono. Tobetsa hang ho ea peleview (bona), tobetsa hape ho lokisa. Ka mor'a ho shebella, lenaneo la hona joale le qala hape ho tloha qalong. - Fetola Nako ea ho Tšoara
Tobetsa 5 kapa 8 ho seta nako ea ho ts'oara (metsotsoana e 0 - 7) eo ka eona likanale li lulang li BUTSE kamora mokhahlelo oa ho tlatsa. Mecha ea 1 - 8 e sebelisoa bakeng sa pono. Tobetsa hang ho ea peleview (bona), tobetsa hape ho lokisa. Ka mor'a ho shebella, lenaneo la hona joale le qala hape ho tloha qalong. - Boloka kapa Qala Botjha Ntle le ho Boloka
Tobetsa ho boloka le ho qala bocha, kapa ho qala bocha ntle le ho boloka.
Mananeo a Phetoho a kapele a ON/OFF (MENU, 3)
- Kenya Litlhophiso tsa Mananeo a Quick ON/OFF
Tobetsa o lokolle MENU , ebe o tobetsa o lokolle 3 nakong ea metsotsoana e 2 ho fihlella sehlopha sa mananeo a 8 a potlakileng a ON/OFF. Ka mor'a tatellano ena, lenaneo la pele le sebetsang sehlopheng sena le bontšoa (Lenaneo la 1 ka ho sa feleng). - Khetha Lenaneo
Tobetsa ho fetohela lenaneong le latelang le sebetsang (ho fihlela ho 8 ka kamehla) kapa ho fetohela lenaneong le fetileng le sebetsang (Lenaneo la 1 ka ho sa feleng). Litlhophiso li sebetsa feela lenaneong la hajoale mme li ka fapana bakeng sa lenaneo le leng le le leng, ntle le boemo ba backlight, bo arolelanoang. - Thibela Mananeo
Tobetsa C ho tima lenaneo la hajoale le ho hlahisa e latelang e sebetsang (kapa e fetileng haeba ho se na lenaneo le latelang). Ha o khone ho kenya tšebetsong lenaneo le le leng le sa sebetseng - tobetsa TEST ho nolofalletsa sehlopha sohle sa mananeo a 8 (Lenaneo la 1 le bonts'itsoe). Haeba mananeo ohle a 8 sehlopheng sena a timiloe, likanale 2 le 4 li BULE. Sena se ka khoneha haeba bonyane lenaneo le le leng sehlopheng se seng le sebetsa. - Fetola Boemo ba Lebone la Backlight
Tobetsa 6 ho eketsa lebone la morao kapa 9 ho le fokotsa. Litlhophiso tsa mabone a morao-rao li sebetsa ho mananeo ohle a 16 'me li ama tsela eo liphetoho tse bonolo li lemohuoang ka eona mme li ka susumetsa lebelo le bonahalang. E khothalelitsoe: Fetola mabone a ka morao pele. - Fetola Lebelo la Lenaneo
Tobetsa + kapa - ho fetola lebelo la lenaneo la hajoale. - Fetola Palo ea Pheta-pheta
Tobetsa 4 kapa 7 ho seta pheta-pheto (1 - 8). Mecha ea 1 - 8 e sebelisoa bakeng sa pono. Tobetsa hang ho ea peleview (bona), tobetsa hape ho lokisa. Ka mor'a ho shebella, lenaneo la hona joale le qala hape ho tloha qalong. - Fetola Nako ea ho Tšoara
Tobetsa 5 kapa 8 ho seta nako ea ho ts'oara (metsotsoana e 0 - 7) eo ka eona likanale li lulang li BUTSE kamora mokhahlelo oa ho tlatsa. Mecha ea 1 - 8 e sebelisoa bakeng sa pono. Tobetsa hang ho ea peleview (bona), tobetsa hape ho lokisa. Ka mor'a ho shebella, lenaneo la hona joale le qala hape ho tloha qalong. - Boloka kapa Qala Botjha Ntle le ho Boloka
Tobetsaho boloka le ho qala bocha, kapa ho qala bocha ntle le ho boloka.
Khetho ea Sehlopha sa ho Qala (MENU, 4) (Tlhahiso: mocha oa 4 ON)
- Kenya Litlhophiso
Tobetsa o lokolle MENU, ebe o tobetsa o lokolle 4 nakong ea metsotsoana e 2 ho fihlella sehlopha sena sa li-setting. Ka mor'a tatellano ena, mocha oa 4 o bulela. - Khetha Sehlopha sa ho Qala sa Mananeo
Khetha hore na ke sehlopha sefe sa mananeo se tla qala ka mor'a ho qala bocha:
Tobetsa ho seta sehlopha sa Smooth Light Transition Programme (PWM). (Tlhahiso: channel 1 ON)
Tobetsa ho seta sehlopha sa Mananeo a Phetoho a ON/OFF a Quick ON/OFF. (Tlhahiso: channel 2 ON) - Boloka kapa Qala Botjha Ntle le ho Boloka
Tobetsaho boloka le ho qala bocha, kapa ho qala bocha ntle le ho boloka.
Khetho ea Mokhoa (MENU, 5) (Tlhahiso: kanale 5 ON)
- Tobetsa o lokolle MENU , ebe o tobetsa o lokolle 5 nakong ea metsotsoana e 2 ho fihlella sehlopha sena sa li-setting. Ka mor'a tatellano ena, mocha oa 5 o bulela.
- Tobetsa TEST ho bulela likanale tsohle tse sebetsang. (Tlhahiso: channel 8 ON)
Tobetsa
ho kenya tshebetsong mokgwa wa Light Show. (Mananeo a tsamaisoa ho latela litlhophiso tsa hajoale) (Pontšo: kanale 8 OFF) - Tobetsa ho boloka le ho qala bocha, kapa ho qala bocha ntle le ho boloka.
Khutlisa ho Litlhophiso tsa Fektheri (MENU, 6) (Tlhahiso: kanale 6 ON)
- Tobetsa o lokolle MENU, ebe o tobetsa o lokolle 6 nakong ea metsotsoana e 2 ho fihlella sehlopha sena sa li-setting. Ka mor'a tatellano ena, mocha oa 6 o bulela.
- Tobetsa 0 ho khetha seta botjha. Pontšo e fetoha ho likanale 6 le 8 ON. Haeba reset e sa bolokoe nakong ea metsotsoana e 3, e tla hlakoloa.
- Tobetsa ho boloka le ho qala bocha, kapa ho qala bocha ntle le ho boloka.
HO ON/STANDBY Threshold Setting Thehiloeng ho Boemo ba Leseli (MENU, 7) (Tlhahiso: kanale 7 ON)
- Tobetsa o lokolle MENU, ebe o tobetsa o lokolle 7 nakong ea metsotsoana e 2 ho fihlella sehlopha sena sa li-setting. Ka mor'a tatellano ena, mocha oa 7 o bulela.
- Tobetsa + kapa - ho beha moeli oa boemo ba leseli (1 - 6) bakeng sa ho fetola molaoli pakeng tsa ON le STANDBY, ho itšetlehile ka leseli le fumanoeng ke phototransistor e behiloeng holim'a boto. Mananeo 1–6 a bontša moeli o khethiloeng:
- Mohato oa 1 - E BUA ka khanya e tlase (mantsiboea HO BONAHALA / hoseng haholo OFF)
- Mohato oa 5 - E BUA motšehare (mantsiboea ka ON / hoseng haholo OFF)
- Boemo ba 6 - Molaoli o lula o BUTSE (setting ea kamehla)
Hlokomela:
- Channel 8 e bontša hore na molaoli o ON kapa o TLOhile ho ea ka moeli o behiloeng le maemo a hona joale a khanya.
- Liphetoho boemong ba leseli kapa moeli li nka metsotsoana e 6 ho sebetsa, ka lebaka la kakaretso ea data e thibelang ts'ebetso ka leseli le lebisitsoeng ka phoso.
- Boemo ba kamehla: Boemo ba 6 - molaoli o lula o BUILE. (Tlhahiso: likanale 6, 7, 8 ON)
- Tobetsa ho boloka le ho qala bocha, kapa ho qala bocha ntle le ho boloka.
Leseli Pontšo
Ka mor'a hore motlakase o bulele, molaoli o tsamaisa mananeo ho ea ka litlhophiso tsa bona. Ntlha ea pele, mananeo a sebetsang a tsoang ho Smooth Light Transition Programme a tsamaisoa ka tatellano, a lateloa ke mananeo a sebetsang a tsoang ho sehlopha sa Quick ON / OFF Transition Program, ebe potoloho e pheta. (Sehlopha sa ho qala se ka fetoloa.)
Ho Light Show mode, litaelo tse latelang lia fumaneha:
- TEKO, - ho fetola pakeng tsa ON le STANDBY.
- TEKO, tlola sehlopha sa hajoale sa mananeo (PWM kapa ON/OFF) 'me u bontše lenaneo la pele le sebetsang ho tsoa sehlopheng se seng.
Letšoao la boemo ba LED
STATUS LED e bonts'a maqhubu a infrared a amohetseng le boemo ba hajoale ba mesebetsi e khethiloeng.
| Boemo LED | KHABANE TS'OANE |
| Ho benya | Li-pulse tsa infrared li amoheloa |
| E benya ka metsotsoana e 2 (ho tima/ho tima metsotsoana e meng le e meng e 0.1.) | Ho hatella MENU konopo |
| Ho benya ha molumo o mokhuts'oane (0.01s) le khefu e telele (1s) | Boemo ba STANDBY bo kentsoe ke phototransistor |
| ON | STANDBY mode e kentsoeng ke TEKO, tatellano ea bohlokoa |
Ka mor'a ho tobetsa MENU, STATUS LED e lula e sebetsa ka metsotsoana ea 2 (ON/OFF mong le e mong 0.1 s) ho bontša hore molaoli o emetse ho tobetsa konopo e latelang.
Taolo e hole
Mesebetsi ea konopo ea Remote Control
| Kenya Li-buttons tsa Litlhophiso | Fetola | Likonopo | Mosebetsi | Karolo | |
| MENU, | 1 | + | - | Beha Palo ea Likanale Tse Tsoang | 2.1 |
| Litlhophiso tsa Lenaneo: | 2.2 / 2.3 | ||||
| MENU, 2 |  |
Khetha Lenaneo | 2.2.2 / 3.2.2 | ||
| Mananeo a Phetoho ea Leseli a Boreleli | C TEKO | Deactivate program/ Kenya tshebetsong sehlopha se felletseng | 2.2.3 / 3.2.3 | ||
| 6 9 | Fetola khanya ea morao | 2.2.4 / 3.2.4 | |||
| MENU, 3Kapele ON/OFF | +- | Fetola lebelo | 2.2.5 / 3.2.5 | ||
| Mananeo a Phetoho | 4 7 | Fetola ho pheta-pheta | 2.2.6 / 3.2.6 | ||
| 5 8 | Fetola nako ea ho ts'oara | 2.2.7 / 3.2.7 | |||
| MENU, | 4 | |
Khetho ea Sehlopha sa ho Qala | 2.4.2 | |
| MENU, | 5 | TEKO |
Bulela dikanale tsohle tse sebetsang Light Show Mode | 2.5 | |
| MENU, | 6 | 0 | Seta li-setting tsa mosebelisi ho ea ho tse Defaults tsa Feme | 2.6 | |
| MENU, | 7 | + | - | HO ON/STANDBY Threshold Setting E Thehiloe ho Boemo ba Leseli | 2.7 |
| Litlhophiso TSOHLE | |
Boloka le ho qala bocha Qala hape ntle le ho boloka |
|||
Taolo e hole view:
Betri CR2025 (ha e kenyelelitsoe ka har'a khiti)
LBH
Ke lokela ho etsa'ng haeba li-LED li sa bonese ka mor'a ho kenya mohala?
Netefatsa likhokahano tse nepahetseng tsa likhoele 'me u netefatse hore li-LED lia sebetsa pele u li hokela ho molaoli.
A na nka hokela li-LED tsa matla a phahameng ka kotloloho ho molaoli?
Che, li-LED tse nang le matla a phahameng kapa li-COB tsa LED tse tsamaisoang ke mokhanni kapa inverter ha lia lokela ho hokahanngoa le molaoli.
Litokomane / Lisebelisoa
 |
HomLiCon LC12R 12 Channel PWM LED Light Show Controller [pdf] Bukana ea Mosebelisi LC12R 12 Channel PWM LED Light Show Controller, LC12R, 12 Channel PWM LED Light Show Controller, PWM LED Light Show Controller, Light Show Controller, Show Controller, Controller |