HomeSeer HS3-Pi Raspberry Pi ho Matha Tataiso ea ho Kena ea HS3

Tataiso ena e tla u lumella joalo ka mosebelisi ho sebelisa Raspberry Pi ea hau ho tsamaisa HS3. Ha e kentsoe ho Raspberry Pi3, HS3-Pi e theha selaoli sa heke sa lapeng sa Z-Wave se senyane haholo, se matla.

Litlhoko

• Raspberry Pi2, Pi3, kapa Pi3 B+
• Karete ea MicroSD e se nang letho ea 16GB* kapa ho feta
• Sebali sa karete ea SD

Lisebelisoa

• Setšoantšo sa HomeSeer Rasp-Pi (Ka botlalo 1.6GB)
• Etcher (setšoantšo se benyang)
• HS3 bakeng sa Pi3 Tar

Mokhoa o Felletseng oa Litšoantšo

(khetho ea 1):

1. Khoasolla hs3pi3_image_070319.zip sehokelong se kaholimo.
2. Hang ha download e felile, ntša hs3pi3_image_070319 foldareng ea zip. Sena se ka nka metsotso e ka bang 20.
3. Khoasolla, kenya, 'me u tsamaise Etcher.
4. Kenya karete ea SD e se nang letho ho sebali sa karete ea SD.
5. Khetha faele ea hs3pi3_image_070319 file le lengolo le nepahetseng la drive la karete ea hau ea SD. Tobetsa Flash. Ts'ebetso e ka nka metsotso e ka bang 20.
6. Hang ha flash e phethehile, tlosa karete ea hau ea SD ebe u e kenya ho Pi3 ea hau.
7. Ho qalisa ho tla nka nako e ka etsang motsotso. Eya ho find.homeseer.com ho qala ho sebedisa HS3! Tlhokomeliso: motso pw = homeseerpi.

Qala ka Potlako bakeng sa Litsebi tsa Linux

(khetho ea 2): 

1. Haeba u ka rata ho kenya ts'ebeliso ho boto ea hau ea Raspberry Pi, khoasolla tar e kaholimo file.
2. U tlameha ho kenya MONO ka botlalo ho Pi Board ea hau, kenya ka:
   • apt kenya mono-devel
   • apt kenya mono-complete
   • apt kenya mono-vbnc
3. O ka qala HS3 ka ho kenya ./ea ka har'a /usr/local/HomeSeer directory ho etsa liteko ebe o kenya mohala ho rc.local ho e qala ka bo eona ha sistimi ea hau e qala. E qale ka ho sebelisa mongolo /usr/local/HomeSeer/autostart_hs.
   1. login: homeseer | feta: hsthsth3
4. Kamora ho qala sistimi ea hau, e ea ho find.homeseer.com ho hokela sistimi ea hau kapa ho hokela ho IP ea hau ho port 80. (Haeba u se u ntse u e-na le seva e sebetsang ho port 80 (mohlomong Apache), hlophisa file /usr/local/HomeSeer/Config/settings.ini mme o fetole tlhophiso “gWebSvrPort" ho boema-kepe bofe kapa bofe boo u bo batlang. Qala hape HS3 kapa sistimi ea hau.)

Tobetsa mona bakeng sa Tataiso e felletseng ea HS3 Quick-Start.

Ho rarolla mathata ka Rasp-Pi

Bareki bohle ba na le ts'ehetso ea bophelo bohle. Qalong o na le Tšehetso ea Mohala ea Bohlokoa ba Matsatsi a 30 mme ka mor'a moo o na le tšehetso ka rona

Lefapha la Thuso (helpdesk.homeseer.com) le Boto ea Melaetsa e thehiloeng sechabeng (board.homeseer.com).

Bophahamo ba karete ea SD ea 16GB e kanna ea ba li-MB tse nyane ho feta boholo bo hlokahalang ka lebaka la bahlahisi. Bongata ba likarete tsa 16GB li tla sebetsa empa haeba u ka fumana taba ena, re khothaletsa karete ea SD ea 32GB.

Sehlahisoa sena se sebelisa kapa se sebelisa likarolo tse itseng le/kapa mekhoa ea tse latelang Patent tsa US: US Patent Nos.6,891,838, 6,914,893 le 7,103,511.

HomeSeer | 10 Commerce Park North, Unit #10 Bedford, NH 03110 | www.haetel.com | 603-471-2816 • rev 6. 9/9/2020

 

Litokomane / Lisebelisoa

HomeSeer HS3-Pi Raspberry Pi ho Matha HS3 [pdf] Tlhophiso Tataiso HS3-Pi, Raspberry Pi ho Run HS3

Litšupiso

• Bukana ea Mosebelisi