HOBO Adapter ea Keletso ea Pulse
Depot ea Lisebelisoa tsa Teko - 800.517.8431 - 99 Washington Street Melrose, MA 02176 - TestEquipmentDepot.com
Li-adapter tse kenang tsa pulse li sebelisetsoa ho kenya palo ea ho koaloa ha switch ka nako 'me li etselitsoe ho sebetsa le li-logger le liteishene tsa HOBO® tse lumellanang hantle tsa sensor. Adapter e na le sehokedi sa modula sa plug-in se e lumellang ho eketsoa habonolo ho lisebelisoa tsena. Ho na le mefuta e 'meli: ho koaloa ka mechini (S-UCD-M00x) ho sebelisoa ka mechini e lekanyang pula (bakeng sa example) le li-switch tsa mmuso tse tiileng (S-UCC-M00x) bakeng sa ts'ebeliso le li-sensors tse tsamaeang le pulse tse tsamaellanang.
Litlhaloso
| S-UCC-M00x Bakeng sa Liphetoho tsa Elektroniki | S-UCC-M00x Bakeng sa Liphetoho tsa Elektroniki | |
| Palo e kahodimodimo Keletso maqhubu | 120 Hz (li-pulses tse 120 ka motsotsoana) | 2 Hz (li-pulses tse 2 ka motsotsoana) |
| Tekanyo Range | Likhahla tse 0-65,533 ka karohano ea ho rema lifate | |
| Qeto | 1 pululo | |
| Nako ea Lockout | 45 µs ± 10% | 45 µs ± 10% |
| Mofuta oa Keletso o khothalletsoang | Ho koaloa ha switch switch ea switch ea elektroniki kapa boemo ba dijithale ba CMOS (mohlalaample: FET, opto-FET kapa 'mokelli ea bulehileng) | Ho koaloa ha mechini ea mechini (mohlalaampLe: switjha lehlaka ka gauge ya pula ya kgamelo) |
| Khetho ea Naha ea Phetoho * | Tlhahiso e tlase e sebetsang | Hangata e butsoe |
| Ho fumanoa ha moeli | Ho oela, Schmitt Trigger buffer (maemo a kelello: tlase -0.6 V, e phahameng ≥2.7 V) | |
| Bonyane ba pulse length bophara | 1 ms | |
| Input / Khumo Impedance | 100KΩ | |
| Bula Kakanyo ea Potoloho ea Voltage | 3.3 V | |
| Palo e kahodimodimo Keletso Voltage | 3.6 V | |
| Khokahano ea mosebelisi | Mehala ea 24 AWG, 2 e etella pele: e tšoeu (+), e ntšo (-) | |
| Sebaka sa Mocheso oa Ts'ebetso | -40° ho ea ho 75°C (-40° ho ea ho 167°F) | |
| Bolelele ba Cable ka kakaretso | 6.5 m (21.3 ft.) Kapa 1.57 m (5.1 ft.) | |
| Bolelele ba Cable Smart Sensor ** | 50 cm (1.6 ft.) | |
| Matlo | Matlo a leholimo a Xenoy a sirelletsang boemo ba leholimo a sireletsa lisebelisoa tsa elektronike tsa adaptara | |
| Litekanyo tsa Bolulo | 12.7 x 2.9 cm (5 x 1.13 in.) | |
| Boima ba 'mele | S-UCx-M001: 114 g (4 oz.); S-UCx-M006: 250 g (9 oz) | |
| Likotoana ka Sample | 16 | |
| Palo ea Likanale tsa Boitsebiso | 1 | |
| Tekanyo Karolelano ea Khetho | Che (e tlaleha palo ea li-pulses ka nako ea ho rema lifate) | |
 |
Letšoao la CE le supa sehlahisoa sena se latela litaelo tsohle tse amehang ho European Union (EU). |
* Bakeng sa bophelo bo phahameng ba betri, li-adapter tse kenang tsa pulse li lokela ho sebelisoa le mofuta oa li-switch tseo ba li ratang. Li-adapter li tla sebetsa ka lisebelisoa tse phahameng tse sebetsang (S-UCC) le li-switch tse koetsoeng hangata (S-UCD), empa bophelo ba betri bo ke ke ba ntlafatsoa.
** Seteishene se le seng sa HOBO se ka amohela liteishene tsa data tse 15 le ho fihla ho 100 m (328 ft) ea cable sensor smart (karolo ea likhokahano tsa dijithale tsa likhoele tsa kutlo).
Lihokelo tsa ho Kena
Sensa ea Pulse Input Adapter e na le likhokelo tse peli tsa ho kenya. Terata e tšoeu (+) e tsamaisoa ka 3.3 V ka khanyetso ea 100 K. Matla ana a fanoa ka betri ea logger. Mohala o motšo (-) o hokahantsoe ka adapta ho khokahano ea mobu oa logger. Thapo ea ho kenya e ka hokahanngoa ka kotlolloho ho li-terminals tsa sensara kapa ho li-cable tse nang le linate tsa terata tse kenyellelitsoeng.
Wiring bakeng sa S-UCD-M00x
Wiring bakeng sa S-UCC-M00x
Mabapi U Sebelisa Nuts terata
| Bohlokoat: Haeba u sebelisa linate tsa terata, etsa bonnete ba hore khokahano e sirelelitsoe ho maemo a leholimo. |
- Strip 1 cm (3/8 in.) Ea insulation ho tloha pheletsong ea likhoele, o hlokometse hore o se ke oa ts'ehetsa batsamaisi ba tšepe.
- Sotha lithapo tse hlobolotsoeng ka lehlakoreng le leng ebe o phunya nate ea terata ho ea ka nako.
- Lekola khokahano ka ho hula lithapo ka bonolo ho netefatsa khokahano e tiileng ea mochini. Kamehla fokotsa khatello ea khokahano ho etsa bonnete ba hore khokahano ha e robehe ka ho qhekelloa kapa ho sebetsoa khafetsa.
Ho hokela ho Logger kapa Seteishene
Ho hokela adaptara ho logger kapa seteisheneng, emisa logger kapa seteishene ho tloha ho rengoa ha lifate ebe o kenya jack ea modular ka har'a boema-kepe bo fumanehang ba bohlale seteisheneng. Sheba buka ea seteishene bakeng sa lintlha tse mabapi le liteishene tse sebetsang tse nang le li-sensor tse bohlale.
Ho phahamisa
Ho fana ka ts'ireletso ea nako e telele ho keneng ha mongobo, adapter ea sensor e bohlale e tlameha ho ts'oaroa ka holimo mme ka mehala ea thapo e tsamaisoa ka likhoketsane tsa marotholi e le hore metsi a tsoe hole le moo ho kenang thapo joalo ka ha ho bonts'itsoe ho example tlase. Ha e ts'oetsoe hantle, matlo a na le boemo ba leholimo (empa ha a na metsi).
Ho eketsa Bophelo ba Battery
Adapter e kenang ea pulse e sebelisa 1 µA ea hajoale ka tlatsetso e kholo (switjha e bulehile) mme e ka ba 33 µA ka tlatsetso e tlase (switjha e koetsoe). Bakeng sa bophelo bo boholo ba "logger", sebelisa adapter e kenang ea pulse e nang le li-switch tse bulehileng hangata kapa li-transducers tse seng li sa sebetse (potoloho e butsoe) bakeng sa 90% ea nako kapa ho feta.
Lisele tsa mokha oa boraro
Ha o hokahanya le sensor ea motho oa boraro, iphe nako ea ho netefatsa hore khokahano e ea tšepahala. Khokahano e lokela ho sirelletsoa pula, mobu, le ho pepesehela maemo a leholimo ka kotloloho. Lisebelisoa tsa mokha oa boraro tse rekiloeng ho Onset, joalo ka WattNode® kapa Veris pulse output kWh transducers, li fuoa litokomane tse fanang ka tlhaiso-leseling e eketsehileng bakeng sa phetolo ea sistimi.
Ho netefatsa tšebetso
Ho netefatsa ts'ebetso e nepahetseng ea adapta ea ho kenya pulse, hokela adaptara ho logger ebe o qala logger. Bakeng sa mofuta oa S-UCDM00x, kenya palo e tsejoang ea li-pulse (bakeng sa mohlample, haeba u sebelisa sekontiri sa pula se hulang metsi, tšela bakete makhetlo a 'maloa). Ebe u bala logger eo 'me u netefatse hore palo ea li-pulses tse fumanehang ho data file e nepahetse.
Haeba u nahana hore mofuta oa S-UCC-M00x kapa S-UCD-M00x ha o nke linaoa, lekola likhokelo ho adaptara mme u netefatse hore sesebelisoa se lekantsoeng se sebetsa ka mokhoa o tloaelehileng.
U sebelisa S-UCD-M00x Adapter (bakeng sa ho Koala Mabitso)
Karolo ena e hlalosa ho sebelisa S-UCD-M00x ho hokela seteishene ka ho koala mochini o kopaneng.
Tataiso
- Matlo a adaptara a lokela ho kenngoa kantle ho sebaka se koetsoeng seteisheneng. Etsa bonnete ba hore u latela litaelo tse kenyellelitsoeng seteisheneng ho etsa bonnete ba hore seteishene se koetsoe hantle moo thapo ea kutlo e tsoang setsing sa seteishene.
- Sireletsa matlo a adaptara ho palo kapa letsoho le ntseng le eketseha. Thapo e fetelletseng e lokela ho koaheloa le ho sirelletsoa ka maqhama a thapo
- Haeba likhoele tsa kutlo li setse fatše, sebelisa kotopo ho itšireletsa khahlanong le lintho tse kang liphoofolo, mechini ea mohloa le ho pepesehela lik'hemik'hale.
ExampLe: Ho theola pula ea bakete kapa ho koaloa ha mechini
S-UCD-M00x e etselitsoe ho sebetsa ka likhakanyo tsa pula tse hulang metsi le lisebelisoa tse ling tse nang le ho koaloa hangata ka mokhoa o bulehileng, o kopaneng, o kentse sephetho sa maqhubu a phahameng a 2 Hz. Senorara sena se na le nako ea ho notlela esale pele ea 327 ms mme e etselitsoe ho sebetsa ka lipontšo tse lokelang ho qhekelloa hore li lekanngoe ka nepo.
Seteishene se tloaelehileng sa ho hokela sensor le ho koaloa ka mochini se bonts'itsoeng ka tlase.
Tlosa
"Bounce" ke ntho e etsahalang moo pulse e le 'ngoe e ka bang le methapo e mengata ea bohata kapa bounces. Ho hlakola lets'oao ka tloaelo ho hlokahala ha ho metsoa matšoao ho li-switch tsa mochini, ho koaloa ha batho ba ikopantseng le li-switch tsa lehlaka.
Nako ea ho notlela e thibela lipompo tsa bohata tse bakiloeng ke bounce hore li se ke tsa nkuoa e le ho koaloa ha li-switch tse fapaneng. Haeba gauge ea hau e na le ponts'oa le betri, li hakolle ebe o hokela Pulse Input Adapter sebakeng sa tsona. Maemong a mangata, lithapo tse ntšo le tse tšoeu li ka hokahanngoa ka kotloloho le sehlahisoa se fetisoang. (Ha o hokela ho fetisa kapa ho chencha mabitso, polarity ha e na taba.)
U sebelisa S-UCC-M00x Adapter (bakeng sa li-switch tsa Elektroniki)
Karolo ena e hlalosa ho sebelisa S-UCC-M00x ho hokela H22-001 kapa U30 Station ho sesebelisoa se nang le switch ea elektroniki.
Example: FET Fetola Transducer
Adapter ea ho kenya pulse ea 120 Hz (S-UCC-M00x) e etselitsoe lisebelisoa tse nang le "switch" e tiileng e bulehileng, "switch" ea FET kapa mokelli ea bulehileng, e nang le makhetlo a 120 Hz. Adapter ena ea ho kenya e ke ke ea sebetsa le li-sensor tse nang le lisebelisoa tsa switch switch, lihlahisoa tsa AC, kapa lihlahisoa tse tlamehang ho hlahisoa (bona karolo e fetileng).
A Seteishene se tloaelehileng sa transducer switch ea FET se bontšoa ka tlase.
© 2010 Khamphani ea Onset Computer. Litokelo tsohle li sirelelitsoe. Onset le HOBO ke matshwao a kgwebo kapa matshwao a kgwebo a ngodisitsweng a Onset Computer Corporation. Likhoebo tse ling kaofela ke thepa ea lik'hamphani tse fapaneng.
Litokomane / Lisebelisoa
 |
HOBO Adapter ea Keletso ea Pulse [pdf] Litaelo HOBO, S-UCC-M001, S-UCC-M006, S-UCD-M001, S-UCD-M006, Adapter ea Keletso ea Pulse |
