Handson Technology DRV1017 2-Channel 4-Wire PWM Brushless Fan Speed ​​Controller

Selelekela

Ena ke setaolo sa lebelo la fan sa terata tse 'ne se ka laolang lebelo la libapali tse tsamaellanang le lintlha tsa Intel 4-wire fan. Taolo ena ea lebelo la fan ea 2 e feto-fetohang e na le sensor ea mocheso ho laola lebelo la fan ho latela mocheso o behiloeng esale pele. Ho bonolo ho bala lebelo la fan le mocheso o nang le pontšo ea likarolo tse 7 tsa LED.

SKU: DRV1017 

Lintlha tse Khutšoanyane

• Tshebetso Voltage Range: (8~60)Vdc.
• Nomoro ea Channel ea Taolo: 2.
• Mofuta oa Fan: 4 Wires Intel Specification e lumellana.
• Tekanyo ea Mocheso: NTC 10KΩ B = 3950.
• Pontšo: 3-Digits 7-Segment LED Display.
• Lebelo la Lebelo: 10 ~ 9990 RPM. Qeto ea 10RPM.
• Tekanyo ea Mocheso: (-9.9°C ~ 99.9°C) ±2°.
• Alamo ea Buzzer bakeng sa Tlhokomeliso ea ho Emisa Batšehetsi: <375RPM
• Tekanyetso ea Hona Joale ea Fan Board: 3A Max.
• Boima ba Boto: (65×65) limilimithara.

Sephutheloana Kenyelletsa

1. 1x Controller Module.
2. 2x 1 Mocheso oa mocheso.
3. 1x Buzzer.

Mechanical teba

Yuniti: mm

Setšoantšo se sebetsang

Pin Lebitso	Mosebetsi
PWM	Pulse-Width-Modulation Speed ​​Control Input
Lumela	Tachometric Speed ​​output Pontšo. 2 pululo/phetoho.
+12V	Phepelo ea motlakase
Fatše	Fatše

Tlhaloso ea Letšoao la 3-Digit le LED

Mojule ona o bonts'a boleng ba taolo ka ponts'o ea LED ea linomoro tse 3 tsa likarolo tse 7. Letšoao la li-LED tse 'ne ka lehlakoreng le letona la pontšo ea likarolo tse 7 tsa LED li bonts'a boleng ba hona joale ba mocheso le lebelo la libapali. Mola o ka holimo oa sesupo sa LEDs (FAN1) e emela mocheso ho C le lebelo (x10rpm) la fene ho mocha oa 1. Mola o ka tlaase oa letšoao la LEDs (FAN2) e emela mocheso ho C le lebelo (x10rpm) la fene mocha oa 2. Boemong bo tloaelehileng ba ho sebetsa, lebelo la fan le litekanyetso tsa mocheso li tla hlahisoa ka tatellano. U ka fetola boleng ka letsoho le ka potlako ka nako efe kapa efe ka ho tobetsa likonopo tsa "+" le "-". Pontšo ea kanale ea 2 e ka koaloa ha ho hlokahala.

Litaelo tsa ho seta

1. Basic Constant Speed ​​Mode:
   Mabelo a motheo a lebelo a sebelisoa ho lokisa lebelo la fene pele taolo ea mocheso e qala, ke hore, lebelo le sa khaotseng la fan ha mocheso o le tlase ho feta mocheso o potlakisang. Mokhoa oa ho beha ke ho tobetsa konopo ea "OK" maemong afe kapa afe a sebetsang. Letšoao le holimo la 2 LEDs le tla khantša kaofela, pontšo ea likarolo tse 7 e tla bontša 10 ~ 100. Fetola lebelo la fan ka konopo ea +/- ho seta lebelo la fan. Tobetsa konopo nako e telele ho fetola kapele le ka mokhoa o tsoelang pele. Tobetsa konopo ea "OK" ho kenya litlhophiso tsa lebelo la setsi sa 2, sebelisa mokhoa o ts'oanang ho beha boleng ebe o tobetsa konopo ea "OK" hape ho boloka le ho tsoa. Fan e tla matha ka lebelo lena le behiloeng pele e kenya mokhoa oa ho laola "acceleration speed".
2. Acceleration Temperature Control Mode:
   1. Boemong bo tloaelehileng ba ts'ebetso, tobetsa 'me u tšoare konopo ea "OK" ho fihlela e hlahisa L** (** ke palo ea linomoro), ebe u lokolla konopo. Letšoao la li-LED tse peli moleng o ka holimo oa "FAN1" kaofela li tla khantša ho emela boemo ba hona joale ba mocheso o potlakileng oa FAN1.
   2. Fetola boleng bona ka likonopo tsa "+" le "-" (range 5-94, unit Celsius) bakeng sa ho beha mocheso o tlase ebe o tobetsa konopo ea OK.
   3. Latela konopo ea OK mohatong oa 2, e tla kenya tlhophiso ea mocheso o felletseng oa FAN1, e tla hlahisoa e le "H **". Fetola mocheso bakeng sa lebelo le felletseng la FAN ebe o tobetsa konopo ea OK.
   4. Tobetsa konopo ea "OK" ho kenya tlhophiso ea alamo ea kanale-1. Sebelisa konopo ea “+' le “-“ ho kenya alamo ea buzzer. Alamo ea Buzzer e tla lla haeba lebelo la fan le ka tlase ho 375RPM. "boF" (Buzzer Off) > e bolela ho tima alamo bakeng sa mocha ona, "bon" (Buzzer On)> e bolela ho nolofalletsa alamo ea buzzer ea mocha ona. Netefatsa tlhophiso ka ho tobetsa konopo ea "OK" ho kenya litlhophiso tsa kanale-2. Latela tatellano ho Channel-1 ho beha paramente bakeng sa Channel-2. Ha litlhophiso tse ka holimo li phethiloe, tobetsa konopo ea "OK" ho tsoa le ho boloka li-parameter.
   5. Koala Sebono sa Channel-2:
      1. Matla Off mojulung oa taolo.
      2. Tsoela pele ho tobetsa konopo ea "OK" le matla ho module ea taolo ebe o lokolla konopo.
      3. Pontšo e tla bontša "2on" (channel-1 le channel-2 e nolofalletsa) kapa "2oF" (Channel-1 e nolofalletsa, Channel-2 disable).
      4. Sebelisa konopo ea "+" kapa "-" ho fetola khetho ebe o tobetsa konopo ea "OK" ho boloka litlhophiso le ho tsoa.
      5. Mookameli o tla kena boemong bo tloaelehileng ba ho sebetsa.

Handsontec.com
Re na le likarolo tsa maikutlo a hau

HandsOn Technology e fana ka sethala sa multimedia le se sebetsanang le batho bohle ba ratang lisebelisoa tsa elektroniki. Ho tloha qalong ho isa ho diehard, ho tloha ho moithuti ho isa ho morupelli. Boitsebiso, thuto, khothatso le boithabiso. Analog le dijithale, tse sebetsang le tsa theory; software le hardware. 

HandsOn Technology e tšehetsa Sethala sa Nts'etsopele sa Open Source Hardware (OSHW).

Ithute : Moralo : Arolelana 

www.handsontec.com

Sefahleho se ka morao ho boleng ba sehlahisoa sa rona… 

Lefatšeng la phetoho e sa khaotseng le tsoelo-pele e tsoelang pele ea theknoloji, sehlahisoa se secha kapa se nkeloang sebaka ha se hole - 'me kaofela ha tsona li hloka ho hlahlojoa. Barekisi ba bangata ba kenya le ho rekisa ntle le licheke 'me sena e ke ke ea e-ba lithahasello tsa mang kapa mang, haholo-holo moreki. Karolo e 'ngoe le e' ngoe e rekisoang ho Handsotec e lekoa ka botlalo. Kahoo ha u reka ho tsoa ho lihlahisoa tsa Handsontec, u ka ba le ts'epo ea hore u fumana boleng le boleng bo ikhethang. 

Re ntse re eketsa likarolo tse ncha e le hore u ka tsoela pele mosebetsing oa hau o latelang. 

• Breakout Boards & Modules
  
• Lihokelo
  
• Likarolo tsa Electro-Mechanical
  
• Boitsebiso ba Boenjiniere
  
• Mechanical Hardware
  
• Likaroloana tsa Elektronike
  
• Phepelo ea motlakase
  
• Arduino Board & Shield
  
• Lisebelisoa & Lisebelisoa
  

Tšehetso ea Bareki

www.handsontec.com

Litokomane / Lisebelisoa

Handson Technology DRV1017 2-Channel 4-Wire PWM Brushless Fan Speed ​​Controller [pdf] Buka ea Taelo DRV1017, DRV1017 2-Channel 4-Wire PWM Brushless Fan Speed ​​Controller, 2-Channel 4-Wire PWM Brushless Fan Speed ​​Controller, 4-Wire PWM Brushless Fan Controller, PWM Brushless Fan Speed ​​Controller, Brushless Fan Speed ​​Controller, , Selaoli sa Lebelo, Selaoli

Litšupiso

• Bukana ea Mosebelisi