Litaba pata
1 GLEDOPTO GL-C-001P 5-in-1 Smart LED Controller Maxinstruction
2 NETEPO PARING
3 RETS'ELISITSOE
4 FACTORY RESET:
5 LETŠOANTŠO LEOOETSOANG
6 MATLA ON STATUS & FREQUENCY SETTINGS
7 MOSEBETSI OA TŠEBELETSO EA TŠEBELETSO KA 2.4G RF REMOTE LAOLI
8 Litokomane / Lisebelisoa
8.1 Litšupiso
9 Related Posts

GLEDOPTO-logo

GLEDOPTO GL-C-001P 5-in-1 Smart LED Controller MaxGLEDOPTO-GL-C-001P-5-in-1-Smart-LED-Controller-Max-producttaelo

  1. Letšoao la LED
    Lipontšo tse fapaneng tsa mebala li lumellana le mesebetsi e fapaneng.
  2. Seta bocha
    Tobetsa nakoana hang ho fetola maqhubu; Tobetsa nakoana habeli ho kenya fumana le ho tlama; Tobetsa nakoana ka makhetlo a mararo ho kenya touchlink; Tobetsa nakoana ka makhetlo a mane ho hlakola marang-rang a zigbee.
  3. KHETHA
    Tobetsa hanngoe hang ho chencha tšebetso; Tobetsa o hatelle ho feta metsotswana e 5 ho seta boemo ba ho bulela.
Lebitso la Sehlahiswa 5 ho 1 Smart LED Controller Max
Mohlala NO. GL-C-001P
Boholo 125x37x24mm
Keletso Voltage DC12-24-36-48-54 V
Sekhahla sa Tšireletso IP20
Kakaretso ea Matla 270 W Max
Kakaretso ea Sephetho sa Hona Joale 5 A Max
Mocheso oa ho sebetsa -20 ℃ ~ 45 ℃
Anode e Tloaelehileng
Kamehla Voltage

 

MESEBETSI EA MEBALA E FAPANENG E BONTŠANG JOALOKA LETHABO LE LATELANG:(RGBCCT >RGBW >RGB >CCT >DIMMER >RGBCCT)GLEDOPTO-GL-C-001P-5-in-1-Smart-LED-Controller-Max-2

NETEPO PARING

  1. Ho kopanya le Zigbee Hub
    Kenya sesebelisoa ho netweke ea zigbee ka mohokahanyi kapa hub
    • Ka kopo etsa bonnete ba hore sesebelisoa ha sea penta.
      Ho seng joalo, ka kopo "RESET" sesebelisoa ho latela karolo ea Ⅱ "RESET".
    • Ka mor'a MOHATO oa 1, ho tla ba le ts'ebetso ea ho kopanya e ka bang 90s
      Hang ha nako e felile, o hloka ho pheta-pheta
    • Bula zigbee App
      (hue kapa Amazon Alexa), eketsa sesebelisoa.
    • Haeba pairing e entsoe ka katleho ka mor'a mehato e ka holimo, sesebelisoa se tla benya ka makhetlo a 3.GLEDOPTO-GL-C-001P-5-in-1-Smart-LED-Controller-Max-3
  2. TouchLink ho Zigbee Remote Control / Touch Panel
    •  Ka kopo etsa bonnete ba hore sebaka se pakeng tsa sesebelisoa le remote control / touch panel se ka tlase ho 10cm;GLEDOPTO-GL-C-001P-5-in-1-Smart-LED-Controller-Max-4
    • Mokhoa oa 1: Ka kopo, tobetsa konopo e khuts'oane "Reset" makhetlo a 3 kapa u bulele / tima sesebelisoa makhetlo a 3 ho kena "Touchlink Commissioning" mode, sesebelisoa se tla benya makhetlo a 5.
      Seta bochaGLEDOPTO-GL-C-001P-5-in-1-Smart-LED-Controller-Max-5
      Mokhoa oa 2: Matlafatsa sesebelisoa hape, Touchlink Commissioning e tla qala kamora metsotsoana e 15 haeba e sa eketsoa ho netweke ea ZigBee, metsotsoana e 165 e felile. Kapa qala hang-hang haeba e se e kentsoe marang-rang, metsotsoana e 180 e felile. Hang ha nako e felile, pheta ts'ebetso hape.
    • Beha sebaka se hole / se amang ho kenya "Touchlink Commissioning". Ka kopo sheba bukana ea "remote/ touch panel" e tsamaellanang le eona.

Ho tla ba le sesupo ho phanele e hole kapa ea ho ama bakeng sa pairing e atlehileng, sesebelisoa se tla benya makhetlo a 2. Joale sesebelisoa se tla khona ho laoleha ka "remote/ touch panel".GLEDOPTO-GL-C-001P-5-in-1-Smart-LED-Controller-Max-6Hlokomela:

  1. Haeba sesebelisoa le taolo e hole ho marang-rang a fapaneng a Zigbee, remote ka 'ngoe e ka hokela sesebelisoa se le seng.
  2. Haeba sesebelisoa le taolo ea remoutu ho netweke e tšoanang ea Zigbee, boholo ba li-remoutu tse 30 bo ka hokela sesebelisoa se le seng.
  3. Bakeng sa Philips Hue / Amazon Echo Plus, sesebelisoa le taolo e hole e lokela ho ba marang-rang a tšoanang pele ho TouchLink.

 

 Fumana le ho Tlama Mokhoa
*Hlokomela: Netefatsa hore sesebelisoa le remoutu li ho netweke e le 'ngoe.

  • Tobetsa nakoana konopo ea "Reset" (kapa kenya matla sesebelisoa hape) ka makhetlo a 2. Sesebelisoa se tla benya habeli, 'me se qale mokhoa oa "Fumana le ho Tlama" ho fumana "Target Node".
  • Beha sebaka sa "remote control" / touch panel (node ​​ea sepheo) ho kenya "Find and Bind" mode ho batla "Bind Initiator". Ka kopo sheba bukana ea "remote/ touch panel" e tsamaellanang le eona.
  • Fumana le ho Tlama" e phethiloe, karolo e hole / touch e tla ba le sesupo. Hona joale sesebelisoa se tla laoloa ke remote control/touch panel.GLEDOPTO-GL-C-001P-5-in-1-Smart-LED-Controller-Max-7

E tsamaisana le 2.4GHz RF Remote Control / Touch Panel

  1. The pairing e tla ba nako ka mor'a metsotsoana e 4 ha sesebelisoa se buletsoe.
  2. Ho kopanya ho tla etsoa ka katleho ka ho tobetsa konopo efe kapa efe ea "On" ea 2.4G RF Remote kapa touch panel.
  3. Lipontšo tse tsoang sesebelisoa li tla benya ka makhetlo a 3.GLEDOPTO-GL-C-001P-5-in-1-Smart-LED-Controller-Max-8

RETS'ELISITSOE

RESETSA Nete ea Zigbee hape

  1. Mokhoa oa 1: Hlakola sesebelisoa ho APP, sesebelisoa se tla benya makhetlo a 3.
  2. Mokhoa oa 2: Konopo e khuts'oane ea "Reset" makhetlo a 4 (Kapa kenya matla hape sesebelisoa makhetlo a 4) ho hlakola marang-rang, sesebelisoa se tla benya makhetlo a 3.GLEDOPTO-GL-C-001P-5-in-1-Smart-LED-Controller-Max-9

RESETSA 2.4GHz RF Network hape
Mokhoa oa 1: Tobetsa konopo ea Master "On" ka makhetlo a 5 nakong ea metsotsoana e 4 ka mor'a hore sesebelisoa se sebetse, sesebelisoa se tla benya makhetlo a 3.
Mokhoa oa 2: Tobetsa ka nako e khuts'oane ka makhetlo a 5 ka konopo ea Zone "On" sesebelisoa se kopantsoeng nakong ea metsotsoana ea 4 ka mor'a hore sesebelisoa se sebelisoe, sesebelisoa se tla benya ka makhetlo a 3.GLEDOPTO-GL-C-001P-5-in-1-Smart-LED-Controller-Max-10

FACTORY RESET:

Factory Reset e tla etsoa ka katleho ka ho tobetsa konopo ea "Reset" nako e telele ho feta metsotsoana ea 5 (kapa ho tsosolosa sesebelisoa ka makhetlo a 5 kapa ho feta). Litlhophiso tsohle tsa tlhophiso li tla tsosolosoa ka mor'a hore sesebelisoa se tsosolosoe kapa se tlosoe marang-rang, ho akarelletsa le ZigBee le 2.4G RF Network. Letšoao le tla bonesa pele makhetlo a 3 ka 'mala oa ts'ebetso e ts'oanang e khethiloeng,' me e fetohe 'mala o mosoeu oa kamehla (Default RGBCCT function) kamora ho benya makhetlo a 4 hape.GLEDOPTO-GL-C-001P-5-in-1-Smart-LED-Controller-Max-11

LETŠOANTŠO LEOOETSOANG

RGBCCT: Tlas'a ts'ebetso ea RGBCCT, mohala oa RGBCCT o ka hokahanngoa le sesebelisoa.GLEDOPTO-GL-C-001P-5-in-1-Smart-LED-Controller-Max-12

RGBW: Tlas'a ts'ebetso ea RGBW, mohala oa RGBW o ka hokahanngoa, ntle le khokahano ea "N" terminal.GLEDOPTO-GL-C-001P-5-in-1-Smart-LED-Controller-Max-13

RGB: Tlas'a ts'ebetso ea RGB, mohala oa RGB o ka hokahana, ntle le khokahano ea "N" terminal.GLEDOPTO-GL-C-001P-5-in-1-Smart-LED-Controller-Max-13

CCT: Tlas'a ts'ebetso ea CCT, likotoana tse peli tsa CCT li ka kopanngoa, ntle le ho hokahanya le "N" terminal.GLEDOPTO-GL-C-001P-5-in-1-Smart-LED-Controller-Max-13

DIMMER: Tlas'a ts'ebetso ea dimmer, likarolo tse hlano tsa mebala e le 'ngoe li ka kopanngoa.GLEDOPTO-GL-C-001P-5-in-1-Smart-LED-Controller-Max-13

MATLA ON STATUS & FREQUENCY SETTINGS

Litlhophiso tsa Boemo ba Matla a ho sebetsa
Tobetsa nako e telele konopo ea "opt" bakeng sa metsotsoana e fetang 5, letšoao le tla benya ka 'mala o moputsoa o khanyang' me le qalelle 'mala o fetileng ka mor'a "ho tima" bakeng sa metsotsoana ea 4 ho qeta boemo ba matla a ho sebetsa. Boemo ba kamehla ba ho kenya matla bo bobebe. Letšoao le benyang ka makhetlo a 3 ka boputsoa bo bobebe bo bolela leseli le le tlas'a matla a ho sebetsa, ho benya ka makhetlo a 4 ka boputsoa bo bobebe ho bolela ho tima ka tlas'a boemo ba matla.

Litlhophiso tsa khafetsa
E le hore e sebetse ho lisebelisoa tse fapaneng tsa matla, maqhubu a sesebelisoa a ka khethoa e le 600Hz, 800Hz, 1000Hz, 2000Hz, 4000Hz, 8000Hz le maqhubu a kamehla 1000HZ. Hang ha o tobetsa konopo ea "Reset", frequency e tla fetohela ho e latelang. Letšoao le tla benya ka 'mala o mopinki' me le qalelle ho 'mala o fetileng ka mor'a ho "tima" bakeng sa metsotsoana e 2. Molao oa linako tse benyang bakeng sa maqhubu a fapaneng ka kopo sheba tafole.GLEDOPTO-GL-C-001P-5-in-1-Smart-LED-Controller-Max-17

MOSEBETSI OA TŠEBELETSO EA TŠEBELETSO KA 2.4G RF REMOTE LAOLIGLEDOPTO-GL-C-001P-5-in-1-Smart-LED-Controller-Max-18

Litokomane / Lisebelisoa

GLEDOPTO GL-C-001P 5-in-1 Smart LED Controller Max [pdf] Litaelo
GL-C-001P, 5-in-1 Smart LED Controller Max, GL-C-001P 5-in-1 Smart LED Controller Max

Litšupiso

Related Posts

Tlohela maikutlo

Aterese ea hau ea lengolo-tsoibila e ke ke ea phatlalatsoa. Libaka tse hlokahalang li tšoailoe *