Sesebelisoa sa Giga GD32E231C-START Arm Cortex-M23 32-bit MCU Controller
Kakaretso
GD32E231C-START e sebelisa GD32E231C8T6 joalo ka molaoli ea ka sehloohong. E sebelisa Mini USB interface ho fana ka matla a 5V. Reset, Boot, Wakeup key, LED, GD-Link, Ardunio le tsona li kenyelelitsoe. Bakeng sa lintlha tse ling ka kopo, sheba ho GD32E231C-START-V1.0 schematic.
Mosebetsi oa phini
Lethathamo la 2-1 Mosebetsi oa phini ea mosebetsi
| Mosebetsi | Pin | Tlhaloso |
|
LED |
PA7 | LED1 |
| PA8 | LED2 | |
| PA11 | LED3 | |
| PA12 | LED4 | |
| RETS'ELISITSOE | K1-Seta bocha | |
| SEHLOOHO | PA0 | K2-Tsoha |
Rea qala
Boto ea EVAL e sebelisa sehokelo sa Mini USB ho fumana matla a DC + 5V, e leng sistimi e tloaelehileng ea ho sebetsa ea hardwaretage. GD-Link e ea hlokahala bakeng sa ho khoasolla le ho lokisa mananeo. Khetha mokhoa o nepahetseng oa ho qalisa ebe o kenya matla, LEDPWR e tla bulela, e bontšang hore motlakase o lokile. Ho na le mofuta oa Keil le mofuta oa IAR oa merero eohle. Keil mofuta oa merero e thehiloe ho latela Keil MDK-ARM 5.25 uVision5. Mofuta oa IAR oa merero o entsoe ho ipapisitsoe le IAR Embedded Workbench bakeng sa ARM 8.31.1. Nakong ea tšebeliso, lintlha tse latelang li lokela ho tsotelloa:
- Haeba u sebelisa Keil uVision5 ho bula morero. E le hore u rarolle bothata ba "Sesebelisoa se Hlokehileng (s)", u ka kenya GigaDevice.GD32E23x_DFP.1.0.0.pack.
- Haeba u sebelisa IAR ho bula morero, kenya IAR_GD32E23x_ADDON_1.0.0.exe ho kenya tse amanang le tsona. files.
Sebopeho sa Hardware se felileview
Phepelo ea motlakase
Setšoantšo sa 4-1 Setšoantšo sa moralo oa phepelo ea motlakase
Khetho ea ho qala
LED
SEHLOOHO
Sehokelo sa GD
MCU
Ardunio
Tataiso ea tšebeliso e tloaelehileng
GPIO_Running_LED
Morero oa DEMO
Pontšo ena e kenyelletsa mesebetsi e latelang ea GD32 MCU:
- Ithute ho sebelisa GPIO ho laola LED
- Ithute ho sebelisa SysTick ho hlahisa tieho ea 1ms
GD32E231C-START board e na le li-LED tse 'nè. Li-LED1 li laoloa ke GPIO. Demo ena e tla bontša mokhoa oa ho khantša LED.
DEMO sephetho se sebetsang
Khoasolla lenaneo < 01_GPIO_Running_LED > ho boto ea EVAL, LED1 e tla bulela le ho tima ka tatellano le karohano ea 1000ms, e phete mokhoa oo. GPIO_Key_Polling_mode
Morero oa DEMO
Pontšo ena e kenyelletsa mesebetsi e latelang ea GD32 MCU:
- Ithute ho sebelisa GPIO ho laola LED le Senotlolo
- Ithute ho sebelisa SysTick ho hlahisa tieho ea 1ms
GD32E231C-START board e na le linotlolo tse peli le LED tse 'nè. Linotlolo tse peli ke konopo ea Reset le konopo ea Wakeup. Li-LED1 li laoloa ke GPIO. Demo ena e tla bontša mokhoa oa ho sebelisa senotlolo sa Wakeup ho laola LED1. Ha o tobetsa konopo ea Wakeup, e tla hlahloba boleng ba ho kenya boema-kepe ba IO. Haeba boleng ke 1 mme e tla emela 50ms. Sheba boleng ba ho kenya boema-kepe ba IO hape. Haeba boleng bo ntse bo le 1, ho bontša hore konopo e tobetse ka katleho le ho fetola LED1.
DEMO sephetho se sebetsang
Khoasolla lenaneo < 02_GPIO_Key_Polling_mode > ho boto ea EVAL, li-LED kaofela li bonesitsoe hanngoe bakeng sa teko 'me LED1 e butse, tobetsa konopo ea Wakeup, LED1 e tla tima. Tobetsa konopo ea Wakeup hape, LED1 e tla buloa.
EXTI_Key_Interrupt_mode
Morero oa DEMO
Pontšo ena e kenyelletsa mesebetsi e latelang ea GD32 MCU:
- Ithute ho sebelisa GPIO ho laola LED le KEY
- Ithute ho sebelisa EXTI ho hlahisa tšitiso ea kantle
GD32E231C-START board e na le linotlolo tse peli le LED tse 'nè. Linotlolo tse peli ke konopo ea Reset le konopo ea Wakeup. Li-LED1 li laoloa ke GPIO. Demo ena e tla bontša mokhoa oa ho sebelisa mohala oa EXTI oa ho sitisa ho laola LED1.Ha o tobetsa konopo ea Wakeup, e tla hlahisa tšitiso. Mosebetsing o sitisang litšebeletso, demo e tla fetola LED1.
DEMO sephetho se sebetsang
Khoasolla lenaneo < 03_EXTI_Key_Interrupt_mode > ho boto ea EVAL, li-LED kaofela li bonesitsoe hanngoe bakeng sa teko 'me LED1 e butse, tobetsa konopo ea Wakeup, LED1 e tla tima. Tobetsa konopo ea Wakeup hape, LED1 e tla buloa.
TIMER_Key_EXTI
Pontšo ena e kenyelletsa mesebetsi e latelang ea GD32 MCU:
- Ithute ho sebelisa GPIO ho laola LED le KEY
- Ithute ho sebelisa EXTI ho hlahisa tšitiso ea kantle
- Ithute ho sebelisa TIMER ho hlahisa PWM
GD32E231C-START board e na le linotlolo tse peli le LED tse 'nè. Linotlolo tse peli ke konopo ea Reset le konopo ea Wakeup. Li-LED1 li laoloa ke GPIO. Demo ena e tla bonts'a mokhoa oa ho sebelisa TIMER PWM ho etsa hore EXTI e sitise ho fetola boemo ba LED1 le EXTI e sitisang mohala ho laola LED1. Ha o tobetsa konopo ea Wakeup, e tla hlahisa tšitiso. Mosebetsing o sitisang litšebeletso, demo e tla fetola LED1.
DEMO sephetho se sebetsang
Khoasolla lenaneo < 04_TIMER_Key_EXTI > ho boto ea EVAL, li-LED kaofela li bonesitsoe hanngoe bakeng sa teko, tobetsa konopo ea Wakeup, LED1 e tla laetsoa. Tobetsa konopo ea Wakeup hape, LED1 e tla tima. Hokela PA6(TIMER2_CH0) le PA5
Nalane ea ntlafatso
| Phetolelo No. | Tlhaloso | Letsatsi |
| 1.0 | Phatlalatso ea Pele | Hlakola.19, 2019 |
| 1.1 | Fetola sehlooho sa tokomane le leqephe la lapeng | La 31 Tšitoe 2021 |
Tsebiso ea Bohlokoa
Tokomane ena ke thepa ea GigaDevice Semiconductor Inc. le lithuso tsa eona ("Company"). Tokomane ena, ho kenyeletsoa sehlahisoa sefe kapa sefe sa Khampani se hlalositsoeng tokomaneng ena (“Sehlahisoa”), ke sa Khampani tlas'a melao ea thepa ea mahlale le litumellano tsa People's Republic of China le libaka tse ling lefatšeng ka bophara. Khampani e na le litokelo tsohle tlas'a melao le litumellano tse joalo 'me ha e fane ka laesense efe kapa efe tlas'a litokelo tsa eona tsa molao, litokelo tsa molao, matšoao a khoebo, kapa litokelo tse ling tsa thepa ea mahlale. Mabitso le mabitso a batho ba bang ba boletsoeng moo (haeba a le teng) ke thepa ea mong'a bona 'me a lebisitsoe ho sepheo sa boitsebahatso feela. Khampani ha e fane ka tiisetso ea mofuta ofe kapa ofe, ho hlalosa kapa ho fana ka maikutlo, mabapi le tokomane ena kapa Sehlahisoa sefe kapa sefe, ho kenyeletsoa, empa ho sa felle feela, litiisetso tse boletsoeng tsa thekiso le ho sebetsa molemong o itseng. Khampani ha e nke boikarabelo bofe kapa bofe ka lebaka la kopo kapa tšebeliso ea Sehlahisoa sefe kapa sefe se hlalositsoeng tokomaneng ena. Tlhahisoleseding efe kapa efe e fanoeng tokomaneng ena e fanoe feela ka mabaka a litšupiso. Ke boikarabello ba mosebelisi oa tokomane ena ho rala hantle, ho hlophisa, le ho leka ts'ebetso le polokeho ea ts'ebeliso efe kapa efe e entsoeng ka tlhahisoleseling ena le sehlahisoa sefe kapa sefe se hlahisoang. Ntle le lihlahisoa tse ikhethileng tse boletsoeng ka ho hlaka tumellanong e amehang, Lihlahisoa li entsoe, li ntlafatsoa, le/kapa li etselitsoe likhoebo tse tloaelehileng, tsa indasteri, tsa botho, le/kapa tsa lelapa feela. Lihlahisoa ha lia etsoa, tsa rereloa, kapa ha lia lumelloa ho sebelisoa e le likarolo tsa lisebelisoa tse etselitsoeng kapa tse reretsoeng ts'ebetso ea libetsa, lisebelisoa tsa libetsa, lisebelisoa tsa nyutlelie, lisebelisoa tsa taolo ea matla a athomo, lisebelisuoa tsa taolo ea ho chesa, lifofane kapa tsa sepakapaka, lisebelisoa tsa lipalangoang, lets'oao la therafiki. lisebelisoa, lisebelisoa kapa litsamaiso tse tšehetsang bophelo, lisebelisoa tse ling tsa bongaka kapa litsamaiso (ho kenyeletsoa lisebelisuoa tsa ho hlabolla moea le li-implants tsa ho buoa), taolo ea tšilafalo kapa taolo ea lintho tse kotsi, kapa litšebeliso tse ling moo ho hloleha ha sesebelisoa kapa Sehlahisoa ho ka bakang kotsi, lefu, thepa kapa tshenyo ya tikoloho ("Sebeliso e sa Rerelwang"). Bareki ba tla nka mehato efe kapa efe ho netefatsa hore ba sebelisa le ho rekisa Lihlahisoa ho latela melao le melawana e sebetsang. Khampani ha e na molato, ka kakaretso kapa ka karolo e itseng, 'me bareki ba tla lokolla Khampani ka tsela ena hammoho le barekisi ba eona le/kapa barekisi ho tsoa ho tseko efe kapa efe, tšenyo kapa melato e meng e hlahang kapa e amanang le Ts'ebeliso e sa Reroang ea Lihlahisoa. . Bareki ba tla buseletsa le ho boloka Khampani hammoho le bafani ba eona le/kapa barekisi ba eona ba se na kotsi ho tsoa le khahlanong le likopo tsohle, litjeo, litšenyehelo, le melato e meng, ho kenyeletsoa le likopo tsa ho tsoa kotsi kapa lefu, tse hlahang kapa tse amanang le Tšebeliso efe kapa efe e sa Reroang ea Lihlahisoa. . Lintlha tse tokomaneng ena li fanoe feela mabapi le Lihlahisoa.
Litokomane / Lisebelisoa
 |
GigaDevice GD32E231C-START Arm Cortex-M23 32-bit MCU Controller [pdf] Bukana ea Mosebelisi GD32E231C-START, Arm Cortex-M23 32-bit MCU Controller, Cortex-M23 32-bit MCU Controller, 32-bit MCU Controller, MCU Controller, GD32E231C-START, Controller |
