COSMIC WAVE/CW-1Y Ho lieha ho Filtering ka makhetlo a mangata
Buka ea Mong'a

Kea leboha ha u khethile sehlahisoa sa Free The Tone.
E le hore u nke advan e feletsengtage mabapi le likarolo le ts'ebetso eo e fanang ka eona, ka kopo bala bukana ea mong'a eona ka botlalo, 'me u e boloke sebakeng se bolokehileng bakeng sa tšebeliso ea nako e tlang.

Ho Tšoara Litlhokomelo

• Le ka mohla u se ke ua hokela kapa ua hakolla li-plug ho/ho tloha ho li-terminals tsa ho kenya/li-output ho COSMIC WAVE ha sesebelisoa sa kantle se khannang libui se tsamaisoa. Ho etsa joalo ho ka baka lerata le ho senya libui.
• Qoba ho sebelisa matla a feteletseng ho likonopo, li-switches tse masene, jack ea DC, le lijeke tsa mohala ho COSMIC WAVE.
• Se ke oa sutumetsa kapa oa tobetsa ponts'o ea COSMIC WAVE.
• Haeba yuniti e sa sebetse hantle kapa e sebetsa ka mokhoa o sa tsitsang, emisa ts'ebetso hang-hang 'me u ikopanye le morekisi oa lehae kapa Free The Tone ka kotloloho.

Litaolo le Lipontšo

Phanele e ka pele

Top Panel

HLOKOMELA
Ntle le adaptara ea AC-DC, yuniti ena e ka tsamaisoa ke betri ea 9-volt Alkaline. Bophelo ba betri bakeng sa tšebeliso e tsoelang pele (ho itšetlehile ka mofuta oa betri kapa boemo ba tšebeliso): lihora tse ka bang 2 (Mofuta oa alkaline. Hlokomela hore betri ea Manganese e ke ke ea sebelisoa ka lebaka la bophelo ba eona bo bokhutšoanyane.) Pontšo e bontša "LOW BATTERY" ha betri e phahama.tage fetoha tlase. Ka kopo fapanyetsana betri kapa sebelisa adaptara ea AC-DC.
Ho fapanyetsana le betri, tlosa likurufu tse 'nè holim'a poleiti e ka tlase.

Lehlakoreng la Panel

Rea u amohela lefatšeng la COSMIC WAVE!

COSMIC WAVE ke tieho ea dijithale e kopaneng, empa ea nako e telele e nang le lits'ebetso tse ngata tsa sefa. Setlhopha sa molumo sa yuniti ena se ka sebetsana le molumo oa tieho hore o be le molumo o monate kapa ka lehlakoreng le leng oa o fetola hore o be hole le oa mantlha. Filter ea thepa ea Cosmic e etsa hore ho be le molumo o hopotsang sebaka se ka ntle, ho eketsa 'mala o mocha melumong ea hau ea ho lieha. Re kentse lits'ebetso tse ncha tse joalo ka tokiso ea hanyane moo palo ea li-bits tsa molumo oa ho lieha e ka beoang ka li-unit tsa 1-bit, ho tloha ho boreleli le boleng bo holimo ba 24-bit ho isa ho molumo o thata oa 8-bit o nang le lerata le sothehileng.
Natefeloa ke lefatše la COSMIC WAVE ka likarolo tse ncha tse khahlang.

Filter ea Cosmic le ho Filtering ka makhetlo a mangata
Filter ea cosmic e na le phello eo butle-butle e fetohang ha nako e ntse e ea ho sehlopha se khethiloeng sa maqhubu ka ho sebelisa mokhoa oa rona o ikhethang oa ho sefa ho liehisa molumo. Ka ho beha palo ea maikutlo ho feta ka tloaelo, o ka boloka molumo oa tieho o ntse o lla ha o ntse o etsa liphetoho tsa molumo ka mochini oa cosmic.
Yuniti ena e ka sebelisa sefa sa eona le se lekanang ka nako e le 'ngoe. Setlhopha sa band-pass se ka fokotsa bandwidth ea molumo oa ho lieha. Ho fetola li-bandwidth tsa tlhahiso ho fetola molumo haholo ha melumo ea pele le ea ho lieha e kopane. Ha ho na moeli oa ho lieha ho feto-fetoha ha melumo e fihlelletsoeng ke kopanyo ea sefe ena ea band-pass le 3-band equalizer, hammoho le taolo ea TONE e kentsoeng ho lupu ea maikutlo ea tieho.
Litlhophiso tsa fektheri
COSMIC WAVE e romelloa ka li-presets tsa feme. Li bolokiloe mohopolong o setiloe esale pele ka mor'a No. 128 ka [ F: ] prefix ea nomoro e seng e setiloe. Basebelisi ba ka fetola sekhoudara sa DELAY TIME (PARAM) ho khetha le ho hopola setaele se lakatsehang sa feme.
Hlokomela hore sebaka sena sa feme e setiloe esale pele se sirelelitsoe khahlanong le ho hopola, ho ngola, kapa ho hlakola ts'ebetso ka matshwao a MIDI.
Hlokomela hore litekanyo tsa li-presets tsa feme li se li kopitsoe sebakeng se seng se tla sebelisoa ka mor'a hore se lokisoe ho latela khetho ea mosebelisi.
Bakeng sa lintlha tse ling mabapi le li-presets tsa feme, ka kopo sheba leqephe la sehlahisoa ho rona websebaka.

Mokhoa oa ho hopola li-Presets

Yuniti ena e fana ka li-presets tse 128 tse ka hopoloang ka mekhoa e mengata.
Fetola lipakeng tsa Presets 1 le 2 ka TAP Footswitch
Ho chencha lipakeng tsa Presets 1 le 2, tobetsa TAP footswitch bakeng sa metsotsoana e 0.5.
HLOKOMELA
Haeba TAP footswitch e behiloe ho [PS 1-2] skrineng sa Global Setup, li-presets tsena tse peli li fetoha hang hang ha footswitch e hatelloa.
Fetolela ho Preset e Lakatsehang ho tloha ho 128 Presets

1. Tobetsa konopo ea HOME ho bonts'a skrini sa HOME moo nomoro e seng e setiloe le lebitso le seng le setiloe li hlahisoang.
2.  Fetola sekhouto sa DELAY TIME (PARAM) ho fihlela nomoro eo u e batlang e bonts'itsoe skrineng. Li-LED tse peli tse khubelu ka holim'a TAP footswitch flash ka tsela e fapaneng. Hlokomela hore preset ha e hopolehe ntlheng ena.
3. Tobetsa TAP footswitch ho netefatsa ts'ebetso e hopotsang ea preset. Kamora ho netefatsoa, ​​li-LED tse peli tse khubelu li emisa ho benya.

Ho hopola Preset ka MIDI Signal
Litlhophiso tsa yuniti ena li ka fetoloa ka ho amohela lets'oao la MIDI le nang le nomoro ea phetoho ea lenaneo ho tsoa sesebelisoa sa kantle sa MIDI. Mocha oa MIDI oa sesebelisoa o romellang linomoro tsa phetoho ea lenaneo o tlameha ho tšoana le mocha oa MIDI oa COSMIC WAVE.

Mokhoa oa ho hlophisa litlhophiso tsa parameter le ho li boloka ho Preset

1. Tobetsa konopo ea SAVE. The SAVE LED le ponts'o ea nomoro e seng e setiloe li qala ho benya.
2. Fetola sekhoutara sa DELAY TIME (PARAM) ho fihlela ponts'o e bonts'a nomoro eo u e batlang, eo litlhophiso tse hlophisitsoeng li lokelang ho bolokoa ho tsona.
3. Tobetsa konopo ea SAVE ho boloka paramethara e hlophisitsoeng sebakeng se seng.

HLOKOMELA
Ho hlakola ts'ebetso ea ho boloka bohareng, tobetsa konopo efe kapa efe ea HOME kapa cursor ◀/▶ konopo ntle le SAVE switch ha nomoro e bonts'itsoeng ponts'o e ntse e benya.
Haeba paramethara ea ntho leha e le efe e bolokiloeng esale pele e fetoloa, letheba le hlaha ka tlaase ho le letona la nomoro ea pele ea nomoro eo e seng e setiloe. Ha paramethara e lokisitsoeng e bolokoa ho seta pele, letheba lena lea nyamela.

Hlahisa Litaba

Ka ho tobetsa HOME switch, skrine sa HOME le Operation skrini 1–3 switjha ka tatellano.
Skrine sa lapeng
E bonts'a nomoro e seng e setiloe le lebitso le seng le setiloe.

Skrine ea ts'ebetso ea 1
E bonts'a ts'ebetso ea knob kapa encoder ka 'ngoe le paramethara ea eona e behiloeng hajoale.

MIX LEVEL:
Fetola boemo ba motsoako oa melumo ea mantlha le ho lieha ho utloahala.
Ho fetolela kotola ka ho le letona ho eketsa boemo ba molumo oa ho lieha.
TLHALOSO:
E fetola palo ea maikutlo ea tieho. Ho fetolela konopo ka ho le letona ho eketsa palo ea maikutlo le palo ea ho lieha ho pheta-pheta. Ka kopo hlokomela hore haeba boleng ba maikutlo bo feta 100, molumo o tla eketseha nako le nako ha loop e pheta. (Moeli oa boemo ba tlhahiso o ka behoa ho Global Setup => Setting bakeng sa FEEDBACK LIMIT.)
TONE:
E fetola molumo (Timbre) oa molumo oa ho lieha. Ho fetola kotola ka ho le letona ho hatisa treble le ho hatella ka ho le letšehali. Haeba e setetswe ho 0, tshebetso ya TONE e a tingwa.
NAKO EA HO HLAHALA:
E fetola nako ea ho lieha. Ho fetolela encoder ka ho le letona ho eketsa nako ea ho lieha, 'me ka ho le letšehali hoa e fokotsa.

Skrine ea ts'ebetso ea 2

KAHLOLO:
E beha bolelele ba tieho joalo ka molaetsa. Ka ho sebetsana le kotara e le tšupiso ea tempo, nako ea ho lieha e ka beoa e le nako ea lengolo. Boleng ba kamehla ke Quarter note [Crochet]. O ka khetha ho tloha ho: Whole note [Semibreve] (1), Half note [Minim] (2), Dotted Quarter note (.4), Triplet in four (4/3), Quarter note [Crochet] (4), Dotted Noto ea borobeli (.8), Triplet ho tse peli (2/3), Noto ea Borobeli [Quaver] (8), Triplet ho e le 'ngoe (1/3), le Noto ea Leshome le metso e tšeletseng [Demiquaver] (16).
Ha yuniti ea ponts'o ea nako e le "msec", nako ea ho lieha e baloa ka bo eona ebe e hlahisoa ka nepo. Pontsho e ke ke ya fetoha ha yuniti ya pontsho ya nako e le “BPM”.

BOTEBO (MODULATION):
COSMIC WAVE e ka sebelisa modulation ho liehisa molumo.
Ho fetolela kotola ka ho le letona ho etsa hore modulation e tebe.
REATE (MODILATION):
E fetola lebelo la modumo o sebediswang ho tieho ya modumo. Ho fetolela konopo ka ho le letona ho potlakisa modulation.
INVERT:
Seta hore na o tla ntša molumo oa tieho mokhahlelong e le lets'oao la ho kenya kapa ka mokhahlelo o ka morao.
Ho ntša molumo oa tieho mokhahlelong oa morao, bulela encoder ebe o khetha HO BUA.

Skrine ea ts'ebetso ea 3

E 'ngoe le e' ngoe ea likonopo tsa L / C / R e sebelisetsoa ho lokisa sehlopha se lumellanang. Ha kotola e behiloe boemong ba hora ea 12 (boleng = 0), se lekanyang se tima.
Ho e retelehela ka ho le letona ho matlafatsa 'me ho le letšehali hoa khaoloa.
BASS (3 BAND EQ) :
E fetola molumo oa rejisetara ea bass. Maqhubu a lokelang ho lokisoa a ka khethoa skrineng sa Global Setup.
HAR'A (3 BAND EQ) :
E fetola molumo oa rejisetara e bohareng. Maqhubu a lokelang ho lokisoa a ka khethoa skrineng sa Global Setup.
TREBLE (3 BAND EQ) :
E fetola molumo oa rejisetara ea treble. Maqhubu a lokelang ho lokisoa a ka khethoa skrineng sa Global Setup.

NAKO E TSOANG PELE:
Fetola nako ho ntša molumo oa tieho. Nako ea tlhahiso ea molumo oa tieho e liehile ka nako e behiloeng skrineng sena. Ho fetolela encoder ho ea ka ho le letona ho eketsa nako ea ho lieha, 'me ho e fetolela ka ho le letšehali hoa fokotseha.
Ho liehisa nako eo molumo oa ho lieha o hlahisoang hanyane ho na le phello ea ho etsa hore ho be bonolo ho u utloa. Melumo e sa tloaelehang ea ho lieha e ka hlahisoa ka ho fetola nako ea tlhahiso haholo.

Edita Menu

Paramethara bakeng sa ho seta ka 'ngoe e hlophisitsoe ka mokhoa oa Edita.
Mokhoa oa ho fetola kapa ho netefatsa litlhophiso tsa parameter

1. Tobetsa konopo ea HOME ho bonts'a skrini sa HOME kapa Operation Screen 1, 2 kapa 3.
2. Tobetsa konopo ea cursor ka ho le letona ▶ ho hlahisa skrine ea Edita.
3. Sebelisa cursor e ka letsohong le letšehali ◀ kapa ka ho le letona ▶ konopo ho khetha mosebetsi o tla fetoloa.
4. Fetola sekhouto sa DELAY TIME (PARAM) ho fetola paramethara.
5. Kamora ho netefatsa kapa ho edita, tobetsa konopo ea HOME. Pontšo e khutlela skrineng sa HOME.

HLOKOMELA
Bakeng sa lenane le felletseng la lintho tsa menyu tsa Edita, sheba ho Edit Menu Flowchart ho leq.16.

Mesebetsi ho Edit Screen

1. MOKHOA OA MOKHOA
   Beha mokhoa oa cosmic. U ka khetha ho li-setting tse 5 tse fapaneng tsa Cosmic Filter.
   Ho khetha Cosmic Mode E ho bonts'a COSMIC E: litlhophiso tsa phaello le khafetsa tse bolokiloeng maemong a lefats'e.
   Paramethara OFF (ea kamehla), A, B, C, D, E
2. LITŠOANTŠISO MAKHOA
   E fetola palo ea li-bits tsa tlhahiso bakeng sa molumo oa ho lieha ho tloha ho 8-bit ho isa ho 24-bit. Ha palo ea li-bits e le kholoanyane, ka botšepehi molumo o tla hlahisoa ho pontšo e sebetsoang ke DSP. Ka lehlakoreng le leng, ha palo ea li-bits e fokotseha, ho ba thata ho hlahisa ka botšepehi, 'me karolo ea ho lieha e nang le molumo o tlaase e hlahisoa e le lerata.
   Paramethara 8-24 (boleng ba kamehla: 24 BITS)
3. MABAPI PASELA SEI
   E khetha filthara ea sehlopha ho tsoa mefuteng e mehlano.
   Paramethara OFF (ea kamehla), 40-18k, 50-15k, 60-12k, 60-9k, 60-2k
4. RETS'ELISITSOE TSIETSO
   E bulela kapa e tima tieho e ka morao. Khetha [ON w/DRY] (melumo ea morao-rao le ea morao-rao ea tieho e hlahisoa) kapa
   [ON woDRY] (ke molumo feela oa ho lieha ha morao o hlahisoang.
   Parameter OFF (kamehla), E BUTSE ka DRY, BUTSE ntle le DRY
5. TSELA
   E khetha hore na molumo oa tieho o tla bolokoa kapa che ha phello e buletsoe/e tima kapa ha preset e fetoloa. Haeba boleng ba FEEDBACK bo behiloe ho feta 90, yuniti e tla fokotsa ka bo eona palo ea maikutlo ho theola molumo oa ho lieha ha molumo butle-butle.
   Paramethara OFF (kamehla), ON
6. Tlhophiso ea Kabelo ea EXP/CV/FS Terminal (EXP/FS ASSIGN)
   COSMIC WAVE e ka abela tšebetso ho terminal ea eona ea EXP/CV/FS. Tobetsa konopo ea cursor ▶ ho fihlela ponts'o e bontša skrine ea Setting ea Mosebetsi. Ebe u fetola sehokelo sa DELAY TIME(PARAM) ho khetha mosebetsi oo u tla o abeloa.
   HLOKOMELA
   Bakeng sa mesebetsi e abeloang EXP/CV/FS terminal, sheba tafole e arohaneng (Assignable Functions leqepheng la 19).
   Ho beha Tšebeliso ea External Footswitch bakeng sa ho Khetha hore na o tla ntša Letšoao la ho Kena (Molumo o omileng) kapa che.
   Ho ka sebelisoa footswitch ea kantle (mofuta oa nakoana) o hokahaneng le EXP/CV/FS ho khetha hore na o tla ntša (ON) lets'oao la ho kenya kapa che (OFF).
   1. Tobetsa cursor ▶ konopo ho bontša skrine ea EXP/FS ASSIGN.
   2. Fetola sekhouto sa DELAY TIME (PARAM) ho khetha DRY ONOF.
   3. Tobetsa konopo ea HOME. Pontšo e fetoha skrineng sa HOME.
   HLOKOMELA
   Ha phello e sebetsa, molumo o omileng o ka buloa / oa tima ka ho sebelisa footswitch e ka ntle.
   Ho boloka tlhophiso e fetotsoeng sebakeng se seng se setilwe, sheba ho “Mokgwa wa ho Edita Setting ya Parametha le ho Boloka ho Preset” ho leq. 7.
7. PRESET NAME - Ho reha Litlhophiso tsa Pele
   Setulo se seng le se seng se ka rehoa.
   Tlhaku e ka kenngoa sebakeng sa cursor (ponts'o e inverted). Tobetsa konopo ea ◀/▶ cursor ho tsamaisa ntlha ea ho kenya. Fetola sekhouto sa DELAY TIME (PARAM) ho khetha tlhaku eo u e batlang. Ho hlakola tlhaku, tobetsa PRESET footswitch hang: sebapali se sebakeng sa cursor se hlakotsoe 'me lengolo lohle le suthisetsoa ka ho le letšehali. Ho kenya tlhaku, tobetsa konopo ea ON/OFF footswitch hang. Ho kentsoe sebaka 'me leibole kaofela ka mor'a hore sebaka sa khesara se suthisetsoe ka ho le letona. Ka mor'a ho kenya / ho fetola lebitso le seng le setiloe, tobetsa konopo ea SAVE ho e boloka.
   Kapa ho hlakola ts'ebetso, tobetsa HOME switch kapa bula konopo efe kapa efe.

Litlhophiso tsa Global

Global Setup Screen
Tobetsa 'me u tšoare HOME switch bakeng sa metsotsoana e ka bang 2 ho bontša skrine ea Global Setup.
E bonts'e ha u seta mesebetsi ea Global ea COSMIC WAVE joalo ka li-setting tsa kanale tsa MIDI.

Ho beha Mekhoa ea Mesebetsi ea Lefatše
Ka skrineng sa Global Setup, litlhophiso tse amanang le ts'ebetso eohle joalo ka MIDI fumana khetho ea mocha,
teka-tekano ya pedali ya polelo, jj. di a hlophiswa.

1. Tšoara fase switch HOME metsotsoana e ka bang 2 ho bontša skrine ea Global Setup.
2. Sebelisa konopo ea ◀/▶ cursor ho bonts'a skrine eo u e batlang.
3. Lokisa mosebetsi o lakatsehang.
4. Tobetsa konopo ea HOME. Pontšo e fetoha skrineng sa HOME.
   HLOKOMELA
   Bakeng sa lenane le felletseng la lintho tsa menu tsa Global, sheba Global Menu Flowchart ho leq. 16.

MIDI CH - Litlhophiso tsa MIDI Amohela Channel
E beha mocha oa ho amohela MIDI.
Paramethara OMNI (ea kamehla): E amohela matšoao ohle a MIDI ho tloha ho CH1 ho isa ho CH 16.
CH1 ho isa ho 16: E amohela matshwao a MIDI ho tswa ho kanale e kgethilweng ya MIDI.
TIMA:
Ha ho matšoao a MIDI a amoheloang.

1. msec/BPM - Ho beha Pontšo ea Nako ea ho lieha
   E khetha yuniti ea pontšo ea nako ea ho lieha.
   Paramethara msec (ea kamehla): Nako ea ho lieha e bontšoa ka milliseconds.
2. BPM:
   Nako ea ho lieha e bontšoa ho BMP.
   HLOKOMELA
   BPM: Otla ka Motsotso. E sebelisoa ho bonts'a tempo ea ts'ebetso e bonts'itsoeng ke palo ea lintlha tsa kotara (li-crotchets) tse baloang motsotsong o le mong (metsotsoana e 60).
   msec: E khuts'oane bakeng sa millisecond. 1 millisecond e lekana le sekete sa motsotsoana.
   ex) 100 msec = 0.1 metsotsoana. Nako ea ho lieha e ka beoa ho tloha ho 1 msec ho isa ho 9,999 msec (hoo e ka bang metsotsoana e 10).
3. TAP FSW - Litlhophiso tsa TAP Footswitch
   E khetha mosebetsi o tla abeloa TAP footswitch.
   TAP ea paramethara (ea kamehla): TAP ea ho kena tempo e abetsoe.
   PRESET 1-2: Mongolo o mong le o mong oa footswitch o hopola li-presets tsa 1 le 2 ka tsela e fapaneng.
4. TLHOKOMELISO - Ho beha Pele ho Nako ea ho lieha
   E beha nako ea ho lieha ho tlang pele ha preset e fapoha.
   Parameter PRESET (default): Nako ea ho lieha e bolokiloeng ho preset e tla pele.
   TLANYA:
   Nako ea ho lieha e kentsoeng ea Tap e tla pele. Ha ho seta esale pele ho hopoloa, nako ea ho lieha e bolokiloeng e hlokomolohuoa 'me nako ea ho lieha e kentsoeng ka theipi ea sebelisoa.
5. RESAMPLE - Ho beha Boitšoaro ka ho lieha ho fetoha ha nako
   E beha mokhoa oa ho fetohela ho molumo oa tieho ha nako ea tieho e fetoloa ke TAP tempo ho kena.
   Parameter OFF (kamehla): Molumo oa tieho o emisoa hang ebe o sa tsoa hlahisoa ka tlhophiso e ncha ea nako ea ho lieha.
   BULELA:
   Molumo oa ho lieha ha o emisoe empa o fetisetsoa ho o nang le nako e sa tsoa sebelisoa ea ho lieha. Ka kopo hlokomela hore molumo oa molumo oa ho lieha ho tla fetoha ha nako ea ho lieha e fetoha.
6. FREQ BAS - Ho hlophisoa ha 3-BAND EQ / BASS Frequency
   E khetha maqhubu a abetsoeng sehlopha sa BASS sa 3-band EQ.
   Paramethara 100 Hz, 200 Hz (ea kamehla), 300 Hz
7. FREQ MID - Ho beha 3-BAND EQ / Middle Frequency
   E khetha maqhubu a abetsoeng sehlopha sa MIDDLE sa 3-band EQ.
   Parameter 500 Hz, 750 Hz (ea kamehla), 1 kHz
8. FREQ TRB - Ho hlophisoa ha 3-BAND EQ / TREBLE Frequency
   E khetha maqhubu a abetsoeng sehlopha sa TREBLE sa 3-band EQ.
   Paramethara 1.5 kHz, 2.0 kHz (ea kamehla), 3.5 kHz
9. COSMIC E: PHAIN - Ho beha Phano ea Cosmic Filter
   E beha phaello ea filthara ea Cosmic e sebelisitsoeng ho Cosmic Mode E. Ha phaello e phahame, e matlafatsa phello ea sefe.
   Paramethara 0.00 ho isa ho 0.99 (boleng ba kamehla: 0.15)
10. COSMIC E: FREQ - Ho beoa ha Cosmic Filter Frequency
    E khetha khafetsa ea sefe ea Cosmic e sebelisoang ho Cosmic Mode E. Molumo oa tieho o kopana ho leba sehlopheng se behiloeng sa frequency.
    Paramethara 300 Hz ho isa ho 1454 Hz (boleng ba kamehla: 1297 Hz)
11. FB LIMIT - Ho ipehela Moedi oa Maikutlo a Maikutlo
    Haeba palo e kholo ea maikutlo e setiloe, molumo oa eketseha nako le nako ha loop e phetoa. Paramethara ena e fokotsa boemo ba tlhahiso ho qoba ho romela matšoao a nang le maemo a feteletseng ho gear e hokahaneng ka mor'a yuniti ena.
    Paramethara -50 dB ho isa ho 0 dB (boleng ba kamehla: -20 dB)
12. DRY - Setting of Dry Sound
    E beha hore na lets'oao la ho kenya (molumo o omileng) le hlahisoa joang.
    Parameter ON (kamehla): Molumo o omileng o tsoa.
    TIMA:
    Molumo o omileng oa khutsisoa 'me ke molumo oa ho lieha feela o hlahisoang.
    HLOKOMELA
    Ha OFF e khethiloe, molumo o omileng oa khutsisoa le ha phello e TIMA.
13. EXP CALB – Calibration of Expression Pedal
    Pedali ea polelo e hokahaneng le terminal ea EXP/CV/FS e ka sebelisoa ho lokisa paramethara ea COSMIC WAVE ka nako ea nnete. Kaha lipehelo tsa polelo li na le litšobotsi tse fapaneng tsa ts'ebetso, COSMIC WAVE e ka khona ho lekanya poleloana ea pedal hore e sebelisoe. Sebelisa pedal ea polelo e nang le khanyetso e fapaneng ho tloha ho 10 kΩ ho isa ho 25 kΩ.
    1. Kgetha skrine sa EXP CALB.
    2. Hokela pedal ea hau ea polelo ho theminale ea EXP/CV/FS.
    3. Tobetsa konopo ea SAVE.
    4. Skrine e totobatsa "TOE MAX." Beha pedal ea polelo pheletsong ea eona ea monoana (max.) ebe o tobetsa konopo ea SAVE.
    5. Skrine e totobatsa "HEEL MIN." Beha pedal ea polelo pheletsong ea eona ea serethe (min.) ebe o tobetsa konopo ea SAVE.
    6. Tshebetso ya ho lekanya e phethelwa ha pontsho e bontsha "EXT CALB E FEDILE."
14. EXP DISP - Pontšo ea Expression Pedal
    Skrine sena se beha hore na skrini se bontša paramethara e fetotsoeng ka ho sebelisa pedal ea polelo.
    Paramethara ON (Default): Litekanyetso li bonts'oa skrineng.
    TIMA:
    Ts'ebetso ea ho bonts'a parametha ha e sebetse
15. E qala
    Sebelisa ts'ebetso ena ho khutlisetsa yuniti maemong a feme ea thomello. Ka kopo ela hloko ha u sebelisa sena kaha litlhophiso tsohle tsa mosebelisi li tla hlakoloa.
    1. Ho skrineng sa Global Setup, khetha [15] INITIALIZE.
    2. Netefatsa hore SAVE LED ea benya ebe o tobetsa konopo ea SAVE.
    3. Pontsho e bontsha “INITIALIZING…” ha qalo e qala.
    4. Skrine sa Global Setup se tla hlaha hape ha qalo e phethiloe.
16. FIRMWARE - Ntlafatso ea Firmware
    Basebelisi ba ka ntlafatsa firmware ea COSMIC WAVE ho ea morao-rao.
    Bakeng sa firmware ea morao-rao, litaelo tsa ntlafatso le khokahano, ka kopo etela leqephe la sehlahisoa kapa leqephe la tšehetso ho rona websebaka.

Tšebeliso ea EXP/CV/FS Terminal

Pedali e tloaelehileng ea polelo e ka hokela ho terminal ea EXP/CV/FS ka ho sebelisa thapo ea TRS.
Bakeng sa mesebetsi e ka abeloang pedal ea polelo, sheba "Lenane la Mesebetsi e Abeletsoeng."
Litlhoko tsa Pedal Expression
Boleng ba ho hanyetsa bo khothalelitsoeng: 10 kΩ ho isa ho 25 kΩ
KELETSO: Wiper of expression pedal (output)
RING: Matla (5 V e fanoa ho tsoa ho COSMIC WAVE)
LEBAKA: GND
HLOKOMELA: Bakeng sa lipedali tse khothaletsoang, sheba ho Free The Tone websebaka.
Terminal ea EXP/CV/FS e amohela matla a taolotage (CV) ka boholo ba 0 ho isa ho 5 V. Ho hokahanya, sebelisa mohala oa mohala oa monaural.

Fetola Phallo ea Menu

Global Menu Flowchart

Lethathamo la Li-Parameters le Linomoro tse Tšoanang tsa MIDI CC

COSMIC WAVE e ka fetola li-presets kapa ea fetola liparamente tsohle ka matšoao a MIDI. Tafole e ka tlase e bonts'a likabelo tsa lets'oao la MIDI.

TLHALOSO	PHAnele PONTŠO	PARAMETER BOHLOKO RANGE	CC NUMBER	VALUE
tieho NAKO	tieho NAKO	1msec-10.0sec	61	0(1msec)-127(1000msec) 8 msec mohato
TS'ELISO	TS'ELISO	0-127	62	0-127
TS'EBETSO	TS'EBETSO	-63—63	63	0(-63) - 127(63)
TS'OANE LESENYA	TS'OANE LESENYA	0-127	64	0-127
OMETSA	OMETSA	OOOF	65	tima = 0, ho =127
KAHLOLO	KAHLOLO	1, 2, .4, 43, 4, .8, 23, 8,13,16	66	1(1), 2(2), .4(3), 43(4), 4(5), .8(6), 23(7), 8(8), 13(9), 1600)
TSELA	TSELA	OOOF	67	tima = 0, ka = 127
EC/	BASESE	-63 —TLOHELO—+63	68	0-127(-63=0, 0=64, 63=127)
	HARE	-63 —TLOHELO—+63	69	0-127(-63=0, 0=64, 63=127)
	KHAHLISO	-63 —TLOHELO—+63	70	0-127(-63=0, 0=64, 63=127)
MOEKETSI MOHAPI	MODIMO BOTEBO	0-127	71	0-127
	Tekanyo ea MOD	0-127	72	0-127
TS'EPA	TS'EPA		74	tima = 0, ho =127
TLAPA	TLAPA		75	127(TAP)
LIEKETSENG OWOFF	OOOF		76	tima = 0, ka = 127

Lethathamo la Mesebetsi e Abeletsoeng

DELAY TIME (Tsa kamehla)	Tlhaloso ea Pedal
TS'EBETSO	Tlhaloso ea Pedal
TS'ELISO	Tlhaloso ea Pedal
TS'OANE LESENYA	Tlhaloso ea Pedal
MOEKETSO BOTEBO	Tlhaloso ea Pedal
MOEKETSI SEBAKA	Tlhaloso ea Pedal
OMETSE OO	Momentary Footswitch
TLAPA	Momentary Footswitch
TS'EPA	Momentary Footswitch
Fx ON/OFF	Momentary Footswitch

Litlhaloso tsa mantlha /Maemo

• Palo ea li-presets: li-presets tse 128 tsa basebelisi, li-presets tse 11 tsa feme
• Tšitiso ea ho kenya: 1 MΩ
• Tšitiso ea sephetho: min. 10 kΩ
• Max. boemo ba ho kenya: +10 dBm
• Litheminale: 1 x 1/4” jeke e tloaelehileng ea mohala oa TRS (IN(TRS)), 3 x 1/4” jeke e tloaelehileng ea mohala ea TS (OUT/L, OUT/R, EXP/CV/FS), 9 VDC input jack ( bakeng sa adaptara ea AC), jeke e nyane ea stereo ea 3.5-mm (MIDI IN)
• Phepelo ea matla: AC/9VDC adaptara, 006P (9V) 6F22 betri (mofuta oa alkaline)
• Tšebeliso ea hona joale: hoo e ka bang. 185 mA
• Litekanyo: 66 (W) x 125 (D) x 54 (H) limilimithara (ho kenyeletsoa le li-protrusions tse kang lijeke)
• Boima ba 'mele: hoo e ka bang. 335 g
• Lisebelisoa: Karete ea waranti, Web Karete ea ho fihlella, litaelo tsa polokeho, maoto a rabara
  HLOKOMELA: Tlhaloso le ponahalo ea ka ntle li ka fetoha ntle le tsebiso.

Litokomane / Lisebelisoa

MAHALA TONE COSMIC WAVE/CW-1Y Ho lieha ho Filtering ka makhetlo a mangata [pdf] Buka ea Mong'a COSMIC WAVE CW-1Y Ho lieha ho Filtering ka makhetlo a mangata, COSMIC WAVE, COSMIC Multiple Filtering Litiehi, WAVE Multiple Filtering Litieho, CW-1Y Multiple Filtering Litiehi, Multiple Filtering, CW-1Y, Filtering Litie, Multiple Filtering.

Litšupiso

• Bukana ea Mosebelisi