FlySpark F4 V1 Stack Flight Controller
Litlhaloso
- Lebitso la Sehlahiswa:
FlySpark F4 V1 BLS 60A Stack - Likarolo tsa AI:
Sensor Fusion, PID Autotuning, Adaptive Filtering - Ts'ehetso ea Software:
Betaflight, INAV, Ardupilot, EMU-flight, SkyBrush - ESC Communication:
BLHeli_S Bluetooth & USB-C - Khokahano:
3-6S LiPo - Boemo:
47.8mm(L) x 47.5mm(W) x 18.3mm(H) - Ho hlongoa:
30.5 x 30.5mm ka boholo ba lesoba la 4mm - Boima ba 'mele:
34g
Litaelo tsa Tšebeliso ea Sehlahisoa
FlySpark F4 V1 Sefofane sa Sefofane
Ponahalo:
Refer to the user manual for the layout of the flight controller.
Pheripheral Connection:
Connect peripherals as per the provided diagram.
Litlhophiso tsa App & FC:
Use the recommended apps and follow the configuration instructions.
Ntlafatso ea Firmware ea FC:
Connect the flight controller to a PC via USB for firmware updates.
FLYSPARK BLS 60A 4-IN-1 ESC
Ponahalo:
Check the layout guide in the manual for proper installation.
Khokahano le Motors & Power Cable:
Connect motors and power cables securely.
Tlhophiso ea ESC:
Use the FlySpark app for ESC configuration settings.
Ntlafatso ea Firmware ea ESC:
Follow the provided steps to update the firmware for ESC.
FlySpark F4 V1 BLS 60A Stack
Lintlha tse Feletsengview
Sephutheloana
- FlySpark F4 V1 Flight Controller x 1
- FlySpark BLS 60A 4-in-1 ESC x 1
- 35V 1000uF Tlase ESR Capacitor x 1
- M3 Nate ea Nylon x 4
- SH 1.0mm 25mm-bolelele ba 8pin Cable(bakeng sa kgokelo ya FC-ESC) x 1 SH 1.0mm 75mm-bolelele ba 6pin Cable* x 1
- M3*30mm Iner-hexagon Screw x 4
- DJI 6pin Cable(80mm) x 1
- XT60 Power Cable(100mm) x 1
Setšoantšo sa Khokahano ea FC
Tataiso ea likhokahano tsa FC & ESC
Mokhoa oa 1:
- Using 8.Pin JST Cable
Mokhoa oa 2:
Ka ho Otloloha Soldering
- Lithapo tse 8 tsa Solder ho ea ho li-pads tse 8 pheletsong ka 'ngoe, ho latela litlhaloso tse ka tlase
Litlhaloso tsa molaoli oa sefofane
- Sebelisa thapo ea 6-pin e tla le O3 Air Unit
- Sebelisa thapo ea 6-pin e tla le FlySpark F4 V1 BLS 60A Stack
F C Firmware update
To update the firmware for your FlySpark F4 VI flight controller, please follow these steps:
Connect the Flight Controller to Your PC:
- Use a USB cable to connect the FlySpark F4 VI flight controller to your PC
Open Betaflight I INAV Configurator.
- . Launch the Betaflight Configurator or INAV Configurator on your PC. For this guide, we’ll use Betaflight Configurator as an example.
Navigate to Firmware Flashing:
- In the Betaflight Configurator, navigate to the ‘Firmware Flashing’ page.
Select Target and Flash Firmware:
- Choose the target firmware for ‘Flyspark F4 VI’ from the dropdown menu.
- Initiate the firmware flashing process.
Hlokomela:
The Flyspark F4 VI flight controller does not support wireless firmware flashing. It must be performed using a USB connection to your PC.
Flyspark BLS 60A 4-in-l ESC
Khokahano le Motors & Power Cable
ESC Specs FlySpark F4 V1 BLS 60A Stack
Ntlafatso ea Firmware ea ESC
8-bit 50A ESC ena e tla pele e tlatsitsoe ka firmware ea BLHeliS empa e ka khantša ho Bluejay firmware, e fana ka RPM filtering le Bi-directional Dshot tšehetso. Latela mehato ena ho ntlafatsa firmware:
- Prepare Your Drone:
Remove all propellers from your drone for safety. - Connect ESC to Flight Controller:
Ensure the flight controller is properly connected to the ESC, then power up the drone. This step ensures the ESC initializes correctly. - Hokela ho PC:
Use a USB Type-C cable to connect the flight controller to your computer. - Access Firmware Configuration:
Open the Chrome browser and visit: www.esc-configurator.com - Flashing Steps:
Follow the firmware flashing steps displayed on the configurator website. Ensure you select the appropriate options for flashing to Bluejay firmware.
LITLHAHISO:
- PROPELLERS OFF: REMOVE ALL PROPELLERS.
- SECURE CONNECTION: ENSURE SECURE ESC CONNECTION.
- FOLLOW STEPS: FOLLOW FLASHING INSTRUCTIONS CAREFULLY.
- STABLE POWER: ENSURE STABLE POWER SUPPLY.
- www.FlySpark.in
FAQs
Nka ntlafatsa firmware ea ESC joang?
To update the ESC firmware, follow these steps: 1. Prepare Your Drone: Remove all propellers for safety. 2. Connect ESC to Flight Controller: Ensure proper connection to the ESC and power up.
Litokomane / Lisebelisoa
 |
FlySpark F4 V1 Stack Flight Controller [pdf] Bukana ea Mosebelisi F4 V1, BLS 60A, F4 V1 Stack Flight Controller, F4 V1, Stack Flight Controller, Flight Controller, Controller |