mohloli 8A.04 Arduino Pro Relay
Tlhahisoleseding ya Sehlahiswa
Sehlahisoa ke mohloli oa Sehlopha sa 2 o nang le boholo ba hona joale ba 200 mA le torque ea 0.8 Nm. E na le liphetho tse 4 ka tloaelo tse bulehileng (SPST) tse nang le lintlha tse 10 A ho 250 V AC1 le 4 A ho 24 V DC1. Sehlahisoa se na le lisebelisoa tse 8 tsa dijithale / analog (0…10 V) mme se na le tšitiso ea 1M~. E na le mokhoa oa ho phahamisa seporo 'me ke mofuta o bulehileng o nang le mefuta e mengata ea mongobo oa 5-95 RH% le bophahamo ba ho fihla ho 2000 m. Sehlahisoa se na le litekanyetso tsa IP20 'me se tla ka mefuta e meraro: Lite, Plus, le Advanced.
Sehlahisoa se tsamaisoa ke STM32H747XI Dual ARM R Cortex R M7/ M4 IC e nang le motheo o le mong oa ARM R Cortex R -M7 ho fihla ho 480 MHz le motheo o le mong oa ARM R Cortex R -M4 ho fihla ho 240 MHz. E na le kou ea USB Type C 10/100 Ethernet 'me e tla le likhetho tsa khokahanyo tsa Wi-Fi + BLE (8A-8320) le RS485 (8A-8310 + 8A-8320). E boetse e na le ntho e sireletsehileng e kopantsoeng ho eona. Sehlahisoa se na le boholo ba 9mm mme se amohela lithapo tsa (1×6/2×4) mm2 (1×10/2×12) AWG. E na le tekanyo ea matla ea 1/2 HP ho 240 V AC le 1/4 HP ho 120 V AC.
Litaelo tsa Tšebeliso ea Sehlahisoa
Sehlahisoa se etselitsoe ho beoa seporong sa EN 60715. E ka hokeloa ho fihla ho tse 8 tsa dijithale/analoge (0…10 V) ho sebelisa mehala ea (1×6/2×4) mm2 (1×10/2×12) AWG. Sehlahisoa se na le liphetho tse 4 ka tloaelo tse bulehileng (SPST) tse nang le lintlha tse 10 A ho 250 V AC1 le 4 A ho 24 V DC1. Sehlahisoa se ka laoloa ho sebelisoa lisebelisoa le lihlahisoa 'me se tsamaisoa ke STM32H747XI Dual ARM R Cortex R M7/ M4 IC e nang le Wi-Fi + BLE (8A-8320) le RS485 (8A-8310 + 8A-8320) likhetho tsa khokahanyo. Sehlahisoa se na le ntho e sireletsehileng e kenyellelitsoeng ho eona mme e behiloe IP20. E na le mongobo o atolositsoeng oa 5-95 RH% le bophahamo ba ho fihla ho 2000 m. Sehlahisoa se tla ka mefuta e meraro: Lite, Plus, le Advanced.
Likaroloana
 |
8A.04.9.024.83xx |
| UN (12…24) V DC
+–15% Mohloli oa sehlopha sa 2 Ke <200 mA |
|
|
SEHLOOHO |
4 NO (SPST)
10 A, 250 V AC1 4 A, 24 V DC1 M 1/2 HP 240 V AC 1~ 1/4 HP 120 V AC |
KEKETSO |
8 dijithale/analoge (0…10 V) |
 |
STM32H747XI Dual ARM R Cortex R
M7/ M4 IC: 1x ARM R Cortex R -M7 konokono ho fihla ho 480 MHz 1x ARM R Cortex R -M4 konokono ho fihla ho 240 MHz |
 |
Mofuta oa USB oa C
10/100 Ethernet RS485 (8A-8310 + 8A-8320) Wi-Fi + BLE (8A-8320) |
 |
Sireletsehile element kopantswe |
 |
(–20…+50)°C |
| Mofuta o bulehileng, EN 60715 seporo se ntseng se hola Maemo a Tikoloho: Mongobo o Atolositsoeng 5-95 RH% Bophahamo ba 2000 m IP20 |
|
TLHOKOMELO FCC
FCC le TLHOKOMELO E FUBEDU
(MOHLALA: 8A.04.9.024.8320)
Liphetoho life kapa life tse sa amoheloeng ka kotloloho ke mokha o ikarabellang bakeng sa tumellano li ka hlakola matla a mosebelisi a ho sebelisa sesebelisoa. Sesebelisoa sena se lumellana le karolo ea 15 ea Melao ea FCC. Ts'ebetso e ipapisitse le maemo a mabeli a latelang:
- Sesebelisoa sena se ka 'na sa se ke sa baka tšitiso e kotsi.
- Sesebelisoa sena se tlameha ho amohela tšitiso efe kapa efe e amohetsoeng, ho kenyeletsoa tšitiso e ka bakang ts'ebetso e sa batleheng.
Tlhaloso ea Phaello ea Mahlaseli a FCC RF
- Transmitter ena ha ea lokela ho ba sebakeng se le seng kapa ho sebetsa mmoho le antenna efe kapa efe kapa transmitter.
- sesebelisoa sena se lumellana le meeli ea ho pepeseha ha mahlaseli a RF e behiloeng bakeng sa tikoloho e sa laoleheng
- sesebelisoa sena se lokela ho kenngoa le ho sebetsoa ka sebaka se bonyane 20 cm pakeng tsa radiator le 'mele oa hau
HLOKOMELA
Thepa ena e lekiloe 'me e fumanoe e lumellana le meeli ea sesebelisoa sa digital sa Sehlopha sa A, ho latela karolo ea 15 ea Melao ea FCC. Meeli ena e etselitsoe ho fana ka tšireletso e utloahalang khahlanong le tšitiso e kotsi ha thepa e sebelisoa sebakeng sa khoebo. Thepa ena e hlahisa, e sebelisa, 'me e ka khantša matla a maqhubu a seea-le-moea, 'me haeba e sa kengoa le ho sebelisoa ho latela bukana ea litaelo, e ka baka tšitiso e kotsi likhokahanong tsa radio. Ho sebetsa ha thepa ena sebakeng sa bolulo ho ka 'na ha baka tšitiso e kotsi moo mosebedisi a tla hlokeha ho lokisa tšitiso eo ka litšenyehelo tsa hae.
KHIBIDUDU
- Sehlahisoa se lumellana le litlhoko tsa bohlokoa le lipehelo tse ling tse amehang tsa Directive 2014/53/EU.
- Sehlahisoa sena se lumelletsoe ho sebelisoa linaheng tsohle tsa litho tsa EU.
| Maqhubu a maqhubu | Boholo ba matla a hlahisoang (EIRP) |
|
2412 - 2472 MHz (2.4G WiFi) 2402 - 2480 MHz (BLE) 2402 - 2480 MHz (EDR) |
5,42dBm 2,41dBm -6,27 dBm |
- 8A.04.9.024.8300 Lite Version
- 8A.04.9.024.8310 Plus Version
- 8A.04.9.024.8320 Phetolelo e tsoetseng pele
LIEKETSENG
LETŠOANTŠO LEOOETSOANG
- 2a Feela bakeng sa 8A.04-8310 le 8A.04-8320
PELE VIEW
- 3a Libaka tsa phepelo ea motlakase 12…24 V DC
- 3b I1….I8 li-terminals tsa ho kenya tsa dijithale/analoge (0…10 V) li ka hlophisoa ka IDE
3c Seta konopo hape: e kenya sesebelisoa ka mokhoa oa bootloader.- Ho e tobetsa habeli ho tla qala sesebelisoa hape. (Tobetsa ka sesebelisoa se nchocho se arotsoe)
- 3d Konopo ea programmable ea mosebelisi
- 3e Boemo ba ho ikopanya le LED 1…4
- 3f Relay tlhahiso ditheminara 1…4, NO kopana (SPST) 10 A 250 V AC
- 3g Lefatše le sebetsang
- 3h Ethernet port boemo ba LED
- 3i Sets'oants'o sa label 060.48
- 3j Lisebelisoa tsa khokahano ea MODBUS RS485
- (feela bakeng sa liphetolelo 8A.04-8310/8320)
- 3k USB Type C bakeng sa ho etsa mananeo le ho rekota data
- 3m Boema-kepe ba Ethernet
- 3n Port bakeng sa puisano le khokahanyo ea li-module tse thusang
HO FIHLA MOTSOALLE
Ho qala - IDE
- Haeba u batla ho hlophisa 8A.04 ea hau ha u ntse u le sieo inthaneteng u hloka ho kenya Arduino Desktop IDE.
- Ho hokela 8A.04 komporong ea hau, o tla hloka Mofuta oa C - thapo ea USB.
- Sena se boetse se fana ka matla ho boto, joalokaha ho bontšitsoe ke LED.
- https://www.arduino.cc/en/Main/Software
HO QALA – ARDUINO WEB MOHLOLI
- Liboto tsohle tsa Arduino, ho kenyeletsoa le ena, li sebetsa ka ntle ho lebokose la Arduino
- Web Editor, ka ho kenya feela plugin e bonolo.
- Arduino Web Editor e tsamaisoa inthaneteng, ka hona e tla lula e le morao-rao ka likarolo tsa morao-rao le tšehetso bakeng sa liboto tsohle.
- Latela ho qala ho kenya likhoutu ho sebatli le ho kenya litšoantšo tsa hau botong ea hau.
- https://create.arduino.cc/editor
- https://create.arduino.cc/projecthub/Arduino_Genuino/getting-startedwith-arduino-web-editor-4b3e4a
HO QALA – ARDUINO IOT cloud
Lihlahisoa tsohle tse nolofalitsoeng tsa Arduino IoT li tšehetsoa ho Arduino IoT Cloud e u lumellang hore u kene, u kenye le ho sekaseka lintlha tsa sensor, ho qala liketsahalo, le ho iketsetsa ntlo kapa khoebo ea hau.
HLOKOMELA: Haeba thepa e sebelisoa ka tsela e sa boleloang ke moetsi, tšireletso e fanoeng ke thepa e ka senyeha.
Mohlala oa Tšebeliso: IB8A04VXX
Sehlopha sa Finder SpA
- con unico socio - 10040 ALMESE (TO) ITALY
Litokomane / Lisebelisoa
 |
mohloli 8A.04 Arduino Pro Relay [pdf] Litaelo 8A.04.9.024.83xx, 8A-8310, 8A-8320, 8A.04 Arduino Pro Relay, 8A.04, 8A.04 Relay, Arduino Pro Relay, Relay |
