esp-dev-kits
ESP32-P4-Function-EV-Board » ESP32-P4-Function-EV-Board
ESP32-P4-Function-EV-Boto
Tataiso ena ea mosebelisi e tla u thusa ho qala ka ESP32-P4-Function-EV-Board hape e tla fana ka leseli le tebileng.
ESP32-P4-Function-EV-Board ke boto ea ntlafatso ea multimedia e thehiloeng ho chip ea ESP32-P4. Chip ea ESP32-P4 e na le processor ea dual-core 400 MHz RISC-V mme e tšehetsa ho fihla ho 32 MB PSRAM. Ntle le moo, ESP32-P4 e ts'ehetsa litlhaloso tsa USB 2.0, MIPI-CSI/DSI, H264 Encoder, le lisebelisoa tse ling tse fapaneng.
Ka likarolo tsohle tsa eona tse hlahelletseng, boto ke khetho e nepahetseng bakeng sa ho hlahisa lihlahisoa tsa li-audio le livideo tse theko e tlaase, tse phahameng, tse nang le matla a tlaase a marang-rang.
Mojule oa 2.4 GHz Wi-Fi 6 & Bluetooth 5 (LE) ESP32-C6-MINI-1 o sebetsa e le mojule oa Wi-Fi le Bluetooth oa boto. Boto e boetse e kenyelletsa skrine ea 7-inch capacitive touch screen e nang le qeto ea 1024 x 600 le kh'amera ea 2MP e nang le MPI CSI, e ntlafatsang boiphihlelo ba tšebelisano ea mosebelisi. Boto ea nts'etsopele e loketse ho hlahisa lihlahisoa tse ngata tse fapaneng, ho kenyeletsoa litloloko tsa mamati tse bonoang, lik'hamera tsa marang-rang, li-smart home central control skrini, theko ea elektroniki ea LCD. tags, li-dashboard tsa makoloi a mabeli, joalo-joalo.
Bongata ba lithakhisa tsa I/O li robehile lihloohong tsa phini hore li hokahane habonolo. Bahlahisi ba ka hokela li-peripherals ka lithapo tsa jumper.
Tokomane e na le likarolo tse latelang tse kholo:
- Ho qala: Ho fetaview ea ESP32-P4-Function-EV-Board le litaelo tsa ho seta ha hardware/software ho qala.
- Hardware Reference: Lintlha tse felletseng mabapi le Hardware ea ESP32-P4-Function-EV-Board.
- Lintlha tsa Tokiso ea Hardware: Nalane ea ntlafatso, litaba tse tsebahalang, le likhokahano tsa litataiso tsa basebelisi bakeng sa liphetolelo tse fetileng (haeba li teng) tsa ESP32-P4-Function-EV-Board.
- Litokomane Tse Amanang: Lihokelo tsa litokomane tse amanang.
Rea qala
Karolo ena e fana ka kenyelletso e khuts'oane ea ESP32-P4-Function-EV-Board, litaelo tsa mokhoa oa ho etsa setup sa pele sa hardware le mokhoa oa ho khantša firmware ho eona.
Tlhaloso ea Likarolo
Likarolo tsa bohlokoa tsa boto li hlalositsoe ka tsela ea oache.
| Karolo ea Bohlokoa | Tlhaloso |
| J1 | Lithapa tsohle tse teng tsa GPIO li robiloe ho blocker ea J1 bakeng sa ho hokahana habonolo. Bakeng sa lintlha tse ling, bona Header Block. |
| ESP32-C6 Module Programming Connector | Sehokelo se ka sebelisoa le ESP-Prog kapa lisebelisoa tse ling tsa UART ho khantša firmware mojuleng oa ESP32-C6. |
| Karolo ea Bohlokoa | Tlhaloso |
| ESP32-C6-MINI-1 Module | Mojule ona o sebetsa e le mojule oa puisano oa Wi-Fi le Bluetooth bakeng sa boto. |
| Microphone | Maekerofounu ea ka har'a sekepe e hokahaneng le sebopeho sa Audio Codec Chip. |
| Seta Botjha Konopo | E tsosolosa boto. |
| Audio Codec Chip | ES8311 ke "mono audio codec chip" e nang le matla a tlase. E kenyelletsa mocha o le mong oa ADC, mocha o le mong oa DAC, lerata la pele le lerata le tlase.amplifier, mokhanni oa li-headphone, melumo ea molumo oa dijithale, ho kopanya analog, le ho fumana mesebetsi. E hokahana le chip ea ESP32-P4 holim'a libese tsa I2S le I2C ho fana ka ts'ebetso ea audio ea hardware ntle le ts'ebeliso ea molumo. |
| Sebui sa Output Port | Kou ena e sebelisetsoa ho hokahanya sebuela-hōle. Matla a phahameng a hlahisoang a ka khanna 4 Ω, 3 W sebui. Sebaka sa phini ke 2.00 mm (0.08"). |
| Audio PA Chip | NS4150B e lumellana le EMI, 3 W mono Class D matla a molumo amphlakisa seo ampe matlafatsa matshwao a medumo ho tswa ho audio codec chip ho kganna dibui. |
| 5 V ho 3.3 V LDO | Selaoli sa matla se fetolang phepelo ea 5 V ho phallo ea 3.3 V. |
| Konopo ea BOOT | Konopo ea ho laola mokhoa oa ho qalisa. Tobetsa ea Seta Botjha Konopo ha u ntse u tšoere fatše Konopo ea Boot ho seta bocha ESP32-P4 le ho kenya mokhoa oa ho jarolla firmware. Firmware e ka khoasolloa ho SPI flash ka USB-to-UART Port. |
| Ethernet PHY IC | Ethernet PHY chip e hokahantsoeng le sebopeho sa ESP32-P4 EMAC RMII le RJ45 Ethernet Port. |
| Buck Converter | Mofetoleli oa DC-DC bakeng sa phepelo ea motlakase ea 3.3 V. |
| USB-to-UART Bridge Chip | CP2102N ke chip e le 'ngoe ea borokho ea USB-to-UART e hokahantsoeng le sebopeho sa ESP32-P4 UART0, CHIP_PU, le GPIO35 (phini ea likhoele). E fana ka litefiso tsa phetisetso ho fihla ho 3 Mbps bakeng sa ho khoasolla firmware le ho lokisa liphoso, e ts'ehetsa ts'ebetso ea jarolla ka ho iketsa. |
| 5 V LED e nang le matla a motlakase | LED ena e khantša ha boto e tsamaisoa ka koung efe kapa efe ea USB Type-C. |
| RJ45 Ethernet Port | Ethernet Port e tšehetsang 10/100 Mbps e ikamahanyang le maemo. |
| USB-to-UART Port | Boema-kepe ba USB Type-C bo ka sebelisoa ho matlafatsa boto, firmware ea flash ho chip, le ho buisana le chip ea ESP32-P4 ka USB-to-UART Bridge Chip. |
| USB Power-in Port | Boema-kepe ba USB Type-C bo sebelisetsoang ho matlafatsa boto. |
| USB 2.0 Type-C Port | Boema-kepe ba USB 2.0 Type-C bo hoketsoe ho interface ea USB 2.0 OTG High-Speed ea ESP32-P4, e tsamaellanang le litlhaloso tsa USB 2.0. Ha o buisana le lisebelisoa tse ling ka boema-kepe bona, ESP32-P4 e sebetsa joalo ka sesebelisoa sa USB se hokelang moamoheli oa USB. Ka kopo hlokomela hore Boema-kepe ba Mofuta oa C ba USB 2.0 le Boema-kepe ba Mofuta oa USB ba USB 2.0 bo ke ke ba sebelisoa ka nako e le 'ngoe. USB 2.0 Type-C Port le eona e ka sebelisoa bakeng sa ho matlafatsa boto. |
| Mofuta oa A-USB 2.0 | Boema-kepe ba USB 2.0 Mofuta oa A bo hoketsoe ho interface ea USB 2.0 OTG High-Speed ea ESP32-P4, e tsamaellanang le litlhaloso tsa USB 2.0. Ha o buisana le lisebelisoa tse ling ka boema-kepe bona, ESP32-P4 e sebetsa joalo ka moamoheli oa USB, e fana ka ho fihla ho 500 mA ea hajoale. Ka kopo hlokomela hore Boema-kepe ba Mofuta oa C ba USB 2.0 le Boema-kepe ba Mofuta oa USB ba USB 2.0 bo ke ke ba sebelisoa ka nako e le 'ngoe. |
| Phetoho ea Matla | Phetoho ea ho tima / ho tima. Ho fetohela ho lets'oao la ON ho matlafatsa boto ho (5 V), ho suthela hole le lets'oao la ON ho tima boto. |
| Fetoha | TPS2051C ke sesebelisoa sa motlakase sa USB se fanang ka moeli oa hona joale oa 500 mA. |
| MIPI CSI Connector | Sehokedi sa FPC 1.0K-GT-15PB se sebediswa bakeng sa ho hokela dimojule tsa khamera tse kantle ho etsa hore setshwantsho se fetisoe. Bakeng sa lintlha, ka kopo sheba litlhaloso tsa 1.0K-GT- 15PB ho Litokomane Tse Amanang. Litlhaloso tsa FPC: 1.0 mm pitch, 0.7 mm pin bophara, 0.3 mm botenya, 15 pini. |
| Karolo ea Bohlokoa | Tlhaloso |
| Buck Converter | Mofetoleli oa DC-DC bakeng sa phepelo ea motlakase ea VDD_HP ea ESP32-P4. |
| ESP32-P4 | MCU ea ts'ebetso e phahameng e nang le mohopolo o moholo oa kahare le bokhoni bo matla ba ho sebetsana le litšoantšo le lentsoe. |
| 40 MHz XTAL | Oscillator ea kristale e nepahetseng ea 40 MHz e sebetsang e le oache bakeng sa sistimi. |
| 32.768 kHz XTAL | Oscillator ea kristale e nepahetseng ea 32.768 kHz e sebetsang e le oache e nang le matla a tlase ha chip e le maemong a boroko bo tebileng. |
| MIPI DSI Connector | Sehokedi sa FPC 1.0K-GT-15PB se sebediswa bakeng sa ho hokela dipontsho. Bakeng sa lintlha, ka kopo sheba Tlhaloso ea 1.0K-GT-15PB Litokomaneng Tse Amanang. Litlhaloso tsa FPC: 1.0 mm pitch, 0.7 mm pin bophara, 0.3 mm botenya, 15 pini. |
| SPI flash | Flash ea 16 MB e hokahantsoe le chip ka sebopeho sa SPI. |
| Khadi ea MicroSD Slot | Boto ea nts'etsopele e ts'ehetsa karete ea MicroSD ka mokhoa oa 4-bit mme e khona ho boloka kapa ho bapala molumo files ho tsoa ho karete ea MicroSD. |
Lisebelisoa
Ka boikhethelo, lisebelisoa tse latelang li kenyellelitsoe ka har'a sephutheloana:
- LCD le lisebelisoa tsa eona (ho ikhethela)
- 7-inch capacitive touch screen e nang le qeto ea 1024 x 600
- LCD adaptara board
- Mokotla oa lisebelisoa, ho kenyeletsoa lithapo tsa DuPont, thapo ea ribone ea LCD, li-standoffs tse telele (20 mm ka bolelele), le li-standoffs tse khutšoane (8 mm ka bolelele)
- Khamera le lisebelisoa tsa eona (ka boikhethelo)
- Khamera ea 2MP e nang le MIPI CSI
- Boto ea adaptara ea khamera
- Mohala oa lente bakeng sa khamera
Hlokomela
Ka kopo hlokomela hore thapo ea lente e lebisang pele, eo likhoele tsa eona lipheletsong tse peli li leng ka lehlakoreng le le leng, li lokela ho sebelisoa bakeng sa khamera; thapo ea lente e ka lehlakoreng le ka morao, eo likhoele tsa eona lipheletsong tse peli li leng ka mahlakoreng a fapaneng, li lokela ho sebelisoa bakeng sa LCD.
Qala Ntlafatso ea Kopo
Pele o matlafatsa ESP32-P4-Function-EV-Board ea hau, ka kopo etsa bonnete ba hore e maemong a matle ha ho na matšoao a hlakileng a tšenyo.
Hlokahala Hardware
- ESP32-P4-Function-EV-Boto
- Lithapo tsa USB
- Khomphutha e sebelisang Windows, Linux, kapa macOS
Hlokomela
Etsa bonnete ba hore o sebelisa thapo ea boleng bo botle ea USB. Lithapo tse ling ke tsa ho tjhaja feela 'me ha li fane ka lithapo tse hlokahalang tsa data kapa hona ho sebetsa bakeng sa ho hlophisa liboto.
Hardware ea boikhethelo
- Karete ea MicroSD
Ho hlophisoa ha Hardware
Hokela ESP32-P4-Function-EV-Board komporong ea hau u sebelisa thapo ea USB. Boto e ka tsamaisoa ka boema-kepe bofe kapa bofe ba USB Type-C. USB-to-UART Port e buelloa bakeng sa firmware e khanyang le ho lokisa liphoso.
Ho hokela LCD, latela mehato ena:
- Sireletsa boto ea nts'etsopele ho boto ea adaptara ea LCD ka ho hokela li-standoffs tse khutšoane tsa koporo (bolelele ba limilimithara tse 8) ho lipalo tse 'ne tse emeng bohareng ba boto ea adaptara ea LCD.
- Hokela hlooho ea J3 ea boto ea adaptara ea LCD ho sehokelo sa MIPI DSI ho ESP32-P4 Function-EV-Board u sebelisa thapo ea ribone ea LCD (lehlakoreng le ka morao). Hlokomela hore LCD adapter board e se e hokahane le LCD.
- Sebelisa mohala oa DuPont ho hokahanya phini ea RST_LCD ea hlooho ea J6 ea boto ea adaptara ea LCD ho GPIO27 pin ea hlooho ea J1 ho ESP32-P4-Function-EV-Board. Pini ea RST_LCD e ka hlophisoa ka software, 'me GPIO27 e behiloe joalo ka ea kamehla.
- Sebelisa mohala oa DuPont ho hokahanya phini ea PWM ea hlooho ea J6 ea boto ea adaptara ea LCD ho GPIO26 pin ea hlooho ea J1 ho ESP32-P4-Function-EV-Board. Pini ea PWM e ka hlophisoa ka software, 'me GPIO26 e behiloe joalo ka ea kamehla.
- Ho khothalletsoa ho matlafatsa LCD ka ho hokela thapo ea USB hloohong ea J1 ea boto ea adaptara ea LCD. Haeba sena se sa khonehe, hokela lithakhisa tsa 5V le GND tsa boto ea adaptara ea LCD ho lithakhisa tse tsamaellanang ho hlooho ea J1 ea ESP32-P4-Function-EV-Board, ha feela boto ea nts'etsopele e na le matla a lekaneng.
- Hokela litšiea tse telele tsa koporo (20 limilimithara ka bolelele) litsing tse 'ne tse emeng haufi le boto ea adaptara ea LCD ho lumella LCD ho ema e otlolohile.
Ka kakaretso, boto ea adaptara ea LCD le ESP32-P4-Function-EV-Board li hokahane ka likhoele tse latelang:
| LCD Adapter Board | ESP32-P4-Function-EV |
| J3 hlooho | MIPI DSI sehokelo |
| RST_LCD phini ea hlooho ea J6 | GPIO27 pin ea hlooho ea J1 |
| PWM pin ea hlooho ea J6 | GPIO26 pin ea hlooho ea J1 |
| 5V pin ea hlooho ea J6 | 5V pin ea hlooho ea J1 |
| GND pin ea hlooho ea J6 | GND pin ea hlooho ea J1 |
Hlokomela
Haeba u matlafatsa boto ea adaptara ea LCD ka ho hokela thapo ea USB hloohong ea eona ea J1, ha ho hlokahale hore u hokele lithakhisa tsa eona tsa 5V le GND ho lithakhisa tse tsamaellanang letlapeng la nts'etsopele.
Ho sebelisa khamera, hokela boto ea adaptara ea khamera ho sehokedi sa MIPI CSI botong ya ntshetsopele o sebedisa thapo ya ribone ya khamera (ho ya pele).
Setup ea Software
Ho theha tikoloho ea hau ea nts'etsopele le ho khantša app exampka lebokoseng la hau, ka kopo latela litaelo ho ESP-IDF Qala.
U ka fumana examples bakeng sa ESP32-P4-Function-EV ka ho fihlella Examples . Ho lokisa likhetho tsa projeke, kenya idf.py menuconfig ho example directory.
Hardware Reference
Setšoantšo se Thibeloang
Setšoantšo sa block se ka tlase se bontša likarolo tsa ESP32-P4-Function-EV-Board le li-interconnections tsa tsona.
Likhetho tsa Phepelo ea Matla
Matla a ka fanoa ka efe kapa efe ea likou tse latelang:
- USB 2.0 Type-C Port
- USB Power-in Port
- USB-to-UART Port
Haeba thapo ya USB e sebedisetswang ho lokisa bothata e sa kgone ho fana ka hona jwale e lekaneng, o ka hokela boto ho adaptara ya motlakase ka boemakepe bofe kapa bofe bo fumanehang ba USB Type-C.
Thibelo ea Hlooho
Litafole tse ka tlase li fana ka Lebitso le Mosebetsi oa hlooho ea phini J1 ea boto. Mabitso a lihlooho tsa phini a bontšoa ho Setšoantšo sa ESP32-P4-Function-EV-Board - ka pele (tobetsa ho holisa). Linomoro li tšoana le tsa ESP32-P4-Function-EV-Board Schematic.
| Che. | Lebitso | Mofuta 1 | Mosebetsi |
| 1 | 3V3 | P | 3.3 V phepelo ea motlakase |
| 2 | 5V | P | 5 V phepelo ea motlakase |
| 3 | 7 | I/O/T | GPIO7 |
| 4 | 5V | P | 5 V phepelo ea motlakase |
| 5 | 8 | I/O/T | GPIO8 |
| Che. | Lebitso | Mofuta | Mosebetsi |
| 6 | GND | GND | Fatše |
| 7 | 23 | I/O/T | GPIO23 |
| 8 | 37 | I/O/T | U0TXD, GPIO37 |
| 9 | GND | GND | Fatše |
| 10 | 38 | I/O/T | U0RXD, GPIO38 |
| 11 | 21 | I/O/T | GPIO21 |
| 12 | 22 | I/O/T | GPIO22 |
| 13 | 20 | I/O/T | GPIO20 |
| 14 | GND | GND | Fatše |
| 15 | 6 | I/O/T | GPIO6 |
| 16 | 5 | I/O/T | GPIO5 |
| 17 | 3V3 | P | 3.3 V phepelo ea motlakase |
| 18 | 4 | I/O/T | GPIO4 |
| 19 | 3 | I/O/T | GPIO3 |
| 20 | GND | GND | Fatše |
| 21 | 2 | I/O/T | GPIO2 |
| 22 | NC(1) | I/O/T | GPIO1 2 |
| 23 | NC(0) | I/O/T | GPIO0 2 |
| 24 | 36 | I/O/T | GPIO36 |
| 25 | GND | GND | Fatše |
| 26 | 32 | I/O/T | GPIO32 |
| 27 | 24 | I/O/T | GPIO24 |
| 28 | 25 | I/O/T | GPIO25 |
| 29 | 33 | I/O/T | GPIO33 |
| 30 | GND | GND | Fatše |
| 31 | 26 | I/O/T | GPIO26 |
| 32 | 54 | I/O/T | GPIO54 |
| 33 | 48 | I/O/T | GPIO48 |
| 34 | GND | GND | Fatše |
| 35 | 53 | I/O/T | GPIO53 |
| 36 | 46 | I/O/T | GPIO46 |
| 37 | 47 | I/O/T | GPIO47 |
| 38 | 27 | I/O/T | GPIO27 |
| 39 | GND | GND | Fatše |
| Che. | Lebitso | Mofuta | Mosebetsi |
| 40 | NC(45) | I/O/T | GPIO45 3 |
P: Phepelo ea matla; I: Kenyeletso; O: Sephetho; T: Boipheliso bo phahameng.
[2] (1,2):
GPIO0 le GPIO1 li ka sebelisoa ka ho tima ts'ebetso ea XTAL_32K, e ka finyelloang ka ho tsamaisa R61 le R59 ho ea ho R199 le R197, ka ho latellana.
[3] :
GPIO45 e ka sebelisoa ka ho tima tšebetso ea SD_PWRn, e ka finyelloang ka ho tsamaisa R231 ho ea ho R100.
Lintlha tsa ntlafatso ea Hardware
Ha ho liphetolelo tse fetileng tse fumanehang.
ESP32-P4-Function-EV-Board Schematic (PDF)
Moralo oa PCB oa ESP32-P4-Function-EV-Board (PDF)
ESP32-P4-Function-EV-Boto Ditekanyo (PDF)
Mohloli oa litekanyo tsa ESP32-P4-Function-EV-Board file (DXF) - U ka khona view eona le Autodesk Viewer inthaneteng
Tlhaloso ea 1.0K-GT-15PB (PDF)
Lethathamo la khamera (PDF)
Hlahisa leqephe la boitsebiso (PDF)
Lethathamo la lintlha tsa chip EK73217BCGA (PDF)
Lethathamo la lintlha tsa chip EK79007AD (PDF)
LCD Adapter Board Schematic (PDF)
LCD Adapter Board PCB Layout (PDF)
Sekema sa Boto ea Adapter ea Khamera (PDF)
Sebopeho sa Boto ea Adapter ea Khamera PCB (PDF)
Bakeng sa litokomane tse ling tsa moralo oa boto, ka kopo ikopanye le rona atsales@espressif.com.
⇐ E Fetileng E Latelang ⇒
© Copyright 2016 - 2024, Espressif Systems (Shanghai) CO., LTD.
E hahiloeng ka Sphinx sebelisa a tema e thehiloeng ho Bala the Docs Sphinx Theme.
Litokomane / Lisebelisoa
 |
Espressif ESP32 P4 Mosebetsi oa EV Board [pdf] Buka ea Mong'a ESP32-P4, ESP32 P4 Mosebetsi oa EV Board, ESP32, P4 Mosebetsi oa EV Board, Mosebetsi oa EV Board, EV Board, Board |