EBYTE E18 Series ZigBee3.0 Wireless Module User Manual

Selelekela

Kenyelletso e Khutšoanyane

E18 series ke 2.4GHz frequency band ZigBee communication protocol-to-serial wireless module e entsoeng le ho hlahisoa ke Ebyte. Fektheri e tla le firmware ea marang-rang e ikemetseng, e itokiselitse ho sebelisoa, e loketseng maemo a fapaneng a kopo (haholo-holo ntlo e bohlale). Mojule oa letoto la E18 o amohela CC2530 RF chip e tsoang kantle ho naha ho tsoa Texas Instruments. Chip e kopanya 8051single-chip microcomputer le transceiver e se nang mohala. Mefuta e meng ea li-module e na le matla a PA a hahelletsoeng ka hare ampho eketsa sebaka sa puisano. Firmware e hahiloeng fekthering e sebelisa phetiso e pepeneneng ea data e thehiloeng ho protocol ea ZigBee3.0, mme e ts'ehetsa litaelo tse fapaneng tlasa protocol ea ZigBee3.0. Kamora tekanyo ea 'nete, e lumellana hantle haholo le lihlahisoa tse ngata tsa ZigBee3.0 'marakeng.

ZigBee 3.0 Advantages

Firmware ea module ea E18 e thehiloe ho protocol stack ea Z-Stack3.0.2 (ZigBee 3.0), e leng "protocol stack" e ntle ka ho fetisisa bakeng sa li-chips tsa CC2530/CC2538, kahoo k'hamphani ea rona e boetse e entse lintlafatso tse ngata motheong ona ho netefatsa ts'ebetso e tsitsitseng ea nako e telele. ea tsamaiso. Phapang lipakeng tsa ZigBee 3.0 le mofuta o fetileng:

1. Mokhoa oa marang-rang o fetohile: ZigBee 3.0 e thibetse mokhoa oa marang-rang hang ha matla a buloa, 'me marang-rang a etsoa ho latela litlhoko tsa sebele. Sesebelisoa leha e le sefe ha se na marang-rang sebakeng sa fektheri, mohokahanyi o hloka ho sebelisa "formation" (call bdb_ Start Commissioning(BDB_COMMISSIONING_MODE_NWK_FORMATION) ) ho theha marang-rang a macha, ebe o tsamaisa "Steering (call bdb_StartCommissioning (BDB_COMMISSIONING_MODE_NWK ho_STEERING), ) nako ea kamehla ea ho bula marang-rang ke metsotsoana ea 180, marang-rang a bulehileng a ka koaloa esale pele ka ho phatlalatsa "ZDP_MgmtPermitJoinReq". Nakong ea metsotsoana ena ea 180, li-routers kapa li-node tsa ho qetela li boetse li sebelisa "Steering" tot rigger onboarding. "Steering" e ka qalisoa ke konopo kapa sekepe sa serial. Mohokahanyi le lisebelisoa tse sa amaneng le marang-rang li hlahisoa ka nako e le 'ngoe,' me marang-rang a ka phethahala ha ho hlokahala.
2. Mokhoa o ntlafalitsoeng oa ts'ireletso oa senotlolo: Ka mor'a hore lisebelisoa tsa ZigBee 3.0 li kene ho mohokahanyi, mohokahanyi o tla hopola aterese ea MAC ea sesebelisoa ka seng ebe o ba fa senotlolo se arohaneng, e leng APS Key. Senotlolo sena sa APS se na le merero e latelang: ① Ha senotlolo se kopantsoeng sa mohokahanyi (ke hore, NWK Key) se lutsitsoe, senotlolo se ka nkeloa sebaka, 'me senotlolo ha se sa kengoa ke senotlolo se tsebahalang "ZigBeeAlliance09", empa se fanoe. ho sesebelisoa se seng le se seng sa phihlello ea marang-rang u sebelisa Senotlolo sa APS. ② Ha mohokahanyi a etsa ntlafatso ea OTA ho sesebelisoa sa marang-rang, a ka sebelisa Senotlolo sa APS ho koetlisa ntlafatso. file ho thibela ntlafatso file ho tloha ho ba tampered le. 3. Mokhoa oa tsamaiso ea marang-rang: ZigBee 3.0 e ntlafatsa mochine oa tsamaiso ea lisebelisoa. Pele ho tsohle, mohokahanyi a ka tseba hore lisebelisoa tsa marang-rang kaofela li kopanya le ho tsamaea, e le hore tsamaiso le taolo ea lisebelisoa tsa marang-rang li ka phethoa feela ka ho sebetsa ho mohokahanyi. 4. Tlhaloso e phethahetseng ea protocol ea ZCL: Ka ho phethahatsa protocol ea ZCL, mesebetsi ea lisebelisoa tsa ZigBee e feta modular. Tlhaloso ea ZCL e hlophisa mesebetsi e tšehetsoeng ke lisebelisoa tsa ZigBee, esita le mesebetsi ea botho e hlophisitsoeng ke sesebelisoa e ka fetisoa ka mokhoa oa data oa ZCL. Tlas'a ketso ea sebopeho sa data sa ZCL, mesebetsi e tšehetsoeng ke sesebelisoa sa ZigBee e ka eketsoa kapa ea fokotseha ka mokhoa o feto-fetohang, e leng ho qoba mathata a sa hlokahaleng a bakoang ke ho fetoloa ha sebopeho sa data se bakoang ke ho fetoloa ha mosebetsi oa hardware oa sesebelisoa sa ZigBee.

Likaroloana

• Ho fetola karolo: Mosebelisi a ka fetola sesebelisoa har'a mefuta e meraro ea mohokahanyi, router le terminal ka litaelo tsa serial.
• Khokahano ea marang-rang: Mohokahanyi o iketsetsa marang-rang ha a buletsoe, 'me li-terminal le li-routers li batla le ho kopanya marang-rang.
• Boipheliso ba marang-rang: haeba node e bohareng ea marang-rang e lahlehile, marang-rang a mang a ikopanya kapa a boloka marang-rang a pele (node ​​e arohaneng e ikamahanya le marang-rang a pele, 'me node e sa arohaneng e boloka marang-rang a pele); haeba mohokahanyi a lahlehile, ho na le li-node tse sa arohaneng marang-rang a pele, 'me mohokahanyi a ka tsosolosa marang-rang a pele. Mohokahanyi ea kenang marang-rang kapa netweke ea mantlha ea PAN ID e behiloeng ke mosebelisi a le mong o kenela marang-rang a mantlha.
• Ts'ebeliso ea matla a tlase haholo: Ha sesebelisoa se le maemong a ho qetela, se ka beoa mokhoeng oa matla a tlase, 'me nako ea ho robala ea sesebelisoa e ka fetoloa ho latela nako eo mosebelisi a e sebelisang. Boemong ba matla a tlase, tšebeliso ea matla a standby e ka tlase ho 2.5uA; U ka fumana melaetsa eo u lokelang ho e fumana ka nako e behiloeng ke
  mosebedisi.
• Tlhophiso ea nako ea ho boloka data: Ha sesebelisoa se le maemong a mohokahanyi le router, mosebelisi a ka ipehela nako ea ho boloka data a le mong, 'me a sebelisana le terminal ka mokhoa oa ho robala ho boloka data ea sesebelisoa sa terminal, le ho romella data ho terminal ka mor'a hore terminal e tsohe borokong. Theminale; boloka ho fihlela likotoana tse 4 tsa data, haeba e feta, data ea pele e tla hlakoloa ka bo eona, kamora hore nako ea ho boloka data e fete, qubu ea data e tla hlakoloa ka bo eona.
• Phetisetso e iketsang: Ka mokhoa oa ho batla (unicast), sesebelisoa se tla fetisetsa ka bohona ha se hloleha ho romella node e latelang, 'me palo ea phetisetso bakeng sa molaetsa ka mong ke makhetlo a 2.
• Mokhoa o ikemetseng: Mojule o ts'ehetsa ts'ebetso ea ho tsamaisa marang-rang; li-routers le bahokahanyi ba na le mesebetsi ea ho tsamaisa data ea marang-rang, 'me basebelisi ba ka etsa marang-rang a mangata.
• Protocol ea encryption: Mojule o amohela ts'ebetso ea AES 128-bit encryption, e ka fetolang encryption ea marang-rang le anti-monitoring; basebelisi ba ka fetola senotlolo sa marang-rang ka bobona, 'me lisebelisoa tse nang le senotlolo se tšoanang sa marang-rang li ka buisana ka mokhoa o tloaelehileng marang-rang.
• Tlhophiso ea boema-kepe ba serial: Mojule o na le litaelo tsa serial port tse hahelletsoeng. Basebelisi ba ka hlophisa (view) liparamente le mesebetsi ea module ka litaelo tsa serial port.
• Puisano ea data ea mefuta e mengata: ts'ehetsa lits'ebetso tsohle tsa marang-rang, li-multicast le tse hlokahalang (unicast);
  e boetse e ts'ehetsa mekhoa e mengata ea phetisetso ka har'a mokhoa oa khaso le o batloang (unicast).
• Phetoho ea mocha: Tšehetsa liphetoho tse 16 tsa liteishene (2405-2480MHZ) ho tloha 11 ho ea ho 26, le likanale tse fapaneng tse lumellanang le lihlopha tse fapaneng tsa maqhubu.
• Netweke PAN_ID e fetoha: Phetoho efe kapa efe ya netweke PAN_ID, basebelisi ba ka iketsetsa PAN_I hore ba kenele netweke e tsamaisanang kapa ba ikhethele PAN_ID hore o kenele netweke.
• Phetoho ea sekhahla sa serial port baud rate: Basebelisi ba ka ipehela sekhahla sa baud ka bo bona, ho fihla ho 115200, palo ea kamehla ea li-bits ke 8, thestopbit ke 1 bit, 'me ha ho na parity bit.
• Patlo e khuts'oane ea aterese: Basebelisi ba ka fumana aterese e khuts'oane e tsamaisanang le eona ho latela aterese ea MAC (e ikhethang, e tsitsitseng) ea mojule o kentsoeng marang-rang.
• Ho fetola sebopeho sa taelo: Mojule ona o ts'ehetsa mekhoa e 'meli ea taelo ea HEX le phetisetso e hlakileng, e ka hlophisoang le ho fetoloa habonolo ke basebelisi.
• Reset ea mojule: Mosebelisi a ka hlophisa mojule bocha ka litaelo tsa serial port.
• Sekhahla sa ho khutlisa senotlolo se le seng: Haeba mosebelisi a lebala kapa a sa tsebe sekhahla sa baud, ts'ebetso ena e ka sebelisoa ho khutlisetsa sekhahla sa "baud" sa kamehla ho 115200.
• Khutlisa litlhophiso tsa feme: Basebelisi ba ka khutlisetsa module ho litlhophiso tsa feme ka litaelo tsa serial port.
• E na le setifikeiti sa naha sa boqapi ba patent, 'me lebitso la eona la boqapi ke: mokhoa oa ho hokahana le ho sebelisana ha li-module tsa transparent transparent tse thehiloeng ho ZigBee3.0 Patent No.: ZL 2019 1 1122430. X
  

Lisebelisoa

• Li-sensor tse bohlale tsa lapeng le tsa indasteri, joalo-joalo;
• Sistimi ea ts'ireletso, sistimi ea ho beha maemo;
• Taolo e hole e se nang mohala, drone;
• Taolo e hole ea papali e se nang mohala;
• Lihlahisoa tsa tlhokomelo ea bophelo;
• lentsoe le se nang mohala, li-headset tsa waelese;
• Lisebelisoa tsa indasteri ea likoloi.

Ga tlhaloso le paramethara

Paramethara e kholo

Main Parameter s	Yuniti	Mohlala			Ela hloko
		E18-MS1-PCB E18-MS1-IPX	E18-MS1PA2-PCB E18-MS1PA2-IPX	E18-2G4Z27SP E18-2G4Z27SI
Khafetsa ea ho sebetsa	GHz	2.400 ~ 2.480			Tšehetsa sehlopha sa ISM
Fetisetsa matla	dBm	4.0±0.5	20.0±0.5	27.0±0.5
Ho thibela matla	dBm	0 ~ 10.0			Monyetla oa ho chesa sebakeng se haufi o nyane
Amohela kutlo	dBm	-96.5±1.0	-98.0±1.0	-99.0±1.0	Sekhahla sa moea ke 250kbps
Impedans e tsamaellanang	Ω	50			Tšitiso e lekanang ea PCB ka har'a board antennaIPEX-1 antenna e tsamaisanang le impedance
Bonyane bolelele ba pakete	byte	4
Bohole bo lekantsoeng	m	200	600	800	E hlakile ebile e bulehile, bophahamo ba limithara tse 2.5, lebelo la moea 250kBps. Hlokomela 1
Tlhokomeliso 1: Phaello ea antenna ea PCB ka board ke -0.5dBi; sebopeho sa IPEX-1 se hokahane le antenna e nang le phaello ea 3dBi, 'me sebaka sa puisano se eketsoa ka hoo e ka bang 20% ​​~ 30%.

Litekanyetso tsa motlakase

Litekanyetso tsa motlakase	Yuniti	Mohlala			Ela hloko
		E18-MS1-PCB E18-MS1-IPX	E18-MS1PA2-PCB E18-MS1PA2-IPX	E18-2G4Z27SP E18-2G4Z27SI
Tshebetso Voltage	V	2.0 ~ 3.6		2.5 ~ 3.6	≥3.3V e ka netefatsa matla a tsoang
Buisana boemong ba thini	V	3.3			Kotsi ea ho khathala ka 5V TTL
Emission hajoale	mA	28	168	500	Tšebeliso ea matla hang-hang
Fumana hona joale	mA	27	36	36

Ho robala hona joale	uA	1.2	1.2	2.5	Ho tima software
Mocheso oa ho sebetsa	℃	-40 ~ +85			Boemo ba indasteri
Mocheso oa polokelo	℃	-40 ~ +125			Boemo ba indasteri

Lisebelisoa tsa lisebelisoa

Mekhahlelo e ka sehloohong	E18-MS1-PCB	E18-MS1-IPX	E18-MS1PA2-PCB E18-2G4Z27SP	E18-MS1PA2-IPX E18-2G4Z27SI	Ela hloko
Litekanyo	14.1*23.0mm	14.1*20.8mm	16.0*27.0mm	16.0*22.5mm
IC Lebitso le felletseng	CC2530F256RHAT/QFN40				Firmware e hahelletsoeng ka feme, e ts'ehetsa nts'etsopele ea bobeli
LEHLANYA	256 KB
RAM	8 KB
Ts'ehetso ea protocol	ZigBee 3.0
Sehokelo sa Puisano	UART				Boemo ba TTL
Sebopeho sa I / O	Boema-kepe bohle ba I/O bo tsoa				Ho loketse hore basebelisi ba ntlafatse boemo ba bobeli.
Mokhoa oa ho paka	SMD, Stamp lesoba, sekontiri se 1.27mm				Lithako tsa sephutheloana sa PCB lia tšoana, 'me mokhoa o mong le o mong o ka nkeloa sebaka ke o mong.
PA+LNA	x	x	√	√	PA+LNA e hahiloeng ka module
Khokahano ea lenakana	Antenna ea PCB	IPEX-1	PCB天线	IPEX-1

Li-parameter tsa tsamaiso ea marang-rang

Mekhoa ea tsamaiso	Boleng ba paramethara	Tlhaloso
Kakaretso ea lisebelisoa tsa marang-rang	≤32	boleng bo sisintsweng;
Tsamaiso ea tsamaiso ea marang-rang	5 mekhahlelo	Boleng bo tsitsitseng ba sistimi;
Palo ea lintlha tse amanang le marang-rang	≤7	boleng bo khothalelitsoeng;Node tse 7 li romella data ka nako e le ngoe, node ka 'ngoe e romella li-byte tsa 30 ntle le tahlehelo ea pakete;
Boholo ba palo ea lisebelisoa tsa bana tse hoketsoeng sesebelisoa sa motsoali	10	Boleng bo tsitsitseng ba sistimi;
Bolelele ba nako eo sesebelisoa sa motsoali se bolokang lintlha tsa sesebelisoa sa ngoana se sa sebetseng.	7s	Boleng bo tsitsitseng ba sistimi;
Sesebediswa sa motswadi se boloka palo e kahodimodimo ya data ya theminale e sa sebetseng le disebediswa tsa bana	15	Boleng bo tsitsitseng ba sistimi; irst in first out molao-motheo;
Sesebediswa sa motswadi se boloka palo e kahodimodimo ya data ya theminale e sa sebetseng le sesebediswa sa ngwana	4	Boleng bo tsitsitseng ba sistimi; Pele ho molao-motheo oa pele;
Nako ea ho tsoha e sa sebetseng Ho khetha (nako le nako ho tsoha).	≤7s	Boleng bo tsitsitseng ba sistimi; ho lata lintlha tsa nakoana ho sesebelisoa sa motsoali ka mor'a hore nako le nako ho tsohe, 'me nako e atisa ho ba ka tlase ho "sesebelisoa sa motsoali se boloka boitsebiso ba sesebelisoa se senyenyane sa theminale";
Nako ea khaso marang-rang	≥200ms	Boleng bo khothalelitsoeng ho qoba lifefo tsa marang-rang ka katleho;
Palo ea li-retransmissions ka mor'a hore phetiso ea lintlha tse tsitsitseng (ka-tlhoko) e hlolehe	makhetlo a 2	ha e kenyeletse phetiso ea pele; Haeba ho se na maikutlo a amoheloang ka motsotsoana oa 6 ka mor'a phetisetso ea pele, romela hape, haeba maikutlo a sa amoheloe ka motsotsoana oa 12, romela hape, ho fihlela motsotsong oa 18, ha ho na maikutlo a amoheloang, 'me phetisetso e ikemiselitse. hloleha;
Maikutlo a nako ea data	≤5s	Ka kakaretso, lintlha tsa maikutlo li ka amoheloa nakong ea metsotsoana ea 5, 'me haeba ho se na maikutlo a amoheloang ka metsotsoana ea 5, ho ka etsoa qeto ea hore phetisetso e hlōleha;

Boholo le phini tlhaloso

Nomoro ea phini	CC2530Pin lebitso	Lebitso la Module Pin	Keletso / Ketso	Tšebeliso ea pin
1	GND	GND		Mohala o ka tlaase, o hoketsoeng sebakeng sa litšupiso tsa matla
2	VCC	VCC		Phepelo ea motlakase, e tlameha ho ba lipakeng tsa 1.8 ~ 3.6V
3	P2.2	GPIO	I/O	DC-download program kapa Debug clock interface
4	P2.1	GPIO	I/O	DD-khoasolla lenaneo kapa Debug data interface
5	P2.0	GPIO	I/O	N/C
6	P1.7	NWK_KEY	I	E sebelisoa bakeng sa ho kopanya ka letsoho, ho tsoa, ​​le linotlolo tsa ho bapisa kapele.Ha e na marang-rang: Tobetsa nakoana ho kena marang-rang kapa ho etsa tšebetso ea netweke;Netweke: Tobetsa nako e khuts'oane bakeng sa papali e potlakileng;Tobetsa nako e telele e bolela ho siea marang-rang a hajoale;Hlokomela: Boemo bo tlase bo nepahetse. , 100ms ≤ tobetsa e khutšoanyane ≤ 3000ms, 5000 ≤ khatiso e telele.
7	P1.6	GPIO	I/O	N/C
8	NC	NC		N/C
9	NC	NC		N/C
10	P1.5	UART0_TX	I	serial port TX pin
11	P1.4	UART0_RX	O	Pin ea serial port RX
12	P1.3	RUN_LED	O	E sebelisoa ho bontša boemo ba phihlello ea marang-rang ea mojule. Ho khantša ka potlako linako tsa 256 (maqhubu a 10Hz) ho bontša hore e kopanya marang-rang kapa ho theha marang-rang, 'me butle-butle ho khantša ka makhetlo a 12 (maqhubu a 2Hz) ho bontša hore module e kene marang-rang kapa e atlehile ho theha marang-rang; Boemo bo tlaase bo khantša;
13	P1.2	NWK_LED	O	E sebelisoa ho bonts'a boemo bo le bong ba bohlokoa ba mojule,
				hafeela li-module tse peli li hloka ho ikopanya le mohokahanyi a le mong, ebe ho ka etsoa pairing e le 'ngoe ea bohlokoa. Ka mokhoa o bonaletsang, phetiso e pepeneneng ka bobeli e ka etsoa.Lebone la boemo bo tlase;
14	P1.1	GPIO	I/O	Pin ea taolo ea PA e hokahane ka har'a mojule; Ha ho na PA ka hare ho E18-MS1-PCB/E18-MS1-IPX;
15	P1.0	GPIO	I/O	The PA e amohelang pini ea taolo e hokahane ka hare ho module; Ha ho na PA ka hare ho E18-MS1-PCB/E18-MS1-IPX;
16	P0.7	HGM	O	HGM pin ea PA;E18-MS1-PCB/E18-MS1-IPX ha e na PA ka hare, kahoo pin ena e sebelisoa e le GPIO port;
17	P0.6	GPIO	I/O	N/C
18	P0.5	GPIO	I/O	N/C
19	P0.4	GPIO	I/O	N/C
20	P0.3	GPIO	I/O	N/C
21	P0.2	GPIO	I/O	N/C
22	P0.1	GPIO	I/O	N/C
23	P0.0	GPIO	I/O	N/C
24	RETS'ELISITSOE	RETS'ELISITSOE	I	Khutlisa boema-kepeng

Moqapi oa lisebelisoa

• Ho kgothaletswa ho sebelisa motlakase o laoloang ke DC ho fana ka matla ho module, coefficient ea ripple ea phepelo ea motlakase e lokela ho ba e nyenyane ka hohle kamoo ho ka khonehang, 'me mochine o lokela ho thehoa ka botšepehi;
• Ka kopo ela hloko khokahanyo e nepahetseng ea lipalo tse ntle le tse mpe tsa phepelo ea motlakase, joalo ka khokahanyo e ka morao e ka bakang tšenyo ea mojule;
• Ka kopo, hlahloba phepelo ea motlakase ho netefatsa hore e lipakeng tsa matla a khothaletsoangtages. Haeba e feta boleng bo phahameng, mojule o tla senyeha ka ho sa feleng;
• Ka kopo, hlahloba botsitso ba phepelo ea motlakase, voltage ha ea lokela ho feto-fetoha hangata le hangata;
• Ha ho etsoa potoloho ea motlakase bakeng sa module, hangata ho kgothaletswa ho boloka ho feta 30% ea margin, e le hore mochine oohle o ka sebetsa ka mokhoa o tsitsitseng ka nako e telele;
• Mojule o lokela ho bolokoa hole kamoo ho ka khonehang ho tloha phepelong ea motlakase, transformer, wiring ea maqhubu a phahameng le likarolo tse ling tse nang le tšitiso e kholo ea motlakase;
• Mesaletsa ea dijithale ea maqhubu a holimo, mesaletsa ea analoge ea maqhubu a holimo, le mesaletsa ea matla e tlameha ho qoba bokatlase ba mojule. Haeba ho hlokahala ho feta tlas'a mojule, ho nka hore mojule o rekisitsoe ho Top Layer, koporo ea fatše (koporo eohle) e behiloe ho Top Layer ea karolo ea ho kopana ea module. 'Me e thehiloe hantle), e tlameha ho ba haufi le karolo ea dijithale ea mojule le ho tsamaisoa ka Lera e ka Tlase;
• Ho nka hore mojule o rekisoa kapa o behiloe ho Top Layer, ho boetse ho fosahetse ho sebelisa lithapo tsa litsela ka mokhoa o sa tsitsang ka Lera le ka Tlase kapa likarolo tse ling, tse tla ama ho kheloha le ho amohela kutloisiso ea mojule ho ea ho likhato tse sa tšoaneng;
• Ho nka hore ho na le lisebelisoa tse nang le tšitiso e kholo ea motlakase ho potoloha mojule, e tla ama ts'ebetso ea module haholo. Ho kgothaletswa ho dula hole le mojulu ho ya ka matla a tshitiso. Haeba boemo bo lumela, ho itšehla thajana ho loketseng le ho sireletsa li ka etsoa;
• Ho nka hore ho na le mesaletsa e nang le tšitiso e kholo ea motlakase ho potoloha mojule (high frequency digital, high-frequency analog, power traces), tshebetso ea module le eona e tla ameha haholo. Ho kgothaletswa ho dula hole le mojulu ho ya ka matla a tshitiso. Ho itšehla thajana ho loketseng le ho sireletsa;
• Haeba mohala oa puisano o sebelisa boemo ba 5V, mohanyetsi oa 1k-5.1k o tlameha ho kopanngoa ka letoto (ha o khothalletsoe, ho ntse ho e-na le kotsi ea tšenyo);
• Leka ho lula hole le liprothokholo tsa TTL tseo 'mele oa tsona e leng 2.4GHz, mohlalaampmohlala: USB3.0;
• Sebopeho sa ho kenya li-antenna se na le tšusumetso e kholo ts'ebetsong ea module. Etsa bonnete ba hore theantenna e pepesitsoe mme ka ho khetheha e nyolohe holimo; ha module e kenngoa ka hare ho nyeoe, ho ka sebelisoa cable ea boleng bo phahameng ba antenna ho atolosa antenna ka ntle ho nyeoe;
• Antenna ha ea lokela ho kenngoa ka har'a khetla ea tšepe, e tla fokotsa haholo sebaka sa phetisetso.

Moralo oa Software

• Sesebelisoa sa semmuso sa CC DEBUGGER sea hlokahala bakeng sa ho etsa mananeo kapa ho Debugging (tobetsa ho view sehokelo sa ho reka). Setšoantšo sa wiring se tjena.
  
• Matla a PA amptlhahisoleseding ea taolo ea lifier ka hare ho module, e sebetsang ho E18-MS1PA2-PCB/E18 MS1PA2- IPX/E18-2G4Z27SP/E18-2G4Z27SI.
• Lithako tsa P1.0 le P1.1 tsa CC2530 li hokahane le LNA_EN le PA_EN tsa PA ka ho latellana, 'me tsa boemo bo holimo ha li sebetse.
• LNA_EN e lula e phahame, module e lula e amohela; PA_EN e lula e phahame, module e lula e fetisa.
  

  Mokhoa oa ho sebetsa	LNA_EN	PA_EN
  Mokhoa oa ho amohela	1	0
  Mokhoa oa phetiso	0	1
  Mokhoa oa ho robala	0	0

• Software e qala matla a PA amplifier, le ka har'a sephutheloana sa nts'etsopele ea protocol ea SDK (Z-Stack 3.0.2), fetola tlhaloso e kholo ea file hall board_cfg.h, joalo ka ha ho bonts'itsoe setšoantšong se latelang:
  
• Fetola tšebetso ho hlokomela taolo ea othomathike ea matla a PA ampphepelo ea tsamaiso. Fumana tšebetso ea mac Radio Turn On Power () ho file mac_ radio_ defy .c le ho etsa liphetoho. Joalokaha ho bontšitsoe ka tlase:
  
• Fetola matla Matla a fapaneng a PA amplifiers li lumellana le matla a fapaneng a ho fetisa (yuniti: dBm). E18-MS1PA2-PCB/E18-MS1PA2-IPX e lumellana le 20dBm;
  E18-2G4Z27SP/E18-2G4Z27SI corresponds to 27dBm;
  Fumana palo e sa fetoheng ea CODE litšenyehelo macPib_t macPibDefaults ho file mac_pib.c, 'me u etse liphetoho joalokaha ho bontšitsoe lebokoseng le khubelu.
  

LBH

Mefuta ea puisano e khuts'oane haholo

Bohole ba puisano bo tla ameha ha tšitiso e le teng;  Sekhahla sa tahlehelo ea data se tla angoa ke mocheso, mongobo le tšitiso ea li-channel;  Mobu o tla monya le ho bonahatsa maqhubu a seea-le-moea a se nang mohala, kahoo ts'ebetso e tla fokola ha ho etsoa liteko haufi le mobu;  Metsi a leoatle a na le bokhoni bo boholo ba ho monya maqhubu a seea-le-moea a se nang mohala, kahoo ts'ebetso e tla fokola ha ho etsoa liteko haufi le tsena;  Letšoao le tla ameha ha antenna e le haufi le ntho ea tšepe kapa e kenngoa ka mokotleng oa tšepe;  Ngoliso ea matla e ne e behiloe ka mokhoa o fosahetseng, tekanyo ea data ea moea e behiloe e le holimo haholo (e phahameng ea tekanyo ea data ea moea, sebaka se khuts'oane);  Phallo ea motlakase e tlasetage ka tlas'a mocheso oa kamore e ka tlase ho 2.5V, e ka tlaase ho voltage, ho theola matla a ho fetisa;  Ka lebaka la boleng ba manakana kapa ho nyallana ho fokolang pakeng tsa lenakana le mojule.

Module e bonolo ho senya

Ka kopo lekola mohloli oa phepelo ea motlakase, etsa bonnete ba hore ke 2.0V~3.6V, voltage phahameng ho feta 3.6V e tla senya mojule;  Ka kopo sheba botsitso ba mohloli oa matla, voltagha e khone ho fetoha haholo;  Ka kopo etsa bonnete ba hore mehato ea antistatic e nkoa ha u kenya le ho sebelisa, lisebelisoa tse phahameng tsa maqhubu li na le ts'oaetso ea motlakase;  Ka kopo netefatsa hore mongobo o sebakeng se lekanyelitsoeng, likarolo tse ling li na le maikutlo a mongobo;  Ka kopo qoba ho sebelisa li-module tlas'a mocheso o phahameng haholo kapa o tlase haholo.

BER (Tekanyo ea Phoso ea Bit) e phahame

Ho na le tšitiso ea mats'oao a li-co-channel haufinyane, ka kopo, se be hole le mehloli ea litšitiso kapa fetola khafetsa le kanale ho qoba tšitiso;  Phepelo e fokolang ea motlakase e ka baka khoutu e litšila. Etsa bonnete ba hore motlakase o ka tšeptjoa;  Mohala oa katoloso le boleng ba phepelo li fokola kapa li telele haholo, kahoo sekhahla sa phoso se holimo.

Tlhahiso ea tlhahiso

Reflow soldering mocheso

px" width="821">

Profile Sebopeho	Tšobotsi ea curve	Seboka sa Sn-Pb	Kopano ea mahala ea Pb
Peista ea Solder	Peista ea solder	Sn63/Pb37	Sn96.5/Ag3/ Cu0.5
Preheat Temperature min (Tsmin)	Mocheso o fokolang oa preheat	100 ℃	150 ℃
Mocheso o moholo oa mocheso (Tomax)	Boholo ba mocheso oa preheat	150 ℃	200 ℃
Nako ea Preheat (Temin ho Tsmax)(ts)	Nako ea ho qeta nako	60-120 set lao	60-120 set lao
Karolelano ea ramp- sekhahla sa ho nyoloha (Tsmax ho ea ho Tp)	Karolelano ea sekhahla sa ho nyoloha	3℃/motsotswana max	3℃/motsotswana max
Mocheso oa Mokelikeli (TL)	Mocheso oa mocheso oa metsi	183 ℃	217 ℃
Nako (tL) E bolokoa ka holimo (TL)	Nako e kaholimo ho liquidus	60-90 set lao	30-90 set lao
Mocheso o phahameng haholo (Tp)	Mocheso o phahameng	220-235 ℃	230-250 ℃
Karolelano ea ramp- sekhahla se tlase (Tp ho Tomax)	Karolelano ea sekhahla sa ho theoha	6℃/motsotswana max	6℃/motsotswana max
Nako ea 25 ℃ ho fihlela mocheso o phahameng	Nako ho tloha ho 25 ° C ho ea ho mocheso o phahameng	Metsotso e 6 max	Metsotso e 8 max

Reflow soldering curve

Lethathamo la lintlha tsa E18

Sehlahisoa module	Chip	Khafetsa	Matla	Sebaka	Boemo	Foromo ea sephutheloana	Antenna
		Hz	dBm	m	mm
E18-MS1-PCB	CC2530	2.4G	4	200	14.1*23	SMD	PCB
E18-MS1-IPX	CC2530	2.4G	4	240	14.1*20.8	SMD	IPEX
E18-MS1PA2-PCB	CC2530	2.4G	20	800	16*27	SMD	PCB
E18-MS1PA2-IPX	CC2530	2.4G	20	1000	16*22.5	SMD	IPEX
E18-2G4Z27SP	CC2530	2.4G	27	2500	16*27	SMD	PCB
E18-2G4Z27SI	CC2530	2.4G	27	2500	16*22.5	SMD	IPEX
E18-2G4U04B	CC2531	2.4G	4	200	18*59	USB	PCB

Khothaletso ea Antenna

Sehlahisoa module	Mofuta	Khafetsa	Fumana	Boemo	Ea fepang	Sehokedi	Sebopeho
		Hz	dBi	mm	cm
TX2400-NP-5010	Antenna e tenyetsehang	2.4G	2.0	10x50	–	IPEX	Flexible FPC Soft Antenna
EA-2400-JZ-3	Antenna ea thupa ea sekhomaretsi	2.4G	2.0	30	–	SMA-J	Lenakana le otlolohileng haholo, le otlolohileng hohle
EA-2400-JZ-5	Antenna ea thupa ea sekhomaretsi	2.4G	2.0	50	–	SMA-J	Lenakana le otlolohileng haholo, le otlolohileng hohle
TX2400-JW-5	Antenna ea thupa ea sekhomaretsi	2.4G	2.0	50	–	SMA-J	Lenakana le kobehileng, la omnidirectional
EA-2400-TK	Antenna ea thupa ea sekhomaretsi	2.4G	2.5	110	–	SMA-J	Sekhomaretsi se kobehang, antenna ea omnidirectional
EA-2400-TK	Antenna ea thupa ea sekhomaretsi	2.4G	3.0	200	–	SMA-J	Sekhomaretsi se kobehang, antenna ea omnidirectional
TX2400-XPL-150	Lenakana la sucker	2.4G	3.5	150	150	SMA-J	Antenna e nyenyane ea mohope, e boloka chelete e ngata

Sephutheloana

Hlahloba Histori

Phetolelo	Letsatsi	Tlhaloso	E hatisitsoe ke
1.0	2022-7-8	Phetolelo ea pele	Ning
1.1	2022-8-5	Litokiso tsa liphoso	Yan
1.2	2022-9-26	Kenya Setifikeiti sa Patent	Bin
1.3	2022-10-8	Ho lokisa phoso	Bin
1.4	2022-10-19	Ho lokisa phoso	Bin
1.5	2023-04-17	Ho lokisa phoso	Bin
1.6	2023-07-26	Phetoho ea sebopeho	Bin
1.7	2023-09-05	Ho lokisa phoso	Bin

Mabapi le rona

Tšehetso ea tekheniki: support@cdebyte.com
Litokomane le RF Setting link download: https://www.cdebyte.com
Kea le leboha ka ho sebelisa lihlahisoa tsa Ebyte! Ka kopo ikopanye le rona ka lipotso kapa litlhahiso: info@cdebyte.com Mohala: +86 028-61543675
Web: https://www.cdebyte.com
Aterese: B5 Mold Park, 199# Xiqu Ave, Setereke sa theknoloji e phahameng, Sichuan, China