DOSATRON D25RE09-11GPM Haha Hape Litaelo tsa Kit

Litaba pata

(Likarolo tse kenyellelitsoeng ka har'a kit li ngotsoe ka boputsoa)

Tlosa li-screws tse 4 (M101) botlaaseng ba yuniti. Hula kutu ea dosing ka kotloloho ho tlosa.

Hlakola nate ea hose e monyang (PDI038) 'me u hlahlobe nate ea valve (PDI036). Hlakola kopano ea li-valve tsa ho hlahloba (PJDI026) mokhoa oa ho hlokomela sekontiri se ka hare sa li-valve le selemo.
Tlosa nate ea ho notlela (PDI381) 'me u tlose selikalikoe sa ho notlela (P189). Tlosa sleeve e ntšo ea ho lokisa (P167U1) le molala oa tšepe oa tšepe (M079). Sututsa ka tieo ho tloha ka tlase ho lokolla kutu e tšoeu e kahare (PDI583) ho tsoa ho sleeve e graduated (P165).

Hlakola le ho tlosa kutu ea ente ea o-ring (JDI098) ho tsoa kutung e tšoeu (PDI583) ebe u e nkela sebaka ka o-ring e ncha.
Hlakola ho tlosa le ho nkela sebaka sa sleeve o-ring (J024) e fumaneng mangolo ho tloha ho sleeve e fumaneng mangolo (P165).

6. Kenya kutu ea ente (PDI583) ka holim'a sleeve e fumaneng mangolo (P165). Sututsa ka tieo kutung ea ente ho fihlela moo e tla fihla. Etsa bonnete ba hore groove e telele ea kutu ea ente e lumellana le leino ka har'a letsoho le phethiloeng.
Slide metal mounting collar (M079) holim'a sleeve e fumaneng mangolo (P165) le kutu ea ente (PDI583). Sekoahelo se khutlisetsang letsoho holim'a sleeve e koetlisitsoeng (P165) e lekaneng ho pepesa li-grooves tsa ho notlela sebakeng se tlase, se khoele sa kutu ea ente (PDI583). Lokisetsa meno a ka hare holim'a selikalikoe sa ho notlela (P189) ka li-grooves tse pepeneneng holim'a kutu e tlase ea ente (PDI583) 'me u theole li-grooves ho ea botlaaseng ba letsoho la ho lokisa (P167U1)

Screw locking nut (PDI381) khutlela kopanong ea kutu ea ente. Kenya li-valve tsa ho hlahloba tse ncha (PJDI026) mokhoa oa ho hlahloba ka hare ho khoune ea ho hlahloba ka har'a selemo ka har'a kutu e pepeneng ea ente. Hlakola nate ea valve ea cheke (PDI036) 'me u nke sebaka sa nate ea ho suction hose (PDI038).
Tobetsa konopo ea plunger ho e tlosa ebe u e nkela sebaka ka plunger seal e ncha (JDI106).

Lulakanya tataiso ea karo-karolelano ho kopano e ka pele ea ente 'me u kenye hape.
Lokisetsa molala oa tšepe (M079) le masoba 'meleng. Kenya li-screw tse 'nè u sebelisa #2 Phillips screw driver. Tlosa hose nut (PDI038) 'me u kopanye hape hose ea ho hula holim'a barb ea phuputso. Hokela hape hose nut (PDI038).

Ho etsa bonnete ba hore hose ha e kene moeeng, u ka 'na ua khetha ho seha bokaholimo ba hose ka hloko pele u kenya hape.

(Likarolo tse kenyellelitsoeng ka har'a kit li ngotsoe ka boputsoa)

Tlosa sekwahelo se putsoa.
Phahamisa piston ho tloha yuniti.
move screw (8M003) le wishbone holder (P394) ho tloha kopanong ea wishbone valve (MP178). Tlosa belofo ea ho kena ho tsoa kopanong ea eona e sireletsehileng ea clip-onwishbone (MP178).

Tlosa li-screws tse 4 bohareng ba khetla. Mochine o tla theoha.
Tlosa li-Actuator Springs (M238) ebe u li khutlisetsa.
Kenya mochini sebakeng se secha sa Piston Shell (P421). Etsa bonnete ba hore u tiisa li-screws ha u ntse u tšoere mochine o tsoang ka tlase ho netefatsa hore ho na le sebaka se sireletsehileng, se lekanang le bokahare ba khetla ea piston (P421).

Clip wishbone assembly (MP178) e khutlela sebakeng sa eona se nepahetseng holim'a valve ea ho kena. Sireletsa mokokotlo oa kopano ea wishbone ka ho kenya wishbone holder (P394) le ho sireletsa ka screw (8M003).