DJI RC Pro Mookameli oa Remote

Tlhahisoleseding ya Sehlahiswa

Litlhaloso

• Mohlala: DJI RC Pro
• User Manual Version: v1.4 2023.07

Selelekela
DJI RC Pro ke taolo e hole e etselitsoeng ho sebelisoa ka li-drones tsa DJI. E fana ka mefuta e mengata e fapaneng ea likarolo le ts'ebetso ho ntlafatsa boiphihlelo ba hau ba ho fofa.

Sehlahisoa Profile
DJI RC Pro e na le likarolo tse latelang:

1. Manakana: Taolo ea lifofane e fetisang le lipontšo tsa waelese tsa video.
2. Konopo ea ho Khutlela: Tobetsa hang ho khutlela skrineng se fetileng. Tobetsa habeli ho khutlela skrineng sa lapeng.
3. Control Sticks: Sebelisa lithupa tsa taolo ho laola metsamao ea sefofane. Beha mokhoa oa ho laola sefofane ho DJI Fly. Lithupa tsa taolo lia ntšoa 'me ho bonolo ho li boloka.
4. Khutlela Lehae (RTH) Konopo: Tobetsa o hatelle ho qala RTH. Tobetsa hape ho hlakola RTH.
5. Konopo ea ho Emisa Sefofane: Tobetsa hanngoe ho etsa hore sefofane se robehe ebe se okametse sebakeng (feela ha GNSS kapa Vision Systems li le teng). Konopo ea Flight Pause e ka fapana ka mekhoa e fapaneng e bohlale ea sefofane. Sheba tlhaloso ea konopo ea khefutso ea sefofane bakeng sa lintlha tse ling.
6. Phetoho ea Mokhoa oa Sefofane: Fetolela lipakeng tsa Cine, Tloaelehileng, le mokhoa oa Lipapali.
7. Konopo ea 5D: View likarolo tsa Konopo ea 5D ho DJI Fly ka ho kenya Khamera View, Di-setting, ebe o Laola.

Ho lokisetsa Remote Controller
Pele o sebelisa DJI RC Pro, o hloka ho etsa mehato e latelang:

1. Ho tjhaja Betri: Hokela remote control mohloding wa matla o sebedisa thapo ya ho tjhaja le adaptara e fanoeng. Dumella betri ho tjhaja ka botlalo pele o e sebedisa.
2. Ho hlomamisa: Hokela lithupa tsa taolo ho remote control haeba li e-so hoketsoe. Netefatsa hore li sebakeng se sireletsehileng.
3. Ho kenya tshebetsong Remote Control: Latela ditaelo tse ho Bukana ya ho Qala ka Potlako kapa Buka ya Mosebedisi ho kenya remote control. Sena se ka kenyelletsa ho e hokahanya le drone ea hau le ho hlophisa litlhophiso.

Ts'ebetso ea Taolo ea Remote
DJI RC Pro e fana ka lits'ebetso tse fapaneng tsa ho laola drone ea hau. Tse latelang ke tse ling tsa ts'ebetso ea bohlokoa:

• Ho hlahloba boemo ba betri: Tobetsa konopo e tsamaellanang kapa fihlella tlhahisoleseling ea boemo ba betri skrineng sa ho thetsa ho lekola boemo ba betri ea remote control.
• Ho tima/Ho tima: Tobetsa 'me u tšoare konopo ea matla ho bulela kapa ho tima remote control.
• Ho hokahanya Remote Controller: Latela litaelo tse ho Buka ea Mosebelisi ho hokela remote control le drone ea hau.
• Ho Laola Sefofane: Sebelisa lithupa tsa taolo ho tsamaisa sefofane ka litsela tse fapaneng. Sheba Buka ea Mosebelisi bakeng sa litaelo tse khethehileng tsa taolo tse ipapisitseng le mofuta oa hau oa drone.
• Ho laola Khamera: Fumana litaolo tsa khamera ho remote control ho lokisa litlhophiso, ho nka linepe le ho rekota livideo.
• Ho laola Gimbal: Sebelisa li-control tse inehetseng ho remote control ho laola motsamao oa gimbal le botsitso.
• Customizable Likonopo: Remoutu control e na le likonopo tseo u ka li khethang tse ka abeloang mesebetsi e itseng kapa likhutšoane bakeng sa ho fihlella kapele.
• Boemo ba LED le Maemo a Battery Li-LED Tlhaloso: Remoutu control e na le li-LED tse fanang ka tlhahisoleseling mabapi le boemo ba eona le boemo ba betri. Sheba Buka ea Mosebelisi bakeng sa tlhaloso e qaqileng ea matšoao a LED.
• Tlhokomeliso ea Selaoli sa Remote: Remoutu e ka fana ka litlhokomeliso kapa litemoso bakeng sa liketsahalo tse fapaneng. Ela hloko litlhokomeliso tsena 'me u shebe Buka ea Mosebelisi bakeng sa litaelo tse ling.
• Skrine se thetsoang: Remoutu control e na le skrineng se ts'oaroang bakeng sa ho fumana menyetla, litlhophiso le lits'ebetso tse ling. Sebelisa boitšisinyo ba ho thetsa ho sebelisana le sebopeho sa "touchscreen".

App ea DJI Fofa
DJI RC Pro e tsamaisana le sesebelisoa sa DJI Fly, se fanang ka likarolo le litsamaiso tse ling bakeng sa drone ea hau. Kenya sesebelisoa sesebelisoa sa hau sa mohala 'me u latele litaelo tse ho app ho hokela le ho laola drone ea hau u sebelisa remote control.

Lintlha tse tsoetseng pele
DJI RC Pro e fana ka likarolo tse tsoetseng pele tse ka ntlafatsang boiphihlelo ba hau ba ho fofa. Tse ling tsa likarolo tsena li kenyelletsa:

• Ho lekanya Compass: Latela litaelo tse ho Buka ea Mosebelisi ho lekanya sesupa-tsela sa drone ea hau. Sena se netefatsa boemo bo nepahetseng le ho tsamaea.
• Litlhophiso tsa HDMI: Fetola li-setting tsa HDMI ho remoutu e laolang ho hlophisa likhetho tsa tlhahiso ea video.
• Ntlafatsa Firmware: Kamehla ntlafatsa firmware ea remote control ho netefatsa ts'ebetso e nepahetseng le ho lumellana le likarolo tsa morao-rao.
• U sebelisa DJI Fly: Lekola likarolo le mesebetsi e fapaneng ea sesebelisoa sa DJI Fly ho holisa bokhoni ba drone ea hau.

LBH

1. P: Ke tjhaja betri ea remote control joang?
   K: Hokela remote control mohloling oa matla u sebelisa thapo e fanoeng ea ho tjhaja le adaptara. Netefatsa hore betri e tjhajilwe ka botlalo pele o e sebedisa.
2. P: Ke hokahanya molaoli oa hole joang le drone ea ka?
   A: Latela litaelo tse ho Buka ea Mosebelisi ho hokahanya selaoli se hole le mofuta oa hau o khethehileng oa drone. Hangata sena se kenyelletsa ho kenya tšebetsong drone le remote controller, ho qala mokhoa oa ho hokahanya, le ho netefatsa khokahanyo e atlehileng.
3. P: Nka etsa joang likonopo ho remote controller?
   A: Sheba Bukana ea Mosebelisi bakeng sa litaelo tsa ho iketsetsa likonopo ho remote controller. O ka abela mesebetsi e itseng kapa likhutšoane ho likonopo tse ka khonehang bakeng sa phihlello e potlakileng le e bonolo.
4. P: Bolelele ba phetisetso ea remote control ke eng?
   A: Selaoli se hole se ka fihla hole le sebaka sa eona sa phetisetso e kholo (FCC) sebakeng se bulehileng se se nang tšitiso ea motlakase se sebelisa drone ea MAVIC 3 sebakeng se bophahamo ba limithara tse ka bang 120. Sebaka sa sebele sa phetiso se ka fapana ho ipapisitsoe le maemo a tikoloho.
5. P: Betri ea remote controller e nka nako e kae?
   K: Nako e phahameng ea ts'ebetso ea "remote control" e ile ea lekoa sebakeng sa laboratoring 'me ke ea litšupiso feela. Bophelo ba betri bo ka fapana ho latela ts'ebeliso le maemo a tikoloho.

Bukana ea Mosebelisi

• Ho Batla Mantsoe
  Batla mantsoe a bohlokoa joalo ka "betri" le "kenya" ho fumana sehlooho. Haeba u sebelisa Adobe Acrobat Reader ho bala tokomane ena, tobetsa Ctrl+F ho Windows kapa Command+F ho Mac ho qala patlo.
• Ho ea ho Sehlooho
  View lethathamo le felletseng la lihlooho lethathamong la litaba. Tobetsa sehloohong ho ea karolong eo.
• Ho hatisa Tokomane ena
  Tokomane ena e tšehetsa khatiso e phahameng.

Lenane la Phetoho

Phetolelo	Letsatsi	Liphetoho
v1.2	2022.5	Litaba tse ntlafalitsoeng ka mor'a v03.01.07.00 firmware update.
v1.4	2023.7	Litaba tse ntlafalitsoeng ka mor'a v03.02.04.00 firmware update.

Ho sebelisa Bukana ena

Tšōmo

•  Bohlokoa
• Malebela le Malebela
• Referense

Bala Pele U Sebelisa Pele

Bala litokomane tse latelang pele u sebelisa DJITM RC Pro.

1. Tataiso ea ho Qala ka Potlako
2. Bukana ea Mosebelisi
   Ho khothalletsoa ho shebella livideo tsohle tsa thuto ho DJI ea semmuso websebaka mme o bale tataiso ea ho qala kapele pele o e sebelisa lekhetlo la pele. Sheba bukana ea mosebelisi bakeng sa lintlha tse ling.

Lithuto tsa Video
E-ea atereseng e ka tlase kapa u hlahlobe khoutu ea QR ho shebella livideo tsa thuto ea DJI RC Pro, tse bontšang mokhoa oa ho sebelisa DJI RC Pro ka mokhoa o sireletsehileng.

https://s.dji.com/guide9

Sehlahisoa Profile

Selelekela

• Sesebelisoa sa hole sa DJI RC Pro se na le O3+, mofuta oa morao-rao oa theknoloji ea phetisetso ea litšoantšo ea DJI OCUSYNCTM, 'me e ka fetisa HD e phelang. view ho tloha k'hamera ea sefofane se bohōle ba lik'hilomithara tse 15 [1]. Mookameli oa hole o boetse o tšehetsa phetisetso e 'meli, ho etsa hore HD video downlink e be e tsitsitseng le e ka tšeptjoang. Mookameli oa remote o na le nako e ngata ea ho sebetsa ea lihora tse 3 [2].
• Skrini e Khanyang ka ho Fetisisa: Skrine e hahiloeng ka har'a 5.5-ka khanya e phahameng ea 1000 cd/m2 e ithorisa ka qeto ea 1920 × 1080 pixels.
• Likhetho tse ngata tsa Khokahano: Basebelisi ba ka hokela marang-rang ka Wi-Fi mme sistimi ea ts'ebetso ea Android e tla le mefuta e fapaneng ea mesebetsi joalo ka Bluetooth le GNSS.
• Audio le Video: Ka sebui se hahelletsoeng, molaoli oa hole o tšehetsa video ea H.264 4K/120fps le H.265 4K/120fps, e ts'ehetsang tlhahiso ea video ka boema-kepe ba Mini HDMI.
• Bokhoni bo Atolositsoeng ba Polokelo: Sebaka sa polokelo ea ka hare ea "remote controller" ke 32 GB hape e tšehetsa tšebeliso ea likarete tsa microSD ho boloka lifoto le livideo, ho etsa hore ho be bonolo ho romela k'homphieutha.
• E Tšepahala Libakeng Tse Fetang: Selaoli se ka thōko se ka sebetsa ka tloaelo ka har'a mocheso o pharaletseng ho tloha ho -10 ° ho ea ho 40 ° C (14 ° ho 104 ° F).
• E lumellana le Lifofane tse ngata tsa DJI: Basebelisi ba ka fetola sefofane ho app ea DJI Fly hore e tsamaisane le mefuta e fapaneng ea lifofane. Hajoale e tšehetsa Mavic 3, DJI Air 2S (ha u sebelisa mofuta oa firmware oa remote controller oa v03.01.05.00 kapa hamorao le mofuta oa app oa v1.5.8 kapa hamorao).

1. Mookameli oa hole a ka fihla sebaka sa eona sa phetisetso e kholo (FCC) sebakeng se bulehileng se se nang tšitiso ea motlakase e sebelisang MAVICTM 3 sebakeng sa bophahamo ba limithara tse ka bang 120.
2. Nako e phahameng ea ts'ebetso e ile ea lekoa tikolohong ea lab mme ke ea litšupiso feela.

DJI RC Pro

1. Liantenna
   Taolo ea lifofane e fetisang le lipontšo tsa waelese tsa video.
2. Konopo ea ho Khutlela
   Tobetsa hang ho khutlela skrineng se fetileng. Tobetsa habeli ho khutlela skrineng sa lapeng.
3. Lithupa tsa ho Laola
   Sebelisa lithupa tsa taolo ho laola metsamao ea sefofane. Beha mokhoa oa ho laola sefofane ho DJI Fly. Lithupa tsa taolo lia ntšoa 'me ho bonolo ho li boloka.
4. Khutlela Lehae (RTH) Konopo
   Tobetsa o hatelle ho qala RTH. Tobetsa hape ho hlakola RTH.
5. Konopo ea ho Khutsa Sefofane
   Tobetsa hanngoe ho etsa hore sefofane se robehe ebe se okametse sebakeng (feela ha GNSS kapa Vision Systems li le teng). Konopo ea Flight Pause e ka fapana ka mekhoa e fapaneng e bohlale ea sefofane. Sheba tlhaloso ea konopo ea khefutso ea sefofane bakeng sa lintlha tse ling.
6. Phetoho ea Mokhoa oa Sefofane
   Fetolela lipakeng tsa Cine, Tloaelehileng, le mokhoa oa Lipapali.
7. Konopo ea 5D
   View likarolo tsa Konopo ea 5D ho DJI Fly ka ho kenya Khamera View, Di-setting, ebe o Laola.
8. Konopo ea Matla
   Tobetsa hang ho sheba boemo ba betri ea hajoale. Tobetsa ebe o tobetsa o hatelle ho bulela kapa ho tima remote control. Ha remote control e butswe, tobetsa hang ho bulela kapa ho tima sekirini sa ho thetsa.
9. Netefatsa Konopo*
   Tobetsa hang ho netefatsa khetho. Konopo ha e na mosebetsi ha o sebelisa DJI Fly.
10. Skrine se thetsoang
    Thetsa skrine ho sebelisa remote control. Hlokomela hore touchscreen ha e kenelle metsi. Sebetsa ka hloko.
11. Slot ea karete ea MicroSD
    Sebelisa ho kenya karete ea microSD.
12. Boema-kepe ba USB-C
    Bakeng sa ho tjhaja.
13. Boema-kepe bo bonyenyane ba HDMI
    Bakeng sa tlhahiso ea video.
14. Dial ea Gimbal
    E laola ho sekama ha khamera.
15. Konopo ea ho Rekota
    Tobetsa hang ho qala kapa ho emisa ho rekota.
16. Boemo ba LED
    E supa boemo ba remote control.
17. Li-LED tsa boemo ba betri
    E bonts'a boemo ba betri ea hajoale ea remote control.
18. Focus/Konopo ya Shutter
    Tobetsa bohareng ba konopo ho tsepamisa maikutlo 'me u tobetse ho ea tlase ho nka foto.
19. Daela Taolo ea Khamera
    Bakeng sa taolo ea katametso.
    Mosebetsi oa konopo ha o hokahane le sefofane o tla khona ho etsoa ka mokhoa oa DJI Fly. Lintlafatso li sebetsa ha u sebelisa mofuta oa firmware oa remote controller oa v03.01.07.00 kapa hamorao le mofuta oa app oa v1.6.4 kapa hamorao.
20. Moea Vent
    Se sebedisoang bakeng sa ho qhala mocheso. Se ke oa thibela moea o kenang nakong ea tšebeliso.
21. Control Sticks Storage Slot
    Bakeng sa ho boloka lithupa tsa taolo.
22. Konopo ea C1 eo u ka e khethang
    Fetolela pakeng tsa ho etsa gimbal morao tjena le ho supa gimbal tlase. Ts'ebetso e ka beoa ho DJI Fly.
23. Sebui
    Dipoelo modumo.
24.  Konopo ea C2 eo u ka e khethang
    Tobetsa hang ho bulela kapa ho tima Lebone la Auxiliary Bottom. Ts'ebetso e ka beoa ho DJI Fly.
25. Ho Kena ha Moea
    Se sebedisoang bakeng sa ho qhala mocheso. U SE KE UA koahela moea o kenang nakong ea tšebeliso.

Ho lokisetsa Remote Controller

Ho tjhaja Betri

• Betri e hahelletsoeng e behiloe maemong a hibernation pele e tlisoa. E tlameha ho lefisoa pele e sebelisoa lekhetlo la pele.
• Ho nka lihora tse ka bang peli ho tjhaja remote ka botlalo ho sebelisa tjhaja ea USB e khothaletsoang ea 12V le hora le halofo u sebelisa tjhaja e khothaletsoang ea USB e sehiloeng 15V.
• Ho khothaletsoa ho sebelisa tjhaja ea USB e netefalitsoeng ea FCC/CE ea boleng ba 12V kapa 15V.
• Hlahisa betri bocha bonyane likhoeli tse ling le tse ling tse tharo ho thibela ho tsoa ho feta tekano. Betri ea fokotseha ha e bolokiloe nako e telele.

Ho phahamisa

1. Tlosa lithupa tsa taolo sebakeng sa polokelo ho remote control ebe u li fafatsa sebakeng sa tsona.
2. Hlakola manakana.

Etsa bonnete ba hore lithupa tsa taolo li kentsoe ka thata.

Ho kenya tshebetsong Remote Controller

Remoutu e tlameha ho kengoa tšebetsong pele e sebelisoa lekhetlo la pele. Netefatsa hore remote control e khona ho hokela Marang-rang nakong ea ts'ebetso. Latela mehato e ka tlase ho kenya Internet remote control.

1. Kenya matla ho remote control. Khetha puo ebe o tlanya "E latelang". Bala ka hloko lipehelo tsa tšebeliso le leano la lekunutu ebe u tlanya "Agree". Kamora ho netefatsa, beha naha/tikoloho.
2. Hokela remoutu ho inthanete ka Wi-Fi. Kamora ho hokela, tlanya "E latelang" ho tsoela pele le ho khetha sebaka sa nako, letsatsi le nako.
3. Kena ka akhaonto ea hau ea DJI. Haeba u sena ak'haonte, theha ak'haonte ea DJI 'me u kene.
4. Tlanya "activate" leqepheng la ho kenya tshebetsong.
5. Kamora ho kenya tshebetsong, kgetha hore na o batla ho kenela morero wa ntlafatso. Morero o thusa ho ntlafatsa boiphihlelo ba mosebelisi ka ho romella data ea tlhahlobo le ts'ebeliso ka bo eona letsatsi le letsatsi. Ha ho na data ea hau e tla bokelloa ke DJI.

Sheba khokahano ea inthanete haeba ts'ebetso e hloleha. Haeba khokahanyo ea Marang-rang e tloaelehile, ka kopo leka ho kenya remote control hape. Ikopanye le Ts'ehetso ea DJI haeba bothata bo ntse bo tsoela pele.

Ts'ebetso ea Taolo ea Remote

Ho hlahloba boemo ba betri
Tobetsa konopo ea matla hang ho lekola boemo ba betri ea hajoale.

Ho tima/Ho tima
Tobetsa ebe o tobetsa hape o hatelle ho bulela kapa ho tima remote control.

Ho hokahanya Remote Controller
Sefofane le remote controller li tlameha ho hokahana pele li sebelisoa. Latela mehato ena ho hokahanya remote control e ncha.
Mokhoa oa 1:

1. Matla ho remote controller le sefofaneng.
2. Tobetsa C1, C2, le konopo ea ho rekota ka nako e le 'ngoe ho fihlela boemo ba LED bo panya boputsoa 'me remote control ea lla.
3. Tobetsa 'me u tšoare konopo ea matla ea sefofane ho feta metsotsoana e mene. Sefofane se lla hang ho bontša hore se se se loketse ho hokela. Sefofane se lla habeli ho bontša hore khokahano e atlehile. Li-LED tsa boemo ba betri tsa remote control li tla benya li tiile.

Mokhoa oa 2:

1. Matla ho remote controller le sefofaneng.
2. Qala DJI Fly.
3. Khamera view, tlanya  ebe u khetha Control and Pair to Aircraft (Link).
4. Tobetsa 'me u tšoare konopo ea matla ea sefofane ho feta metsotsoana e mene. Sefofane se lla hang ha se bontša hore se se se loketse ho hokela. Sefofane se lla habeli se bonts'a hore khokahano e atlehile. Li-LED tsa boemo ba betri tsa remote control li tla khanya li tiile.
   • Etsa bonnete ba hore remote control e ka hare ho 1.6 ft (0.5 m) ea sefofane nakong ea ho hokahanya.
   • Etsa bonnete ba hore remoutu e hokahane le Marang-rang ha o kena o sebelisa ak'haonte ea DJI.

Ho Laola Sefofane

Mokhoa oa ho laola

• Lithupa tsa taolo li laola tsela eo sefofane se shebang ka eona (pan), motsamao oa ho ea pele/morao (sekontiri), bophahamo (molumo), le motsamao oa ka ho le letšehali/le letona (moqolo). Mokhoa oa thupa ea taolo o etsa qeto ea mosebetsi oa motsamao o mong le o mong oa thupa ea taolo. Mefuta e meraro e reriloeng esale pele (Mode 1, Mode 2, le Mode 3) e teng 'me mekhoa ea tloaelo e ka hlophisoa ho DJI Fly.
• Boemo ba kamehla ke Mode 2. Ho e 'ngoe le e 'ngoe ea mekhoa e meraro e lokiselitsoeng esale pele, sefofane se fofa sebakeng se lebileng kamehla ha lithupa ka bobeli li le bohareng. Sheba lipalo tse ka tlase ho bona mosebetsi oa thupa e 'ngoe le e' ngoe ea taolo ka mekhoa e meraro e hlophisitsoeng esale pele.

Mokhoa oa 1

Mokhoa oa 2

Mokhoa oa 3

• Boemo bo bohareng: lithupa tsa taolo li tsepame.
• Ho tsamaisa taolo stick/ Ketso ya ho laola: dithupa di sutumetsoa hole le bohare.

Setšoantšo se ka tlase se hlalosa mokhoa oa ho sebelisa thupa e 'ngoe le e' ngoe ea taolo. Mokhoa oa 2 o sebelisitsoe joalo ka mohlalaample.

Remote Controller (Mode 2)	Sefofane (Se Bontša Tsela ea Nko)	Litlhaloso
		Ho isa thupa e letšehali holimo kapa tlase ho fetola bophahamo ba sefofane. Sutumelletsa thupa holimo ho nyoloha le ho theoha ho theoha. Ha thupa e ntse e sutumetsoa hole le boemo bo bohareng, sefofane se tla fetola bophahamo ka potlako. Sututsa thupa ka bonolo ho thibela liphetoho tsa tšohanyetso le tse sa lebelloang bophahamong.
		Ho tsamaisa thupa e letšehali ho ea ho le letšehali kapa ho le letona ho laola mokhoa oa sefofane. Sututsa thupa ka ho le letšehali ho potoloha sefofane ho ea ka nako le ho le letona ho potoloha sefofane ho ea ka tšupa-nako. Ha thupa e ntse e sutumetsoa hole le boemo bo bohareng, sefofane se tla potoloha ka potlako.
		Ho tsamaisa thupa e nepahetseng holimo le tlase ho fetola molumo oa sefofane. Sututsa thupa hodimo ho fofela pele le tlase ho fofela morao. Ha thupa e ntse e sutumetsoa hole le boemo bo bohareng, sefofane se tla tsamaea kapele.
		Ho isa thupa e nepahetseng ho le letšehali kapa ho le letona ho fetola moqolo oa sefofane. Sututsa thupa ka ho le letšehali ho fofela ka ho le letšehali le ho le letona ho fofa ka ho le letona. Ha thupa e ntse e sutumetsoa hole le boemo bo bohareng, sefofane se tla tsamaea kapele.

• Beha remote control hole le lisebelisoa tsa makenete ho qoba ho angoa ke tšitiso ea makenete.
• E le ho qoba tšenyo, ho kgothaletswa hore lithupa tsa taolo li tlosoe 'me li bolokoe sebakeng sa polokelo ho molaoli oa hole nakong ea lipalangoang kapa polokelo.

Phetoho ea Mokhoa oa Sefofane
Fetolela switch ho khetha mokhoa oa sefofaneng.

Boemo	Boemo ba Sefofane
S	Mokhoa oa Lipapali
N	Mokhoa o Tloaelehileng
C	Mokhoa oa Cine

• Tloaelehileng: Sefofane se sebelisa GNSS le Vision Systems le Infrared Sensing System ho fumana sebaka le ho tsitsisa. Ha lets'oao la GNSS le le matla, sefofane se sebelisa GNSS ho fumana sebaka le ho tsitsa. Ha GNSS e fokola empa mabone le maemo a mang a tikoloho a lekane, sefofane se sebelisa mekhoa ea pono ho fumana le ho tsitsisa.
• Mokhoa oa Lipapali: Ho Sport Mode, sefofane se sebelisa GNSS bakeng sa ho beha maemo 'me likarabo tsa sefofane li lokiselitsoe ho sebetsa ka thata le lebelo ho etsa hore e arabele haholoanyane ho laola metsamao ea lithupa. Hlokomela hore ho lemoha litšitiso ho koetsoe ho Sport Mode.
• Mokhoa oa Cine: Mokhoa oa Cine o thehiloe ho Mokhoa o Tloaelehileng mme lebelo la sefofane le lekanyelitsoe, ho etsa hore sefofane se be se tsitsitseng nakong ea ho thunya.

Sheba karolo ea mekhoa ea sefofaneng bukeng ea mosebelisi ea sefofane ho fumana lintlha tse ling mabapi le likarolo tsa mokhoa oa sefofane bakeng sa mefuta e fapaneng ea lifofane.

Konopo ea RTH
Tobetsa 'me u tšoare konopo ea RTH ho fihlela remote controller e lla ho qala RTH. Tobetsa konopo ena hape ho hlakola RTH le ho fumana taolo ea sefofane hape. Sheba karolo ea Khutlela Lehae ho fumana lintlha tse ling mabapi le RTH.

Sebaka se nepahetseng sa phetiso
Letšoao le pakeng tsa sefofane le remote control le tšepahala haholo ha manakana a eme a ipapisitse le sefofane joalokaha ho bontšitsoe ka tlase.

Sebaka se nepahetseng sa phetiso ke moo manakana a shebileng sefofaneng 'me lehlakoreng le pakeng tsa manakana le bokamorao ba remote control ke 180° kapa 270°. Lipapiso li bontša maemo ao mokhanni le sefofane ba leng hole.

•  Se ke oa sebelisa lisebelisoa tse ling tsa waelese tse sebetsang ka maqhubu a tšoanang le a remote control. Ho seng joalo, remote control e tla ba le tšitiso.
• Ho tla amoheloa molaetsa ka DJI Fly haeba lets'oao la phetiso le fokola nakong ea sefofane. Fetola li-antenna ho etsa bonnete ba hore sefofane se boemong bo nepahetseng ba phetisetso.

Ho Laola Khamera

Remote control e ka sebelisoa ho laola khamera.

1. Focus/Konopo ya Shutter
   Tobetsa halofo ea tlase ho auto focus ebe o tobetsa ho theosa ho ea tlase ho nka foto. Mokhoa oa lifoto o ka beoa ho DJI Fly.
2. Konopo ea ho Rekota
   Tobetsa hang ho qala kapa ho emisa ho rekota.
3. Daela Taolo ea Khamera
   Sebelisa ho lokisa katametso.

Ho laola Gimbal
Remote controller e ka sebelisoa ho laola gimbal.

1. Dial ea Gimbal
   Sebelisa ho lokisa ho sekamela ha gimbal. Fetola daela ho ea ka nako ho isa gimbal holimo. Fetolela k'haontareng ea ho daela ho ea ho oache ho sekamisetsa gimbal fatše.

Likonopo tse ka tloahelehang
Likonopo tseo u ka li khethang li kenyelletsa konopo ea C1, C2, C3* le 5D. Eya ho Litlhophiso tsa Sistimi ho DJI Fly ebe u khetha Control ho etsa mosebetsi oa konopo.

Bokhoni ba ho iketsetsa konopo ea C3 le ho daela ho nepahetseng ho tšehetsoa ha ho sebelisoa mofuta oa firmware oa remote controller oa v03.01.07.00 kapa hamorao le mofuta oa app oa v1.6.4 kapa hamorao.

Boemo ba LED le Battery Levels LEDs Tlhaloso

Boemo ba LED
Boemo ba LED bo bonts'a boemo ba khokahano le litemoso bakeng sa thupa ea taolo, boemo bo tlase ba betri, le mocheso o phahameng.

Mohlala o phatsimang	Litlhaloso
Bofubelu bo tiileng	E khaotsoe le lifofane
Ho panya ha khubelu	Thempereichara ea remote control e phahameng haholo kapa boemo ba betri ea sefofane bo tlase
Botala bo tiileng	E hokahane le lifofane
Boputsoa bo panya	Remoutu e hokahanya le sefofane
Bosehla bo tiileng	Ntlafatso ea firmware e hlotsoe
Ho panya ha mosehla	Boemo ba betri ea remote control bo tlase
Ho panya ha cyan	Lithupa tsa taolo ha li tsepame

Lipontšo tsa Boemo ba Betri
Matšoao a boemo ba betri a bonts'a boemo ba betri ea molaoli.

Tlhokomeliso ea Remote Controller
Remoutu e thothomela kapa e lla ha ho na le phoso kapa temoso. Ela hloko ha litaelo li hlaha skrineng sa ho ama kapa ho DJI Fly. Thellela fatše ho tloha holimo ho khetha O seke oa Tshwara kapa Ho Homola ho tima ditemoso.

Skrine se thetsoang

Skrine sa lapeng

1. Nako
   E hlahisa nako ea lehae.
2. DJI Fly
   Tlanya ho kenya DJI Fly.
3. Sebaka sa pokello ea lintho
   Tlanya ho sheba litšoantšo le livideo tse bolokiloeng.
4. Files
   Tlanya ho hlahloba hore e bolokiloe files.
5. Sebatli
   Tlanya ho bula sebatli.
6. Tlhophiso
   Tlanya ho kenya litlhophiso tsa sistimi.
7. Tataiso
   Tlanya ho bala tataiso le ho ithuta kapele ka likonopo tsa remote control le li-LED.
8. Letšoao la Wi-Fi
   E bonts'a boemo ba lets'oao la Wi-Fi ha e hoketsoe ho Wi-Fi. E ka bulela kapa ea emisoa ho li-shortcut setting.
9. Boemo ba Betri
   E bonts'a boemo ba betri ea remote control.

Ts'ebetso

• Thellela ho tloha ho le letšehali kapa ho le letona ho ea bohareng ba skrine ho khutlela skrineng se fetileng.
• Thellela holimo ho tloha tlase ho skrine ebe u lokolla ho khutlela skrineng sa lapeng.
• Thellela ka ho lla ka ho le letona ho tloha botebong ba skrine 'me u hatelle ho fihlella lits'ebetso tse sa tsoa buloa ha u le skrineng sa lapeng.
• Thellela holimo ho tloha tlase skrineng 'me u tšoarelle ho fihlella lits'ebetso tse sa tsoa buloa ha u se skrineng sa lapeng.

Lintlafatso tse latelang lia sebetsa ha u sebelisa mofuta oa firmware oa remote controller oa v03.01.07.00 kapa hamorao.

• Thellela ho tloha ho le letšehali kapa ho le letona ho ea bohareng ba skrine ho khutlela skrineng se fetileng.
• Thellela holimo ho tloha tlase ho skrine ho khutlela skrineng sa lapeng.
• Thellela holimo ho tloha tlase skrineng 'me u hatelle ho fihlella lits'ebetso tse sa tsoa buloa.

Shortcut Settings

1. Litsebiso
   Tobetsa ho hlahloba litemoso tsa sistimi.
2.  Haufinyane
   Tlanya ho sheba lits'ebetso tse sa tsoa buloa.
3. Lehae
    Tlanya ho khutlela skrineng sa lapeng.
4. Litlhophiso tsa Sistimi
   Tlanya ho fihlella litlhophiso tsa sistimi.
   5. Likhaoletso
   • : Tlanya ho nolofalletsa kapa ho tima Wi-Fi. Tšoara ho kenya li-setting le ho hokela kapa ho eketsa netweke ea Wi-Fi.
   • : Tlanya ho bulela kapa ho tima Bluetooth. Tšoara ho kenya litlhophiso le ho hokela lisebelisoa tse haufi tsa Bluetooth.
   • : Tlanya ho bulela mokhoa oa O se ke oa Tshwara. Ka mokhoa ona, litaelo tsa sistimi li tla emisoa.
   •  : Ntlafatso ea ponts'o. Ha e se e lumelletsoe, khanya ea pontšo e ea ntlafatsoa ho thusa ho thunya. Leha ho le joalo, ho na le phapang pakeng tsa mohloli le phello ea pontšo, ha setšoantšo sa mohloli kapa video e nkiloeng ke sefofane ha e amehe.
   •  : Tlanya ho qala ho rekota skrineng. Ha o ntse o rekota, skrine e bontša nako ea ho rekota.
     Tlanya Emisa ho emisa ho rekota.
   •  : Tlanya ho etsa skrini skrineng.
   •  : Lintlha tsa mohala. Tlanya ho bulela kapa ho tima data ea mohala; tobetsa nako e telele ho seta data ea mohala le ho hlahloba boemo ba khokahano ea marang-rang.
   • : Tlanya ho bulela mokgwa wa Sefofane. Wi-Fi, Bluetooth, le data ea mobile li tla tingoa.
5. Ho fetola Khanya
   : Skrine e maemong a khanya ea auto ha letšoao le totobalitsoe. Tlanya lets'oao kapa thellela bar ho fetohela ho mokhoa oa ho khanya ka letsoho.
6. Ho Fetola Bolumo
   Thelelisa bar ho lokisa molumo ebe o tlanya ho khutsisa. Hlokomela hore ka mor'a ho khutsisa, melumo eohle ea remote control e tla tima ka ho feletseng, ho kenyelletsa le molumo oa ho lla ha konopo le melumo e amanang le alamo. Ka kopo, bula semumu ka hloko.

Likonopo tsa Motsoako
Likarolo tse ling tse sebelisoang khafetsa li ka kengoa tšebetsong ka ho sebelisa likonopo tse kopaneng. Ho sebelisa likonopo tsa motsoako, tšoara konopo e ka morao 'me u sebelise konopo e eketsehileng.
Ho hlahloba Likonopo tsa Motsoako tse fumanehang
Sebelisa remote control, kenya skrine sa lapeng, 'me u tobetse Tataiso ho hlahloba likonopo tsa motsoako.

Ho Sebelisa Likonopo tsa Motsoako
Mesebetsi ea likonopo tsa motsoako e ke ke ea fetoloa. Tafole e latelang e bonts'a mosebetsi oa konopo e 'ngoe le e' ngoe ea motsoako. Tšoara konopo ea morao 'me u sebelise konopo e eketsehileng ha u sebelisa tšobotsi ena.

Likonopo tsa Motsoako	Tlhaloso
Back + Gimbal Dial	Fetola Khanya
Back + Camera Control Dial	Fetola Bolumo
Khutlela + Rekota Konopo	Rekota Screen
Khutlela + Konopo ea Shutter	Setšoantšo sa skrini
Khutlela + Konopo ea 5D	Holimo - Lapeng, Tlase - Litlhophiso tsa Shortcut, Leqeleng - Haufinyane

App ea DJI Fofa
Tlanya DJI Fly skrineng sa lapeng ho sheba boemo ba sefofane le ho seta liparamente tsa sefofane le khamera. Kaha DJI RC Pro e sebelisana le mefuta e mengata ea lifofane mme sebopeho sa DJI Fly se ka fapana ho latela mofuta oa sefofane, sheba karolo ea app ea DJI Fly bukeng ea mosebelisi ea sefofane se amehang bakeng sa tlhaiso-leseling e batsi.

E tsoetseng pele Feature

Ho lekanya Compass
Sesupa-tsela se ka 'na sa hloka ho lekanyetsoa ka mor'a hore remoutu e sebelisoe libakeng tse nang le tšitiso ea motlakase. Latela mehato e ka tlase ho lekanya remote control.

1. Kenya skrine sa lapeng.
2. Kgetha Di-setting, tsamaisetsa tlase, ebe o tlanya Compass.
3. Latela setšoantšo se skrineng ho lekanya remote control ea hau.
4. Mosebelisi o tla fumana molaetsa ha tlhahlobo e atlehile.

Litlhophiso tsa HDMI
The touchscreen e ka arolelanoa le ponts'o ka mor'a ho hokela koung ea HDMI ea remote controller. Qeto e ka hlophisoa ka ho kenya Litlhophiso, Pontšo, ebe Advanced HDMI.

Ntlafatsa Firmware

Ho sebelisa DJI Fly

1. Kenya remote control 'me u netefatse hore e hoketsoe inthaneteng.
2. Matha DJI Fly. Ho tla hlaha molaetsa ha firmware e ncha e fumaneha. Tlanya molaetsa ho kenya skrine ea ntlafatso.
3. Nchafatso e tla qala ka bo eona kamora ho jarolla firmware ea morao-rao.
4. Remoutu e qala hape ka bo eona ha ntlafatso e felile.
   • Etsa bonnete ba hore remoutu e na le boemo ba betri bo fetang 20% ​​le polokelo ea memori ea bonyane 6.8 GB pele e ka ntlafatsoa.
   • Apdeite e nka metsotso e ka bang 15 (ho ipapisitse le matla a marang-rang). Netefatsa hore remote control e hokahane le Marang-rang nakong ea ts'ebetso eohle ea ntlafatso.

Sehlomathiso

Tlhaloso

O3+
Ts'ebetso ea Frequency Range	2.400-2.4835 GHz; 5.725-5.850 GHz*
Max Transmission Distance (E sa sebetsoa, ​​e se nang tšitiso)	15 km (FCC); 8 km (CE / SRRC / MIC)
Matla a Phetiso (EIRP)	2.4 GHz: <33 dBm (FCC); <20 dBm (CE/SRRC/MIC) 5.8 GHz: <33 dBm (FCC); <14 dBm (CE); <23 dBm (SRRC)
WiFi
Protocol	802.11b/a/g/n/ac/ax 2×2 MIMO
Ts'ebetso ea Frequency Range	2.400-2.4835 GHz; 5.725-5.850 GHz*
Matla a Phetiso (EIRP)	2.4 GHz: <26 dBm (FCC); <20 dBm (CE/SRRC/MIC) 5.8 GHz: <26 dBm (FCC/SRRC); <14 dBm (CE)
bluetooth
Protocol	Bluetooth 5.1
Ts'ebetso ea Frequency Range	2.400-2.4835 GHz
Matla a Phetiso (EIRP)	<8 dBm
Kakaretso
Betri	Li-ion (5000 mAh @ 7.2 V)
Mofuta oa ho tjhaja	E khothaletsoa ho sebelisa lichaja tsa USB tse rehelletsoeng ka 12V kapa 15V
Rated Power	12 W
Bokhoni ba polokelo	ROM 32GB + polokelo e atolositsoeng ka karete ea microSD
Nako ea ho tjhaja	Lihora tse 2 (ho sebelisa tjhaja ea USB e behiloeng 12V) Lihora tse 1.5 (ho sebelisa tjhaja ea USB e behiloeng 15V)
Nako ea Ts'ebetso	Lihora tse 3
Boema-kepe ba Tlhahiso ea Video	Boema-kepe bo bonyenyane ba HDMI
Operation Temperature Range	-10° ho isa ho 40° C (14° ho isa ho 104° F)
Storage Mocheso Range	Ka tlase ho khoeli e le 'ngoe: -30° ho ea ho 60° C (-22° ho ea ho 140° F) Kgwedi e le nngwe ho isa ho tse tharo: -30° ho ea ho 45° C (-22° ho ea ho 113° F) Likhoeli tse tharo ho isa ho tse tšeletseng: -30° ho ea ho 35° C (-22° ho ea ho 95° F) Ho feta likhoeli tse tšeletseng: -30° ho ea ho 25° C (-22° ho ea ho 77° F)
Ho tjhaja Mocheso Range	5° ho isa ho 40° C (41° ho isa ho 104° F)
Meetso ea Lifofane e Tšehetsoeng**	DJI Mavic 3; DJI Air 2S
GNSS	GPS+ GLONASS+ Galileo
Boima ba 'mele	Hoo e ka bang. 680 g
Mohlala	R510

• * 5.8 GHz ha e fumanehe linaheng tse ling ka lebaka la melao ea lehae.
• ** DJI RC Pro e tla ts'ehetsa lifofane tse ling tsa DJI nakong e tlang. Etela ofisiri websaete bakeng sa tlhaiso-leseling ea morao-rao.
  • 20 © 2021 DJI Litokelo Tsohle li Behiloe.
  • Tšehetso ea DJI
  • http://www.dji.com/support

Litaba tsena li ka fetoha.

• Khoasolla mofuta oa moraorao ho tsoa ho https://www.dji.com/rc-pro/downloads
• Haeba u na le lipotso mabapi le tokomane ena, ka kopo ikopanye le DJI ka ho romella molaetsa ho DocSupport@dji.com.
• DJI ke lets'oao la khoebo la DJI.
• Copyright © 2021 DJI Litokelo Tsohle li Behiloe.

Litokomane / Lisebelisoa

DJI RC Pro Mookameli oa Remote [pdf] Bukana ea Mosebelisi RC Pro Remote Controller, RC Pro, Remote Controller, Controller

Litšupiso

• Bukana ea Mosebelisi