dji RC Motion 2 Controller

Lintlha tsa sehlahisoa: DJI RC Motion 2

DJI RC Motion 2 ke molaoli oa motsamao o etselitsoeng ho laola li-drones tsa bareki ba DJI le lik'hamera. E lumella basebelisi ho laola sefofane le kh'amera ka ho sisinyeha ha matsoho ka mokhoa o hlakileng, ho fana ka boiphihlelo ba ho fofa bo tebileng le ba tlhaho. Selaoli sa motsamao se na le li-LED tsa boemo ba betri, konopo ea matla, le konopo ea senotlolo bakeng sa ho laola litlhophiso tsa khamera.

Litaelo tsa Tšebeliso ea Sehlahisoa

Pele ho Sefofane
Pele o sebelisa DJI RC Motion 2 ka lekhetlo la pele, ho khothaletsoa ho shebella livideo tsohle tsa thupelo le ho bala tokomane e ka lebokoseng. Itokisetse sefofane sa hau sa pele ka ho sheba bukana ea mosebelisi bakeng sa tlhaiso-leseling e batsi.

Ho bulela/ tima
Ho bulela selaoli sa motsamao, tobetsa o hatelle konopo ea matla. Ho tima, tobetsa o hatelle konopo ea ho tima hape. Ho sheba boemo ba betri ea hajoale, tobetsa konopo ea matla hang. Li-LED tsa boemo ba betri li tla bonts'a boemo ba matla ba betri nakong ea ho tjhaja le ho tjhaja. Haeba boemo ba betri bo le tlase, ho kgothaletswa ho sebedisa tjhaja e tshehetsang 5V, 2A tlhahiso ho tjhaja sesebediswa.

Ho kopanya
Pele o hokahanya sefofane le se laolang motsamao, etsa bonnete ba hore sefofane, likhalase le selaoli sa motsamao li buletsoe. Bula lenane la li-goggles ebe u khetha Boemo ho netefatsa hore mofuta o nepahetseng oa sefofane oa hlaha. Haeba ho se joalo, khetha Fetola ho tloha hukung e kaholimo ho le letona la menyu ebe u khetha sefofane se nepahetseng. Netefatsa hore sefofane se hokahane le likhalase. Ho hokahanya sefofane le selaoli sa motsamao, tobetsa 'me u tšoare konopo ea matla sefofaneng ho fihlela boemo ba betri ba LED bo qala ho panya ka tatellano.

Ho Laola Khamera le Lifofane
Konopo e notlelang taolong ea motsamao e ka tobetsoa ho bula phanele ea litlhophiso tsa khamera ho FPV view. Tsamaisetsa ho daela ho sheba menu ea li-setting kapa ho lokisa boleng ba paramethara, ebe o tobetsa daela ho netefatsa khetho eo. Tobetsa o hatelle ho daela ho tsoa ho menu ea hajoale. Selaoli sa motsamao se ka sebelisoa ho laola khamera le sefofane ka metsamao e hlakileng ea matsoho.

Taolo ea Motion le Calibration
Karolo ea taolo ea motsamao e lumella basebelisi ho laola sefofane ka metsamao e hlakileng ea matsoho. Tlhokomeliso ea molaoli oa motsamao e fana ka litemoso haeba ho na le mathata ka molaoli oa motsamao. Tekanyetso ea taolo ea motsamao e netefatsa ts'ebetso e nepahetseng le e tšepahalang ea molaoli oa motsamao.

Firmware Update
Lintlafatso tsa kamehla tsa firmware li lokolloa ho ntlafatsa ts'ebetso le botsitso ba DJI RC Motion 2. Sheba buka ea mosebedisi bakeng sa litaelo tsa ho ntlafatsa firmware.

Ho Batla Mantsoe
Batla keywords such as “battery” and “install” to find a topic. If you are using Adobe Acrobat Reader to read this document, press Ctrl+F on Windows or Command +F  on Mac to begin a search.

Ho ea ho Sehlooho
View lethathamo le felletseng la lihlooho lethathamong la litaba. Tobetsa sehloohong ho ea karolong eo.

Ho hatisa Tokomane ena
Tokomane ena e tšehetsa khatiso e phahameng.

Lenane la Phetoho

Phetolelo	Letsatsi	Liphetoho
v1.2	2023.04	E ntlafalitse mesebetsi ea ho daela ea FN. E ntlafalitse mekhoa ea ntlafatso ea firmware. E ntlafalitse lenane la lihlahisoa tse tšehetsoeng.

Ho sebelisa Bukana ena

Tšōmo

⚠ Bohlokoa

Malebela le Malebela

Pele ho Sefofane
Ho khothaletsoa ho shebella livideo tsohle tsa thupelo le ho bala tokomane e kahare ho lebokose pele u e sebelisa khetlo la pele. Itokisetse sefofane sa hau sa pele ka ho sheba bukana ea mosebelisi bakeng sa lintlha tse ling.

• 5.8 GHz ha e tšehetsoe libakeng tse ling. Sehlopha sena sa maqhubu se tla tima ha sefofane se kentsoe kapa se hokahantsoe le app ea DJI™ Fly libakeng tsena. Ela hloko melao le litaelo tsa lehae.

Lithuto tsa Video
https://www.dji.com/rc-motion-2/video

Khoasolla sesebelisoa sa DJI Fly
https://www.dji.com/rc-motion-2/downloads

Khoasolla DJI Assistant 2 (Letoto la Bareki ba Drones)
https://www.dji.com/rc-motion-2/downloads

Fetileview

1. Li-LED tsa boemo ba betri
2. Konopo ea ho notlela
   Qala / emisa likoloi: tobetsa konopo ea senotlolo habeli ho qala kapa ho emisa likoloi tsa sefofane. Ho tloha: tobetsa habeli ho qala lienjenere tsa sefofane, ebe o tobetsa o hatelle ho etsa hore sefofane se tlohe. Sefofane se tla nyolohela ho hoo e ka bang 1.2 m le ho fofa.
   Ho lula: ha sefofane se ntse se fofa, tobetsa le ho tšoara ho theola sefofane le ho emisa likoloi.
   Brake: tobetsa hang ho etsa hore sefofane se robehe mme se tsube sebakeng. Tobetsa hape ho notlolla maikutlo.
   Ha sefofane se ntse se etsa RTH kapa auto lunding, tobetsa konopo hang ho hlakola RTH kapa ho lula.
3. Joystick
   Fetolela hodimo kapa tlase ho etsa hore sefofane se nyolohe kapa se theohe. Fetolela ka ho le letšehali kapa ka ho le letona ho etsa hore sefofane se tsamaee ka ho le letšehali kapa ka ho le letona.
4. Konopo ea Mokhoa
   Tobetsa ho switjha dipakeng tsa Tlwaelo le mokgwa wa Sport. Tobetsa o hatelle ho qala RTH. Tobetsa hape ho hlakola RTH.
5. FN Daela
   • Thepa ea FN e ke ke ea sebelisoa ha e sebelisoa le DJI FPV Goggles V2.
     Tobetsa daela ho bula phanele ea litlhophiso tsa khamera ho FPV view. Tsamaisetsa ho daela ho sheba menu ea li-setting kapa ho lokisa boleng ba paramethara, ebe o tobetsa daela ho netefatsa khetho eo. Tobetsa o hatelle ho daela ho tsoa ho menu ea hajoale.
6. Konopo ea Shutter / Record
   Tobetsa hang: nka foto kapa qala/ emisa ho rekota.
   Tobetsa o hatelle: chencha lipakeng tsa mekhoa ea foto le video.
7. Accelerator
   Tobetsa ho fofisa sefofane ho leba selikalikoeng sa likhalase. Suthela pele ho fofisa sefofane morao. Kenya khatello e eketsehileng ho potlakisa. E tlohele ho emisa le ho ōka.
8. Port ea USB-C
9. Konopo ea Matla / Konopo ea Khokahanyo
   Tobetsa konopo ea matla hang ho lekola boemo ba betri ea hajoale.
   Tobetsa, ebe o tobetsa o hatelle ho bulela kapa ho tima selaoli sa motsamao.
   Ha o buletsoe, tobetsa o hatelle konopo ea matla ho qala ho hokahanya.'
10. Lanyard Hole

Ho Sebelisa Motion Controller

Ho bulela/ tima

 

Tobetsa konopo ea matla hang ho lekola boemo ba betri ea hajoale.
Tobetsa, ebe o tobetsa o hatelle konopo ea matla ho bulela kapa ho tima selaolo sa motsamao.

Boemo ba betri bo bonts'a matla a betri nakong ea ho tjhaja le ho tjhaja. Maemo a li-LED a hlalositsoe ka tlase:

LED e butse.

LED ea khanya.

LED e tima.

Haeba boemo ba betri bo le tlase, ho kgothaletswa ho sebedisa tjhaja e tshehetsang 5 V, 2 A tlhahiso ho tjhaja sesebediswa.

• Etsa bonnete ba hore tlhahiso ea kamehla e phahamengtage ea tjhaja ke 5 V. Molumo o feteletsengtage tla senya sesebelisoa.

Tafole e ka tlase e bonts'a boemo ba betri ea LED nakong ea ho tjhaja.

Ho kopanya
Boitokisetso pele ho ho hokahanya:

1. Matla sefofaneng, likhalase, le selaoli sa motsamao.
2. Bula lenane la li-goggles. Khetha Boemo 'me u etse bonnete ba hore mofuta oa sefofane o bontšitsoeng ka holimo ho menu o nepahetse. Ho seng joalo, khetha Fetola ho tloha hukung e kaholimo ho le letona la menyu ebe u khetha sefofane se nepahetseng.
3. Etsa bonnete ba hore sefofane se hokahane le likhalase.

Kopanya sefofane le selaoli sa motsamao:

1. Tobetsa 'me u tšoare konopo ea matla sefofaneng ho fihlela li-LED tsa boemo ba betri li qala ho panya ka tatellano.
2. Tobetsa 'me u tšoare konopo ea matla selaoling sa motsamao ho fihlela molaoli o ntse o lla 'me boemo ba betri ba LED bo benya ka tatellano.
3. Selaoli sa motsamao se emisa ho lla hang ha khokahano e atlehile, 'me li-LED tsa boemo ba betri ea sefofane le motsamao li fetoha tse tiileng ebe li bonts'a boemo ba betri.

Sefofane se ka laoloa ka sesebelisoa se le seng sa remote control nakong ea sefofane. Haeba sefofane sa hau se hokahantsoe le lisebelisoa tse ngata tsa taolo e hole, tima lisebelisoa tse ling tsa taolo pele sefofane se fofa.

Tshebetso

Ha lisebelisoa tsohle li buletsoe 'me li hokahantsoe, hokela kou ea USB-C ea likhalase ho sesebelisoa sa mohala ebe u tsamaisa app ea DJI Fly. Sesebelisoa se tla tsebahatsa DJI RC Motion 2 ka bo eona ebe e e kenya ka mokhoa o khutsitseng.
Kenya sesebelisoa hang-hang ka mor'a ho reka ho qoba ho ama tšebeletso ea ka mor'a thekiso.

Ho Laola Khamera

FN Daela

• Thepa ea FN e ke ke ea sebelisoa ha e sebelisoa le DJI FPV Goggles V2.

Ho fetola liparamente tsa khamera: tobetsa daela ho bula phanele ea litlhophiso tsa khamera ho FPV view tsa likhalase. Tsamaisetsa ho daela ho sheba menu ea li-setting kapa ho lokisa boleng ba paramethara, ebe o tobetsa daela ho netefatsa khetho eo. Tobetsa o hatelle ho daela ho tsoa ho menu ea hajoale.

Ho laola ho sekama ha khamera: pele e tloha kapa nakong ea RTH le ho lula, tobetsa 'me u tšoare mohala o tsoang ho FPV. view ebe o tsamaisetsa hodimo kapa tlase ho sekamisa khamera. Lokolla ho daela ho emisa ho sekama ha khamera.
Ho fetola mokhoa oa ho atometsa ho Explore Mode: haeba sefofane se tšehetsa Explore Mode 'me Explore Mode e buletsoe, tsamaisa daela holim'a likhalase tsa FPV. view ho lokisa katametso ya khamera.

Konopo ea Shutter / Record
Tobetsa o hatelle ho chencha lipakeng tsa mekhoa ea foto le video. Tobetsa hang ho nka foto kapa ho qala kapa ho emisa ho rekota.

Ho Laola Sefofane

• Ho netefatsa tšireletseho ea sefofaneng ha u laola sefofane ka selaoli sa motsamao, tobetsa konopo ea senotlolo hang ho etsa hore sefofane se robe mariki le ho fofa pele u sebelisa likhalase. Ho hloleha ho etsa joalo ke kotsi ea polokeho 'me ho ka etsa hore sefofane se lahleheloe ke taolo.

Konopo ea Mokhoa
Molaoli oa motsamao o na le mekhoa e 'meli: Mokhoa o tloaelehileng le Mokhoa oa Lipapali. Mokhoa o tloaelehileng o khethoa ka mokhoa oa kamehla. Tobetsa konopo ea mode ho chencha lipakeng tsa Tloaelehileng le mokhoa oa Sport. Tobetsa o hatelle ho qala RTH. Tobetsa hape ho hlakola RTH.

Konopo ea ho notlela
Sebelisa konopo ea senotlolo ho laola ho tloha, ho lula le ho robeha ha sefofane:
Qala / emisa li-motors: tobetsa konopo ea senotlolo habeli ho qala kapa ho emisa likoloi tsa sefofane. Ho tloha: tobetsa habeli ho qala lienjenere tsa sefofane, ebe o tobetsa o hatelle ho etsa hore sefofane se tlohe. Sefofane se tla nyolohela ho hoo e ka bang 1.2 m le ho fofa.

• Ho lula: tobetsa 'me u tšoare konopo ea ho notlela ha sefofane se ntse se fofa ho ea lula le ho emisa likoloi ka bohona.
• Brake: nakong ea sefofane, tobetsa hanngoe ho pshatla sefofane le ho etsa hore se okamele sebakeng se nang le maikutlo a notletsoeng. Tobetsa hape ho notlolla maikutlo le ho ntshetsa pele taolo ya sefofane.
  Ha sefofane se ntse se etsa RTH kapa auto lunding, tobetsa konopo hang ho hlakola RTH kapa ho lula.
• Ho lula ha Battery e tlase ho ke ke ha hlakoloa.

Ho Emisa Likoloi Tsa Lifofane Bohareng ba sefofane: haeba ho hlaha boemo ba tšohanyetso (joalo ka ho thulana kapa sefofane se tsoile taolong) nakong ea sefofane, ho tobetsa konopo ea senotlolo ka makhetlo a mane ho ka emisa lienjene tsa sefofane hang-hang.

• Ho emisa likoloi bohareng ba sefofane ho tla etsa hore sefofane se soahlamane. Sebetsa ka hloko.

Joystick
Fetolela hodimo kapa tlase ho etsa hore sefofane se nyolohe kapa se theohe. Fetolela ka ho le letšehali kapa ka ho le letona ho etsa hore sefofane se tsamaee ka ho le letšehali kapa ka ho le letona.

• Ka mor'a hore likoloi tsa sefofane li qale ka ho tobetsa konopo ea senotlolo habeli, butle-butle sutumelletsa "joystick" holimo ho etsa hore sefofane se tlohe.
• Hang ha sefofane se fofela moo ho lulang teng, theola pina ea thabo ho theola sefofane. Ka mor'a hore u theohe, theola "joystick" 'me u eme ho fihlela likoloi li emisa.

Accelerator
Tobetsa accelerator ho fofela ntlheng ea selikalikoe ka har'a likhalase. Suthela pele ho fofisa sefofane morao. Kenya khatello e eketsehileng ho potlakisa. E tlohele ho emisa le ho ōka.

Lebelo le fofang le laoloang ke "joystick" le accelerator li ka hlophisoa ka tsela e ka tlase:

1. Bula lenane la li-goggles.
2. Kgetha Di-setting > Taolo > Motion Controller > Fumana Tuning, ebe o seta lebelo le phahameng nqa e nngwe le e nngwe.

Taolo ea Motsamao

Sebaka sa sefofane se ka laoloa ka ho sekamisetsa selaoli sa motsamao ka ho le letšehali le ka ho le letona. Sekama ka ho le letšehali ho bilika sefofane ho ea ka lehlakoreng la oache, 'me u sekamele ka ho le letona ho potoloha ho ea ka nako eo.
Selika-likoe se skrineng sa li-goggles se tla tsamaea ka ho le letšehali le ka ho le letona 'me phetiso ea setšoantšo e tla fetoha ka tsela e nepahetseng.
Ha sesupa-tsela se sekama se seholo, sefofane se tla potoloha kapele.

Eketsa selaoli sa motsamao hodimo le tlase ho laola ho sekama ha gimbal nakong ya sefofane.
Selika-likoe se skrineng sa li-goggles se tla ea holimo le tlaase 'me phetiso ea video e tla fetoha ka tsela e nepahetseng.

Ho laola ho nyoloha kapa ho theoha ha sefofane, qala ka ho sekamisetsa selaoli sa motsamao 90° holimo kapa tlase. Hang ha selikalikoe sa likhalase se kena letšoaong la ho nyoloha kapa ho theoha, tobetsa accelerator ho etsa hore sefofane se nyolohe kapa se theohe.

Tlhokomeliso ea Motsamaisi oa Motion
Selaoli se ka thōko se utloahala e le tlhokomeliso ha boemo ba betri bo le pakeng tsa 6% le 15%. Tlhokomeliso ea boemo ba betri e tlase e ka hlakoloa ka ho tobetsa konopo ea matla. Tlhokomeliso ea boemo ba bohlokoa ba betri e tla utloahala ha boemo ba betri bo le ka tlase ho 5% 'me e ke ke ea hlakoloa.
Remoutu control e lla tlhokomeliso nakong ea RTH. Tlhokomeliso e ke ke ea hlakoloa.

Tlhaloso ea Motsamaisi oa Motion
Sesupa-tsela, IMU, accelerator, le joystick ea selaoli sa motsamao li ka lekanyetsoa. Hang-hang lokisa li-module tse ling ha u khothalletsoa ho etsa joalo:

1. Bula lenane la li-goggles.
2. Kgetha Di-setting > Taolo > Motion Controller > RC Calibration.
3. Khetha mojule 'me u latele likhothaletso ho phethela litekanyo.

• U SE KE UA LEkanya sesebelisoa libakeng tse nang le tšitiso e matla ea makenete, joalo ka limakete, libaka tsa ho paka, kapa libaka tsa kaho tse nang le meaho ea konkreite e tiisitsoeng ka tlas'a lefatše.
• U SE KE UA nka lisebelisoa tsa ferromagnetic joalo ka mehala ea cellular nakong ea calibration.

Firmware Update

Sebelisa e 'ngoe ea mekhoa e latelang ho ntlafatsa firmware.

Ho sebelisa DJI Fly App

Ha e sebelisoa le DJI Avata:
Matla sefofaneng, likhalase, le selaoli sa motsamao. Etsa bonnete ba hore lisebelisoa tsohle li hokahane. Hokela boema-kepe ba USB-C ho sesebelisoa sa mohala, tsamaisa DJI Fly, 'me u latele likhothaletso tsa ho nchafatsa firmware. Etsa bonnete ba hore sesebelisoa sa mohala se hoketsoe inthaneteng nakong ea ntlafatso ea firmware.

Ha e sebelisoa le lifofane tse ling tsa DJI:
Tlosa sefofane. Matla holim'a likhalase le selaoli sa motsamao. Hokela kou ea USB-C ea likhalase ho sesebelisoa sa mohala ebe o tsamaisa DJI Fly. Khetha Profile > Taolo ya Sesebediswa. Fumana likhalase tse lumellanang. Khetha Firmware Update 'me u latele litaelo tse skrineng ho nchafatsa firmware. Etsa bonnete ba hore sesebelisoa sa mohala se hoketsoe inthaneteng nakong ea ntlafatso ea firmware.

Ho sebelisa DJI ASSISTANT™ 2 (Letoto la Bareki ba Drones)

1. Matla ho sesebelisoa. Hokela kou ea USB-C ea sesebelisoa khomphuteng u sebelisa thapo ea USB-C.
2. Qala DJI Assistant 2 'me u kene ka akhaonto ea DJI.
3. Khetha sesebelisoa ebe o tobetsa Firmware Update ka lehlakoreng le letšehali la skrine.
4. Khetha mofuta oa firmware.
5. Firmware e tla kopitsoa le ho ntlafatsoa ka bo eona.
6. Sesebelisoa se tla qala bocha ka mor'a hore ntlafatso ea firmware e phethe.

• Etsa bonnete ba hore komporo e hoketsoe inthaneteng nakong ea ntlafatso.
• Etsa bonnete ba hore sesebelisoa se na le matla a lekaneng pele u ntlafatsa firmware.
• Etsa bonnete ba hore u latela mehato eohle ea ho ntlafatsa firmware, ho seng joalo ntlafatso e ka 'na ea hlōleha.
• Ntlafatso ea firmware e tla nka metsotso e 'maloa. Ka kopo, ema ka mamello hore ntlafatso ea firmware e phethehe.
• Se ke oa ntša thapo ea USB-C nakong ea ntlafatso.
• Hlokomela hore ntlafatso e kanna ea seta liparamente bocha. Pele o apdeita, ela hloko litlhophiso tseo u li ratang 'me u li hlophise bocha kamora ho apdeita.

Sehlomathiso

Litlhaloso
DJI RC Motion 2

Nomoro ea Mohlala	R220
Boima ba 'mele	Hoo e ka bang. 170 g
Maqhubu a Tshebetso	2.4000-2.4835 GHz 5.725-5.850 GHz[1]
Transmitter Power (EIRP)	2.4 GHz: <30 dBm (FCC), <20 dBm (CE/SRRC/MIC) 5.8 GHz: <30 dBm (FCC), <23 dBm (SRRC), <14 dBm (CE)
Mocheso oa ho sebetsa	-10° ho isa ho 40° C (14° ho isa ho 104° F)
Nako ea Ts'ebetso	Hoo e ka bang lihora tse 5
Mofuta oa Betri o Kopantsoeng	Li-ion
Sistimi ea Battery Chemical	LiNiMnCoO2
Li-Goggles tse tšehelitsoeng	DJI Goggles Integra DJI Goggles 2 DJI FPV Goggles V2[2]
Mehlala ea Lifofane e Tšehetsoeng	DJI Avata DJI Mavic 3 Pro / DJI Mavic 3 Pro Cine DJI Mavic 3 / DJI Mavic 3 Cine DJI Mavic 3 Classic DJI Mini 3 Pro

1. Sehlopha sa 5.8 GHz frequency ha joale se thibetsoe linaheng kapa libakeng tse itseng. Ho fumana lintlha, sheba melao le melawana ea lehae.
2. Thepa ea FN e ke ke ea sebelisoa ha e sebelisoa le DJI FPV Goggles V2.

Aftersales Information
Etela https://www.dji.com/support ho ithuta haholoanyane ka maano a litšebeletso tsa kamora thekiso, lits'ebeletso tsa tokiso, le tšehetso.

Ikopanye
TŠEHETSO DJI

Litaba tsena li ka fetoha ntle le tsebiso. Khoasolla mofuta oa morao-rao ho tsoa ho DJI websebaka.

https://www.dji.com/rc-motion-2/downloads
Haeba u na le lipotso mabapi le tokomane ena, ka kopo ikopanye le DJI ka ho romella molaetsa ho: DocSupport@dji.com

DJI ke lets'oao la khoebo la DJI.
Copyright © 2023 DJI Litokelo Tsohle li Behiloe.

Litokomane / Lisebelisoa

dji RC Motion 2 Controller [pdf] Bukana ea Mosebelisi RC Motion 2, Mookameli, RC Motion 2 Controller

Litšupiso

• Bukana ea Mosebelisi