DIGILENT-logo.

DIGILENT PmodWiFi

DIGILENT-.PmodWiFi-sehlahisoa

Tlhahisoleseding ya Sehlahiswa

  • Lebitso la Sehlahiswa: PmodWiFi
  • Tlhatlhobo: B
  • Moetsi: Sehlopha sa Digilent, Inc.
  • Nomoro ea Mohlala: N/A
  • Websebaka: www.digilentinc.com

Likaroloana:

  • IEEE 802.11-e lumellanang le RF transceiver
  • E ts'ehetsa litefiso tsa data tsa 1 le 2 Mbps
  • Sebaka sa phetiso ho fihla ho 400 m
  • E hlophisitsoe ka aterese e ikhethang ea MAC
  • Antenna ea PCB e kopantsoeng
  • Setifikeiti sa taolo ea seea-le-moea bakeng sa US, Specification Type 2A
  • Lilaebrari li fumaneha setsing sa lisebelisoa

Litaelo tsa Tšebeliso ea Sehlahisoa

Tlhaloso ea Mosebetsi:

PmodWiFi e fana ka tšehetso ea IEEE 802.11b/g/n bakeng sa lits'ebetso tse kentsoeng ka litefiso tsa data tsa 1 le 2Mbps. E etselitsoe ho sebelisoa le malapa a microchip microcontroller (PIC18, PIC24, dsPIC33, le PIC32) le Microchip TCP / IP Stack.

1.1 Sehokelo:

Khokahano ea mantlha ea puisano le PmodWiFi ke bese ea SPI. PmodWiFi e boetse e fana ka pin e sebetsang e tlase ea tšitiso (~INT) le phini ea RST bakeng sa ho seta botjha ha hardware.

Pinout ea Sehokelo sa Sehokelo:

Pin Letshwao Tlhaloso
1 ~SS Khetha Makhoba
2 MOSI Master out/Lekhoba ho Lintlha
3 MISO Master in/Slave out Data
4 TS'ELISO Seriba oache
5 GND Sebaka sa Phepelo ea Matla
6 VCC Phepelo ea Matla (3.3V)
7 ~INT Khatisa Sephetho
8 ~RST Hardware Reset
9 ~WP Ngola Sireletsa
10 HIB Hibernate
11 GND Sebaka sa Phepelo ea Matla
12 VCC Phepelo ea Matla (3.3V)

Phepelo ea motlakase:

PmodWiFi e hloka motlakase oa 2.7V-3.6Vtage. Matla a matla a 3.3Vtage e fumaneha libotong tsohle tsa tsamaiso ea Digilent 'me e fanoa e le karolo ea 12-wire Pmod interface standard. Netefatsa hore boto ea sistimi e tlositsoe ho fana ka 3.3V ho module pele o sebelisa matla ho boto.

Ho fumana lintlha tse ling, sheba database ea MRF24WB0MA e fumanehang ho Microchip's websebaka.

Fetileview

PmodWiFi e fana ka phihlello ea Wi-Fi ka module ea transceiver ea radio ea Microchip® MRF24WG0MA Wi-Fi™. Basebelisi ba ka buisana le chip e lumellanang le IEEE 802.11g ka SPI le ho fihlela litefiso tsa data ho fihla ho 54 Mbps.

Likarolo li kenyelletsa:

  • IEEE 802.11-e lumellanang le RF transceiver
  • Romella lintlha ho 1 le 2 Mbps ho fihla ho 400 m
  • E hlophisitsoe ka aterese e ikhethang ea MAC
  • Antenna ea PCB e kopantsoeng
  • Setifikeiti sa taolo ea seea-le-moea bakeng sa US, Canada, Europe le Japane
  • Wi-Fi e netefalitsoe
  • PCB e nyane bakeng sa meralo e tenyetsehang 1.7“ × 1.0” (4.3 cm × 2.0 cm)
  • Sehokelo sa 12-pin Pmod se nang le sebopeho sa SPI
  • E latela Digilent Pmod Interface Specification Type 2A
  • Lilaebrari li fumaneha setsing sa lisebelisoa

Tlhaloso ea Ts'ebetso

PmodWiFi e fana ka tšehetso ea IEEE 802.11b/g/n bakeng sa lits'ebetso tse kentsoeng ka litefiso tsa data tsa 1 le 2Mbps. E etselitsoe ho sebelisoa le malapa a microchip microcontroller (PIC18, PIC24, dsPIC33, le PIC32) le Microchip TCP/IP Stack (ho jarolleloa mahala ho li-Libraries tsa kopo ea Microchip ho kenyelletsa le ex.ample lits'ebetso le khoutu ea mohloli). TCP/IP Stack e fumaneha ho www.microchip.com/wireless.

Sehokedi
Khokahano ea mantlha ea puisano le PmodWiFi ke bese ea SPI. Pini ea RST e fa moamoheli sesebelisoa se tlase se sebetsang, se sa ts'oaneng le sa PmodWiFi. PmodWiFi e boetse e fana ka pin e sebetsang e tlase ea tšitiso (~INT), e boleloang e le tlase ke PmodWifi ha data e fumaneha bakeng sa sesebelisoa sa moamoheli. Mohala oa ~INT ha o khothalletsoe holimo ka mor'a hore phetiso ea data e phetheloe. Lebelo la SPI SCK le ka fihla ho 25 MHz.

Sehokelo J1 – SPI Communications
Pin Letshwao Tlhaloso
1 ~SS Khetha Makhoba
2 MOSI Master out/Lekhoba ho Lintlha
3 MISO Master in/Slave out Data
4 TS'ELISO Seriba oache
5 GND Sebaka sa Phepelo ea Matla
6 VCC Phepelo ea Matla (3.3V)
7 ~INT Khatisa Sephetho
8 ~RST Hardware Reset
9 ~WP Ngola Sireletsa
10 HIB Hibernate
11 GND Sebaka sa Phepelo ea Matla
12 VCC Phepelo ea Matla (3.3V)

Tlhaloso ea lets'oao la sehokelo.
Tekanyetso ea sebopeho sa SPI e sebelisa mela e mene ea matšoao. Tsena ke khetho ea makhoba (~SS), master out lekhoba ho (MOSI), master in slave out (MISO), le serial clock (SCK). Matshwao ana a matshwao a matshwao a latelang ho MRF24WB0MA: ~SS e dumellana le letshwao la Chip Select (~CS), MOSI e tsamaisana le Serial Data Input (SDI), MISO e tsamaisana le Serial Data Output (SDO), mme SCK e tsamaisana le Serial Letšoao la oache (SCK).

Phepelo ea motlakase

  • PmodWiFi e etselitsoe ho sebetsa le liboto tsa Digilent microcontroller tse nang le likhokahano tsa lihlooho tse 12.
  • PmodWiFi e hloka motlakase oa 2.7V-3.6Vtage. Matla a matla a 3.3Vtage e fumaneha libotong tsohle tsa tsamaiso ea Digilent 'me e fanoa e le karolo ea 12-wire Pmod interface standard.
  • Liboto tsa tsamaiso ea Digilent tse nang le li-interface tsa Pmod li lumella khetho ea jumper ea matla a phepelo ea matlatage fuoa Pmod. Netefatsa hore boto ea sistimi e tlositsoe ho fana ka 3.3V ho module pele o sebelisa matla ho boto.
  • Bakeng sa tlhaiso-leseling e batsi ka MRF24WB0MA, bona database ea MRF24WB0MA e ka fumanehang ho Microchip's. websebaka.

Copyright Digilent, Inc. Litokelo tsohle li sirelelitsoe.
Mabitso a mang a lihlahisoa le a khampani a boletsoeng e kanna ea ba matšoao a beng ba ona.

E jarollotsoe ho tsoa Arrow.com.
1300 Henley Court
Pullman, WA 99163
509.334.6306
www.digilentinc.com

Litokomane / Lisebelisoa

DIGILENT PmodWiFi [pdf] Bukana ea Mosebelisi
moruti. B, PmodWiFi, Microchip MRF24WG0MA WiFi Radio Transceiver Module

Litšupiso

Tlohela maikutlo

Aterese ea hau ea lengolo-tsoibila e ke ke ea phatlalatsoa. Libaka tse hlokahalang li tšoailoe *