2-Axis Inclination Sensor Module
Lebokose la Taolo
PHAKANG MOTSAMAI
Sesebelisoa Ho fetaview
| 1. Phatlalatso ea Matla a 12V 2. Kenyo ea Sensor 3. Letšoao la LED la matla 4. Sensor LED Indicator |
5. SPDT Relay e hlahisoang 6. Seriyo se hlahisoang Switch 7. RS232/485 tlhahiso ea serial 8. USB 2.0 Standard-B Port |
Litlhokomelo tsa Tšireletso
- Etsa bonnete ba hore lisebelisoa tsohle li thehiloe hantle pele li kenngoa.
- Se ke oa lumella sesebelisoa ho kopana le metsi kapa maro a mang.
Ho seng joalo, ho ka hlaha ts'oaetso ea motlakase kapa mollo. - Tšoara sesebediswa ka hloko ho qoba hore sesebediswa se se ke sa wa kapa tshoso efe kapa efe ya mmele. Ho seng joalo, e ka baka tšenyo kapa ho se sebetse hantle.
- Se ke oa kenya sesebelisoa haufi le mehloli efe kapa efe ea mocheso joalo ka li-radiator, lirejista tsa mocheso, litofo, kapa lisebelisoa tse ling tse hlahisang mocheso.
- Se ke oa sebelisa sesebelisoa sena ka ntle ho mocheso oa -20°C ho ea ho +70°C.
Litaba tsa Kit
- Lebokose la Taolo
- Tataiso e Potlakileng
Tlhahiso ea setšoantšo sa khokahanyo ka "control box serial port".
Setšoantšo sa khokahanyo se hlahisoang ka lebokose la taolo USB Port
Khokahano Pin-out
Sensor DB-9 Sehokedi sa thapo ya monna se tswetse
| Pin No. | Tlhaloso |
| 1 | GND |
| 2 | NC (Ha ho Khokahano) |
| 3 | GND (ntle le Lebokose la Taolo) kapa Signal 1 (Bakeng sa Lebokose la Taolo feela) |
| 4 | GND (ntle le Lebokose la Taolo) kapa Signal 2 (Bakeng sa Lebokose la Taolo feela) |
| 5 | Kenyeletso ya Matla (E Laolwa ke 9V DC) |
| 6 | RS485 – A (Monahano wa Moamohedi o sa keneng/Tx+) |
| 7 | RS485 – B (Inverting Receiver Input/Tx-) |
| 8 | RS485 – Z (Inverting Driver Output)/Rx-) kapa RS232 – Rx |
| 9 | RS485 - Y (Noninverting Driver Output / Rx+) kapa RS232 - Tx |
Lebokose la Taolo RS232/485 tlhahiso ea serial
| Pin No. | Tlhaloso |
| 1 | NC |
| 2 | RS485 – A (Monahano wa Moamohedi o sa keneng/Tx+) |
| 3 | RS485 – B (Inverting Receiver Input/Tx-) |
| 4 | RS485 – Z (Inverting Driver Output)/Rx-) |
| 5 | RS485 - Y (Noninverting Driver Output / Rx+) |
| 6 | GND |
| 7 | NC |
| 8 | RS232 – Kenyo ya Moamohedi (Rx) |
| 9 | RS232 – Transmitter Output (Tx) |
Tlhaloso ea Setsebi
| Boholo (mm) | 234 x 132 x 53 |
| Boima ba 'mele (E ka ba.) | 460g |
| Matla Voltage | 12V ±1V DC |
| Tšebeliso ea Max Current | 1.2 A |
| I/O Com Protocol | • RS232/RS485: Likotoana tse 8 tsa data, ha ho parity, 1 stop bits, 115200bps • USB 2.0 • 4 x SPDT Relay -3A ho 12VDC (NC), 5A ho 12VDC (NO) |
| Mocheso oa ho sebetsa | -20°C ho ea ho +70°C |
| Mocheso oa polokelo | -30°C ho ea ho +80°C |
Lintlha:
- Tlhaloso ea sehlahisoa le ponahalo li ka fetoha bakeng sa ntlafatso ea sehlahisoa ntle le tsebiso pele.
Tiisetso
Boemo ba Digi-Pas® Digital bo netefalitsoe ho moreki oa mantlha hore a se be le bofokoli mosebetsing le thepa. JSB Tech, ka boikhethelo ba eona, e tla lokisa kapa e nke sebaka sa karolo efe kapa efe e nang le phoso e ka 'nang ea se ke ea sebetsa hantle tlas'a ts'ebeliso e tloaelehileng le e nepahetseng nakong ea tiisetso ea selemo sa 1 (e le' ngoe) ho tloha ka letsatsi la thomello. Temana ena ea tiisetso ea selemo se le seng HA E sebetse ho linaha tseo e leng litho tsa European Union (EU). Litheko tse entsoeng linaheng tseo e leng litho tsa EU li tla koaheloa ke melao e teng ea bareki ho pholletsa le European Union, e fanang ka litokelo tsa molao tsa tiisetso ho phaella ho ts'ireletso ea nako ea tiisetso ea selemo. Tiisetso e boletsoeng ka holimo e ke ke ea sebetsa ho likoli tse bakoang ke tšebeliso e mpe, tlhekefetso, kapa phetisetso ea Moreki, software e fanoeng ke Moreki kapa li-interfaces, kapa tokiso e sa lumelloeng kapa ts'ebetso e kantle ho maemo a tikoloho bakeng sa sehlahisoa. JSB Tech ha e fane ka tiiso ea hore ts'ebetso ea software ea sesebelisoa, kapa firmware, e ke ke ea sitisoa kapa ha e na liphoso. Tharollo e khethehileng tlas'a mangolo afe kapa afe le litiisetso tsohle tse boletsoeng mona, 'me re ke ke ra jara boikarabelo ba litšenyehelo tsa tahlehelo kapa tieho ea tšebeliso ea lisebelisoa, tšenyo e bakiloeng kapa e iketsahalletseng. Ha ho na waranti e 'ngoe e boletsoeng kapa e boletsoeng. JSB Tech e hana ka ho hlaka litiisetso tse boletsoeng tsa thekiso le ho itekanela molemong o itseng.
https://www.digipas.com/manual5000xy
JQC-2-05001-99-005
Tšehetso ea tekheniki
Lengolo-tsoibila: info@digipas.com
Litokomane / Lisebelisoa
 |
Digi-Pas QC-2-05001-99-005 2-Axis Inclination Sensor Control Box [pdf] Bukana ea Mosebelisi QC-2-05001-99-005 2-Axis Inclination Sensor Control Box, QC-2-05001-99-005, 2-Axis Inclination Sensor Control Box, Sensor Module Control Box, Module Control Box |
