DIABLO E LAOLA DSP-55 Loop le Mini Loop Vehicle Detector

Loop le Mini-Loop Vehicle Detector

• DSP-55 ke sesupa koloi se sebetsang ka thata se tla sebetsa ka matla afe kapa afetage ho tloha ho 8 ho isa ho 35 volts DC. Molumo o tlasetage range e loketse lisebelisoa tsa letsatsi.
• DSP-55 e ka hokeloa ho loop e tloaelehileng ea inductive kapa e 'ngoe ea li-loop tse nyane tsa Diablo Controls. Diablo Controls mini-loop ke sesebelisoa se senyane sa "pipe shape" se ka bang 4-1/2" ka 1" mme se etselitsoe ho patoa fatše ho bona likoloi.
• DSP-55 e ka sebelisoa e le sebui sa polokeho kapa sesupa sa ho tsoa mahala. Ha ea lokela ho sebelisoa e le loop ea polokeho haeba e sebelisoa le mini-loop. E boetse e na le monyetla oa ho ba "fail-safe" kapa "fail-sire".
• DSP-55 e na le liphetho tse tharo tse tiileng tsa FET tse bitsoang liphetho tsa A, B le -B. Liphetho tse peli tsa B ke "tloaelehileng" le "inverted". Metsoako ena ea liphetho e lumella hore DSP-55 e hokahane habonolo le liboto tse fapaneng tsa taolo.
• DSP-55 e na le litlhophiso tse 10 tsa kutlo tse ka khetheloang 'me e sebelisa sesebelisoa sa DIP sa maemo a 10 ho hlophisa sebui. Sena se kenyelletsa tieho kapa ts'ebetso ea ho eketsa nako le lebelo la ho kena kapa ho otla ha likarolo tsa ho tsoa.
• Sena se etsa hore DSP-55 e feto-fetohe le maemo haholo bakeng sa lits'ebetso tse hlokang ho feta setumo se tloaelehileng.
  

  Fetoha	Mosebetsi
  1	TLOA	Tloaelo	ON	2 Sek. Ho lieha	TLOA	2 Mets. Eketsa	ON	5 Mets. Eketsa
  2	TLOA		TLOA		ON		ON
  3	TLOA	Fail-Sireletsehile			ON	Hloleha-Sireletsehile
  4	TLOA	Boikutlo bo Tloaelehileng			ON	Sensitivity Boost
  5	TLOA	B Phatlalatso	ON	B Kena Pulse	TLOA	B Tsoa ho Pulse	ON	B Sephetho se hlolehileng
  6	TLOA		TLOA		ON		ON
  7	TLOA	Boteng bo Tloaelehileng			ON	Boteng bo Atolositsoeng
  8	TLOA	Inductive Loop			ON	Mini-Loop
  9	TLOA	Phahameng	ON	Med Phahameng	TLOA	Med Low	ON	Tlase
  10	TLOA		TLOA		ON		ON

Litlhaloso

• Loop Inductance: Ha e hlalosoe
• Thempereichara ea ho sebetsa: Ha e hlalosoe
• Tshebetso Voltage: 8 volts ho 35 volts DC
• Ts'ebetso ea hajoale: Ntle le mohala ke 31 mA boholo, Ka mohala ke 40 mA boholo
• Litekanyetso tsa Sephetho: Liphetho tsa Naha tse Tiileng: 250 milliamps @ 30 volts
• Sebaka: Polastiki e hananang le tšusumetso, 2.375 (H) x 0.86 (W) x 2.25 (D) li-inch / 60.4 mm (H) x 22 mm (W) x 58 mm (D)

Likaroloana 

• E ka hokahanngoa le loop e tloaelehileng ea inductive hammoho le li-mini-loops tsa Diablo Controls.
• Nyenyane profile, e phethahetseng bakeng sa lits'ebetso tse ngata.
• Liphetho tse tharo tsa Naha e Tiileng.
• Ts'ebetso e hlolehileng kapa e hlolehileng.
• Bophara bo tlase-tlasetagtshebetso
• Arola Matla / Ho hloleha le ho Fumana li-LED.
• B Liphetho e ka ba ho ba teng, ho otla ha pelo ha ho kenoa, ho otla ha pelo ha ho tsoa, ​​kapa ho hloleha ha loop.
• Pontšo ea Flicker e bonts'a sebaka sa ho lemoha ha o sebetsa ka mokhoa oa ho otla ha pelo.
• Ho lieha kapa ho eketsa nako hoa khoneha.

Tlhahisoleseding ya Sehlahiswa

DSP-55 Loop le Mini-Loop Vehicle Detector ke mochine o sebetsang oa koloi o sebetsang ka lebelo le leholo.tage fapaneng ea 8 ho 35 volts DC, e etsa hore e tšoanelehe bakeng sa lits'ebetso tse fapaneng tse kenyelletsang lisebelisoa tsa letsatsi. E ka hokahana le loops e tloaelehileng ea inductive kapa Diablo Controls mini-loops, e fanang ka phetoho mekhoeng ea ho lemoha. Sesebelisoa se na le liphetho tse tharo tsa boemo bo tiileng, mekhoa ea ts'ebetso e sirelelitsoeng e sa sireletsehang, le li-LED tse arohaneng tsa Power / Fail le Detect bakeng sa ho lekola habonolo.

Ho kenya

1. Hokela DSP-55 ho tlhophiso e lakatsehang ea loop ho latela litlhoko tsa hau tsa ho instola.
2. Netefatsa phepelo e nepahetseng ea matla ka har'a voltage fapaneng ea 8 ho 35 volts DC.

Tlhophiso

1. Sebelisa switch ea DIP ea maemo a 10 ho beha maemo a kutlo le ho etsa tieho kapa linako tse atolositsoeng.
2. Fetola switjha ea kutlo ho amohela boholo bo fapaneng ba loop kapa mini-loops.

Litlhophiso tsa Output

1. Beakanya liphetho tsa boemo bo tiileng A, B, le -B ho latela litlhoko tsa boto ea taolo ea hau.
2. Output B e ka hlophisoa hore e be teng, ho thula ha ho kenoa, ho otla ha molumo ha o tsoa, ​​kapa mekhoa ea loop failure.

Tlhokomelo

1. Lekola ts'ebetso ka ho sebelisa Flicker display e bonts'ang ho lula sebakeng sa ho lemoha ka mokhoa oa ho otla ha pelo.
2. Sebelisa li-LED tse arohaneng bakeng sa Power/Fail le pontšo ea boemo.

KHETHANG MAKHABANE 

Sensitivity Switch:
Sesebelisoa sena se na le switch ea rotary sensitivity ea maemo a 10. Yuniti e romelloa sebakeng sa 5 e leng boemo bo tloaelehileng ba kutlo. Sensitivity e ka fetoloa holimo kapa tlase ho tloha boemong bona ho amohela boholo bo fapaneng ba loop kapa mini-loops.

Tlhophiso	0	1	2	3	4	5	6	7	8	9
%ΔL/L	0.48	0.32	0.24	0.16	0.12	0.08	0.06	0.04	0.03	0.02
Nako ea Karabelo	70 ms ± 10 ms							140 ms ± 20 ms

Solid State Output A Control: Effects output A feela.

1	2	Mosebetsi
TLOA	TLOA	Sephetho sa A se na le boteng bo tloaelehileng
ON	TLOA	Output A e na le metsotsoana e 2 ea tieho
TLOA	ON	Output A e na le metsotsoana e 2 ea katoloso
ON	ON	Output A e na le metsotsoana e 5 ea katoloso

Ts'ebetso e hlolehileng:
Ka ho hloleha ho bolokehile, detector e tla ntša detector ha loop circuit e hloleha. Ha e sa sireletseha, mochine o ke ke oa ntša mochine o sirelletsang ha loop circuit e hlōleha. Seta switch 3 ea DIP hore e sebetse ka mokhoa o sireletsehileng. Beha switjha hore e sebetse ka mokhoa o sireletsehileng. Tlhokomeliso: Le ka mohla u se ke ua sebelisa mochine o sirelelitsoeng hantle bakeng sa loop ea polokeho.

3	Mosebetsi
TLOA	Output A e sebetsa ka mokhoa oa Fail-Safe
ON	Output A e sebetsa ka mokhoa oa Fail-Sireletsehile

Sensitivity Boost:
Seta switch 4 ea DIP hore e sebetse ka kutlo e tloaelehileng. Beha DIP switch 4 hore e ikemisetse ho matlafatsa kutlo nakong ea mohala ho ntlafatsa ho lemoha ha likoloi tsa libethe tse phahameng le motsoako oa literaka/tereilara. Matlafatso ea kutlo ha e sebetse maemong a mangata.

4	Mosebetsi
TLOA	Detector e sebelisa kutloisiso e tloaelehileng
ON	Detector e eketsa kutloisiso hang ha ho fumanoa

Taolo ea Sephetho sa Boemo bo tiileng B:
Effects output "B" feela.

5	6	Mosebetsi
TLOA	TLOA	B ke tlhahiso e tloaelehileng ea boteng
ON	TLOA	B sephetho ke "Entry" pulse
TLOA	ON	B output ke "Exit" pulse
ON	ON	B sephetho ke boemo ba "Ho hloleha".

Nako e Ekelitsoeng ea ho ba Teng:
Seta switch 7 ea DIP hore e tšoare boteng ba koloi metsotso e ka bang 60 pele u e lokisa. Beha switch hore e e tšoarelle nako e telele haholo, mohlomong matsatsi a 'maloa.

7	Mosebetsi
TLOA	Nako e tloaelehileng ea ho fumana
ON	Nako e atolositsoeng ea ho fumana

SELECTABLE FEATURES (E tsoela pele) 

Mofuta oa Loop:
Seta switch 8 ea DIP hore e sebetse ka loop e tloaelehileng ea inductive. Beha switch hore e sebetse ka "Diablo Controls mini-loop". Mini-loop mode e tla lula e le matla a ho kena. Ka hona, e nepahetse bakeng sa ts'ebetso ea ho tsoa mahala. Le ka mohla u se ke ua sebelisa loop e nyane joalo ka loop ea polokeho.

8	Mosebetsi
TLOA	Tloaelehileng inductive loop
ON	Diablo Controls mini-loop

Hangata: Maqhubu a ka khethoa ho sebelisa li-switches 9 le 10.

9	10	Mosebetsi
TLOA	TLOA	Maqhubu a phahameng ka ho fetisisa a loop
ON	TLOA	Maqhubu a mahareng a phahameng ka ho fetesisa
TLOA	ON	Leqhubu le tlase haholo la loop
ON	ON	Nako e tlase haholo ea loop

LITŠOANTŠI

Green Power LED:
Lebone la LED le tla lula le tsitsitse ho bontša hore detector e sebetsa ka mokhoa o tloaelehileng. Haeba LED e sa tiea, e bontša phoso ea hona joale kapa ea pele.

Phoso	Pontsho bakeng sa Hona Jwale	Pontšo ea Pele
Moqolo o tlasetage	2 Hz e nang le 50% ea potoloho ea mosebetsi	HA HO MOTHO
Bula Loop	Hlanya e le 1 KA metsotsoana e meng le e meng ea 2	1 flash OFF ka metsotsoana e meng le e meng ea 2
Loop e Khutšoanyane	2 e benya HO BUA ka metsotsoana e meng le e meng e 2	2 e khantša OFF metsotsoana e meng le e meng e 2
Phetoho e Kholo	3 e benya HO BUA ka metsotsoana e meng le e meng e 2	3 e khantša OFF metsotsoana e meng le e meng e 2

Leseli le Lefubelu la LED:
Lebone la LED le tla bulela ha koloi e le holim'a sebaka sa ho bona loop. Haeba tieho e hlophisitsoe, LED e tla benya butle ka nako ea ho lieha. Haeba katoloso e hlophisitsoe, LED e tla benya kapele nakong ea nako ea katoloso.

Leseli le Lefubelu la B LED:
LED e tla bulela ha tlhahiso ea B e sebetsa. Haeba ho khethiloe mokhoa oa ho otla ha pelo, LED e tla hlepha ha koloi e le sebakeng sa ho lemoha 'me tlhahiso e sa sebetse.

LIKHOPI KHOPI

www.LinearGateOpeners.com
800-878-7829
Sales@LinearGateOpeners.com

FAQS

P: Na DSP-55 e ka sebelisoa ka lisebelisoa tsa letsatsi?
A: E, DSP-55 e sebetsa ka molumo o tlasetage range e loketseng lisebelisoa tsa letsatsi.

P: DSP-55 e na le liphetho tse kae tsa boemo bo tiileng?
A: DSP-55 e na le liphetho tse tharo tsa boemo bo tiileng ba FET tse bitsoang A, B, le -B.

P: Mesebetsi e fapaneng ea switjha ea kutlo ke efe?
A: Sesebelisoa sa sensitivity se fana ka litlhophiso tse 10 tse ka khethoang ho fetola maemo a kutlo bakeng sa boholo bo fapaneng ba loop kapa mini-loops.

Litokomane / Lisebelisoa

DIABLO E LAOLA DSP-55 Loop le Mini Loop Vehicle Detector [pdf] Buka ea Mong'a DSP-55 Loop le Mini Loop Vehicle Detector, DSP-55, Loop le Mini Loop Vehicle Detector, Mini Loop Vehicle Detector, Loop Vehicle Detector, Vehicle Detector.

Litšupiso

• Bukana ea Mosebelisi