Danfoss TM IK3.CAN Remote Control Virtual Simulator

Litlhaloso:

• Mohlala: TM IK3.CAN
• E khethiloe e le: Khoebo

Litaelo tsa Tšebeliso ea Sehlahisoa

1.  Selelekela
   Selelekela sa sehlahisoa le litaelo tsa sona.
2. Litaelo Tlhaloso
   1. Li-Levers tse ka pele
      Tlhaloso ea li-levers tse ka pele le mesebetsi ea tsona.
   2. E fetola sefahleho sa sefahleho
      Lintlha tsa li-switches ho faceplate le mesebetsi ea tsona.
   3. Multikey ea Lehlakoreng
      Tlhaloso ea li-multikey tse ka thōko le mosebetsi oa eona.
3. Ho sebelisa Simulator
   1. Ho qala Kopo
      Tataiso ea ho qala kopo.
   2. Ho hokela Remote Control
      Litaelo tsa mokhoa oa ho hokela remote.

Litlhophiso

• Beha moeli oa nako bakeng sa lipapali
• Fetola boleng ba video
• Kenya tshebetsong kapa o tima melumo ya medumo
• Tsela ea ho qala papali hape: [ctrl] + [alt] + [r]

Lintho tse Tsamaisang le Lipakane
Lintlha tse mabapi le lintho tse tsamaeang le lipheo tsa simulator.
Litlhaloso tsa Hardware
Tlhokomeliso mabapi le ho lumellana ha hardware le li-setting.

Teknoloji Screen Melaetsa

• Tlhaloso ea liphoso le litšoantšo tsa CanBus
• Moelelo oa melaetsa e fapaneng ea tekheniki

Ho batle phoso
Mehato ea ho rarolla mathata a tloaelehileng ka khokahano ea USB le tšebelisano ea taolo.

Lipotso Tse Botsoang Khafetsa (FAQ):

• P: Ke lokela ho etsa eng haeba ke sa khone ho sebelisana le molaoli ha USB e hokahane?
  A: Sheba pele khokahano ea USB le boemo ba LED ba sehokelo sa KVaser. Netefatsa hore li-LED ka bobeli li ON. Haeba ho se joalo, theha khokahano lipakeng tsa transmitter le receiver ka ho tobetsa konopo ea Qala. Ebe o hokela USB hape mme o qale kopo hape.

Mosebedisi
Virtual Remote Control Simulator

MOHLALA: TM IK3. KA

 Litaelo tlhaloso

1. Li-Levers tse ka pele
2. E fetola sefahleho sa sefahleho

Fetoha	Keyboard	Mosebetsi
1	C Konopo	Hook switch: tlohella hook ho tshwara kapa ho lokolla ntho
2	H konopo	Mots'eare / bosiu: ho fetoha lipakeng tsa mots'eare le bosiu
3	Konopo ea J	Phetoho ea khamera: li-switches pakeng tsa lik'hamera tse peli tse tsitsitseng (Khamera e ka holimo kapa e ka thōko)  Feela ka tebo le orthogonal khamera
4	K konopo	Blinkers switch: ho bulela le ho tima matshwao a ho retela terakeng
5	Konopo ea Y	Ho fetola mebala: ho fetola 'mala oa crane pakeng tsa bofubelu le bosoeu
Emisa/Tshohanyetso	–	E bulela le ho tima selaoli (bona Ho hokela molaoli)

Multikey ka lehlakoreng

Fetoha	Keyboard	Mosebetsi
Qala/Lenaka	–	Ho letsa lenaka, ho hokela molaoli (bona Ho hokela molaoli) kapa qala ho sebelisa sesebelisoa

Ho sebelisa simulator

1. Ho qala kopo
   • Tsamaea ho foldareng moo kopo e lulang teng 'me u fumane file Danfoss.exe. The file e lokela ho ba le letšoao le latelang:
   • Qala kopo ka ho tobetsa habeli ho e phethisehang file.
2. Ho kopanya taolo ea remoutu
   • Pele o hokela USB, ka kopo, tobetsa sehokelong se ka tlase ebe o kenya li-driver.
     Lits'oants'o - Bakhanni ba Kvaser, Litokomane, Software, tse ling…
   • Hokela moamoheli mochining oa moamoheli ka USB.
   • Khokahano e khothaletsoang ea CAN/USB (e se e lekiloe ebile e netefalitsoe):
   • Kvaser Leaf v3 – Kvaser – Advanced CAN Solutions
     Qala transmitter ka ho lokolla konopo ea Stop, ebe o hokela transmitter ho moamoheli ka ho tobetsa konopo ea Qala.
3. Litlhophiso
   • Hang ha ts'ebeliso e se e qalile, keyboard e ka hokeloa ho sesebelisoa ho fetola mefuta e fapaneng ea litlhophiso.
   • Tobetsa ka nako e le 'ngoe [ctrI] le nomoro ea letlapa la linomoro ho fetola sebali moo sesebelisoa se sebetsang teng. Nomoro eo u e hatisang ke nomoro eo Windows e khethollang mochini oa ho hlahloba ka eona.
   • Ka ho tobetsa ka nako e le 'ngoe [ctrl], [alt] le (s) fensetere ea popup e hlaha skrineng. Ka fensetere ena u ka:
   • Khetha moeli oa nako ka metsotso bakeng sa papali e le 'ngoe.
   • Ka metsotso e 0, ha ho na moeli oa nako o behiloeng - Fetoha lipakeng tsa boleng bo holimo, bo mahareng le bo tlase ba video
   • Kenya tshebetsong kapa o tima melumo ya medumo.
   • Tobetsa ka nako e le 'ngoe (ctrl), [alt) le [r] ho qala papali hape.
4. Lintho tse tsamaeang le lipakane
   • Re setšeng sa kaho ’me re lokela ho nka lintho tse ling ebe re li hlophisa bocha ka terakeng ea rōna e le hore re phethe mosebetsi oa rōna.
   • Sepheo ke ho phahamisa lintho tse 'nè ka bonngoe le ho li kenya betheng ea teraka ntle le hore li arohane ka nako e fokolang e khonehang.
     Haeba molaoli a le sieo, keyboard e ka sebelisoa hape. Ha e 'ngoe ea lintho tse 'nè e behiloe sebakeng se setala, letšoao le hlaha setšoantšong se skrineng. Papali e fela ha lintho tsohle li behiloe kapa moeli oa nako o behiloe 'me nako e theohela ho 0.
   • Maemong ana ka bobeli ho tla bontšoa voutu:
   • 3 stamps haeba mosebelisi a behile lintho tsohle ka nako e ka tlase ho 75% ea nako
   • 2 stamps Haeba e behiloe ka nako e ka tlase ho 50%.
   • 1 stamp ho seng joalo

Litlhaloso tsa Hardware

• E khothalelitsoe:
  • Mofuta oa I7 12th kapa AMD Ryzen 9 5900HX
  • 16GB RAM
  • HDD SSD
  •  Karete ea litšoantšo ea Nvidia e inehetseng e nang le bonyane 4GB ea RAM. RTX 20 kapa 30 letoto.
• Lisebelisoa tse ling li ka tšehetsoa ka ho fetola liparamente tsa boleng ba litšoantšo ho Litlhophiso.

Melaetsa ea skrine ea tekheniki

• Ka har'a sesebelisoa ho kenyelelitsoe cheke ea liphoso tse ling tsa CanBus.
• Haeba e 'ngoe ea tsona e etsahala, letšoao le tla bontšoa karolong e ka tlaase ea skrine. Litšoantšo tseo li tla nyamela haeba setsebi se lokisa bothata.

Letšoao                      Tlhaloso

Bothata ka CanBus. E ka lateloa ho tsoa ho e 'ngoe ea matšoao a latelang.

Mofetisi le moamoheli ha li buisane.

Tefo ea betri e tlase 'me e hloka ho khutlisoa.

Ho batle phoso

• P. USB e hokahane empa ha ke khone ho sebelisana le molaoli.
• S. Qala ka ho hlahloba khokahanyo ea USB le LED ho sehokelo sa KVaser; LED ka bobeli e tlameha ho ON.
• Haeba ho khantšitsoe led e le 'ngoe feela, khokahano lipakeng tsa transmitter le moamoheli e tlameha ho theoa ka ho tobetsa konopo ea Qala. Ebe u leka ho hokahanya USB hape le ho qala sesebelisoa hape.

E khethiloe e le Khoebo
© Danfoss | E hlahisitsoe ke Danfoss CCS | 2024/04/10

Litokomane / Lisebelisoa

	Danfoss TM IK3.CAN Remote Control Virtual Simulator [pdf] Bukana ea Mosebelisi TM IK3.CAN Remote Control Virtual Simulator, TM IK3.CAN, Remote Control Virtual Simulator, Control Virtual Simulator, Virtual Simulator, Simulator.
	Danfoss TM IK3.CAN Remote Control Virtual Simulator [pdf] Bukana ea Mosebelisi TM IK3.CAN Remote Control Virtual Simulator, TM IK3.CAN, Remote Control Virtual Simulator, Control Virtual Simulator, Virtual Simulator, Simulator.

Litšupiso

• Bukana ea Mosebelisi