Li-Compressor tsa Moqolo tsa MLZ-B
Litaelo
Li-Compressor tsa Moqolo tsa MLZ-B
| A: Nomoro ea mohlala | E: Phepelo voltage fapaneng |
| B: Nomoro ea serial | F: Rotor e notletsoeng hajoale Boholo bo sebetsang hona joale |
| C: Tšireletso ea ka hare | G: Mofuta oa mafura le tefiso ea lebitso |
| D: Selemo sa tlhahiso | H: Sehatsetsi se Amoheletsoeng |
Lienfelopo tse sebetsang
'Mapa oa Ts'ebetso oa MLZ R454C
'Mapa oa Ts'ebetso oa MLZ R455A
Mokhahlelo o le mong
| Mehlala | E hlasetsoe boholo ba kgokelo |
Rotolock boholo ba kgokelo |
| MLZ 015-026 |
Suction 3/4″ Tlosa 1/2 ″ |
Ho hula 1″1/4 Hlakola 1″ |
| MLZ 030-045 |
Suction 7/8″ Tlosa 1/2 ″ |
Suct. 1″1/4 Hlakola 1″ |
| MLZ 048 |
Suction 7/8″ Tlosa 3/4 ″ |
Ho hula 1″1/4 Hlatsoa 1″ 1/4 |
| MLZ 058-076 |
Ho hula 1″1/8 Tlosa 7/8 ″ |
Ho hula 1″3/4 Hlahisa 1″1/4 |
Ho kenya le ho sebeletsa compressor ke basebetsi ba tšoanelehang feela. Latela litaelo tsena le mekhoa e metle ea boenjiniere ba sehatsetsi e amanang le ho kenya, ho laela, tlhokomelo le tšebeletso.
| Compressor e tlameha ho sebelisoa feela molemong oa(me) oa eona o hlophisitsoeng le ka har'a sebaka sa eona sa ts'ebeliso (sheba "meeli ea ts'ebetso0). Sheba litataiso tsa Kopo le database tse fumanehang ho tsoa ho cc.danfoss.com |
Le ka mohla u se ke ua sebelisa compressor ntle le sekoaelo sa lebokose la terminal sebakeng se sireletsehileng. |
Tlas'a maemo ohle, litlhokahalo tsa EN378 (kapa melaoana e meng e sebetsang ea polokeho ea lehae) e tlameha ho phethoa. Apara likhalase tse sireletsang le liatlana tsa mosebetsi. |
| Compressor e fanoa tlas'a khatello ea khase ea nitrogen (pakeng tsa 0.3 le 0.4 bar / 4 le 6 psi). Se ke oa arola liboutu, li-plug, li-fittings, joalo-joalo… ntle le haeba khatello eohle e tlositsoe ho komporo. |
Compressor e tlameha ho sebetsoa ka hloko sebakeng se otlolohileng (boemo bo phahameng ho tloha holimo: 15 °). | |
Lihokelo tsa motlakase
 |
 |
 |
Selelekela
Litaelo tsena li amana le li-compressor tsa moqolo tsa MLZ tse sebelisetsoang lits'ebetso tsa sehatsetsi.
Ba fana ka leseli le hlokahalang mabapi le polokeho le ts'ebeliso e nepahetseng ea sehlahisoa sena.
Ho tšoara le ho boloka
- Tšoara compressor ka hloko. Sebelisa mahahapa a inehetseng ka har'a sephutheloana. Sebelisa mokotla oa ho phahamisa oa compressor 'me u sebelise lisebelisoa tse nepahetseng le tse sireletsehileng tsa ho phahamisa.
- Boloka le ho tsamaisa compressor sebakeng se otlolohileng.
- Boloka konpresser lipakeng tsa -35°C le 70°C / -31°F le 158°F.
- Se ke oa beha sekontiri le sephutheloana ho pula kapa moea o senyang.
Mehato ea polokeho pele ho kopano
Le ka mohla u se ke ua sebelisa compressor sebakeng se tukang.
- Beha sekontiri sebakeng se bataletseng se nang le moepa o ka tlase ho 7°.
- Netefatsa hore phepelo ea motlakase e lumellana le litšobotsi tsa enjene ea compressor (sheba nameplate).
- Ha o kenya kompressor bakeng sa R404A, R507, R454C kapa R455A sebelisa thepa e boloketsoeng ka ho khetheha lihatsetsi tsa HFC tse neng li sa sebelisoe bakeng sa lihatsetsi tsa CFC kapa HCFC.
- Sebelisa li-tubes tsa koporo tse hloekileng le tse se nang metsi ka har'a sehatsetsi le lisebelisoa tsa tšepe tsa silevera.
- Sebelisa likarolo tsa tsamaiso e hloekileng le e se nang metsi.
- Liphaephe tse hoketsoeng ho kompressor li tlameha ho tenyetseha ka litekanyo tse 3 ho isa ho dampen vibrations.
- Compressor e tlameha ho lula e behiloe ka li-grommets tsa rabara tse fanoang ka compressor.
Kopano
- Tlosa butle-butle tefiso ea naetrojene ka har'a likou tsa ho tsoa le tse monyang.
- Hokela compressor ho sistimi kapele kamoo ho ka khonehang ho qoba tšilafalo ea oli ho tloha mongobo o teng.
- Qoba lisebelisoa tse kenang tsamaisong ha u ntse u khaola li-tubes.
Le ka mohla u se ke ua phunya masoba moo li-burrs li ke keng tsa tlosoa. - Braze ka hloko e kholo u sebelisa mekhoa ea morao-rao le liphaephe tsa moea tse nang le phallo ea khase ea nitrogen.
- Hokela lisebelisoa tse hlokahalang tsa polokeho le taolo. Ha sekepe sa schrader, haeba se le teng, se sebelisetsoa sena, tlosa valve e ka hare.
Ho lemoha ho dutla
Le ka mohla u se ke ua hatella potoloho ka oksijene kapa moea o omileng. Sena se ka baka mollo kapa ho phatloha.
- Se ke oa sebelisa dae ea ho lemoha e lutla.
- Etsa tlhahlobo ea tlhahlobo ea ho lutla ho sistimi e felletseng.
- Khatello e tlase ea teko ea lehlakore ha ea lokela ho feta 31 bar / 450 psi.
- Ha ho fumanwa ho dutla, lokisa moo ho dutlang teng, mme o boele o fumane ho dutla.
Vacuum dehydration
- Le ka mohla u se ke ua sebelisa compressor ho tlosa tsamaiso.
- Hokela pompo ea vacuum mahlakoreng ka bobeli a LP & HP.
- Hula sistimi ka har'a vacuum ea 500 µm Hg (0.67 mbar) / 0.02 inch Hg absolute.
- Se ke oa sebelisa megohmmeter kapa ho kenya motlakase ho komporo ea motlakase ha e ntse e le ka har'a vacuum kaha sena se ka baka tšenyo ea kahare.
Lihokelo tsa motlakase
- Tima 'me u arole phepelo ea mantlha ea motlakase.
- Likarolo tsohle tsa motlakase li tlameha ho khethoa ho latela maemo a lehae le litlhoko tsa compressor.
- Sheba lintlha tsa likhokahano tsa motlakase. Bakeng sa lits'ebetso tsa mekhahlelo e meraro, li-terminals li ngotsoe T1, T2, le T3. Bakeng sa lisebelisoa tsa mohato o le mong li-terminals li ngotsoe C (tloaelehileng), S (qala), le R (run).
- Li-compressor tsa Danfoss scroll li tla hatella feela ha li ntse li potoloha ho ea ka nako (neng viewed ho tloha ka holim'a komporo). Kaha li-motor tsa singlephase li tla qala ebe li matha ka lehlakoreng le le leng feela, ho potoloha ha morao ha se taba e kholo. Leha ho le joalo, li-motor tsa mekhahlelo e meraro li tla qala 'me li tsamaee ka tsela leha e le efe, ho itšetlehile ka li-angles tsa karolo ea matla a fanoeng. Tlhokomelo e tlameha ho nkoa nakong ea ho kenya ho netefatsa hore compressor e sebetsa ka tsela e nepahetseng.
- Sebelisa li-screw tsa ø 4.8 mm / #10 – 32 le litheminale tsa ¼” bakeng sa khokahanyo ea matla e nang le ring connect screw terminal (mofuta oa C). Fasten ka torque ea 3 Nm.
- Sebelisa li-tab tsa ø 6.3 limilimithara ho hokela litheminale tsa likharebe kapele (mofuta oa P).
- Sebelisa sekoti sa ho itlama ho hokela sekontiri lefatšeng.
Ho tlatsa tsamaiso
- Boloka compressor e tima.
- Boloka tefiso ea sehatsetsi ka tlase ho meeli e bontšitsoeng ea tefiso haeba ho khonahala. Ka holimo ho moeli ona; sireletsa konpresser khahlanong le moroallo oa metsi ka potoloho ea pumpdown kapa accumulator ea mohala oa ho hula.
- Le ka mohla u se ke ua tlohela silinda ea ho tlatsa e hokahaneng le potoloho.
| Mefuta ea li-compressor | Tefiso ea sehatsetsing | |
| MLZ015-019-021-026 | 3.6 lik'hilograma / 8 lb | |
| MLZ030-038-045-048 | 5.4 kq / 12 lb | |
| MLZ058-066-076 | 7.2 kq/16Ib | |
Netefatso pele ho komisi
Sebelisa lisebelisoa tsa tšireletso tse kang li-switches tsa khatello ea tšireletso le li-valve tsa liphallelo tsa mechine ho latela melao le litekanyetso tsa tšireletso tse sebelisoang ka kakaretso le sebakeng sa heno. Netefatsa hore lia sebetsa le hore li behiloe ka nepo.
Etsa bonnete ba hore li-setting tsa li-switches tsa khatello e phahameng ha li fete khatello e phahameng ea litšebeletso tsa karolo efe kapa efe ea sistimi.
- Ho khothalletsoa ho sebelisa sesebelisoa se nang le khatello e tlase ho qoba ts'ebetso ea khatello e tlase.
| Bonyane setting bakeng sa R454C le R455A |
1.3 bar (ka ho feletseng) / 19 psia |
- Netefatsa hore likhokelo tsohle tsa motlakase li tlameletsoe ka nepo le ho latela melao ea lehae.
- Ha hitara ea crankcase e hlokahala, e tlameha ho matlafatsoa bonyane lihora tse 8 pele e qala le ho qala ka mor'a ho koala nako e telele.
- Ka kopo hlompha 90 Nm ± 20 Nm bakeng sa ho tiisa torque ea linate tsohle tsa roto lock.
E qalang
- Le ka mohla u se ke ua qala compressor ha sehatsetsi se sa lefelloe.
- U se ke ua fana ka matla leha e le afe ho compressor ntle le haeba li-valve tsa tšebeletso ea ho hula le ho ntša li bulehile haeba li kentsoe.
- Matlafatsa compressor. E tlameha ho qala hang-hang. Haeba konpresser e sa qale, hlahloba ho lumellana ha wiring le voltage ho li-terminals.
- Qetellong ho potoloha ho ka bonoa ka liketsahalo tse latelang; lerata le feteletseng, ha ho na phapang ea khatello pakeng tsa ho hula le ho ntša metsi, le ho futhumala ha mela ho e-na le ho pholile hang-hang. Setsebi sa litšebeletso se lokela ho ba teng qalong ea ho qala ho netefatsa hore motlakase oa phepelo o khaotsoe hantle le hore compressor e potoloha ka tsela e nepahetseng. Li-compressor tsa MLZ Scroll li etselitsoe ho sebetsa nako e telele ho feta lihora tse 150 ka morao, empa joalo ka ha maemo a ho potoloha a sa hlokomelehe ka nako e telele, ho khothaletsoa li-monitor tsa mekhahlelo. Bakeng sa li-compressor MLZ048 le tse kholoanyane, li-monitor tsa mekhahlelo lia hlokahala bakeng sa lits'ebetso tsohle. Danfoss e khothaletsa tšireletso ea mekhahlelo bakeng sa li-compressor tsa bolulo.
- Haeba mosireletsi oa ka hare a tsoa, e tlameha ho theohela ho 60 ° C / 140 ° F ho qala bocha. Ho ipapisitse le mocheso oa tikoloho, sena se ka nka lihora tse 'maloa.
Sheba ka compressor e sebetsang
Sheba palo ea hona joale le molumotage. Tekanyo ea amps le li-volts nakong ea maemo a ho sebetsa li tlameha ho nkoa libakeng tse ling tsa motlakase, eseng ka lebokoseng la motlakase la compressor.
- Lekola superheat ho fokotsa kotsi ea ho slugging.
- Sheba boemo ba oli ka khalase ea pono (haeba e fanoe) ka metsotso e ka bang 60 ho netefatsa hore oli e nepahetseng e khutlela ho compressor.
- Hlompha meeli ea ts'ebetso.
- Sheba li-tubes tsohle bakeng sa ho thothomela ho sa tloaelehang. Metsamao e fetang 1.5 mm / 0.06 e hloka mehato ea tokiso joalo ka li-tube brackets.
- Ha ho hlokahala, sehatsetsi se eketsehileng sebakeng sa mokelikeli se ka eketsoa ka lehlakoreng la khatello e tlase kamoo ho ka khonehang ho tloha ho compressor. Compressor e tlameha ho sebetsa nakong ea ts'ebetso ena.
- Se ke oa lefisa sistimi.
- Le ka mohla u se ke ua lokolla sehatsetsi sepakapakeng.
- Pele o tloha sebakeng sa ho kenya, etsa tlhahlobo e akaretsang mabapi le bohloeki, lerata le ho lemoha ho lutla.
- Rekota mofuta le palo ea tefiso ea sehatsetsi hammoho le maemo a ts'ebetso e le tšupiso bakeng sa tlhahlobo ea nako e tlang.
Tlhokomelo
Khatello ea ka hare le mocheso oa holim'a metsi li kotsi 'me li ka baka kotsi e sa feleng. Basebelisi ba tlhokomelo le li-installer ba hloka tsebo le lisebelisoa tse nepahetseng. Thempereichara ea li-tubing e ka feta 100°C / 212°F mme e ka baka cheso e matla.
Netefatsa hore tlhahlobo ea nako le nako ea lits'ebeletso ho netefatsa ts'epahalo ea sistimi le joalo ka ha ho hlokoa ke melao ea lehae ea etsoa. Ho thibela mathata a amanang le komporo ea sistimi, ho khothaletsoa tlhokomelo e latelang ea nako le nako:
- Netefatsa hore lisebelisoa tsa tšireletso lia sebetsa le hore li setiloe hantle.
- Etsa bonnete ba hore sisteme e tsitsitse.
- Sheba setšoantšo sa compressor hajoale.
- Netefatsa hore sistimi e sebetsa ka tsela e lumellanang le litlaleho tsa khale tsa tlhokomelo le maemo a tikoloho.
- Hlahloba hore na likhokelo tsohle tsa motlakase li ntse li tlameletsoe ka ho lekaneng.
- Boloka kompressor e hloekile 'me u netefatse hore ha ho na mafome le oxidation holim'a khetla ea compressor, li-tubes le likhokahano tsa motlakase.
- Lintho tse nang le asiti / mongobo tsamaisong le oli li lokela ho hlahlojoa khafetsa.
Tiisetso
Kamehla fetisetsa nomoro ea mohlala le nomoro ea serial ka tleleime efe kapa efe filed mabapi le sehlahisoa sena. Tiisetso ea sehlahisoa e ka ba lefeela maemong a latelang:
- Ho ba sieo ha letlapa la mabitso.
- Liphetoho tsa kantle; haholo-holo, ho phunya, ho cheselletsa, maoto a robehileng, le matšoao a ho thothomela.
- Compressor e butsoe kapa ea khutla e sa koaloa.
- Mafome, metsi, kapa dae ea ho lemoha ho lutla ka har'a komporo.
- Tšebeliso ea sehatsetsi kapa mafura a sa amoheloeng ke Danfoss.
- Phapang efe kapa efe ho latela litaelo tse khothalelitsoeng tse amanang le ho kenya, ts'ebeliso, kapa tlhokomelo.
- Sebelisa lits'ebetsong tsa mobile.
- Sebelisa tikolohong e phatlohang ea sepakapaka.
- Ha ho na nomoro ea mohlala kapa nomoro ea serial e fetisitsoeng ka tleleime.
Ho lahla
Danfoss o khothalletsa hore li-compressor le oli ea compressor li sebelisoe hape ke k'hamphani e loketseng sebakeng sa eona.
Danfoss A / S
Litharollo tsa Boemo ba Leholimo
• danfoss.com
• +45 7488 2222
Tlhahisoleseding efe kapa efe, ho kenyeletswa, empa e sa felle feela ho tlhahisoleseding e mabapi le kgetho ya sehlahiswa, tshebediso ya sona kapa tshebediso ya sona, moralo wa sehlahiswa, boima, boholo, bokgoni, kapa datha efe kapa efe e nngwe ya tekheniki e bukeng ya dihlahiswa, ditlhaloso tsa dikhatalose, dipapatso, jj., le hore na e fumaneha ka mongolo, ka molomo, ka mokhoa oa elektroniki, inthaneteng kapa ka ho khoasolla, e tla nkuoa e le tsebo 'me e tlama feela haeba, ho isa boholeng boo, ho etsoa litšupiso tse hlakileng khotheishene kapa netefatso ea taelo. Danfoss e ke ke ea amohela boikarabelo leha e le bofe bakeng sa liphoso tse ka bang teng libukeng tsa libuka, libukana, livideo le lintho tse ling. Danfoss e na le tokelo ea ho fetola lihlahisoa tsa eona ntle le tsebiso. Sena se sebetsa le ho lihlahisoa tse otarang empa li sa tlisoa ha feela liphetoho tse joalo li ka etsoa ntle le liphetoho sebopeho, ho lekana, kapa tšebetso ea sehlahisoa.
Matšoao 'ohle a thepa ena ke thepa ea lik'hamphani tsa Danfoss A/S kapa tsa Danfoss. Danfoss le logo ea Danfoss ke matšoao a khoebo a Danfoss A/S. Litokelo tsohle li sirelelitsoe.
AN374931472821en-000101- 8510302P01AB
© Danfoss
Litharollo tsa Boemo ba Leholimo
Litokomane / Lisebelisoa
 |
Li-Compressors tsa Moqolo tsa Danfoss MLZ-B [pdf] Litaelo MLZ-B Scroll Compressors, MLZ-B, Scroll Compressors, Compressors |
