Tataiso ea ho Kena

Laola Likhasete

VLT® AutomationDrive FC 360

1 Tlhaloso

Tataiso ena ea ho instola e hlalosa mokhoa oa ho kenya k'hasete e tloaelehileng ea taolo le k'hasete ea taolo e nang le PROFIBUS/PROFINET bakeng sa VLT® AutomationDrive FC 360.

Likhasete tse latelang tsa taolo ke tsa VLT® AutomationDrive FC 360:

• Cassette e tloaelehileng ea taolo.
• Laola k'hasete ka PROFIBUS.
• Laola k'hasete ka PROFINET.

Litaelo tsa ho instola tataisong ena li sebetsa ho likhasete tsohle tsa taolo. Bakeng sa ho laola k'hasete e nang le PROFIBUS/PROFINET, kenya lisebelisoa tsa ho kopanya ka mor'a ho kenya k'hasete ea taolo. Fumana litaelo tsa ho kenya lisebelisoa tsa ho kopanya ka har'a sephutheloana sa lisebelisoa.

2 Lintho Tse Fanoeng

Lethathamo la 1: Lintho Tse Fanoeng

Tlhaloso		Nomoro ea khoutu
Mofuta o le mong ho e 1 oa li-cassette tsa taolo	Cassette e tloaelehileng ea taolo	132B0255
	Laola k'hasete ka PROFIBUS	132B0256
	Laola k'hasete ka PROFINET	132B0257
	Laola k'hasete ka PROFINET (e tšehetsa VLT® 24 V DC Supply MCB 106)	132B2183
Karete ea ho laola bakeng sa boholo ba sebaka se kampetsoeng J8–J9(1)		132G0279
Likokoana-hloko		–
PROFIBUS/PROFINET decoupling kit		–

1) Sheba tataiso ea ho kenya karete ea taolo bakeng sa boholo ba sebaka se koalehileng J8J9 in https://www.danfoss.com/en/products/dds/low-voltage-drives/vlt-drives/vlt-automationdrive-fc-360/#tab-overview.

3 Litlhokomelo tsa Tšireletso

Ke basebetsi ba nang le litsebo feela ba lumeletsoeng ho kenya ntho e hlalositsoeng tataisong ena ea ho instola.
Bakeng sa tlhaiso-leseling ea bohlokoa mabapi le mehato ea ts'ireletso bakeng sa ho instola, sheba tataiso ea ts'ebetso ea drive.

TLHOKOMELO

TS'ELISO NAKO Koloi e na le li-capacitor tsa DC-link, tse ka lulang li lefisoa le ha koloi e sa sebetse. Phallo e phahamengtage ka ba teng le ha mabone a sesupo sa temoso a timme. Ho hloleha ho ema nako e behiloeng kamora hore motlakase o tlosoe pele o etsa ts'ebeletso kapa mosebetsi oa tokiso ho ka baka lefu kapa kotsi e mpe. • Emisa enjene. • Hakolla li-main tsa AC, lienjene tsa mofuta oa magnete oa ka mehla, le lisebelisoa tse hole tsa DC-link, ho kenyeletsoa li-backups tsa betri, UPS, le likhokahano tsa DC-link ho li-drive tse ling. • Emela hore li-capacitor li tsoe ka botlalo. Nako e fokolang ea ho leta e hlalositsoe tafoleng Nako ea ho lahla 'me e boetse e bonahala ho nameplate e ka holim'a koloi. • Pele o etsa tshebeletso kapa mosebetsi wa tokiso, sebedisa voltagsesebelisoa sa ho lekanya ho etsa bonnete ba hore li-capacitor li lokollotsoe ka botlalo.

Ho kenya Cassette ea Taolo

Lethathamo la 2: Nako ea ho lahla

Moqtage [V]	Matla a matla [kW (hp)]	Nako e fokolang ea ho ema (metsotso)
380–480	0.37–7.5 (0.5–10)	4
380–480	11–90 (15–125)	15

4 Ho kenya Cassette ea Taolo

1. Tlosa k'hasete ea khale ea taolo. Sheba khaolo ea Kopano le Disassembly ho tataiso ea litšebeletso bakeng sa litaelo tsa ho tlosa k'hasete ea taolo.
2. Hokela k'hasete ea taolo le drive joalo ka ha ho bonts'itsoe ho Setšoantšo sa 1, o kobeha thapo joalo ka ha ho bonts'itsoe ho Setšoantšo sa 2.

Setšoantšo sa 1: Ntlha ea Khokahano ho Cassette ea Taolo

Setšoantšo sa 2: Koba Cable ea Khokahano

3. Beha khasete ea taolo koloing 'me u e thelle sebakeng sa eona joalokaha ho bontšitsoe setšoantšong sa 3.

Setšoantšo sa 3: Tsamaisa Cassette ea Taolo sebakeng

4. Fasten k'hasete ea taolo koloing u sebelisa li-screws tse 2 (tse fanoeng) joalokaha ho bontšoa ho Setšoantšo sa 4. Torque e tiisang: 0.7-1.0 Nm (6.2-8.8 in-lb).

Setšoantšo sa 4: Tiisa Li-Screw

Ntlafatso ea Software

TSEBISO

Hoa hlokahala ho nchafatsa software ho drive ha cassette e ncha ea taolo e kentsoe. Sebelisa VLT® Motion Control Tool MCT 10 hore k'hasete e ncha ea taolo e lemohuoe hantle ke drive.

1. Kgetha MCT 10 setup software ho Start menu.
2. Kgetha Beakanya bese.
3. Tlatsa data e nepahetseng fensetereng ea tlhophiso ea Serial fieldbus.
4. Tobetsa aekhone ea bese ea Scan 'me u fumane drive.
   ⇒ Drive e hlaha ho ID view.
5. Tobetsa Software upgrader.
6. Khetha oss file.
7. Ka fensetere ea puisano, tšoaea Qobella ho ntlafatsa ebe o tobetsa Qala ho ntlafatsa.
   ⇒ Firmware ea khanya.
8. Tobetsa Qetile ha ntlafatso e felile.

Danfoss A / S
Lintlha tsa 1
DK-6300 Graasten
drives.danfoss.com

---

Tlhahisoleseding efe kapa efe, ho kenyeletswa, empa e sa felle feela ho tlhahisoleseding e mabapi le kgetho ya sehlahiswa, tshebediso ya sona kapa tshebediso ya sona, moralo wa sehlahiswa, boima, boholo, boholo, bokgoni kapa datha efe kapa efe ya tekheniki e bukeng ya dihlahiswa, ditlhaloso tsa manane a dipapatso, jj. le hore na di fumaneha ka mongolo. , ka molomo, ka mokhoa oa elektronike, inthaneteng kapa ka mokhoa oa ho jarolla, e tla nkoa e le tsebo, 'me e tlama feela haeba, ho fihlela moo, ho etsoa litšupiso tse hlakileng khotheishene kapa netefatso ea taelo. Danfoss e ke ke ea amohela boikarabello bofe kapa bofe bakeng sa liphoso tse ka bang teng ho li-catalogs, libukana, livideo le lisebelisoa tse ling. Danfoss e na le tokelo ea ho fetola lihlahisoa tsa eona ntle le tsebiso. Sena se sebetsa le ho lihlahisoa tse otarang empa li sa tlisoa ha feela liphetoho tse joalo li ka etsoa ntle le liphetoho sebopeho, ho lekana kapa tšebetso ea sehlahisoa. Matšoao 'ohle a thepa ena ke thepa ea lik'hamphani tsa Danfoss A/S kapa tsa Danfoss. Danfoss le logo ea Danfoss ke matšoao a khoebo a Danfoss A/S. Litokelo tsohle li sirelelitsoe.

MI06C

---

Danfoss A/S © 2024.06

132R0208

AN361179840392en-000401 / 132R0208

Litokomane / Lisebelisoa

Danfoss FC 360 Control Cassette Controller [pdf] Tlhophiso Tataiso FC 360, FC 360 Controller Cassette Controller, Control Cassette Controller, Cassette Controller, Controller

Litšupiso

• Bukana ea Mosebelisi