EKE 347 Molaoli oa Boemo ba Mokelikeli
Tataiso ea ho Kena 
Melao-motheo ea Taolo ea Boemo ba Mokelikeli
Setšoantšo sa 3a:
PHAKOANE
| Tlhophiso ea tsamaiso | ICAD |
| Molao-motheo o laolang | Tlase |
| Ho hlophisoa ha Letšoao la Boemo | AKS4100 |
Setšoantšo sa 3b:
PHAKOANE
| Tlhophiso ea tsamaiso | AKV/A |
| Molao-motheo o laolang | Tlase |
| Ho hlophisoa ha Letšoao la Boemo | AKS4100 |
Setšoantšo sa 3c:
PHAKOANE
| Tlhophiso ea tsamaiso | AKV/A |
| Molao-motheo o laolang | Tlase |
| Ho hlophisoa ha Letšoao la Boemo | AKS4100 |
Setšoantšo sa 3d:
PHAHAMENG
| Tlhophiso ea tsamaiso | AKV/A |
| Molao-motheo o laolang | Phahameng |
| Ho hlophisoa ha Letšoao la Boemo | AKS4100 |
Likamano tse hlokahalang (sa feiga. 4, 5 le 6)
Boemelo:
28-29 Phepelo voltage 24 V ac kapa dc 1-7 Letšoao ho tsoa ho mofuta oa transmitter oa boemo AKS 4100/4100U kapa 7-10 Letšoao ho tsoa ho mofuta oa transmitter oa boemo ba AKS 41
36-37 mofuta oa valve ea ho atolosa AKV kapa AKVA (sheba molaetsa ka ho le letona) kapa
23-24 Mofuta oa valve ea ho atolosa: ICM e nang le ICAD 13-14 Switch function bakeng sa ho qala / ho emisa molaoli. Haeba switjha e sa hokeloa, litheminale 13 le 14 li tlameha ho khutsufatsoa.
Lihokelo tse itšetlehileng ka kopo (setšoantšo sa 4, 5 le 6)
Boemelo:
33-35 Relay bakeng sa alamo e tloaelehileng. Sehlomathisi se ka khetha pakeng tsa li-circuits tsa Normally Open (33-34) kapa tse koetsoeng ka tloaelo (34-35). Relay e tla fetoha ho latela maemo a hlophisitsoeng.
25-27 Relay bakeng sa moeli oa boemo bo tlase. Sesebelisoa se ka khetha lipakeng tsa li-circuits tsa Normally Open (26-27) kapa tse koetsoeng ka tloaelo (25-26). Relay e tla fetoha ha boleng bo behiloeng bo fetisitsoe.
30-32 Relay bakeng sa moeli oa boemo bo holimo. Sehlomathisi se ka khetha pakeng tsa li-circuits tsa Normal Open (30-31) kapa tse koetsoeng ka tloaelo (31-32). Relay e tla fetoha ha boleng bo behiloeng bo fetisitsoe.
6-10 Letšoao la maikutlo la valve ea ICM ho tloha ho ICAD 0/4-20 mA
Hlokomela!
Haeba AKV(A) e sebelisoa, phepelo ea motlakase e tlameha ho koahela AKV(A) coil wattage eketsehileng (sheba feiga. 5). AKV(A) Coil voltage tlameha ho tšoana le phepelo ea motlakase voltage AC kapa DC.
tlhophiso ea MASTER/LAVE le I/O (setšoantšo sa 7b le 7c) Ha balaoli ba bangata ba hokahantsoe ka bese ea CAN pheletsong e 'ngoe le e 'ngoe ea bese e tlameha ho emisoa ka jumper lipakeng tsa 15 le 16.
Sehlopha sa Taolo (setšoantšo sa 8)
Sehokelo sa mosebelisi sa phanele ea taolo se na le ponts'o ea li-multiline le likonopo tse 4 tsa motho ka mong: Kena konopo, konopo ea Leqephe holimo, konopo ea Leqephe tlase, le konopo ea Morao.
Setšoantšo sa 8 se bonts'a setšoantšo sa ponts'o ea Lehae, se fanang ka 'nete ea ho fetaview. Ena ke sebaka sa ho qala ho kena ho menu, 'me u tla khutlela setšoantšong sena ka ho sututsa 
1 - 3 makhetlo a itšetlehileng ka boemo ba sebele).
Pontšo (sa feiga. 9)
Pontšo ka boeona e bonts'a boemo ba boemo ba Mokelikeli, Mokhoa oa Controller (controller On/ Off), tekanyo ea ho bula li-valve, alamo ea boemo bo tlaase (ho = ha ho alamo e teng) le ka holimo.
alamo ea boemo (e tima = ha ho alamo e teng).
Ho ekelletsa mehloling ea kantle ea alamo e hokahantsoeng ea audio/video, letšoao la Bell le tla benya hukung e kaholimo ho le letona haeba ho ka hlaha alamo.
Ho bona lintlha tse ling mabapi le ts'ebetso ea sistimi le ho hlophisoa ha li-parameter, maemo a 2 a mantlha a ka fihlelleha ka ts'ebetso ea likonopo tsa push.
Li-menu
Keno ea menyetla (sheba feiga 10) Ho tsoa ho Setšoantšo sa Lehae, menu ea boemo bo ka fihlelleha ka ho tobetsa hang
. Ho tsoa ho Setšoantšo sa Lehae, menu ea Setupo le lits'ebeletso e ka fihlelleha ka ho sutumetsa hang feela ebe o tobetsa . Bakeng sa ho kena, ho kena ho hlokeha ka password e fanoeng nakong ea ho laela.
Boemo ba paramethara (mokhoa oa ho bala/ho ngola) Ha o tsamaisa ho Seta & menyu ea lits'ebeletso kapa menyu ea Boemo ho na le mohopolo o akaretsang oa ho bonts'a liketso tse ka bang teng bakeng sa paramethara ka 'ngoe. Sengoliloeng se hlakileng: E baloa feela
Mongolo o hlophisitsoeng:
Parameter e ka fetoloa - sutumelletsa ho totobatsa. 
Mongolo o totobalitsoeng:
Tsamaisetsa ka
/ 
ho kgetho e batloang le ho sututsa ho kenya kgetho. Hang ha e kentsoe, paramethara e nepahetse, 'me mongolo o fetoha mongolo o hlophisitsoeng.
Lenaneo la boemo
Ho kenya Status menu ho tsoa setšoantšong sa Lehae:
Sututsa hang.
Lethathamo la Boemo ke menu e bulehileng e fumanehang ho bohle. Ka hona, ke parameter e le 'ngoe feela e ka fetoloang ho tloha mona. Khetho ea li-parameter tse ling e ka bonoa ho tsoa ho menu ea boemo:
Lenane la boemo (Bula menu)
| Dikgetho | |
| Boemo | |
| Sebaka sa boemo ba mokelikeli | 0 - 100% |
| Lialamo tse sebetsang Example ea litaba tsa alamo. Lenane le tla be le se na ts'ebetso e tloaelehileng kaha ha ho alamo e sebetsang. |
|
| Letšoao la boemo ha le lekane | lihora metsotso |
| Boemo ba standby | lihora metsotso |
| Boemo bo qaqileng | |
| Boemo ba molaoli | Emisa, Manual, Auto, Slave, IO |
| Boemo ba sebele | 0.0 - 100% |
| Referense ea 'nete | 0.0 - 100% |
| OD ea sebele | 0.0 - 100% |
| Boemo ba ho kenya dijithale | E felile / E felile |
| Boemo ba hona joale ba lets'oao | mA |
| Ho khaotsa amptsebo | 0.0 - 100% |
| Nako ea oscillation | mots |
| Boitsebiso ba molaoli | |
| Mofuta | |
| Lebitso (Lebitso la molaoli) | |
| SW (Mofuta oa software) | |
| Bios (mofuta oa Bios) | |
| Adr (Aterese ea molaoli) | |
| SN (Nomoro ea Seriale) | |
| PV (Mofuta oa sehlahisoa) | |
| Sebaka (sebaka sa tlhahiso) | |
| QR khoutu | |
| Khoutu | |
| Bala & Ngola |
| Bala feela |
(E hloka phasewete ea ho kena e fanoeng ka har'a menu ea Commisioning)
Ho kenya Setupo le menu ya tshebeletso ho tswa ho Setshwantsho sa Lehae: Sututsa o hatelle .
Ho tsamaisa ho "Status" le "Setup" le "menu" ea lits'ebeletso li etsoa ka ho sebelisa likonopo tse 4 tse bontšitsoeng ho feiga. 8.
Lenaneo la Setupo le tshebeletso le arotswe ka maemo a 3 a phihlello, moo basebetsi ba nang le matla a motho ka mong.
Boemo bo tsoetseng pele ka ho fetesisa ke Komisi, moo o ka khonang ho fetola liparamente tsohle tse lumelletsoeng, ho kenyeletsoa ho fana ka li-password le ho qala hape ha Setup wizate. Phasewete ea kamehla ea ho etsa kopo ke 300.
Tshebeletso boemo ke ba basebeletsi ba litšebeletso 'me bo na le litokelo tse fokolang ho feta ho laela. Phasewete ea kamehla ke 200. Boemo bo tlaase ka ho fetisisa ke ba Tšebeliso ea Letsatsi le Letsatsi 'me e lumella liphetoho tse seng kae feela. Phasewete ea kamehla ke 100.
Tafole e ka tlase e bonts'a matla a fuoeng maemo a 3.
Menu ea ho seta le ea litšebeletso (E hloka ho Kena. Lekunutu le tla abeloa ho menu ea Khomishene)
| Paramethara | Dikgetho | Boemo ba mosebedisi – phihlello | Ea kamehla litekanyetso | |||
| Letsatsi le letsatsi | Tshebeletso | Ho laela | ||||
| Referense | Phetoho e kholo | Bulehile, Tima | RW | RW | RW | E tima |
| Sebaka sa boemo ba mokelikeli | 0 - 100% | RW | RW | RW | 50.0% | |
| Mokhoa oa ts'ebetso | Monghali, IO, Lekhoba | R | R | RW (L) | Monghadi | |
| Tlhophiso ea alamo | Moeli oa boemo bo tlase | 0 - 100% | RW | RW | RW | 15% |
| Moeli oa boemo bo holimo | 0 - 100% | RW | RW | RW | 85% | |
| Boemo ba alamo | Nako, Hysteresis | R | R | RW | Nako | |
| Ho lieha ho tlase | 0 - 999 sec | R | RW | RW (D) | 10 metsotsoana | |
| Ho lieha ho holimo | 0 - 999 sec | R | RW | RW (D) | 50 metsotsoana | |
| Hysteresis ea boemo bo tlase | 0-20 % | R | RW | RW (D) | 3% | |
| Hysteresis ea boemo bo holimo | 0-20 % | R | RW | RW (D) | 5% | |
| Alamo e sebetsang e tloaelehileng | Eseng ho latela; Tšalo-morao; Latela tlase; Latela bohle | R | R | RW | Eseng ho latela | |
| Sehlopha sa ho lemoha oscillation | 0 - 100% | R | RW | RW (D) | 100% | |
| Oscillation e lemoha nako e felile | 2 - 30 mets | R | RW | RW (D) | 20 mets | |
| Qobella pompo HO TLOHA boemong ba ho emisa | Ee / Che | R | RW | RW | Che | |
| IO Moeli oa boemo bo tlase | 0 - 100% | RW | RW | RW (D) | 5% | |
| IO Moeli oa boemo bo holimo | 0 - 100% | RW | RW | RW (D) | 95% | |
| IO Hysteresis ea boemo bo tlase | 0-20 % | R | RW | RW (D) | 3% | |
| IO hysteresis ea boemo bo holimo | 0-20 % | R | RW | RW (D) | 3% | |
| IO Ho lieha ho tlase | 0 - 999 sec | R | RW | RW (D) | 10 metsotsoana | |
| IO Ho lieha ho holimo | 0 - 999 sec | R | RW | RW (D) | 50 metsotsoana | |
| Moeli oa boemo ba IO | 0 - 100% | R | RW | RW (D) | 50% | |
| Ho lieha ha boemo ba IO | 0 - 999 sec | R | RW | RW (D) | 10 metsotsoana | |
| IO Level hysteresis | 0-20 % | R | RW | RW (D) | 3% | |
| Ketso ea boemo ba IO | Ho oa, Ho phahama | R | RW | RW (D) | Ho wela | |
| Taolo | Mokhoa oa ho Laola | On/Off ,P, PI | R | RW | RW | PI |
| Molao-motheo o laolang | Tlaase, Holimo | R | RW | RW | Tlase | |
| Sehlopha sa P | 5 - 200% | R | RW | RW (D) | 30.0% | |
| Nako ea ho kopanya Tn | 60 - 600 sec | R | RW | RW (D) | 400 metsotsoana | |
| Sebaka se sa nke lehlakore | 0 - 25% | R | RW | RW (D) | 2.0% | |
| Phapang | 0,5-25% | R | RW | RW (D) | 2% | |
| Nako ea nako ea AKV/AKVA | 3-15 set lao | R | RW | RW (D) | 6 metsotsoana | |
| Bonyane OD | 0 - 99% | R | RW | RW (D) | 0% | |
| Boholo ba OD | 1 - 100% | R | RW | RW (D) | 100% | |
| Pontšo | Puo | EN,CN,PT,RU,SP,FR,IT,GER, ARAB | R | RW (L) | RW (L) (D) | EN |
| Pontsho ya dipoelo | boemo, OD | R | RW | RW (D) | Boemo | |
| Nako ea ho kena e felile | 0 - 120 mets | R | RW | RW | 10 mets | |
| Backlight nako e felile | 0 - 120 mets | RW | RW | RW | 2 mets | |
| Password letsatsi le letsatsi | Linomoro tse 3, 0 - 999 | N/A | N/A | RW | 100 | |
| Tšebeletso ea password | Linomoro tse 3, 0 - 999 | N/A | N/A | RW | 200 | |
| Khomishene ea password | Linomoro tse 3, 0 - 999 | N/A | N/A | RW | 300 | |
| Sebopeho sa IO | Tlhophiso ea tsamaiso | ICAD+NC, ICAD, AKV/A+NC, AKV/A, NC feela | R | R | RW (L) | ICAD + NC |
| Ho seta letshwao la boemo | AKS 4100, AKS 41, Hajoale, Moqtage | R | R | RW (L) | AKS4100 | |
| Moqtage boemong ba mokelikeli o tlase | 0-10V | R | RW | RW (D) | 0 V | |
| Moqtage boemong ba mokelikeli o phahameng | 0-10V | R | RW | RW (D) | 10 V | |
| Hajoale boemong bo tlase ba mokelikeli | 0-20 mA | R | RW | RW (D) | 4 mA | |
| Hajoale e maemong a phahameng a mokelikeli | 0-20 mA | R | RW | RW (D) | 20 mA | |
| Tlhophiso ea boemo ba valve | Ha e sebelisoe, Hona joale, Moqtage | R | R | RW (L) | Ha e sebelisoe | |
| Moqtage sebakeng sa valve se koetsoeng | 0-10V | R | RW | RW (D) | 0 V | |
| Moqtage sebakeng se bulehileng sa valve | 0-10V | R | RW | RW (D) | 10 V | |
| Hona joale sebakeng se koetsoeng sa valve | 0-20 mA | R | RW | RW (D) | 4 mA | |
| Hona joale sebakeng se bulehileng sa valve | 0-20 mA | R | RW | RW (D) | 20 mA | |
| Tlhophiso e tloaelehileng ea alamo | D04, alamo e phahameng, D03, Disp feela | R | R | RW (L) | Alamo e phahameng | |
| Ho theha li-valve tse ngata | Ha e sebelisoe, 2 cap, 2 dif cap, 3 tšoanang cap, 3 dif cap | R | R | RW (L) | Ha e sebelisoe | |
| Paterone ea li-valve tse ngata | Phapang, Tatelano | R | R | RW (D) | Bapisa | |
| Bokhoni ba Valve A | 0-100 % | R | R | RW (L) (D) | 50% | |
| Bokhoni ba valve B | 0-100 % | R | R | RW (L) (D) | 50% | |
| Bokhoni ba Valve C | 0-100 % | R | R | RW (L) (D) | 30% | |
| ICAD e nka OD | 0-100% | R | RW | RW (D) | 80% | |
| Ho hlophisoa ha module oa IO | E sebelisoa, ha e sebelisoe | R | R | RW (L) (D) | Ha e sebelisoe | |
| Puisano | KA ID | 1 - 127 | R | R | RW | 1 |
| E KA baudrate | 20k, 50k, 125k, 250k, 500k, 1M | R | R | RW | 500k | |
| ID ea Modbus | 0 - 120 | R | R | RW | 1 | |
| Sekhahla sa Modbus baud | 0, 1200, 2400, 4800, 9600, 14400, 19200, 28800, 38400 | R | R | RW | 19200 | |
| Mokhoa oa Modbus | 8N1, 8E1, 8N2 | R | R | RW | 8N1 | |
| 'Mapa oa Modbus | Ts'ebetso, ho hlophisoa | R | R | RW | Tshebetso | |
| Velve B KA KENA ID | 1 - 127 | R | R | RW (D) | 2 | |
| Valve E KA KENA ID | 1 - 127 | R | R | RW (D) | 3 | |
| Mokhoa oa IO KA ID | 1 - 127 | R | R | RW (D) | 4 | |
| Paramethara | Dikgetho | Boemo ba mosebedisi – phihlello | Ea kamehla litekanyetso | |||
| Letsatsi le letsatsi | Tshebeletso | Ho laela | ||||
| Tshebeletso | Boemo ba molaoli | R | R | R | - | |
| Boemo ba sebele | R | R | R (D) | - | ||
| Referense ea 'nete | R | R | R (D) | - | ||
| OD ea sebele | R | R | R (D) | - | ||
| Sebaka sa sebele sa valve | R | R | R (D) | |||
| Boemo ba ho kenya dijithale | R | R | R (D) | - | ||
| Letšoao la boemo ba sebele voltage | R | R | R (D) | |||
| Letšoao la boemo ba sebele hona joale | R | R | R (D) | - | ||
| Letšoao la boemo ba sebele voltage | R | R | R (D) | |||
| Letšoao la boemo ba hona joale | R | R | R (D) | |||
| Ehlile OD A | R | R | R (D) | |||
| Ehlile OD B | R | R | R (D) | |||
| Ehlile OD C | R | R | R (D) | |||
| Mokhoa oa Manual | Bulehile, Tima | R | RW | RW (D) | E tima | |
| Bukana ea OD | 0 - 100% | R | RW | RW (D) | 50.0% | |
| Alamo e tlase ea letsoho | Off-On | R | RW | RW (D) | E tima | |
| Alamo e phahameng ea letsoho | Off-On | R | RW | RW (D) | E tima | |
| Alamo e tloaelehileng ka letsoho | Off-On | R | RW | RW (D) | On | |
| Sebetsa kamehla | Ha ho letho, Feme | N/A | N/A | RW (D) | Ha ho letho | |
| Seta wizate | Seta wizate | Kenya hape Setupo wizate | N/A | N/A | RW | - |
| Ke/O hlahloba | Ketso e kholo ea EKE: | Kwetswe - Buletswe | R | R | R | E tima |
| AKS 4100 EKE ketso: | 0 - 20 mA | R | R | R (D) | - | |
| Ketso ea ICAD EKE: | 4 - 20 mA | R | R | R (D) | - | |
| Leha ho le joalo. Koala (NC) EKE ketso: | Kwetswe - Buletswe | R | R | R (D) | - | |
| Upper lvl (alarm) EKE ketso: | Kwetswe - Buletswe | R | R | R (D) | - | |
| Lower lvl (alarm) EKE ketso: | Kwetswe - Buletswe | R | R | R (D) | - | |
| Molaoli lebitso | Lebitso la molaoli | Ngola lebitso la molaoli | RW | RW | RW | - |
Mosebetsi oa EKE 347 Alarm-Relay
Ho qala ka lekhetlo la pele
(Setupo wizate)
Ha likhokahano tsohle ho molaoli li se li entsoe, ho qalisoa ha lekhetlo la pele ho ka etsoa.
Kamora ho bulela matla, logo ea Danfoss e tla hlaha metsotsoana e 5. Wizate ea ho seta e tla qala.
Nakong ea wizate ea ho seta, tatellano e latelang e tlameha ho phetoa bakeng sa litlhophiso tsohle tsa parameter:
a) Lebitso la Parameter + Khetho ea 1
b) Tobetsa ho totobatsa 1 khetho
c) Tsamaisetsa ka/ho ea ho khetho eo u e batlang.
d) Tobetsa ho beha khetho ea hau tseba
e) Tsamaisetsa ho paramethara e latelang pheta tatellano ea a ho e)
- Puo
U ka khetha leha e le efe ea lipuo tsena tse 9: Senyesemane, Sechaena, Sepotoketsi, Serussia, Sepanishe, Sefora, Setaliana, Sejeremane, Searabia. - Tlhophiso ea tsamaiso Khetha efe kapa efe ea litlhophiso tsena tse 5 tse boletsoeng esale pele:
ICAD + NC(solenoid) NC(solenoid) AKV/A AKV/A + NC(solenoid) ICAD - Mokhoa oa ts'ebetso
Khetha leha e le efe ea mekhoa ena e 3 e boletsoeng esale pele: Monghali (EKE 347 e le Master controller) IO (EKE 347 as In/Out module) Lekhoba (EKE 347 e le lekhoba la Monghali e mong - Molao-motheo o laolang
Khetha e 'ngoe ea melao-motheo e 2 e Tlase Holimo - Sebaka sa boemo ba mokelikeli
Ngola boemong bofe kapa bofe ho tloha ho 0% ho isa ho 100% (ka ho feletseng ke 50.0%) 50.0% - Moeli oa boemo bo tlase
Ngola moeli ofe kapa ofe ho tloha ho 0% ho isa ho 100% (ka ho feletseng ke 15%) 15% - Moeli oa boemo bo holimo
Ngola moeli ofe kapa ofe ho tloha ho 0% ho isa ho 100% (ka ho feletseng ke 85%) 85% - Ho seta letshwao la boemo
Khetha e 'ngoe ea litlhophiso tsena tse 4 tse boletsoeng esale pele:
AKS4100
Moqtage
Hona joale
AKS41 - Ho theha maikutlo a valve
Khetha e 'ngoe ea tsena tse 3 tse hlalositsoeng esale pele (maikutlo a li-valve a khoneha feela ka ICAD):
Ha e sebelisoe
Moqtage
Hona joale - Tlhophiso e tloaelehileng ea alamo
Khetha e 'ngoe ea mekhoa ena e 4 e boletsoeng esale pele:
Alamo e Phahameng
D04
Disp feela (letshwao la Bell feela le benya)
D03 - Kenya li-setting tsa wizate
Tobetsa ho netefatsa dikenyo tsohle kapa Tobetsa ho kgutlela ho menu ya ho qetela
Hang ha ho kenngoa ha data ho netefalitsoe, molaoli o na le data e lekaneng ho etsa taolo e tšoanelehang ea tsamaiso ea hau.
Joale u botsoa hore u khethe e 'ngoe ea tsona
menyetla. Menu e kholo hlahlobisisa I/O
Tobetsa bakeng sa ho fihlella Setup & ditshebeletso menu ya kapa tobetsa Makhetlo a 2 bakeng sa ho fihlella sets'oants'o sa lapeng. Haeba ka lebaka le itseng ho hlokahala ho hlakola wizate ea ho seta hape, sena se ka khoneha ka ho kena ho setup & menu ea litšebeletso le bolaoli ba ho laela.
Likhoutu tsa alamo le liphoso:
Ha o bona alamo ho tsoa mehloling e kantle kapa tšepe e benyang ponts'o, tlhaloso ea alamo e ka fumanoa e le molaetsa oa mongolo ho "Status" tlasa Active.
alamo.
Lialamo le liphoso li tla bontšoa mona. Haeba lialamo/liphoso tse ling li etsahala ka nako e le 'ngoe, li tla bontšoa e le mela ea mongolo e latelang.
| Dialamo: |
| Boemo bo phahameng |
| Boemo bo tlase |
| Boemo ba standby |
| Khohlano ea ID ea Valve B CAN |
| Balofo E KA KONA Khohlano ea ID |
| Mojule oa IO O KA KONA Khohlano ea ID |
| puisano ea module ea IO |
| Puisano ho master e lahlehile |
| Khohlano ea bonyane/max OD |
| Alamo e tloaelehileng ea likhohlano tsa HW |
| Khohlano ea mokhoa oa ho laola |
| Khohlano ea ho seta li-valve tse ngata |
| Alamo ea Valve C |
| Alamo ea valve ea B |
| Ho sisinyeha ha lets'oao la boemo |
| Boemo ba valve |
| Bokhoni ba li-valve tse ngata |
| Puisano ea Valve C |
| Puisano ea valve B |
| Liphoso: |
| Phoso ea ka hare |
| Letšoao la boemo ha le lekane |
| Letšoao la boemo ba valve ha le na sebaka |
| Sensor phepelo e feteletseng |
| AKS 4100 phoso |
| AI3 ea hajoale e ngata haholo |
| AI4 ea hajoale e ngata haholo |
| DO4 e tletse |
Danfoss A / S
Litharollo tsa Boemo ba Leholimo
- danfoss.com
- +45 7488 2222
Tlhahisoleseding efe kapa efe, ho kenyeletswa, empa e sa felle feela ho tlhahisoleseding e mabapi le kgetho ya sehlahiswa, tshebediso ya sona kapa tshebediso ya sona, moralo wa sehlahiswa, boima, boholo, bokgoni kapa datha efe kapa efe ya tekheniki e dipukung tsa sehlahiswa, ditlhaloso tsa manane a dikhatiso, dipapatso, jj le hore na di fumaneha ka mongolo. , ka molomo, ka mokhoa oa elektronike, inthaneteng kapa ka ho khoasolla, e tla nkoa e le tsebo 'me e tlama feela haeba, ho isa boholeng boo, ho etsoa litšupiso tse hlakileng khotheishene kapa netefatso ea taelo. Danfoss e ke ke ea amohela boikarabelo leha e le bofe bakeng sa liphoso tse ka bang teng libukeng tsa libuka, libukana, livideo le lintho tse ling. Danfoss e na le tokelo ea ho fetola lihlahisoa tsa eona ntle le tsebiso. Sena se sebetsa le ho lihlahisoa tse otarang empa li sa tlisoa ha feela liphetoho tse joalo li ka etsoa ntle le liphetoho sebopeho, ho lekana kapa tšebetso ea sehlahisoa.
Matšoao 'ohle a thepa ena ke thepa ea lik'hamphani tsa Danfoss A/S kapa tsa Danfoss. Danfoss le logo ea Danfoss ke matšoao a khoebo a Danfoss A/S. Litokelo tsohle li sirelelitsoe.
Litokomane / Lisebelisoa
 |
Danfoss EKE 347 Liquid Level Controller [pdf] Tlhophiso Tataiso EKE 347, Mookameli oa Boemo ba Mokelikeli, Mookameli oa Boemo, EKE 347, Mookameli |
