Danfoss EKC 367 Media Temperature Controller
Molao-motheo
Litekanyo
Bolelele ba thapo/ karolo ya sefapano sa terata
Bolelele ba thapo bakeng sa actuator. Actuator e tlameha ho fuoa 24 V ac ± 10%. Ho qoba matla a feteletsengtagho lahleheloa ke thapo ho actuator, sebelisa mohala o motenya bakeng sa libaka tse kholo. Haeba valve ea KVQ e behiloe e rapame, bolelele bo khuts'oane ba cable bo lumelloa ho feta ha e behiloe e eme. Ha ea lokela ho hlongoa e paqame e amana le hotgas defrost haeba mocheso o pota-potileng KVQ-valve o ka tlase ho 0°C.
Khokahano
Puisano ya data
Lihokelo
Likamano tse hlokahalang
Boemelo:
- 25-26 Phepelo voltage 24V ac
- 17-18 Letšoao le tsoang ho actuator (ho tloha NTC)
- 23-24 Phepelo ho actuator (ho PTC)
- 20-21 Pt 1000 sensor sebakeng sa mouoane
- 1-2 Phetoho ea tšebetso bakeng sa ho qala/ho emisa ha taolo. Haeba ho fetoha
ha e kopane, li-terminals 1 le 2 li tlameha ho khutsufatsoa. Lihokelo tse itšetlehileng ka kopo
Theminale:
12-13 Molaetsa oa alamo
Ho na le kamano pakeng tsa 12 le 13 maemong a alamo le ha molaoli a shoele
- 6-7 Relay switch bakeng sa ho qala/ho emisa ho defrost
- 8-10 Relay switch bakeng sa ho qala / ho emisa fan
- 9-10 Relay switch bakeng sa ho qala/ho emisa ho pholile
- 18-19 Moqtage tsoa ho melaoana e meng (Ext.Ref.)
- 21-22 Pt 1000 sensor bakeng sa ts'ebetso ea defrost.
Potoloho e khuts'oane ea li-terminals bakeng sa metsotsoana e 'meli (letšoao la pulse) e tla qala ho putlama
3-4 Puisano ea data
Mount feela, haeba mojule oa puisano ea data o kentsoe. Ke habohlokoa hore ho kenngoa ha thapo ea puisano ea data ho etsoe ka nepo. Cf. lingoliloeng tse arohaneng No. RC.8A.C...
Tshebetso
Pontšo
Litekanyetso li tla bontšoa ka linomoro tse tharo, 'me ka tlhophiso u ka tseba hore na mocheso o lokela ho bontšoa ho °C kapa °F.
Li-diode tse hlahisang leseli (LED) ka phanele e ka pele
Ho na le li-LED ka phanele e ka pele e tla bonesa ha relay ea thepa e kentsoe tšebetsong. Li-LED tse tharo tse tlase haholo li tla benya, haeba ho na le phoso taolong. Boemong bona, o ka kenya khoutu ea phoso skrineng ebe o hlakola alamo ka ho tobetsa konopo e kaholimo ho hang.
| Mookameli a ka fana ka melaetsa e latelang: | ||
| E1 |
Molaetsa oa phoso |
Liphoso ho molaoli |
| E7 | Sair ea khaotsoeng | |
| E8 | Shortcircuited Sair | |
| E11 | Thempereichara ea actuator ea valve ka ntle ho eona
mefuta-futa |
|
| E12 | Letšoao la ho kenya analoge le kantle ho sebaka | |
| A1 |
Molaetsa oa alamo |
Alamo ea mocheso o phahameng |
| A2 | Alamo ea mocheso o tlase | |
Likonopo
Ha u batla ho fetola litlhophiso, likonopo tse peli li tla u fa boleng bo holimo kapa bo tlase ho latela konopo eo u e tobetsang. Empa pele o fetola boleng, o tlameha ho fihlella ho menu. U fumana sena ka ho tobetsa konopo e kaholimo metsotsoana e 'maloa - ebe u kenya kholomo ka likhoutu tsa paramethara. Fumana khoutu ea parameter eo u batlang ho e fetola 'me u tobetse likonopo tse peli ka nako e le ngoe. Ha o fetotse boleng, boloka boleng bo bocha ka ho tobetsa hape likonopo tse peli ka nako e le 'ngoe
Examplikarolo tsa ts'ebetso
Beha mocheso oa litšupiso
- Tobetsa likonopo tse peli ka nako e le 'ngoe
- Tobetsa e 'ngoe ea likonopo ebe u khetha boleng bo bocha
- Tobetsa likonopo ka bobeli hape ho phethela maemo
Beha e 'ngoe ea li-menu tse ling
- Tobetsa konopo e ka holimo ho fihlela parameter e bonts'oa
- Tobetsa e 'ngoe ea likonopo 'me u fumane parameter eo u batlang ho e fetola
- Tobetsa likonopo ka bobeli ka nako e le 'ngoe ho fihlela boleng ba parameter bo bontšoa
- Tobetsa e 'ngoe ea likonopo ebe u khetha boleng bo bocha
- Tobetsa likonopo ka bobeli hape ho phethela maemo
| Mosebetsi | Para- metara | Min. | Max. |
| Pontsho e tlwaelehileng | |||
| E bonts'a mocheso ka sensor ea kamore | – | °C | |
| Fana ka konopo e ka tlaase e khutšoanyane ho tobetsa ho bona
mocheso ho sensor ea defrost |
– | °C | |
| Referense | |||
| Beha mocheso o hlokahalang oa kamore | – | -70°C | 160°C |
| Mocheso oa mocheso | r05 | °C | °F |
| Tlatsetso ea kantle ho litšupiso | r06 | -50 K | 50 K |
| Tokiso ya letshwao le tswang ho Sair | r09 | -10,0 K | 10,0 K |
| Tokiso ea lets'oao le tsoang ho Sdef | r11 | -10,0 K | 10,0 K |
| Ho qala/ho emisa sehatsetsing | r12 | TLOA | On |
| Alamo | |||
| Phapang e kaholimo (kaholimo ho boemo ba mocheso) | A01 | 0 | 50 K |
| Phapang e tlase (ka tlase ho maemo a mocheso) | A02 | 0 | 50 K |
| Ho lieha ha nako ea alamo | A03 | 0 | 180 mets |
| Kheloha | |||
| Mokhoa oa ho thella (ELECTRICITY/GAS) | d01 | tima | KHASE |
| Defrost setopong mocheso | d02 | 0 | 25°C |
| Max. defrost nako | d04 | 0 | 180 mets |
| Nako ea ho phomola | d06 | 0 | 20 mets |
| Ho lieha ho qala kapa ho fifala ha fan | d07 | 0 | 20 mets |
| Mocheso o qalang oa fene | d08 | -15 | 0°C |
| Fene e kenella nakong ea serame (e / che) | d09 | che | ho joalo |
| Ho lieha ha alamo ea mocheso ka mor'a ho qhibiliha | d11 | 0 | 199 mets |
| Liparamente tse laolang | |||
| Actuator max. mocheso | n01 | 41°C | 140°C |
| Actuator min. mocheso | n02 | 40°C | 139°C |
| Mofuta oa actuator (1=CVQ-1 ho isa ho 5 bar, 2=CVQ 0 ho isa ho 6 bar,
3=CVQ 1.7 ho isa ho 8 bar, 4= CVMQ, 5=KVQ) |
n03 | 1 | 5 |
| P: Ampntlha ea bohlokoa Kp | n04 | 0,5 | 20 |
| I: Nako ea ho kopanya Tn (600 = tima) | n05 | 60 s | 600 s |
| D: Nako ea phapang Td (0 = tima) | n06 | 0 s | 60 s |
| Ketsahalo ea nakoana 0: Ho pholile ka potlako
1: Ho pholisa ka ho fokotseha ho fokolang 2: Ho pholisa moo underswing e sa batloeng |
n07 |
0 |
2 |
| Nako ea ho qala ka mor'a hore hotgas e fokotsehe | n08 | 5 mets | 20 mets |
| Tse fapaneng | |||
| Aterese ea molaoli | o03* | 1 | 60 |
| ON/OFF switch (molaetsa oa pini ea tšebeletso) | o04* | – | – |
| Hlalosa lets'oao la ho kenya letsoho la analog 0: ha ho na lets'oao
1: 0 - 10 V 2: 2 - 10 V |
o10 |
0 |
2 |
| Puo (0=senyesemane, 1=Sejeremane, 2=Sefora,
3=Sedanishe, 4=Sepanish, 5=Setaliana, 6=Seswedishe) |
011* | 0 | 6 |
| Seta phepelo voltage maqhubu | o12 | 50 Hz | 60 Hz |
| Tshebeletso | |||
| Bala mocheso ho sensor ea Sair | u01 | °C | |
| Bala regulation reference | u02 | °C | |
| Bala mocheso oa li-valve tsa actuator | u04 | °C | |
| Bala tšupiso ea mocheso oa valve ea actuator | u05 | °C | |
| Bala boleng ba kantle voltagt pontšo | u07 | V | |
| Bala mocheso ho sensor ea Sdef | u09 | °C | |
| Bala boemo ba ho kenya DI | u10 | ho/ tima | |
| Bala nako ea defrost | u11 | m | |
*) Tlhophiso ena e tla khonahala feela haeba mojule oa puisano ea data o kentsoe ho molaoli.
Boemo ba feme
Haeba o hloka ho khutlela ho boleng ba feme-set, e ka etsoa ka tsela ena:
- Khaola matla a phepelotage ho molaoli
- Boloka likonopo ka bobeli li tepeletse ka nako e le 'ngoe ha u ntse u hokahanya matla a phepelotage
Qaleho ea molaoli
Ha lithapo tsa motlakase li hoketsoe ho molaoli, lintlha tse latelang li tlameha ho hlokomeloa pele molao o qala:
- Tlosa sesebelisoa sa kantle sa ON/OFF se qalang le ho emisa taolo.
- Latela tlhahlobo ea menu 'me u behe li-parameter tse fapaneng ho litekanyetso tse hlokahalang.
- Fetola sesebelisoa sa kantle sa ON/OFF, 'me molao o tla qala.
- Haeba tsamaiso e kentsoe valve ea ho atolosa thermostatic, e tlameha ho behoa ho mocheso o fokolang o tsitsitseng. (Haeba T0 e itseng e hlokeha bakeng sa phetoho ea valve ea ho atolosa, litekanyetso tse peli tsa ho beha mocheso oa actuator (n01 le n02) li ka behoa ho boleng bo lekanang ha ho etsoa phetoho ea valve ea ho atolosa. Hopola ho tsosolosa litekanyetso.
- Latela mocheso oa kamore ea sebele skrineng. (Sebelisa mokhoa oa ho bokella lintlha, haeba u rata, e le hore u ka latela ts'ebetso ea mocheso).
Haeba mocheso o fetoha
Ha tsamaiso ea sehatsetsi e se e entsoe hore e sebetse ka mokhoa o tsitsitseng, litekanyo tsa taolo ea fektheri ea molaoli li lokela, maemong a mangata, ho fana ka tsamaiso e tsitsitseng le e batlang e potlakile. Haeba tsamaiso ka lehlakoreng le leng e oscillates, o tlameha ho ngolisa linako tsa oscillation le ho li bapisa le nako e behiloeng ea ho kopanya Tn, ebe o etsa liphetoho tse 'maloa ho li-parameter tse bontšitsoeng.
Haeba nako ea oscillation e le telele ho feta nako ea ho kopanya: (Tp > Tn, (Tn ke, re, metsotso e 4))
- Eketsa Tn ho makhetlo a 1.2 Tp
- Emela ho fihlela tsamaiso e leka-lekana hape
- Haeba ho ntse ho na le oscillation, fokotsa Kp ka, e re, 20%
- Emela ho fihlela tsamaiso e lekana
- Haeba e tsoela pele ho sisinyeha, pheta 3 le 4
Haeba nako ea oscillation e le khuts'oane ho feta nako ea ho kopanya: (Tp <Tn, (Tn ke, re, metsotso e 4)
- Fokotsa Kp ka, a re, 20% ea tekanyo ea ho bala
- Emela ho fihlela tsamaiso e lekana
- Haeba e tsoela pele ho sisinyeha, pheta 1 le 2
Lipotso Tse Botsoang Hangata
P: Ke lokela ho etsa eng haeba ho na le phoso molaong oa tsamaiso?
A: Li-LED tse tharo tse tlase haholo li tla khanya ha ho na le phoso. O ka kenya khoutu ea phoso skrineng ebe o hlakola alamo ka ho tobetsa konopo e kaholimo ka bokhutšoane.
P: Nka qala regulator joang?
A: Latela mehato ena:
- Hakolla sehokelo sa kantle sa ho tima/ho tima se qalang le ho emisa taolo.
- Hokela lebitso la kantle ho / off ho qala taolo.
P: Ke eng e lokelang ho etsoa tabeng ea ho fetoha ha mocheso?
A: Sheba bukana ea lihlahisoa "EKC 367" bakeng sa litaelo tse qaqileng mabapi le ho sebetsana le ho fetoha ha mocheso.
Litokomane / Lisebelisoa
 |
Danfoss EKC 367 Media Temperature Controller [pdf] Buka ea Taelo AN00008642719802-000202, AN00008642719801-000202, AN00008642719801E-0K0C0230627, EKC 367 Media Temperature Controller, EKCa367 |