Danfoss AAF007 Sesefa se Tsoetseng Pele se sebetsang
Litlhaloso
- Lebitso la Sehlahiswa: Sefe e tsoetseng pele e sebetsang AAF 007
- Moetsi: Danfoss
- Mohlala NomoroTlhaloso: AAF007
- Moqtage: Lisebelisoa tsa AC
- Likaroloana: Hazardous voltage sireletsa, DC-link capacitors, jarolla ka ho iketsa ho thibela
Litaelo tsa Tšebeliso ea Sehlahisoa
1. Tlhophiso Litaelo tsa Tšireletso
- Fetileview
Ikopanye le Danfoss haeba o sa hlake ka tlhahisoleseling efe kapa efe kapa haeba lintlha li le sieo. - Sehlopha se Lebeletsoeng le Litšoaneleho tse Hlokehang
Ke basebetsi ba tšoanelehang feela ba lokelang ho kenya, ho qala le ho lokisa. - Matšoao a Tšireletseho
Etsa bonnete ba hore u utloisisa matšoao a tšireletso a fanoeng bukeng ea litaelo ho thibela likotsi. - Litlhokomelo tse akaretsang tsa polokeho
- Utloisisa likotsi le mehato ea polokeho ts'ebelisong.
- Notlela kantle le tag ntša mehloli eohle ea matla pele ho mosebetsi oa motlakase holim'a sefe.
Litaelo
- Tlhokomeliso ea Tšireletseho le Tlhokomelo
- Ka bobeli tataiso ea ho instola le tataiso ea polokeho li fanoe ka sefe. Pele o qala ho kenya, itloaetse litataiso tsohle tsa polokeho le litemoso tse bukeng ea polokeho.
- Advanced Active Filter AAF 007 ha ea rereloa ts'ebeletso le ho lokisoa kantle ho feme. Likarolo tse sa sebetseng hantle li tlameha ho khutlisetsoa femeng.
- Tšebeliso e reriloeng
Advanced Active Filter AAF 007 e reretsoe ho sebelisoa litsing tsa motlakase ho ntlafatsa boleng ba motlakase. Ho fihlela boleng bo ntlafetseng ba matla, sefa se kenya maqhubu ka har'a khaonta ho fokotsa ho khopama ho marang-rang. - Lisebelisoa tse Hlokehang
- Tekanyo ea theipi
- Slotted screwdrivers (SL1/SL2)
- PH1, PH2 li-screwdrivers
- Wrench e nang le extender le 10 mm (bakeng sa ho kenya lebota)
- Sehlopha sa khabiso
- Wire crimper bakeng sa thapo e kholo
- Litekanyetso tsa Motlakase le Mechini
137G3607 137G3610 Phepelo ea mantlha 3×380–480/277 V / 50–60 Hz 3×380–480/277 V / 50–60 Hz Mofuta oa mantlha TN, TT, IT (e sa theoheleng holimo) TN, TT, IT (e sa theoheleng holimo) Hona joale 0–35 A 0–55 A Mocheso oa tikoloho Bonyane -10 °C (14 °F) Boholo ba 50 °C (122 °F)
Ho theoha ka holimo ho 40 °C (104 °F)=-3%/K (ho fihla ho 50 °C (122 °F))
Bonyane -10 °C (14 °F) Boholo ba 50 °C (122 °F)
Ho theoha ka holimo ho 40 °C (104 °F)=-3%/K (ho fihla ho 50 °C (122 °F))
Ploss 556 W 833 W Boima ba 'mele 16 lik'hilograma (35.3 lb) 17 lik'hilograma (37.5 lb) Litekanyo (HxWxD) 510x106x360 mm (20.1 × 4.2 × 14.2 ho) 510x106x360 mm (20.1 × 4.2 × 14.2 ho) SCCR 5 kA 5 kA - Ho netefatsa Thepa le Litaba
- Netefatsa hore lintho tse fanoeng le lintlha tse leqepheng la nameplate li lumellana le netefatso ea taelo. Leibole ea mojule oa sefe e kaholimo ho mojulu o mong le o mong oa sefe.
- Nameplate e fanoa ka taelo e le ntho e arohaneng 'me e tlameha ho behoa holim'a filthara e bonahalang haholo ka mor'a ho kenya.
- Netefatsa hore lintho tse fanoeng le lintlha tse leqepheng la nameplate li lumellana le netefatso ea taelo. Leibole ea mojule oa sefe e kaholimo ho mojulu o mong le o mong oa sefe.
Ho kenya Sefe
TLHOKOMELISO: KHOTHATSO KOTSI
Ho ama likarolo tse phelang tse kotsi ho ka fella ka lefu kapa kotsi e mpe. Setlhopha sena sa IP20/open type ha se fane ka tshireletso kgahlanong le ho kopana ka kotloloho le dikarolo tse phelang tse kotsi. E reretsoe ho kenngoa ka har'a sebaka sa tlatsetso kapa sebakeng se thibetsoeng sa phihlello se fanang ka tšireletso e nepahetseng khahlano le ho tsosoa ke motlakase.
TSEBISO
- Bakeng sa ho latela EN/IEC 61000-6-8:2020, ho bohlokoa hore filthara e kenngoe le ho hlokomeloa ka botsebi. Setsi sa setsebi se tla lekola boemo ba EMC pele se kenngoa, haeba sesebelisoa se kentsoe haufi le 30 m (98.4 ft) sebakeng sa bolulo.
- Thepa ena ha ea rereloa ho sebelisoa libakeng tsa bolulo 'me e ke ke ea tiisa ho fana ka tšireletso e lekaneng ho kamohelo ea seea-le-moea sebakeng se joalo.
- Filter ea mofuta o bulehileng oa IP20 e tla kengoa ka har'a likhabinete tsa motlakase kapa litsing tse nang le phihlello e thibetsoeng feela bakeng sa basebetsi ba nang le boiphihlelo.
Sebaka sa ho kenya se bohlokoa.
- Full output current e fumaneha ha maemo a latelang a ho instola a fihletsoe.
- Boholo ba mocheso oa moea o potolohileng: 40 ºC (104 ºF), derating 3%/K, boholo ba 50 °C (122 °F)
- Mocheso o fokolang oa moea o potolohileng: -10 ºC (14 ºF).
- Maemo a mocheso: Bophahamo <1000 m (3280 ft) ka holim'a bophahamo ba leoatle, ha joale e fokotseha 5%/1000 m (3280 ft), boholo ba 4000 m (13123 ft).
- Mongobo o lekanyelitsoeng ke 5–95% (o sa nyenyefatseng).
- Mohato oa 1 karolong ea Lits'oants'o e bontša mohlalaampkarolo ea kemiso eohle. Setšoantšo se tlase ke example ea ho kengoa ka tsela e tšoanang ea li-filters modules.
Tsamaiso
- Netefatsa hore tikoloho ea ts'ebetso le ho kenya motlakase ho finyella maemo a latelang.
- Tekanyo ea ka tlung e sa tsitsang / ea tšilafalo 2.
- Ho tlolatage sehlopha sa 3.
- Ha e sebelisoe libakeng tse metsi.
- Bakeng sa tšireletso e nepahetseng ea mocheso, fana ka tumello e hlokahalang ka holimo le ka tlase ho sefe.
- Netefatsa hore transducer (CT) ea hajoale e fihlela litlhoko tse latelang tse hlalositsoeng ho 1.8 Current Transducers, haholo-holo ha e sa otara ka sefe. Bakeng sa khetho e nepahetseng ea CT le likhoele ho latela, sheba 1.11 Cable le
- Litlhaloso tsa Fuse.
- Kenya sefe o latela mehato e baloang karolong ea Lits'oants'o.
- Kenya sefe holim'a kapa khahlano le bokaholimo ba tšepe bo tiileng. Netefatsa moea o hlokahalang oa 160 m3/h mojulung o mong le o mong bakeng sa ho pholisa hantle. Sheba mohato oa 2 karolong ea Lits'oants'o.
- Kenya mohala oa taolo.
- Kenya mohala oa sensor oa hajoale (sheba mohato oa 3 karolong ea Lipapiso).
- Kenya marang-rang a marang-rang (sheba mohato oa 4 karolong ea Lits'oants'o).
- Koahela sekoahelo sa mains ka mokhoa o sireletsehileng ho sefe.
- Netefatsa hore ho na le likhoele tse nepahetseng tsa li-transducer tsa hajoale ka:
- Ho hlahloba tataiso e nepahetseng / polarity ea CT: P1 ho ea sebakeng sa ho kopanya ho tloaelehileng.
- Ho hlahloba polarity e nepahetseng ea likhoele tsa CT: S1 ho CTX le S2 ho groundX (sheba mohato oa 7 karolong ea Litšoantšo).
- Ho hlahloba tatellano e nepahetseng ea CT ho sefa li-terminals: L1:CTA, L2:CTB, L3:CTC. L2: CTB e hlokahala feela bakeng sa lisebelisoa tsa terata tse 4 tse sa nke lehlakore.
- Ho hlahloba tatellano e nepahetseng ea ho kenya mekhahlelo ea grid.
- Ho netefatsa boemo bo nepahetseng ba CT ho latela maemo a sefahla. Laela lehlakore kapa lehlakore la grid.
- Ho tsamaisa lithapo: Lithapo tse lipakeng tsa AAF 007 le li-transformer tsa hajoale li tlameha ho ba lithapo tse sothehileng. Mosebetsi o nepahetseng o ka khoneha haeba mohala o lumellana hantle le setšoantšo se ka holimo mohato oa 7 karolong ea Litšoantšo. Haeba lithapo li fapanyetsana, li-harmonics ha lia lokela ho fokotseha, empa ampkhallisoa. Ho qoba ho fapanyetsana ha lithapo, u se ke ua sebelisa mebala ea terata habeli.
- Ha filthara e hoketsoe ho mains, e tla qala ts'ebetso. Lekola hore na mohala o nepahetse ka tlhahlobo ea ntlafatso ea boleng ba motlakase ebang ke ka sesebelisoa sa PC bakeng sa filthara kapa meter ea boleng ba matla. Sheba tataiso ea ts'ebetso ho fumana lintlha tse ling.
Tlhomamiso tšoanang
- Hoa khoneha ho kenya li-module tsa filthara ka ho bapa ho eketsa tlhahiso ea li-filters. Haeba li-module tsa filthara li kentsoe ka mokhoa o ts'oanang, sete e le 'ngoe ea CT e ka sebelisoa bakeng sa li-module tsohle tse tšoanang. Hokela mehala ea bobeli ea CT ka letoto ho tloha ho CT ho sefa mojule oa 1, ho isa mojuleng oa 1, ho isa ho X, le ho khutlela ho liteishene tsa CT S2 kapa I, bona mohato oa 2 karolong ea Lipapiso.
- Bakeng sa likhoele tse nepahetseng tsa transducer ea hajoale ha o na le lihloela tse 2, sheba mohato oa 5 karolong ea Lits'oants'o.
- Bakeng sa likhoele tse nepahetseng tsa transducer ea hajoale ha o na le lihloela tse fetang 2, sheba mohato oa 6 karolong ea Lits'oants'o. Netefatsa hore tlhophiso ea CT e lokiselitsoe ho "series" (default) ha o sebelisa letoto la khokahano ea CTs joalo ka ha ho hlalositsoe mehatong ea 5 le 6 karolong ea Lipapiso.
- Sheba mohato oa 2 karolong ea Lits'oants'o bakeng sa bohole bo nepahetseng ba sebaka se netefatsang ts'ebetso e nepahetseng mabapi le lintlha tsa mocheso le motlakase.
Li-Transducers tsa Hona Joale
- Setlhopha sa Advanced Active Filter AAF 007 se hloka li-transducer tsa morao-rao (CTs). Mehaho e ka khonehang ea CTs e ka lehlakoreng la mains / loop e koetsoeng, e lekanyang motlakase oa motlakase, ho kenyeletsa le motlakase oa motlakase, le lehlakoreng la mojaro / loop e bulehileng, e lekanyang mojaro oa hona joale ntle le motlakase oa motlakase.
- Litlhophisong tsena ka bobeli, ho hlokahala CT. Sehlopha sa CT se na le 2 CTs. Sistimi ea terata ea 3-phase 3 e na le li-conductors tse 3 empa ke maqhubu a mekhahlelo e 2 feela /
li-conductor li lekanyetsoa ka li-CTs ho phase L1 le phase L3. Mokhahlelo oa 2 o baloa ka hare. Haeba 3 CTs e se e ntse e le teng, ke mekhahlelo feela ea L1 le L3 e lokelang ho kopanngoa le sefe. - Haeba li-transducer tsa hajoale li se li kentsoe kapa li laetsoe ka thoko ho sefe, etsa bonnete ba hore li kopana le lintlha tse latelang ho netefatsa ts'ebetso e lebelletsoeng ea sefe:
- Boima bo fokolang ba 2.5 VA
- Bonyane sehlopha sa ho nepahala 0.5
- 5 Mokotlana oa bobeli
- Karolo e ka holimo ea lithapo e na le tšusumetso e kholo ho boleng ba taolo. Haeba karolo ea sefapano e le nyane haholo mabapi le bolelele ba terata, tekanyo e hlahisoang e tla ba e nyenyane haholo ho finyella boleng bo botle ba ho laola le ho fokotsa hantle ha harmonics. A = 2 × d × v × I2 × ρ/ S
- Lintlha tse latelang li lokela ho tsejoa:
- S = Matla a transformer ea hajoale (ka tloaelo 2.5 VA)
- d = Sebaka (bolelele ba cableway) pakeng tsa sefahla le transformer ea hona joale
- v = Ntho e sothang (hangata 1.5)
- I = Nako ea bobeli ea transformer ea hajoale (ka tloaelo 5 A)
- ρ = Rho = khanyetso e khethehileng ea koporo (0.01786 Ω×mm2/m)
ExampLe: = 2 × 2m× 1 . 5 × 52 × 0 . 01786 Ω×m/2 . 5 VA ×mm2 = 1 . 07 limilimithara2
Sistimi ea terata e mene
- Litlhaloso tsohle likarolong tse fetileng le lipapiso tse latelang li lebisitse ho litsamaiso tsa terata tse 3. Setlhopha se ka sebetsa le lits'ebetsong tsa terata tse 4. Ho phaella mehatong e seng e hlalositsoe le e bontšitsoeng, tse latelang li tlameha ho etsoa:
- 3rd CT e tlameha ho kenngoa mokhahlelong oa 2/mohato oa B. Mohala oa Neutral o tlameha ho hokeloa ho terminal ea mains. Ka sesebelisoa sa PC bakeng sa filthara, fetola grid topology ho 3P4W.
TSEBISO
HLALELE SEBE
- Ho hokela terata e sa nke lehlakore lits'ebetsong tsa terata tse 3 ho tla etsa hore sefe se sebetse ka mokhoa o sa lokelang.
- Se ke oa hokela terata e sa nke lehlakore lits'ebetsong tsa terata tse 3.
Tahlehelo ea Matla le Bokhabane
Bakeng sa data ea tahlehelo ea matla ho kenyelletsa tahlehelo ea karolo ea mojaro, bona https://ecosmart.mydrive.danfoss.com.
Litlhaloso tsa Cable le Fuse
Sesefa se sirelelitsoe ka hare ka li-fuse tsa semiconductor. Tšireletso ea lekala e itšetlehile ka maemo le melao ea tsamaiso ea sebaka seo, 'me kahoo ha ho likhothaletso tse ka etsoang. Ho ts'ehetsa khetho ea ts'ireletso e loketseng ea lekala, li-fuse tsa kahare tsa filthara li hlalositsoe tafoleng e latelang.
| 35 A module | 55 A module | |
| L1/L2/L3 karolo ea sefapano | E thata: 2.5-35 limilimithara2 (2 AWG)
E feto-fetoha: 2.5-25 mm2 (14–4 AWG) E feto-fetoha le ferrule: 2.5-25 mm2 (14–4 AWG) |
E thata: 2.5-35 limilimithara2 (2 AWG)
E feto-fetoha: 2.5-25 mm2 (14–4 AWG) E feto-fetoha le ferrule: 2.5-25 mm2 (14–4 AWG) |
| Boholo ba ho hlobola | 18 mm (0.7 in) | 18 mm (0.7 in) |
| Torque | 2.5–3.0 Nm (22.12–26.5 in-lb) | 2.5–3.0 Nm (22.12–26.5 in-lb) |
| Lintho tse bonahalang | Koporo | Koporo |
| Tekanyo ea mocheso | 70 °C (158 °F) | 70 °C (158 °F) |
| PE cross-section | 16 limilimithara2 (6 AWG) | 16 limilimithara2 (6 AWG) |
| Boholo ba ho hlobola | 18 mm (0.7 in) | 18 mm (0.7 in) |
| Mokotla oa thapo | O-mofuta 5-6 limilimithara | O-mofuta 5-6 limilimithara |
| Torque | 2.5–3.0 Nm (22.12–26.5 in-lb) | 2.5–3.0 Nm (22.12–26.5 in-lb) |
| Lintho tse bonahalang | Koporo | Koporo |
| Tekanyo ea mocheso | 70 °C (158 °F) | 70 °C (158 °F) |
| CT cables cross-section | 2.5 limilimithara2 (14 AWG) | 2.5 limilimithara2 (14 AWG) |
| Torque | 0.8 Nm (7.1 in-lb) | 0.8 Nm (7.1 in-lb) |
| Laola lik'hebole ka bophara | 1 limilimithara2 (17 AWG) | 1 limilimithara2 (17 AWG) |
| 35 A module | 55 A module | |
| Torque | 0.8 Nm (7.1 in-lb) | 0.8 Nm (7.1 in-lb) |
| Fuse ea ka hare ea semiconductor | Sinofuse RS308-HB-4G100A 750VDC | Sinofuse RS308-HB-4G100A 750VDC |
litšoantšo
PHATLATSO EA EU EA TUMELO
Danfoss A / S
Danfoss Drives e phatlalatsa tlas'a boikarabelo ba rona feela hore
- Sehlopha sa sehlahisoa: Lisefe
- Mefuta ea mabitso: 137G3610
Ho akarelletsoa ke phatlalatso ena ho tsamaellana le (li)taelo, maemo kapa litokomane tse ling tse tloaelehileng, ha feela sehlahisoa se sebelisoa ho latela litaelo tsa rona.
Moqolo o tlasetagDirective 2014/35 / EU
TS EN 62477-1 Litlhokahalo tsa polokeho bakeng sa lisebelisoa le lisebelisoa tse fetolelang matla a elektroniki - Karolo ea 2012: Kakaretso
Taelo ea EMC 2014/30/EU
- TS EN 61800-3 Sistimi ea ho khanna ka lebelo la motlakase - Karolo ea 2018: Litlhokahalo tsa EMC le mekhoa e ikhethileng ea tlhahlobo. TS EN IEC 3-61000 -3 Khokahano ea motlakase ea 2-2019 - Karolo ea 12-3: Meeli - Meeli bakeng sa
- tlhahiso ea hona joale ea harmonic (ha e sebetse ka lebaka la hore sehlahisoa sena se fokotsa tlhahiso ea hona joale ea harmonic)
- TS EN IEC 61000-3 -3 Tšebelisano ea motlakase (EMC) - Karolo ea 2020-07: Meeli - Meeli ea matlatage liphetoho, voltagLiphetoho le ho panya ha maemo sechabeng tlase voltaglitsamaiso tsa phepelo ea e, bakeng sa lisebelisoa tse nang le litekanyetso tsa hajoale ≤16 A ka mohato mme e sa ipapise le khokahano e nang le maemo (moemeli oa liyuniti> 16A)
- TS EN IEC 61000-6-2 Tšebelisano ea motlakase (EMC) - Karolo ea 2019-11: Litekanyetso tsa generic - Tekanyetso ea ts'ireletso bakeng sa tikoloho ea indasteri.
- TS EN IEC 61000-6-4 Khokahano ea motlakase (EMC) - Karolo ea 2020-09: Litekanyetso tse akaretsang -
- Tekanyetso ea tlhahiso bakeng sa tikoloho ea indasteri
RoHS Directive 2011/65/EU ho kenyelletsa le tokiso 2015/863
EN63000: Litokomane tsa 2018 tsa tekheniki bakeng sa tlhahlobo ea lihlahisoa tsa motlakase le tsa elektroniki mabapi le thibelo ea lintho tse kotsi.
E khethiloe e le Khoebo
Danfoss o tiisa feela ho nepahala ha phetolelo ea Senyesemane ea phatlalatso ena. Ha phatlalatso e fetoleloa puong efe kapa efe, mofetoleli ea amehang o tla jara boikarabelo ba ho nepahala ha phetolelo.
- Nomoro ea ID: 00777534
- Ngaka ena. e laoloa ke 500B0577
- Nomoro ea Phetoho: A,2
- DocuSign Envelope ID: 607DDAA3-CBE7-4509-B28A-A9ACB8CD01FD
e phatlalatsa tlas'a boikarabelo ba rona feela hore
- Sehlopha sa lihlahisoa: Li-filters
Tlhaloso ea mofuta: 137G3610
Ho akarelletsoa ke phatlalatso ena ho tsamaellana le (li)taelo, maemo kapa litokomane tse ling tse tloaelehileng, ha feela sehlahisoa se sebelisoa ho latela litaelo tsa rona.
- Melawana ya Disebediswa tsa Motlakase (Tshireletso) 2016
TS EN 62477-1 Litlhokahalo tsa polokeho bakeng sa lisebelisoa le lisebelisoa tse fetolelang motlakase - Karolo ea 2012: Kakaretso - Melao ea Tšebelisano ea Motlakase ea 2016
- TS EN 61800-3 Sistimi ea ho khanna ka lebelo la motlakase - Karolo ea 2018: Litlhokahalo tsa EMC le mekhoa e ikhethileng ea tlhahlobo.
- TS EN IEC 61000-3 -2 Tšebelisano ea motlakase (EMC) - Karolo ea 2019-12: Meeli - Meeli ea tlhahiso ea hona joale ea harmonic (ha e sebetse ka lebaka la hore sehlahisoa sena se fokotsa tlhahiso ea hona joale ea harmonic)
- TS EN IEC 61000-3 -3 Tšebelisano ea motlakase (EMC) - Karolo ea 2020-07: Meeli - Meeli ea matlatage liphetoho, voltagLiphetoho le ho panya ha maemo sechabeng tlase voltaglitsamaiso tsa phepelo ea e, bakeng sa lisebelisoa tse nang le litekanyetso tsa hajoale ≤16 A ka mohato mme e sa ipapise le khokahano e nang le maemo (moemeli oa liyuniti> 16A)
- TS EN IEC 61000-6 -2 Khokahano ea motlakase (EMC) - Karolo ea 2019-11: Litekanyetso tse akaretsang -
- ~ Tekanyetso ea ho itšireletsa mafung bakeng sa tikoloho ea indasteri
- TS EN IEC 61000-6-4 Khokahano ea motlakase (EMC) - Karolo ea 2020-09: Litekanyetso tse akaretsang -
- Tekanyetso ea tlhahiso bakeng sa tikoloho ea indasteri
- Thibelo ea Tšebeliso ea Lintho tse itseng tse Kotsi ho Thepa ea Motlakase le ea Elektronike
- Melaoana ea 2012 joalo ka ha e fetotsoe
- TS EN 63000: 2018 Litokomane tsa tekheniki bakeng sa tlhahlobo ea lihlahisoa tsa motlakase le tsa elektroniki mabapi le lithibelo tsa lintho tse kotsi.
E khethiloe e le Khoebo
Danfoss o tiisa feela ho nepahala ha phetolelo ea Senyesemane ea phatlalatso ena. Ha phatlalatso e fetoleloa puong efe kapa efe, mofetoleli ea amehang o tla jara boikarabelo ba ho nepahala ha phetolelo.
- Nomoro ea ID: 00777534
- Ngaka ena. e laoloa ke 500B0577
- Phetolelo No:A,2
Danfoss A / S
Ulsnaes 1 DK-6300 Graasten vlt-drives.danfoss.com
Danfoss e ke ke ea amohela boikarabelo leha e le bofe bakeng sa liphoso tse ka bang teng libukeng tsa libuka, libukana le lingoliloeng tse ling. Danfoss e na le tokelo ea ho fetola lihlahisoa tsa eona ntle le tsebiso. Sena se sebetsa le ho lihlahisoa tse seng li ntse li laetsoe hafeela liphetoho tse joalo li ka etsoa ntle le liphetoho tse latelang tse hlokahalang ho latela litlhaloso tse seng li lumellane. Matšoao ohle a khoebo a thepa ena ke thepa ea lik'hamphani tse amehang. Danfoss le mofuta oa logo ea Danfoss ke matšoao a khoebo a Danfoss A/S. Litokelo tsohle li sirelelitsoe.
LBH
P: Nka thibela joang ho qala ha filthara ka boiketsetso?
A: Ho thibela ho qala ka boiketsetso, etsa bonnete ba hore jumper ea EPO contact e teng, likoahelo tsohle li behiloe ka mokhoa o sireletsehileng, li-transducer tsa hona joale li kentsoe ka nepo, 'me u nahane ka ho thibela khokahanyo ea othomathike ka software ea PC. Ha ho hlokahala, hakolla sefe ho tsoa ho likhoele tse kholo.
P: Ke lokela ho etsa eng haeba ho na le ho hloleha ha ka hare ho drive?
K: Netefatsa hore likhurumetso tsohle tsa tšireletso li teng 'me li tlanngoe hantle pele u sebelisa matla ho thibela kotsi efe kapa efe ea ho se atlehe ka hare e ka bakang kotsi e mpe.
Litokomane / Lisebelisoa
 |
Danfoss AAF007 Sesefa se Tsoetseng Pele se sebetsang [pdf] Bukana ea Mosebelisi AAF007, AAF007 Advanced Active Filter, AAF007, Advanced Active Filter, Active Filter, Filter |