TC17

MOEKETSI MOSEBETSI

Ka kopo bala bukana ena ka hloko pele u sebelisa sehlahisoa 'me u se boloke bakeng sa tšebeliso ea nako e tlang.

TŠIRELETSO LITS'ELISO

1. Bala 'me u latele litaelo tsohle pele u li sebelisa.
2. Boloka sehlahisoa moo bana ba ka se fihleng. E khothaletsoa ho sebelisoa ke basebelisi ba fetang lilemo tse 16.
3. Sehlahisoa se na le betri ea Li-ion e hahelletsoeng ka hare, ka kopo u se ke ua e lahlela mollong kapa ua e lahla ka mokhoa o sa reroang, kapa e ka baka mollo kapa ho phatloha.
4. Se ke oa sebelisa sehlahisoa bakeng sa lits'ebetso tse kantle ho morero oa sona.
5. U se ke ua qhaqha le ho kopanya sehlahisoa sena ntle le tumello.
6. U se ke ua pepesetsa sehlahisoa ho pula kapa metsi a mofuta ofe kapa ofe.
7. Se ke oa boloka sehlahisoa sebakeng sa mocheso o phahameng kapa libakeng tse mongobo.
8. Se ke oa sebelisa sehlahisoa haufi le maro a tukang kapa sebakeng se nang le khase kapa seqhomane.
9. Boloka sehlahisoa se omme, se hloekile, 'me se se na oli le mafura. Ka kopo sebelisa lesela le ommeng ho le hloekisa.
10. Haeba sehlahisoa se sa sebelisoe nako e telele, ka kopo se lefelle bonyane hang ka likhoeli tse 6.
11. Sehlahisoa le tube ea eona ea theko e tla chesa ka mor'a nako e telele ea tšebeliso e tsoelang pele, ka kopo u se ke ua ama tube ea inflation ho qoba ho phahama ka mor'a ho qeta ho theoha ha theko.
12. Ka kopo, khetha Yuniti e nepahetseng pele khatello e setiloe esale pele, kapa e ka baka ho phatloha ha thaere. Ka kopo sheba phetoho e tloaelehileng ea Unit: 1bar=14.5psi, Ibar=100kpa, 1bar=1.02kg/cm?

TLHOKOMELO SEHLABAKA

Lebitso la Sehlahiswa	Cordless Tyre Inflator
Mohlala No	TC17
Mofuta oa USB	Mofuta oa C
Keletso Voltage	5V/2A 9V/2A
Nako ea ho tjhaja	5-6H(5V/2A)/ 2-3H (9V/2A)
USB Output Voltage	5V/2.4A ( 12W)
Lekhalo le Lekanyetsoang la Khatello	3-150PS1150PSI Max
4 Diyuniti tsa boikgethelo	PSI,BAR, KPA, KG/CM2
4 Mekhoa ea ho sebetsa	Likoloi, Lithuthuthu, Libaesekele, Libolo
3 Mekhoa ea Leseli	Lebone, Mokhoa oa ho panya, sos

LIEKETSENG LIHLAHISO

1. LCD Pressure Display: Sehlahisoa se ka bontša ka ho hlaka khatello e lekantsoeng (ho feta 3PSI) le khatello e behiloeng esale pele. Khatello ea nako ea sebele e fetoha skrineng nakong ea theko ea lichelete e le hore u ka shebella khatello ea lebili ka linako tsohle.
2.  Taolo e Bohlale: Haeba khatello ea thaere ea nako ea 'nete e phahame ho feta khatello ea thaere e behiloeng esale pele, sehlahisoa se ke ke sa sebetsa. Sehlahisoa se tla emisa ho inflating ka bo eona ha se fihla khatellong ea mabili e seng e setiloe.
3. Letšoao la Battery e tlaase: Ha betri e le tlaase, skrine ea LCD e tla bontša LO ho u hopotsa ho lefisa sehlahisoa.
4. Auto Power Off: Haeba sehlahisoa se sa sebelisoe ho feta 90s#2s, se tla tima auto.
5. Tšireletso e Phahameng ea Mocheso: Ka mor'a tšebeliso e tsoelang pele ea sehlahisoa, haeba mocheso oa cylinder ea eona o fihla ho 203 ° F, sehlahisoa se tla emisa ho phalla le  skrineng e tla benya ho hopotsa.Ha mocheso o theohela ho 185°F, sehlahisoa se tla qala ho buloa hape.
6. Ts'ireletso ea Battery: E hahiloe ka har'a litšireletso tse 4 tse ntlafalitsoeng, ho kenyelletsa tefiso e fetelletseng / e ntšitsoeng ka ho fetelletseng / over-current / over-voltagtshireletso ya e - ho netefatsa bophelo bo bolelele ba betri.
7. Mosebetsi oa Memori: The inflator ea thaere e ka hopola mofuta oa eona oa ho qetela oa litekanyo, e leng se etsang hore ho be bonolo hore u se sebelise nakong e tlang.

TLHALOSO EA SEHLAHISOA

1. Inflation tube port
2. Leseli la LED
3. Sekoti se ntšang mocheso
4. LCD skrine
5. Eketsa konopo ea khatello
6. Konopo ea phetoho ea Mode/Unit
7. Konopo ea ho qala/Emisa/Ho tima
8. Matla a ho bulela/konopo ea LED
9. Fokotsa konopo ea khatello

3.Litaelo tsa konopo

E tobetse ho kenya matla holim'a mochini o kenyang mabili.
E tobetse nako e telele ho bulela lebone la LED, ebe u e tobetsa hape ho fetola mokhoa oa khanya le ho tima lebone la LED.
Ka mor'a hore motlakase o kene ka har'a thaere, e hatelle ho qala / emisa mochini o kenyang mabili.
E hatelle nako e telele ho tima thaere inflator.
 E tobetse ho fetola mekhoa e 4 e latelang ea ho sebetsa ka tatellano.

Tobetsa nako e telele ho fetola Yuniti.
E tobetse nako e telele ho fihlela letšoao la PSI le bonesa skrineng se nepahetseng, ebe u e tobetsa hape ho khetha Yuniti eo u e batlang.
Tobetsa konopo ea +/-, khatello e tla eketseha kapa e fokotsehe butle-butle.
Tobetsa 'me u tšoare konopo ea +/-, khatello e tla eketseha kapa e fokotsehe ka potlako.
+ Haeba khatello e ka tlase ho 100PSI, e tla eketseha kapa e fokotsehe ka 0.5PSI.
– Haeba khatello e feta 100PSL, e tla eketseha kapa e fokotsehe ka 1PSI.

4. Lisebelisoa
4 Li-Nozzles tsa Moea

TS'EBETSO LITAELO

1. Preset Khatello ea Tyre
   Tobetsa konopo ea "M" ho khetha mokhoa oo u o batlang oa ho sebetsa. ebe o tobetsa konopo ea "M" nako e telele ho fihlela letšoao la PSI le bonesa skrineng se nepahetseng, ebe o tobetsa konopo ea "M" hape ho khetha Yuniti eo u e batlang, ebe o tobetsa konopo ea "+" kapa "" ho seta boleng ba khatello ea thaere eo u e batlang.
   1 Boemo ba betri
   2 Yuniti
   3 Mokhoa oa ho sebetsa
   4 Pontsho ya kgatello
   
2. Mokhoa oa ho pupetsa Lithaere
   1 Tobetsa konopo ea Matla ho kenya motlakase ho thaere.
   2 Hokela phaephe ea inflation ho valve ea mabili.
   3 Tobetsa konopo ea "M" ho khetha mokhoa oo u o batlang oa ho sebetsa, ebe o tobetsa konopo ea "M" nako e telele ho fihlela letšoao la PSl le bonesa skrineng se nepahetseng, ebe o tobetsa konopo ea "M" hape ho khetha Yuniti eo u e batlang, ebe o tobetsa "+" kapa konopo ea "=" ho seta esale pele boleng ba khatello ea thaere eo u e batlang.
   4 Tobetsa konopo ea OK ho qala mochini o kenyang moea oa thaere, ema ho fihlela o ema ka bohona ha o fihla khatellong e seng e setiloe. Ebe o tobetsa konopo ea OK nako e telele ho tima thaere inflator.
   5 Hula tšupu ea inflation ho valve ea mabili.
   
3. Mokhoa oa ho Tseba Libalune , Masale a ho sesa, le lintho tsa ho bapala tse Infatable
   Tobetsa konopo ea Matla ho kenya motlakase ho thaere inflator.
   
   Khetha mokelikeli o nepahetseng oa moea 'me u kopanye tube ea inflation ho li-inflatable.
   
   Tobetsa konopo ea OK ho qala ho inflating.
   
   Ka mor'a hore u be le moea o feletseng, tobetsa konopo ea OK ho emisa ho inflating.
4. Leseli Taelo
   
   
5. Banka ea Matla
   Tobetsa konopo ea Matla ho kenya motlakase ho thaere inflator. Ebe e ka sebelisoa e le banka ea motlakase ho tjhaja mohala oa hau.
   

KHATELLO E KHOTSOANG HO HLOKA MOEA

Baesekele	12,14,16 inch thaere ea baesekele	30-50PSI
	20.22,24 inch thaere ea baesekele	40-50PSI
	26,27.5,29 inch thaba	45-65PSI
	700C thaere ea baesekele ea tubular tseleng	120-145PS1
Sethuthuthu	Lithaere tsa lithuthuthu	1.8–2.8BAR
Likoloi	Lithaere tsa likoloi tse nyane	2.2-2.8BAR
Libolo	Basketball	7-'9PSI
	Bolo ea maoto	8-16PSI
	Volleyball	4-'5PSI
	Rugby	12-14PSI

TIISETSO HLAHANG

Re fana ka tiisetso ea likhoeli tse 24 bakeng sa sehlahisoa sa rona. Haeba u na le lipotso kapa litaba tsa sehlahisoa, ka kopo romella lengolo-tsoibila ho sehlopha sa rona sa litšebeletso tsa semmuso cyeuvc@outlook.com, Re tla u araba ka hare ho lihora tse 24.

eVatmaster Consulting GmbH
Bettinastr. 30,60325 Frankfurt am Main,Jeremane
contact@evatmaster.com
EVATOST CONSULTING LTD
Suite 11, Mokato oa Pele, Setsi sa Khoebo sa Moy Road, Taffs
Hantle, Cardiff, Wales, CF15 7QR
contact@evatmaster.com
E-mail: cyeuvc@outlook.com

E ENTSOE CHAENA

Litokomane / Lisebelisoa

CXY TC17 Cordless Tyre Inflator [pdf] Bukana ea Mosebelisi B1bQWVf1UnL, TC17, TC17 Cordless Tyre Inflator, Cordless Tyre Inflator, Tyre Inflator, Inflator

Litšupiso

• Bukana ea Mosebelisi