LAELA ACCESS MLRK1-YAL6 Tsoa Sesebediswa Kits
Litlhaloso
Lisebelisoa tsa Motlakase tse khothalelitsoeng: Lisebelisoa tsohle tsa ho tsoa tsa Command Access le lisebelisoa tse kentsoeng tšimong li lekoa ka botlalo ka lisebelisoa tsa motlakase tsa Command Access fekthering ea rona. Haeba u rera ho sebelisa phepelo ea motlakase e seng Taelo, e tlameha ho ba phepelo ea motlakase e tlhotliloeng le e laoloang.
Litaelo tsa Tšebeliso ea Sehlahisoa
Ho seta PUSH TO SET (PTS)
Tlhahisoleseling ea Bohlokoa: Pele o qeta, etsa bonnete ba ho
leka tšebetso ebe u seta bocha PTS ha ho hlokahala.
- Mohato oa 1: Ho kenya mokhoa oa PTS: Tobetsa konopo ea MM5 'me u sebelise matla. Sesebelisoa se tla ntša beep e 1 KHUTSANE. Hona joale sesebelisoa se maemong a PTS.
- Mohato oa 2: Ha u ntse u hatella "push pad", sebelisa matla (ke hore, ho hlahisa boitsebiso ho 'mali).
- Mohato oa 3: Tsoela pele ho boloka pad e tepeletse maikutlo, sesebelisoa se tla ntša 1 LONG Beep. Ka mor'a hore beep e emise, lokolla pad, 'me joale tokiso e felile. Lekola sebaka se secha. Haeba u sa rate, pheta mehato e 3.
Tharollo ya mathata le Diagnostics
| Li-beep | Tlhaloso | Tharollo |
|---|---|---|
| 2 li-beeps | Ho feta Moqtage | > 30V unit e tla tima. Sheba voltage & fetola ho 24 V. |
| 3 li-beeps | Tlas'a Voltage | <20V unit e tla koala. Sheba voltage & fetola ho 24 V. |
| 4 li-beeps | Sensor e hlolehileng | Netefatsa hore lithapo tsohle tse 3 tsa sensor li kentsoe ka nepo. Tlosa sebaka sensor haeba bothata bo ntse bo tsoela pele ka ho ikopanya le ofisi. |
| 5 li-beeps | Ho hloleha ho kgutlela morao kapa ho etsa ntja | Kamora ho hloleha ha 1: li-beep tse 5 ebe hang-hang o leka ho khutlisa hape. Kamora ho hloleha ha 2: li-beep tse 5 ka khefutso lipakeng tsa metsotsoana e 30 ka nako eo sesebelisoa se leka ho hula hape. Ka mor'a hore 3 e hlōlehe: 5 beeps metsotso e meng le e meng ea 7, sesebelisoa se ke ke sa leka ho hulanya. |
KENYA Litaelo
Command Access MLRK1 ke sesebelisoa sa ho khutlisa latch-enjene se kentsoeng sebakeng sa:
Kit e kenyeletsa
- A. 61045 - Motor Mount w/ MM4T letoto la module
- B. 40306 - 10-24 X 0.25 SCREW (X2)
- C. 40144 - Dogging Hole Cap
- D. 50944 - Molex Pigtail
Lisebelisoa Tse Hlokehang
#2 Phillips hlooho screwdriver
LIEKETSENG TS'OANELO
- Keletso Voltage: 24VDC +/- 10%
- KAROLO KATENG EA KHUTLO EA LATCH HONA JOALE: 900 mA
- Karolelano ea nako ea hajoale: 215 ma
- Tekanyo ea terata: Bonyane 18 gauge
- terata e otlolohileng - ha ho li-relay kapa likarolo tsa taolo ea phihlello lipakeng tsa phepelo ea motlakase le mojule
Rex e hahelletsoeng ka boikhethelo
- SPDT - E fuoe .5a @24V
- botala= E tloaelehileng (C)
- Blue = hangata e butsoe (NO)
- bohlooho = hangata ho koaloa (NC)
Lisebelisoa tsa Matla a Khothalletsoang
- Lisebelisoa tsohle tsa ho tsoa tsa Command Access le lisebelisoa tse kentsoeng tšimong li lekoa ka botlalo ka Command
- Fumana lisebelisoa tsa motlakase fekthering ea rona. Haeba u rera ho sebelisa phepelo ea motlakase e seng Taelo e tlameha ho ba phepelo ea motlakase e tlhotliloeng le e laoloang.
Boitsebiso ba Theknoloji
Skena 'na bakeng sa lintlha tse ling
Ho seta PUSH TO SET (PTS)
Litaba tsa Bohlokoa
Pele o qeta, etsa bonnete ba hore o leka ts'ebetso ebe o seta bocha PTS, ha ho hlokahala.
- Mohato oa 1 Ho kenya mokhoa oa PTS: Tobetsa konopo ea MM5 'me u sebelise matla. Sesebelisoa se tla ntša beep e 1 KHUTSANE. Hona joale sesebelisoa se maemong a PTS.
- Mohato 2 - Ha u ntse u sithabetsa pad pad, sebelisa matla. (ke ho hlahisa mangolo a bopaki ho mmadi).
- Mohato oa 3 - Tsoela pele ho boloka pad e tepeletse maikutlo, sesebelisoa se tla ntša 1 LONG Beep.
Ka mor'a hore beep e khaotse, lokolla pad 'me joale tokiso e felile. leka sebaka se secha, Haeba e se kamoo u ratang, pheta mehato e 3.
Tharollo ya mathata le Diagnostics
| Li-beep | Tlhaloso | Tharollo |
| 2 li-beeps | Ho feta Moqtage | > 30V unit e tla tima. Sheba molumotage & e fetole ho 24 V. |
| 3 li-beeps | Tlas'a Voltage | <20V unit e tla koala. Sheba molumotage & ikamahanya le 24 V. |
| 4 li-beeps | Sensor e hlolehileng | Netefatsa hore lithapo tsohle tse 3 tsa sensor li kentsoe ka nepo. Tlosa sensor haeba bothata bo ntse bo tsoela pele ka ho ikopanya le ofisi. |
|
5 li-beeps |
Ho hloleha ho kgutlela morao kapa ho etsa ntja |
Ka mor'a ho hlōleha ha 1: Li-beep tse 5 ebe hang-hang li leka ho khutlisa hape.
Ka mor'a ho hlōleha ha 2nd: Li-beep tse 5 ka khefutso lipakeng tsa metsotsoana e 30 ebe sesebelisoa se leka ho khutlisa hape.
Ka mor'a ho hlōleha ha 3: Li-beep tse 5 metsotso e meng le e meng ea 7, sesebelisoa se ke ke sa leka ho khutlisa. |
litaelo tsa ho kenya
- Tlosa Letlapa la Filler ho tloha bareng.
- Haeba Kopano ea Lintja e kentsoe, tlosa li-screw tsa eona tse peli ebe u li lahla.
- Ho kenya enjene, beha Motor Link Cutout holim'a Tab ea Ntja.
- Hang ha Motor Link e kentsoe ka mokhoa o sireletsehileng ho Tab ea Dogging. Hlophisa Likoti tse peli tse Mountging.
- Ka letsoho le leng le tšoereng enjene sebakeng sa eona, phethola bar 'me u sireletse khiti ka ho kenya likurufu tse peli tse fanoeng ka har'a Mounting Holes ho tloha ka morao ho bar.
- Ho kenya Plate ea Filler hape, o tla hloka ho tlosa Tataiso ea Pad ea polasetiki.
- Ho tlosa, ka bonolo sebelisa khatello ka morao ho Tataiso ea Pad ho fihlela e tsoa ho Filler Plate.
- Ho kenya Pad Guide e e fetole ka mahlakoreng ho fihlela e hlakola mahlakoreng a bar, ebe o e hatella khahlanong le pad.
- Haeba ho hlokahala, kenya Dogging Hole Cap e fanoeng ka ho e tobetsa ka mokoting oa ntja.
- Thellela ho Filler Plate ebe o hokela enjene ho matla. Leka ho sebelisa litaelo tse ka tlase.
Ho seta PUSH TO SET (PTS)
Litaba tsa Bohlokoa
Pele o qeta, etsa bonnete ba hore o leka ts'ebetso ebe o seta bocha PTS, ha ho hlokahala.
- Mohato oa 1 - Ho kenya mokhoa oa PTS: Tobetsa konopo ea MM5 'me u sebelise matla. Sesebelisoa se tla ntša beep e 1 KHUTSANE. Hona joale sesebelisoa se maemong a PTS.
- Mohato oa 2 - Ha u ntse u hatella pad push, sebelisa matla. (ke ho hlahisa mangolo a bopaki ho mmadi).
- Mohato oa 3 - Tsoela pele ho boloka pad e tepeletse maikutlo, sesebelisoa se tla ntša 1 LONG Beep. Ka mor'a hore beep e khaotse, lokolla pad 'me hona joale tokiso e
felletse. leka sebaka se secha, Haeba e se kamoo u ratang, pheta mehato e 3.
Tharollo ya mathata le Diagnostics
| Li-beep | Tlhaloso | Tharollo |
| 2 li-beeps | Ho feta Moqtage | > 30V unit e tla tima. Sheba molumotage & e fetole ho 24 V. |
| 3 li-beeps | Tlas'a Voltage | <20V unit e tla koala. Sheba molumotage & e fetole ho 24 V. |
| 4 li-beeps | Sensor e hlolehileng | Netefatsa hore lithapo tsohle tse 3 tsa sensor li kentsoe ka nepo. Tlosa sensor haeba bothata bo ntse bo tsoela pele ka ho ikopanya le ofisi. |
|
5 li-beeps |
Ho hloleha ho kgutlela morao kapa ho etsa ntja |
Ka mor'a ho hlōleha ha 1: Li-beep tse 5 ebe hang-hang li leka ho khutlisa hape.
Ka mor'a ho hlōleha ha 2nd: Li-beep tse 5 ka khefutso lipakeng tsa metsotsoana e 30 ebe sesebelisoa se leka ho khutlisa hape. Ka mor'a ho hlōleha ha 3: Li-beep tse 5 metsotso e meng le e meng ea 7, sesebelisoa se ke ke sa leka ho khutlisa. Ho Reset: Tobetsa bar bakeng sa metsotsoana e 5 ka nako efe kapa efe. |
LBH
- P: Ke lisebelisoa life tse hlokahalang bakeng sa ho kenya?
- A: #2 Phillips hlooho screwdriver ea hlokahala bakeng sa ho kenya.
- P: Nka tlosa Tataiso ea Pad joang bakeng sa ho kenya Filler Plate hape?
- A: Ho tlosa, ka bonolo sebelisa khatello ka morao ho Tataiso ea Pad ho fihlela e tsoa ho Filler Plate. Ho kenya Tataiso ea Pad, e fetole ka lehlakore ho fihlela e hlakola mahlakoreng a bar, ebe o e hatella khahlanong le pad.
- P: Nka rarolla Overvol joang?tage kapa Undervoltagmathata a?
- A: Bakeng sa overvolvetage (> 30V) kapa Undervoltage (<20V), hlahloba voltage 'me u e fetole ho 24 V ho latela.
- P: Ke lokela ho etsa eng haeba ho na le Sensor e hlolehileng?
- A: Netefatsa hore lithapo tsohle tse 3 tsa sensor li kentsoe ka nepo. Haeba bothata bo ntse bo tsoela pele, tlosa sensor ka ho ikopanya le ofisi.
- P: Ke tseba joang haeba ho na le ho hloleha ho khutlisa kapa ho etsa lintja?
- A: Sesebelisoa se tla fana ka mekhoa e khethehileng ea beep e bontšang ho hlōleha ho fapanengtages. Sheba buka ea mosebelisi bakeng sa lintlha tse felletseng.
Tšehetso ea bareki ba US 1-888-622-2377 | www.commandaccess.com | Ts'ehetso ea bareki ba CA 1-855-823-3002
Litokomane / Lisebelisoa
 |
LAELA ACCESS MLRK1-YAL6 Tsoa Sesebediswa Kits [pdf] Buka ea Taelo MLRK1-YAL6 Exit Device Kits, MLRK1-YAL6, Exit Device Kits, Device Kits, Kits |
